REF: https://github.com/tianocore/tianocore.github.io/wiki/
UEFI-Capsule-on-Disk-Introducation
CoDCheckCapsuleOnDiskFlag() is to check if CapsuleOnDisk flag in
"OsIndications" Variable is enabled. It is used to indicate whether
capsule on disk is provisioned in normal boot path.
CoDClearCapsuleOnDiskFlag() is to to clear CapsuleOnDisk flags,
including "OsIndications" and "BootNext" variable.
CoDRelocateCapsule() is to relocate the capsules from EFI system
partition. Depends on PcdCapsuleInRamSupport, there are two solutions
to relocate the capsule on disk images:
When Capsule In Ram is supported, the Capsule On Disk images are
relocated into memory, and call UpdateCapsule() service to deliver
the capsules.
When Capsule In Ram is not supported, the Capsule On Disk images are
relocated into a temp file which will be stored in root directory on
a platform specific storage device. CapsuleOnDiskLoadPei PEIM will
retrieve the capsules from the relocation temp file and report
capsule hobs for them.
CoDRemoveTempFile() is to remove the relocation temp file in the next
boot after capsules are processed.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://github.com/tianocore/tianocore.github.io/wiki/
UEFI-Capsule-on-Disk-Introducation
This patch will add Capsule On Disk related definition, including
GUID, PPI and PCDs:
The Capsule On Disk Name GUID indicates the capsule is to store
Capsule On Disk file names.
The Pei Capsule On Disk PPI provides service to retrieve capsules
from Capsule On Disk temp relocation file on mass storage devices
and create capsule hob for these capsules.
Pei Boot In CapsuleOnDisk Mode Ppi indicates current boot mode is
capsule on disk mode.
PcdCapsuleOnDiskSupport is used to enable/disable Capsule On Disk.
PcdCapsuleInRamSupport is used to enable/disable Capsule In Ram.
PcdCoDRelocationFileName specifies the Capsule On Disk temp
relocation file name.
PcdCodRelocationDevPath specifies platform specific device to store
Capsule On Disk temp relocation file.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1879
This commit will add the definitions of Nvm Express PassThru PPI.
This PPI will provide services that allow NVM commands to be sent
to NVM Express devices during PEI phase.
More specifically, the PPI will provide services to:
* Sends an NVM Express Command Packet to an NVM Express controller
or namespace (by service 'PassThru');
* Get the list of the attached namespaces on a controller
(by services 'GetNextNameSpace');
* Get the identification information (DevicePath) of the underlying
NVM Express host controller (by service 'GetDevicePath').
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
https://github.com/tianocore/tianocore.github.io/wiki/UEFI-Capsule-
on-Disk-Introducation
CoDCheckCapsuleOnDiskFlag() is to check if CapsuleOnDisk flag in
"OsIndications" Variable is enabled. It is used to indicate whether
capsule on disk is provisioned in normal boot path.
CoDClearCapsuleOnDiskFlag() is to to clear CapsuleOnDisk flags,
including "OsIndications" and "BootNext" variable.
CoDRelocateCapsule() is to relocate the capsules from EFI system
partition. Depends on PcdCapsuleInRamSupport, there are two solutions
to relocate the capsule on disk images:
When Capsule In Ram is supported, the Capsule On Disk images are
relocated into memory, and call UpdateCapsule() service to deliver
the capsules.
When Capsule In Ram is not supported, the Capsule On Disk images are
relocated into a temp file which will be stored in root directory on
a platform specific storage device. CapsuleOnDiskLoadPei PEIM will
retrieve the capsules from the relocation temp file and report
capsule hobs for them.
CoDRemoveTempFile() is to remove the relocation temp file in the next
boot after capsules are processed.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
https://github.com/tianocore/tianocore.github.io/wiki/UEFI-Capsule-
on-Disk-Introducation
This patch will add Capsule On Disk related definition, including
GUID, PPI and PCDs:
The Capsule On Disk Name GUID indicates the capsule is to store
Capsule On Disk file names.
The Pei Capsule On Disk PPI provides service to retrieve capsules
from Capsule On Disk temp relocation file on mass storage devices
and create capsule hob for these capsules.
Pei Boot In CapsuleOnDisk Mode Ppi indicates current boot mode is
capsule on disk mode.
PcdCapsuleOnDiskSupport is used to enable/disable Capsule On Disk.
PcdCapsuleInRamSupport is used to enable/disable Capsule In Ram.
PcdCoDRelocationFileName specifies the Capsule On Disk temp
relocation file name.
PcdCodRelocationDevPath specifies platform specific device to store
Capsule On Disk temp relocation file.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
SERIAL_DXE_FILE_GUID is used in different places, create a single
define that other can use. Also fix SerialDxe to actually use
EDKII_SERIAL_PORT_LIB_VENDOR_GUID in the device path instead of the
FILE_GUID.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190606131459.1464-2-anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1722
Since we have merged this one into MdePkg,
remove it now.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1458
Add a new API ResetSystemWithSubtype's prototype declaration in
header file. Also add the required data type header file.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Introduce a protocol that can be invoked by the image loading services
to execute foreign architecture PE/COFF images via an emulator.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1683
We will remove IntelFrameworkModulePkg,
but BaseUefiTianoCustomDecompressLib may still need
to be used. So move BaseUefiTianoCustomDecompressLib
from IntelFrameworkModulePkg to MdeModulePkg.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1549
Add a debug PPI for PEI phase. This PPI will provide basic
services of debug. PEI debug lib instance can use these
services to implement debug function to reduce the PEIMs
which consume the debug lib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1536
To avoid the confusion caused by function name,
rename EfiBootManagerGetNextFullDevicePath to
EfiBootManagerGetNextLoadOptionDevicePath.
As an API function should add EFIAPI prefix for this function.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add the new API ResetSystem in the related head file so that
the consumer can use it through the combination of library
instance and head file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the support to enlarge a LockBox when using the
LockBoxLib API UpdateLockBox().
Please note that the new support will ONLY work for LockBox with attribute
LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY set.
The functional uni-test for the commit is available at:
https://github.com/hwu25/edk2/tree/lockbox_unitest
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the GUID definitions for LockBox which is used to
save a list of storage devices that need to get initialized during the S3
resume.
The content of the LockBox will be a DevicePath structure that contains
zero or more DevicePath instances. Each instance denotes a storage device
that needs to get initialized during the S3 resume.
The producers of the content of this LockBox will be drivers like
OpalPassword DXE driver. This kind of drivers requires some specific
storage devices to be initialized during the PEI phase of in S3 resume.
(For the OpalPassword case, it requires the managing devices to be
automatically unlocked during the S3 resume).
The attribute of the LockBox should be set to
LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY.
The consumers of the content of this LockBox will be PEI storage device
controller/bus drivers (e.g. NvmExpressPei) during S3 resume. This kind of
drivers can use the DevicePath instances stored in the LockBox to get a
list of devices that need to get initialized. In such way, an on-demand
(partial) device enumeration/initialization can be performed to benefit
the S3 resume performance.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the definitions for Storage Security Command (SSC)
PPI. This PPI will be be used to abstract mass storage devices to allow
code running in the PEI phase to send security protocol commands to mass
storage devices without specific knowledge of the type of device or
controller that manages the device.
More specifically, the PPI will provide services to:
* Get the number of mass storage devices managed by a instance of the SSC
PPI (by service 'GetNumberofDevices');
* Get the identification information (DevicePath) of a managing mass
storage devices (by service 'GetDevicePath');
* Send security protocol commands to mass storage devices (by services
'ReceiveData' and 'SendData').
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the definitions for EDKII PEI ATA PassThru PPI. This
PPI will provide services that allow ATA commands to be sent to ATA
devices attached to an ATA controller in the PEI phase.
More specifically, the PPI will provide services to:
* Send ATA commands to an ATA device (by service 'PassThru');
* Get the list of the attached ATA device on a controller (by services
'GetNextPort' and 'GetNextDevice');
* Get the identification information (DevicePath) of the underlying ATA
host controller (by service 'GetDevicePath').
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the definitions for ATA AHCI host controller PPI. The
purpose of the PPI in to provide:
* MMIO base address
* Controller identification information (DevicePath)
for ATA host controllers working under AHCI mode.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1482
Add a new function to support Capsule-on-Disk feature.
This function is used to get next full DevicePath from a load option.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Some SdMmc host controllers are run by clocks with different
frequency than it is reflected in Capabilities Register 1.
It is allowed by SDHCI specification ver. 4.2 - if BaseClkFreq
field value of the Capability Register 1 is zero, the clock
frequency must be obtained via another method.
Because the bitfield is only 8 bits wide, a maximum value
that could be obtained from hardware is 255MHz.
In case the actual frequency exceeds 255MHz, the 8-bit BaseClkFreq
member of SD_MMC_HC_SLOT_CAP structure occurs to be not sufficient
to be used for setting the clock speed in SdMmcHcClockSupply
function.
This patch adds new UINT32 array ('BaseClkFreq[]') to
SD_MMC_HC_PRIVATE_DATA structure for specifying
the input clock speed for each slot of the host controller.
All routines that are used for clock configuration are
updated accordingly.
This patch also adds new IN OUT BaseClockFreq field
in the Capability callback of the SdMmcOverride,
protocol which allows to update BaseClkFreq value.
The patch reuses original commit from edk2-platforms:
20f6f144d3a8 ("Marvell/Drivers: XenonDxe: Allow overriding base clock
frequency")
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Some SD Host Controlers need to do additional operations after clock
frequency switch.
This patch add new callback type to NotifyPhase of the SdMmcOverride
protocol. It is called after SdMmcHcClockSupply.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Some SD Host Controllers use different values in Host Control 2 Register
to select UHS Mode. This patch adds a new UhsSignaling type routine to
the NotifyPhase of the SdMmcOverride protocol.
UHS signaling configuration is moved to a common, default routine
(SdMmcHcUhsSignaling). After it is executed, the protocol producer
can override the values if needed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
In order to ensure bigger flexibility in the NotifyPhase
routine of the SdMmcOverride protocol, enable using an
optional phase-specific data. This will allow to exchange
more information between the protocol producer driver
and SdMmcPciHcDxe in the newly added callbacks.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch updates IP4 stack to support 32bit subnet mask in PXE boot process.
When 32bit subnet mask is used, the IP4 driver couldn't use the subnet mask to determine
whether destination IP address is on-link or not, so it will always try to send all the
packets to the destination IP address directly first, if failed it will continue
to try the default gateway.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The patch adds a new API PlatformBootManagerUnableToBoot()
to PlatformBootManagerLib.
The new API is provided by platform bds library and is called when
no boot option could be launched.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
It is caused by change d1102dba72.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Update the performance library instances in MdeModulePkg
to implement the APIs used for new added Perf macros.
V2:
Share the common logics of creating FPDT record for
new added Perf macros and existing Perf macros.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove the definitions of performance identifier since they
have been added into PerformanceLib.h.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Introduces the below PPI:
struct EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI {
EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR GetNvmeHcMmioBar;
EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH GetNvmeHcDevicePath;
};
The GetNvmeHcMmioBar service will provide the caller with the MMIO BAR
address of each NVMe HC within the system;
The GetNvmeHcDevicePath service will provide the caller with the device
path information of each NVMe HC.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The patch adds AtaAtapiPolicy protocol which is produced by platform
and consumed by AtaAtapiPassThruDxe driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=801
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport
Add the DisplayUpdateProgressLib class that is used
to inform the user of progress during updates of
firmware images in firmware devices. A platform
specific instance of this library can be used to
customize how the user is informed of progress.
Add the EDK II Firmware Management Progress Protocol.
This is an optional protocol that must be installed
onto the same handle as a Firmware Management Protocol.
This new protocol provides the color of a progress
bar that allows different firmware devices to use
different colors during a firmware update. It also
provides a watchdog timer value in seconds that is
armed each time the Progress() service passed
into Firmware Management Protocol SetImage()
is called.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Clean up the leading comment and the prototype of
EfiBootManagerAddLoadOptionVariable():
- the function may modify Option on output, annotate the parameter with
OUT and update the documentation;
- "@retval EFI_STATUS" and "@retval Others" are not idiomatic
documentation, use @return instead;
- sync comment and prototype between lib instance and lib class header.
Change-Id: I8a609d6502b6f8929b2f568acaa147065003b6f4
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
1. Fix some "support" to "supported".
2. Fix some "set" to "clear" in ClearMemoryAttributes interface.
3. Remove redundant comments for GetMemoryAttributes interface.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add Translation field to PCI_ROOT_BRIDGE_APERTURE. Translation is used
to represent the difference between device address and host address,
if they are not the same on some platforms.
In UEFI 2.7, "Address Translation Offset" is "Offset to apply to the
Starting address to convert it to a PCI address". This means:
Translation = device address - host address
So we also use the above calculation for this Translation field to
keep consistent.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Remove PCD_TYPE_SKU_ENABLED in PCD_TYPE_ALL_SET.
This change was missing at e8d2a98052.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Thomas Lamprecht <t.lamprecht@proxmox.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eric Dong <eric.dong@intel.com>
PcdDb optimization has handled PCD DB for each SKU, not for single PCD.
So, this PCD attribute is not used any more.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
With this flag, the LockBox can be restored in S3 resume only.
The LockBox can not be restored after SmmReadyToLock in normal boot
and after EndOfS3Resume in S3 resume.
It can not be set together with LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add gEdkiiS3SmmInitDoneGuid, after S3 SMM initialization is done and
before S3 boot script is executed, this GUID is installed as PPI in
PEI and protocol in SMM environment. It allows for PEIMs or SMM
drivers to hook this point and do the required tasks.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=799
Based on content from the following branch/commit:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport33bab4031a
Add new Boot Logo 2 Protocol that adds a GetBootLogo()
service that can be used to retrieve the GOP BLT buffer,
location, and size of the boot logo that was previously
registered with the SetBootLogo() service.
The Boot Logo 2 Protocol service GetBootLogo() is amended
to return the pointer to the GOP BLT buffer previously
registered with the SetBootLogo() service.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Remove the definitions related to old perf codes.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=800
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport33bab4031aca516b1a612b9f111f2e
Add BmpSupportLib class and instances that provides services to
convert a BMP graphics image to a GOP BLT buffer and to convert
a GOP BLT buffer to a BMP graphics image.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
The Reset Notification protocol is added in UEFI spec to support
reset notification mechanism in the DXE phase.
This patch adds similar EDKII specific Reset Notification PPI to PEI
phase to provide the same support.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
The library class that provides services to generate a GUID specific
reset, parse the GUID from a GUID specific reset, and build the
ResetData buffer for any type of reset that requires extra data.
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add support for platform specific reset filters and platform
specific reset handlers to ResetSystem(). A filter may modify
the reset type and reset data and call ResetSystem() with the
modified parameters. A handler performs the reset action.
The support for platform specific filters and platform specific
handlers is based on the Reset Notification feature added to the
UEFI 2.7 Specification.
Platform specific reset filters are processed first so the final
reset type and reset data can be determined. In the DXE Phase
The UEFI Reset Notifications are processed second so all UEFI
Drivers that have registered for a Reset Notification can perform
any required clean up actions. The platform specific reset
handlers are processed third. If there are no registered
platform specific reset handlers or none of them reset the
platform, then the default reset action based on the
ResetSystemLib is performed.
In the PEI Phase, filters and handlers are registered through
the following 2 PPIs that are based on
EFI_RESET_NOTIFICATION_PROTOCOL.
* gEdkiiPlatformSpecificResetFilterPpiGuid
* gEdkiiPlatformSpecificResetHandlerPpiGuid
In the DXE Phase, filters and handlers are registered through
the following 2 Protocols that are based on
EFI_RESET_NOTIFICATION_PROTOCOL.
* gEdkiiPlatformSpecificResetFilterProtocolGuid
* gEdkiiPlatformSpecificResetHandlerProtocolGuid
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Install IOMMU PPI for pre-memory phase and return
EFI_NOT_AVAILABLE_YET to indicate that DMA protection has been enabled,
but DMA buffer are not available to be allocated yet.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Many ARM based SoCs have integrated SDHCI controllers, and often,
these implementations deviate in subtle ways from the pertinent
specifications. On the one hand, these deviations are quite easy
to work around, but on the other hand, having a collection of SoC
specific workarounds in the generic driver stack is undesirable.
So let's introduce an optional SD/MMC override protocol that we
can invoke at the appropriate moments in the device initialization.
That way, the workaround itself remains platform specific, but we
can still use the generic driver stack on such platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
* In DxeIpIo, there are several places use ASSERT() to check input
parameters without and descriptions or error handling. This patch
fixed this issue.
* Fixed some incorrect descriptions in code commence.
* Remove unneeded Exit tag in function IpIoOpen and IpIoConfigIp.
* Add EFIAPI tag for function IpIoRefreshNeighbor.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
* The library API use array elements without any index range check, this
patch is to fix this issue to avoid null pointer reference.
V2
* Added an ASSERT check for the case PrefixLength equals to IP6_PREFIX_MAX.
* Synced some code descriptions to head file.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
* Added some ASSERT descriptions for library APIs.
* Added "Optional" option for Context parameter in UdpIoCancelDgrams().
* Added function return status check for UdpIoFreeIo().
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com
https://bugzilla.tianocore.org/show_bug.cgi?id=546
BaseTools will generate the optimized PCD database to save the image size
at build time for multiple SKUs. The optimized PCD database layout will be like
below, the PCD database will be composed of the full default SKU data
(PCD_DATABASE_INIT) and the non-default SKU delta data(PCD_DATABASE_SKU_DELTA).
PCD driver will build HOB to store the full default SKU data, and patch HOB
data based on non-default SKU delta data for the SKU set by SetSku(),
it can save memory resource at boot time.
//
// PCD database layout:
// +---------------------------------+
// | PCD_DATABASE_INIT (DEFAULT SKU) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU A) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU B) |
// +---------------------------------+
// | ...... |
// +---------------------------------+
//
BaseTools, PCD database and driver updates are needed for this proposal.
For single SKU (default) case, this proposal is expected to have no impact.
For multi-SKU case, PCD database format will be changed.
So, PcdDataBase Version is also updated from 6 to 7.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=611
Add two PCDs and new PCD DB format definition
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch updates the DxeIpIoLib to check the input parameters before using.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
This patch updates some API descriptions in DxeIpIoLib to match the real
implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
In DxeIpIo, there are several places not check the returned value of called functions.
This patch is to add the error handling to these functions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This patch updates the DxeIpIoLib to return EFI_INVALID_PARAMETER instead of
ASSERT if the input pointers are not correct.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Rename SmmEndOfS3ResumeProtocolGuid to EndOfS3ResumeGuid as the GUID
may be used to install PPI in future to notify PEI phase code.
The references in UefiCpuPkg are also being updated.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
For TcpIoConnect() and TcpIoAccept(), this patch adds the check for Timeout event
before calling CheckEvent() service so as to avoid the unnecessary function call.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
DUAL_ADDRESS_CYCLE is missing in the EFI_UNSUPPORTED
return status description.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
A new API InitializeCpuExceptionHandlersEx() is introduced to support
initializing exception handlers with extra functionalities which need
extra init data, such as stack switch for Stack Guard feature.
EFI_STATUS
EFIAPI
InitializeCpuExceptionHandlersEx (
IN EFI_VECTOR_HANDOFF_INFO *VectorInfo OPTIONAL,
IN CPU_EXCEPTION_INIT_DATA *InitData OPTIONAL
);
By default, this method should include all functionalities implemented by
InitializeCpuExceptionHandlers(), plus extra initialization works, if any.
This is could be done by calling InitializeCpuExceptionHandlers() directly
in this method besides the extra works.
InitData is optional and its use and content are processor arch dependent.
The typical usage of it is to convey resources which have to be reserved
elsewhere and are necessary for the extra initialization of exception.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
In wireless connection, connecting state needs to be cared more
about. ECR 1772 redefined the state EFI_NOT_READY to represent
connecting state and can be retrieved from Aip protocol. This
patch adds a new API to check media state at a specified time
interval when network is connecting until the connection process
finishes or timeout.
V2:
* Return error status code directly when Aip protocol falied to detect
media rather than wait for another time's check.
* Set media state default value to EFI_SUCCESS since some platforms may
not support retrieving media state from Aip protocol.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The new protocol gEdkiiSmmMemoryAttributeProtocolGuid is intended for
PiSmmCore to be able to change memory page attributes for the sake of
heap guard feature.
This protocol provides three interfaces to get/set/clear page attribute.
struct _EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL {
EDKII_SMM_GET_MEMORY_ATTRIBUTES GetMemoryAttributes;
EDKII_SMM_SET_MEMORY_ATTRIBUTES SetMemoryAttributes;
EDKII_SMM_CLEAR_MEMORY_ATTRIBUTES ClearMemoryAttributes;
};
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2 update: Directly use NetIp4IsUnicast() to check station address in IP driver.
This patch is to follow RFC3021 which allows to use 31-bit mask
in point-to-point link.
If a 31-bit subnet mask is assigned to a point-to-point link, it
leaves the <Host-number> with only 1 bit. Consequently, only two
possible addresses may result:
{<Network-number>, 0} and {<Network-number>, -1}
These addresses have historically been associated with network and
broadcast addresses (see Section 2.2). In a point-to-point link with
a 31-bit subnet mask, the two addresses above MUST be interpreted as
host addresses.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Mark EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS as deprecated.
1. Make SetVariable/QueryVariableInfo return EFI_UNSUPPORTED with this
attribute
2. No change to GetVariable/GetNextVariableName
Also update several function descriptors accordingly
Cc: Long Qin <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Add gEdkiiSmmEndOfS3ResumeProtocolGuid which used by SmmCore to
notify smm drives that S3 resume has finished.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This IOMMU_PPI is to provide IOMMU abstraction in PEI.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=568
Use fixed data type in data structure and make the structure
be natural aligned.
Without this update, the code must assume DXE and SMM are using
same data type (same size of UINTN), but it may be not true at
some case, for example, after standalone SMM feature is enabled.
With this update, the data structure will be phase independent
and convenient for consumer to parse the data.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This protocol is to abstract DMA access from IOMMU.
1) Intel "DMAR" ACPI table.
2) AMD "IVRS" ACPI table
3) ARM "IORT" ACPI table.
There might be multiple IOMMU engines on one platform.
For example, one for graphic and one for rest PCI devices
(such as ATA/USB).
All IOMMU engines are reported by one ACPI table.
All IOMMU protocol provider should be based upon ACPI table.
This single IOMMU protocol can handle multiple IOMMU engines on one system.
This IOMMU protocol provider can use UEFI device path to distinguish
if the device is graphic or ATA/USB, and find out corresponding
IOMMU engine.
The IOMMU protocol provides 2 capabilities:
A) Set DMA access attribute - such as write/read control.
B) Remap DMA memory - such as remap above 4GiB system memory address
to below 4GiB device address.
It provides AllocateBuffer/FreeBuffer/Map/Unmap for DMA memory.
The remapping can be static (fixed at build time) or dynamic (allocate
at runtime).
4) AMD "SEV" feature.
We can have an AMD SEV specific IOMMU driver to produce IOMMU protocol,
and manage SEV bit.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Previous patch Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Previous patch Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Leo Duran <leo.duran@amd.com>
This API is used to display exception type and all processor context for debug
purpose.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Given the agreement on the edk2-devel regarding the fact that the
notion whether or not a 'platform has ACPI' is a universal one, move
the PlatformHasAcpi GUID to MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The reason is that we observe that a platform may use same Handler
for different context.
In order to support Unregister such handler, we have to input
context information as well.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The commit refines the comment description for EFI_PRINT2S_PROTOCOL
service ASCII_VALUE_TO_STRING_S.
This service will not ASSERT when the input/output parameter 'Buffer' is
not aligned on a 16-bit boundary.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For pointer subtraction, the result is of type "ptrdiff_t". According to
the C11 standard (Committee Draft - April 12, 2011):
"When two pointers are subtracted, both shall point to elements of the
same array object, or one past the last element of the array object; the
result is the difference of the subscripts of the two array elements. The
size of the result is implementation-defined, and its type (a signed
integer type) is ptrdiff_t defined in the <stddef.h> header. If the result
is not representable in an object of that type, the behavior is
undefined."
In our codes, there are cases that the pointer subtraction is not
performed by pointers to elements of the same array object. This might
lead to potential issues, since the behavior is undefined according to C11
standard.
Also, since the size of type "ptrdiff_t" is implementation-defined. Some
static code checkers may warn that the pointer subtraction might underflow
first and then being cast to a bigger size. For example:
UINT8 *Ptr1, *Ptr2;
UINTN PtrDiff;
...
PtrDiff = (UINTN) (Ptr1 - Ptr2);
The commit will refine the pointer subtraction expressions by casting each
pointer to UINTN first and then perform the subtraction:
PtrDiff = (UINTN) Ptr1 - (UINTN) Ptr2;
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This header file defines:
1) An SMI handler profile protocol. So that SmmChildDispatch
module can register the hardware SMI handler information.
2) The SMI handler profile communication buffer. So that
a shell application can use SMM communication to get the
SMI handler profile info.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Add the EFI_PRINT2S_PROTOCOL as a safe version of the EFI_PRINT2_PROTOCOL,
the EFI_PRINT2S_PROTOCOL replaces the following 2 services in
EFI_PRINT2_PROTOCOL:
UNICODE_VALUE_TO_STRING
ASCII_VALUE_TO_STRING
with:
UNICODE_VALUE_TO_STRING_S
ASCII_VALUE_TO_STRING_S
The 2 new services perform checks to the input parameters and will return
relative status to reflect the check result.
Return RETURN_INVALID_PARAMETER when:
1). The input Buffer is NULL.
2). The input BufferSize is greater than (PcdMaximumUnicodeStringLength *
sizeof (CHAR16) + 1) for UnicodeValueToStringS or greater than
PcdMaximumAsciiStringLength for AsciiValueToStringS.
3). The input Flags is not set properly.
4). The input Width is not smaller than MAXIMUM_VALUE_CHARACTERS.
Return RETURN_BUFFER_TOO_SMALL when:
1). The input BufferSize cannot hold the converted value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For the following 8 services in EFI_PRINT2_PROTOCOL:
UNICODE_BS_PRINT
UNICODE_S_PRINT
UNICODE_BS_PRINT_ASCII_FORMAT
UNICODE_S_PRINT_ASCII_FORMAT
ASCII_BS_PRINT
ASCII_S_PRINT
ASCII_BS_PRINT_UNICODE_FORMAT
ASCII_S_PRINT_UNICODE_FORMAT
They will ASSERT when:
1) The input parameter 'StartOfBuffer' is NULL if 'BufferSize' indicates
at least 1 Ascii/Unicode character can be held.
2) The input parameter 'FormatString' is NULL if 'BufferSize' indicates at
least 1 Ascii/Unicode character can be held.
3) The input parameter 'FormatString' contains more than
PcdMaximum[Ascii|Unicode]StringLength Ascii/Unicode characters.
4) The produced string contains more than
PcdMaximum[Ascii|Unicode]StringLength Ascii/Unicode characters.
This commits removes the ASSERT case 4) and add the following new ASSERT
case:
4) The input parameter 'BufferSize' is greater than
(PcdMaximumAsciiStringLength * sizeof (CHAR8)) for Ascii format string or
(PcdMaximumUnicodeStringLength * sizeof (CHAR16) + 1) for Unicode format
string.
And for those ASSERT cases, 0 will be returned by those services.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Non-discoverable devices need to be registered explicitly by the platform.
Introduce a helper library that takes care of this.
This implementation currently only supports registering devices that are
covered by one or more MMIO resources. The underlying protocol allows for
more flexibility than that, but this is currently sufficient for the use
cases that we know about.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Wei6 Xu
Chu, Maggie
Zhang, Chao B
Anthony PERARD
Liming Gao
Dandan Bi
Bret Barkelew
Zhichao Gao
Ard Biesheuvel
Michael D Kinney
Chen A Chen
Hao Wu
Marcin Wojtas
Tomasz Michalec
Star Zeng
Fu Siyuan
Ruiyu Ni
Eric Dong
Heyi Guo
Bret Barkelew
Wang Fan
Jiaxin Wu
Jian J Wang
Song, BinX
Jiewen Yao
Jeff Fan