This updates all assembly source files under ArmVirtPkg to mark
exported functions as ASM_FUNC(), which puts them in a separate
section, allowing the linker to prune code that is left unused.
At the same time, clean up the code to get rid of LoadConstantToReg()
instances involving symbol references, each of which emits an absolute
literal, and hence and entry in the PE/COFF .reloc table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ArmVirtPkg platforms that use PrePi have no notion of boot remapped
aliases, so we can simply jump to CEntryPoint() directly rather than
via an absolute reference.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This introduces the ASM_FUNC() macro to annotate function entry points
in assembler files. This allows us to add additional metadata that
marks a function entry point as a function, and allows us to emit
a .section directive for each function, which makes it possible for
the linker to drop unreferenced code.
In addition, introduce a couple of utility macros that we can use to
clean up the code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The RVCT .asm files include AsmMacroIoLib.h only for the definition of
LoadConstantToReg (), which makes it tedious to make change to that file
without the risk of making the RVCT assembler unhappy. So simply replace
LoadConstantToReg() with mov32, which does the right thing in all cases.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This removes the various Mmio ASM macros that are not used anywhere in
the code, and removes some variants of LoadConstant... () that are not
used anywhere either.
Note that these MmioXxx() implementations are unrelated to the C versions
defined in MdePkg. These are strictly intended for use in assembler, and
no such uses remain.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The function ArmReplaceLiveTranslationEntry() has been moved to
ArmMmuLib, so remove the old implementation from ArmLib.
Note that the new implementation was not exported from the object file,
and so references to it were satisfied by the old version residing in
ArmLib. Since we are removing that one, we need to export the new one
at the same time to prevent the linker from bailing with undefined
reference errors.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When comparing the L"OFFSET=" with the ConfigResp string to find
all the "OFFSET=" in ConfigResp, should skip the character "&"
before "OFFSET=" in ConfigResp string.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In latest UEFI2.6 spec, the type of the fourth parameter in function
GetImageInfo() is "EFI_IMAGE_OUTPUT", but in the header file, it is
"EFI_IMAGE_INPUT". Now correct it to follow the spec.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Cecil Sheng <cecil.sheng@hpe.com>
Cc: Abner Chang <abner.chang@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add a new implementation policy of getting default value in SetupBrowser.
The new policy is only for the situation that a question has default
value but doesn't have default value for all supported default type.
In this case, we will choose the smallest default id from the existing
defaults, and share its value to other default id which has no
default value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add a new implementation policy of getting default value in HiiDatabase.
The new policy is only for the situation that a question has default
value but doesn't have default value for all supported default type.
In this case, we will choose the smallest default id from the existing
defaults, and share its value to other default id which has no
default value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
It's "OpensslLib", not "OpenSslLib" - not a big issue, but the
typo is annoying when trying to copy-n-paste the path name to
use it on the command line on Linux.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Both the ARM and the AARCH64 versions of the PrePi code (shared between
ArmVirtQemuKernel and ArmVirtXen) 'preserve' values across a function
call using registers that are not in fact callee saved. So fix that.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Add EFIAPI in CatPrint library function. Every function which uses
variable list need explicit use EFIAPI to force use MS ABI. This change
is needed to pass CLANG38 build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Use explicit CopyMem to replace compiler builtin to do the structure
values assignment. This change is needed to pass CLANG38 build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This adds support for LLVM 3.8.x in LTO mode for IA32 and X64.
CLANG38 enable LLVM Link Time Optimization (LTO) and code size
optimization flag (-Oz) by default for aggressive code size
improvement. CLANG38 X64 code is small code model + PIE.
CLANG LTO needs PIE in link flags to generate PIE code correctly,
otherwise the PIE is not really enabled. (e.g. OvmfPkgX64 will
hang in 64bits SEC at high address because of small model code
displacement overflow).
Test pass platforms: OVMF (OvmfPkgIa32.dsc, OvmfPkgX64.dsc and
OvmfPkgIa32X64.dsc).
Test compiler and linker version: LLVM 3.8, GNU ld 2.26.
Example steps to use the CLANG38 tool chain to build OVMF platform:
1. Download and extract the llvm 3.8.0 Pre-Built Binaries from
http://www.llvm.org/releases/ (e.g. http://www.llvm.org/releases/
3.8.0/clang+llvm-3.8.0-x86_64-linux-gnu-ubuntu-16.04.tar.xz and
extract it as ~/clang38).
2. Copy LLVMgold.so from https://github.com/shijunjing/edk2/blob/
llvm/BaseTools/Bin/LLVMgold.so to above clang lib folder (e.g.
~/clang38/lib/LLVMgold.so)
3. Install new version linker with plugin support (e.g. ld 2.26 in
GNU Binutils 2.26 or Ubuntu16.04)
$ cd edk2
$ git checkout llvm
$ export CLANG38_BIN=path/to/your/clang38/
(e.g. export CLANG38_BIN=~/clang38/bin/)
$ source edksetup.sh
$ make -C BaseTools/Source/C
$ build -t CLANG38 -a X64 -p OvmfPkg/OvmfPkgX64.dsc -n 5 -b DEBUG
-DDEBUG_ON_SERIAL_PORT
$ cd edk2/Build/OvmfX64/DEBUG_CLANG38/FV
$ qemu-system-x86_64.exe -bios OVMF.fd -serial file:serial.log -m 4096
-hda fat:.
If you want, you can build and install GNU Binutils 2.26 as below steps
in Ubuntu:
Download binutils-2.26 source code from http://ftp.gnu.org/gnu/binutils/
and extract it to ~/binutils-2.26
$sudo apt-get install bison
$sudo apt-get install flex
Install other necessary binutils build tools if missing
$ mkdir build
$ cd build
$ ../binutils-2.26/configure --enable-gold --enable-plugins
--disable-werror --prefix=/usr
$ make -j 5
$ sudo make install
If you want, you can build LLVMgold.so as below steps
Download llvm-3.8.0 source code from http://www.llvm.org/releases/
3.8.0/llvm-3.8.0.src.tar.xz and extract it to ~/llvm-3.8.0.src
Download clang3.8.0 source code from http://www.llvm.org/releases/
3.8.0/cfe-3.8.0.src.tar.xz and extract it to ~/llvm-3.8.0.src/tools/clang
Refer http://clang.llvm.org/get_started.html to Install other necessary
clang build tools if missing
$ mkdir llvm38build
$ cd llvm38build
If your GNU Binutils 2.26 is in /home/jshi19/binutils-2.26,
$ cmake ../llvm-3.8.0.src -G "Unix Makefiles" -DCMAKE_BUILD_TYPE="Release"
-DLLVM_TARGETS_TO_BUILD="X86" -DCMAKE_VERBOSE_MAKEFILE=ON
-DCMAKE_CXX_COMPILER="/usr/bin/g++" -DCMAKE_C_COMPILER="/usr/bin/gcc"
-DLLVM_BINUTILS_INCDIR=/home/jshi19/binutils-2.26/include
$ make -j 5 LLVMgold The LLVMgold.so is in ~/llvm38build/lib/LLVMgold.so
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Both binutils ar and LLVM ar support "cr", but LLVM ar doens't
support add "-" in the flags, and llvm-ar cannot accept "-cr".
So remove the short dash "-" to make llvm archives work.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
“ls fs0:\File.txt" can list the file correctly but
when the backslash is removed from colon, the file cannot
be listed.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
The original implementation only looks for very last backslash
and removes the string after that.
But when the path is like "FS0:File.txt" which doesn't contain
backslash, the function cannot work well.
The patch enhances the code to look for very last backslash or
colon to support the path which doesn't contain backslash.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
When the FilePattern is similar to "fsx:EFI\BOOT", FindFiles()
cannot handle it correctly because it always assumes there is
"\\" after "fsx:".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
It should shows files in root directory of current map.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
The memset() function is a compiler intrinsic on AARCH64 and ARM, and
so is memmove() on ARM. Usually, redefining them as LibC currently does
is not a problem since only one version will be selected at link time
from the various static libraries that provide implementations. However,
under LTO, this is slightly different, since explicit references (in the
C code) and implicit references (emitted by the compiler backend) may
resolve to different versions (LTO vs non-LTO), causing conflicts.
So simply omit them for ARM/AARCH64 resp. ARM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The softfloat routines and some other routines supplied by LibC
will satisfy references to compiler intrinsics that are emitted
by the compiler backend, which under LTO means that the link-time
code generation may emit references to symbols that have been
optimized away already.
Work around this by building the ARM and AARCH64 versions of LibC
and the softfloat library without LTO.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Given that we only support ARMv7 and up in Tianocore (due to the fact
that the PI spec mandates that the PEI services table pointer be stored
in the TPIDRURW register, which is not available on earlier CPUs), we can
assume that any code executing with the MMU on may perform unaligned
accesses (since the AArch32 bindings in the UEFI spec stipulate that
unaligned accesses should be allowed if supported by the CPU)
So relax the alignment restrictions to XIP modules only, i.e., BASE, SEC,
PEI_CORE and PEIM type modules, exactly like we do for AARCH64 already.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When building for AARCH64, code that may execute with the MMU off should
not perform unaligned accesses, which is why we set -mstrict-align for
BASE, SEC, PEI_CORE and PEIM modules when building with GCCx. However,
this setting is missing from CLANG35 so set it there as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Fix a corner case issue of installing a module without
any files which causes installing UNI file failure
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This commit fixes a bug in the GIC v2 and v3 drivers where the GICC_EOIR
(End Of Interrupt Register) is written twice for a single interrupt.
GicV(2|3)IrqInterruptHandler() calls the Interrupt Handler and then
GicV(2|3)EndOfInterrupt() on exit:
InterruptHandler = gRegisteredInterruptHandlers[GicInterrupt];
if (InterruptHandler != NULL) {
// Call the registered interrupt handler.
InterruptHandler (GicInterrupt, SystemContext);
} else {
DEBUG ((EFI_D_ERROR, "Spurious GIC interrupt: 0x%x\n", GicInterrupt));
}
GicV2EndOfInterrupt (&gHardwareInterruptV2Protocol, GicInterrupt);
although gInterrupt->EndOfInterrupt() can be expected to have already
been called by InterruptHandler() [which is the case for the primary
in-tree handler in TimerDxe]
The fix moves the EndOfInterrupt() call inside the else case for
unregistered/spurious interrupts. This removes a potential race
condition that might have lost interrupts.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Alexei Fedorov <alexei.fedorov@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Converted the the word format of the documentation into markdown format
for PatchFv.py
V2: updated the commit message descripton
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Satya Yarlagadda <satya.p.yarlagadda@intel.com>
Cc: Satya Yarlagadda <satya.p.yarlagadda@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Converted the the word format of the documentation into markdown format
for GenCfgOpt.py
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Satya Yarlagadda <satya.p.yarlagadda@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
It is to make the info shown more aligned with SMBIOS spec.
Cc: Amy Chan <amy.chan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Amy Chan <amy.chan@intel.com>
For X64/GCC, we use position independent code with hidden visibility
to inform the compiler that symbol references are never resolved at
runtime, which removes the need for PLTs and GOTs. However, in some
cases, GCC has been reported to still emit PLT based relocations, which
we need to handle in the ELF to PE/COFF perform by GenFw.
Unlike GOT based relocations, which are non-trivial to handle since the
indirections in the code can not be fixed up easily (although relocation
types exist for X64 that annotate relocation targets as suitable for
relaxation), PLT relocations simply point to jump targets, and we can
relax such relocations by resolving them using the symbol directly rather
than via a PLT entry that does nothing more than tail call the function
we already know it is going to call (since all symbol references are
resolved in the same module).
So handle R_X86_64_PLT32 as a R_X86_64_PC32 relocation.
Suggested-by: Steven Shi <steven.shi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1.--autodefault option
VfrCompile will generate default opcodes for questions if some
default are missing.
2 --checkdefault option
VfrCompile will check whether every question has no default or
has all default. If not, will generate an error to let user know
the question misses default.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
The function CheckQuestionOpCode is to check whether the opcode
is question opcode, but it misses two question opcodes:
'EFI_IFR_REF_OP' and 'EFI_IFR_RESET_BUTTON'. Now add them.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Qin Long <qin.long@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Ard Biesheuvel
Dandan Bi
Thomas Huth
Liming Gao
Shi, Steven
Ruiyu Ni
Hess Chen
Alexei Fedorov
Mudusuru, Giri P
Star Zeng
Hao Wu