Add DEBUG messages for TPM2Startup to distinguish between TPM_RC_SUCCESS
and TPM_RC_INITIALIZE. This helps debugging some hardware problems.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Remove the references to DuetPkg. Copy the files from revision
ffea0a2ce2 of DuetPkg into
CorebootModulePkg. The components include:
* PciBusNoEnumerationDxe
* PciRootBridgeNoEnumerationDxe
* SataControllerDxe
TEST=Build and run on Galileo Gen2
Change-Id: Id07185f7e226749e5f7c6b6cb427bcef7eac8496
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Remove trailing white space from existing .dsc and .fdf files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
When combining UEFI firmware built from Tianocore with ARM Trusted
Firmware running in EL3, it is the responsibility of ATF that only
a single core enters the UEFI firmware in EL2, and the remaining cores
are released directly to the OS via PSCI SMC calls.
In this case, we don't need the MpCore flavor of PrePi or PrePeiCore,
but the UniCore flavor currently checks the CPU identification registers
directly, and refuses to proceed if the boot CPU is part of a MpCore
system.
So drop the ASSERT()'s that implement this check.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The CpuIo2 protocol is required by the generic PciHostBridgeDxe driver,
which relies on it to back its own I/O and MMIO operations.
Since ARM has no native I/O port equivalent, such accesses can only
originate from PCI drivers, and the PCI I/O space is translated to MMIO
in this case.
So we can implement this protocol using MMIO operations only, and take
the PCI I/O translation offset into account when performing I/O port
accesses.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The PCI related PCDs are not platform specific, and architectural
protocols such as CpuIo2 are based on PCI provided MMIO to IO
translation, so these PCDs belong in ArmPkg not ArmPlatformPkg.
NOTE: this *WILL* break some out-of-tree platforms, the fix is changing
all consumers of gArmPlatformTokenSpaceGuid.PcdPci* to
gArmTokenSpaceGuid.PcdPci*
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Set the ImageContext.Handle and ImageContext.ImageRead() fields so that
PeCoffLoaderRelocateImageExtraAction() can invoke PeCoffLoaderGetImageInfo
or PeCoffLoaderGetPeHeader if desired to obtain additional metadata.
We will use this to create a PeCoffLoaderRelocateImageExtraAction()
implementation that applies boot time strict mapping permissions to
PE/COFF modules.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If the current PCI configuration requires no resources to be allocated at
all (i.e., unpopulated bus), the PCI enumeration code creates a single
ACPI_ADDRESS_SPACE_DESCRIPTOR memory descriptor with all fields cleared.
This is rejected by the SubmitResources() implementation of the generic
PciHostBridgeDxe in the following way:
PciHostBridge: SubmitResources for PcieRoot(0x0)
Mem: Granularity/SpecificFlag = 0 / 00
Length/Alignment = 0x0 / 0x0
PciBus: HostBridge->SubmitResources() - Invalid Parameter
ASSERT_EFI_ERROR (Status = Invalid Parameter)
ASSERT [PciBusDxe] .../PciBusDxe/PciLib.c(561): !EFI_ERROR (Status)
So instead, create the empty configuration as a single entry of type
EFI_ACPI_END_TAG_DESCRIPTOR.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Description:
When building for any specific architecture, the build script today is loading
DSC sections for other architectures not in the build. The build process should
disregard DSC sections that are not relevant to the build.
My previous patch only fixed issue for one section type (Components). This
patch will handle all section types by updating the MetaFileParser class, which
now takes a Arch argument and will filter the DSC table results as they are
returned from the database. The database still contains all information from
DSCs for when builds support multiple arch's
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Fix the bug for FMP image to support to use Macro as path description,
eg: FILE DATA = $(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/test.efi
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch adds more check in SmmIsBufferOutsideSmmValid(), to make sure that
SMM communication buffer is only EfiReservedMemoryType/EfiRuntimeServicesCode/
EfiRuntimeServicesData/EfiACPIMemoryNVS. So that the communication buffer will
not touch any OS memory.
The assumption is that a platform reports valid SMM communication buffer at
EndOfDxe, because EndOfDxe is last hook point that SMM code can call-out to
get memory map information.
A platform MUST finish SMM communication buffer allocation before EndOfDxe.
If a DXE or OS driver need do communication after EndOfDxe, it can either
allocate SMM communication buffer before EndOfDxe and save it, or consume
EDKII_PI_SMM_COMMUNICATION_REGION_TABLE table to get general fixed comm buffer.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This patch enhance OPAL password SMM driver to check SMM bar is valid MMIO
besides outside of SMRAM.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch enhance OPAL password lib SMM communication by using fixed
SMM communication buffer.
Update OPAL password lib to consume EDKII_PI_SMM_COMMUNICATION_REGION_TABLE
as fixed communication buffer for SMM communication.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch enhance performance data SMM communication by using fixed
SMM communication buffer.
Update PerformanceLib to use fixed SMM communication buffer to get
performance data by SMM_PERF_COMMUNICATE API.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch enhance performance data SMM communication by using fixed
SMM communication buffer.
Update FpdtDxe to use fixed SMM communication buffer to get
performance data by SMM_FPDT_FUNCTION_GET_BOOT_RECORD_DATA_BY_OFFSET API.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch enhance performance data SMM communication by using fixed
SMM communication buffer.
Update FpdtSmm to handle SMM_FPDT_FUNCTION_GET_BOOT_RECORD_DATA_BY_OFFSET
request.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch enhance performance data SMM communication by using fixed
SMM communication buffer.
A new command SMM_FPDT_FUNCTION_GET_BOOT_RECORD_DATA_BY_OFFSET is added,
because we need to support get partial PerformanceData to fixed SMM communication
buffer. If performance data is bigger than fixed SMM communication buffer,
the DXE agent need to call SMM_FPDT_FUNCTION_GET_BOOT_RECORD_DATA_BY_OFFSET
multiple times to get all data out.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch enhance SMM memory profile SMM communication by using fixed
SMM communication buffer.
Update MemoryProfileInfo APP to use fixed SMM communication buffer to get
profile data by SMRAM_PROFILE_COMMAND_GET_PROFILE_DATA_BY_OFFSET API.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch enhance SMM memory profile SMM communication by using fixed
SMM communication buffer.
Update PiSmmCore to handle SMRAM_PROFILE_COMMAND_GET_PROFILE_DATA_BY_OFFSET
request.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This patch enhance SMM memory profile SMM communication by using fixed
SMM communication buffer.
A new command SMRAM_PROFILE_COMMAND_GET_PROFILE_DATA_BY_OFFSET is added,
because we need to support get partial ProfileData to fixed SMM communication
buffer. If profile data is bigger than fixed SMM communication buffer,
the DXE agent need to call SMRAM_PROFILE_COMMAND_GET_PROFILE_DATA_BY_OFFSET
multiple times to get all data out.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add a driver to publish EDKII_PI_SMM_COMMUNICATION_REGION_TABLE, so that
other DXE driver can consume this table directly. NOTE: This is sample driver.
A platform may uses its own way to define default SMM communication buffer
region and publish information in its own
EDKII_PI_SMM_COMMUNICATION_REGION_TABLE.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng, Tian <feng.tian@intel.com>
This configuration table is used to describe platform pre-allocated memory
for SMM communication buffer. If DXE driver wants to communicate with SMM
agent, it can use this memory as SMM communication buffer instead of allocate
new memory region.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
v2:
* Refine the code to make it more readable.
This patch is used to support no source IP specified case while
multiple NICs existed in the platform. The command will select the
first both connected and configured interface automatically.
Note: Source address is always required when pinging a
link-local address.
Cc: Bhupesh Sharma <bhupesh.sharma@nxp.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2:
* A. Refine the code to make it more readable.
* B. Add hint message for link local address case.
This patch is used to support no source IP specified case
while multiple NICs existed in the platform. The command
will select the first both connected and configured interface
automatically.
Note: Source address is always required when pinging a
link-local address.
Cc: David Van Arnem <dvanarnem@cmlab.biz>
Cc: Bhupesh Sharma <bhupesh.sharma@nxp.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
In image verification, if image verified pass in DBT, still need to verify if it is blocked by any other cert/cert hash from DBX.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Dick Wilkins <dick_wilkins@phoenix.com>
Introduce the 32bit mask seeds to calculate Fixed-MTRR or&and mask values. It
could avoid the loop operation and 64bit shift operations.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add input fixed-MTRR MSR index to be start MSR index to avoid finding fixed-MTRR
MSR index from 0 at each time.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
At the moment, the EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is only installed if
S3 is enabled -- at the end of SaveS3BootScript().
While a runtime OS is never booted with SMM unlocked (because the SMM IPL
locks down SMM as a last resort:
> SMM IPL! DXE SMM Ready To Lock Protocol not installed before Ready To
> Boot signal
> SmmInstallProtocolInterface: [EfiSmmReadyToLockProtocol] 0
> Patch page table start ...
> Patch page table done!
> SMM IPL locked SMRAM window
), we shouldn't allow UEFI drivers and applications either to mess with
SMM just because S3 is disabled. So install
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL in PlatformBdsInit() unconditionally.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
OVMF's PlatformBdsLib currently makes SMM vulnerable to the following
attack:
(1) a malicious guest OS copies a UEFI driver module to the EFI system
partition,
(2) the OS adds the driver as a Driver#### option, and references it from
DriverOrder,
(3) at next boot, the BdsEntry() function in
"IntelFrameworkModulePkg/Universal/BdsDxe/BdsEntry.c" processes
Driver#### and DriverOrder between the calls to PlatformBdsInit() and
PlatformBdsPolicyBehavior(),
(4) OVMF locks down SMM only in PlatformBdsPolicyBehavior(), hence the
driver runs with SMM unlocked.
The BdsEntry() function of the MdeModulePkg BDS driver (in file
"MdeModulePkg/Universal/BdsDxe/BdsEntry.c") recommends to "Signal
ReadyToLock event" in PlatformBootManagerBeforeConsole() -- which
corresponds to PlatformBdsInit() --, not in
PlatformBootManagerAfterConsole() -- which corresponds to
PlatformBdsPolicyBehavior().
Albeit an independent question, but it's worth mentioning: this patch also
brings OvmfPkg's PlatformBdsInit() closer to ArmVirtPkg's. Namely, the
latter signals End-of-Dxe in PlatformBdsInit() already.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the edk2 tree, there are currently four drivers that consume
PcdAcpiS3Enable:
IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf
MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe/BootScriptExecutorDxe.inf
MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf
MdeModulePkg/Universal/Acpi/SmmS3SaveState/SmmS3SaveState.inf
From these, AcpiS3SaveDxe is the only one that isn't also a client of the
S3BootScriptLib class; all the others (BootScriptExecutorDxe,
S3SaveStateDxe, SmmS3SaveState) are clients of the S3BootScriptLib class.
In turn, the edk2 tree contains only one non-Null instance of the
S3BootScriptLib class:
MdeModulePkg/Library/PiDxeS3BootScriptLib/DxeS3BootScriptLib.inf
Therefore we can safely state that BootScriptExecutorDxe, S3SaveStateDxe,
and SmmS3SaveState are all linked against PiDxeS3BootScriptLib.
Now, if PcdAcpiS3Enable is FALSE when either of BootScriptExecutorDxe,
SmmS3SaveState, or SmmS3SaveState is dispatched, then the following
happens:
- The constructor of PiDxeS3BootScriptLib, function
S3BootScriptLibInitialize(), registers a protocol installation callback
for gEfiDxeSmmReadyToLockProtocolGuid. Namely, the function
S3BootScriptEventCallBack().
- The driver immediately exits with EFI_UNSUPPORTED from its entry point
function, upon seeing PcdAcpiS3Enable == FALSE. (See commits
800c02fbe2, 125e093876, and d2d38610603f6.)
- This leaves a dangling callback pointer in the DXE core.
- When Platform BDS installs gEfiDxeSmmReadyToLockProtocolGuid (which is a
valid thing to do for locking down SMM, even in the absence of S3
support!), things blow up.
Fix this issue by returning immediately from S3BootScriptLibInitialize()
if PcdAcpiS3Enable is FALSE -- it is useless to initialize the library
instance if the containing driver module exits first thing in its entry
point.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
FragmentBuffer of each TcpWrap in HttpDxe should not be
freed in HttpTcpTokenCleanup(). This buffer points to
HttpMsg body actually, which is the responsibility of the
caller to allocate a buffer for Body.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Need the timer check to avoid the indefinite wait case
in HttpDxe driver
A.HTTP receive Header process in HttpTcpReceiveHeader();
B.HTTP receive Body process in HttpTcpReceiveBody();
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Use 128 bytes as the start size region to be same to previous one.
64 bytes is small as the first range. On X64 arch, POOL_OVERHEAD
takes 40 bytes, the pool data less than 24 bytes can be fit into
it. But, the real allocation is few that can't reduce its free pool
link list. And, the second range (64~128) has more allocation
that also increases the free pool link list of the first range.
Then, the link list will become longer and longer. When LinkList
check enable in DEBUG tip, the long link list will bring the
additional overhead and bad performance. Here is the performance
data collected in our X64 platform with DEBUG enable.
64 byte: 22 seconds in BDS phase
128 byte: 19.6 seconds in BDS phase
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
The Hii runtime support feature will export the content of
HiiDatabase and the ConfigResp string to runtime buffer
after ReadyToBoot event is triggered. If some drivers
add/update/remove packages from Hiidatabase after ReadyToBoot:
Originally we will both export the content of HiiDatabase and
the ConfigResp string for all packages.
But now after investigation, we found only for form packages need
to export the content of HiiDatabase and the ConfigResp string,
for other packages just need to export the content of HiiDatabase.
Now to enhance this logic.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
HttpGenRequestString is updated to HttpGenRequestMessage,
with an additional argument. This patch updates the caller
of the DxeHttpLib API. Also, we will avoid adding any '\0'
to the string, which was added to make AsciiStrLen to
work on the string.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nagaraj Hegde <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Rename and update the logic of HttpGenRequestString API provided
by DxeHttpLib. The RequestString size is returned as an argument.
The user is not expected to do a AsciiStrLen anymore, and is not
logical too, since request string can contain message body and
using AsciiStrLen on such a string can provide truncated lengths.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nagaraj Hegde <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
This patch updates the HTTP Boot Configuration page to allow the user to create
a corporate mode HTTP boot option, by leaving the URI string empty.
The patch also fix a bug that the L"https://" should use StrnCmp() with Length 8.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Add #defines for "Expect" header, which is a part of RFC 2616
and used for HTTP PUT/POST operations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Per build spec, the .aml file should use ASL binary type in the Asbuilt
inf file. the original bug is .aml file may use BIN as binary type when
the module type is not BASE or USER_DEFINED. This patch 1) fix this bug.
2) fix some indent coding style issue.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current the FMP Capsule feature is supported, but its format has a little
different with FDF spec. so this patch 1) Align the FMP Capsule with FDF
spec. 2) fix some style issue, eg: Tab. 3) Add a SectionParser function to
check the section header info since this method is used in 7 places.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
It would be possible to remove the UAF without local variables, by calling
SataPrivateData->PciIo->Attributes() before releasing SataPrivateData.
However, by keeping the location of the call (for which temporary
variables are necessary), we continue to match the error path logic in
SataControllerStart(), which is always recommended.
Reported-by: wang xiaofeng <winggundum82@163.com>
Fixes: bcab714134
Cc: wang xiaofeng <winggundum82@163.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Samer El-Haj-Mahmoud
Leahy, Leroy P
Ard Biesheuvel
Thomas Palmer
Yonghong Zhu
Qiu Shumin
Jiewen Yao
Eric Dong
Liming Gao
Star Zeng
Jiaxin Wu
Feng Tian
Zhang, Chao B
Jeff Fan
Laszlo Ersek
Tapan Shah
Abdul Lateef Attar
Dandan Bi
Nagaraj Hegde
Fu Siyuan