Now that we have moved the handling of the xen,xen DT node to XenioFdtDxe,
remove its handling from VirtFdtDxe. Since the only functionality that
remains is handling the virtio,mmio DT node, rename VirtFdtDxe to
VirtioFdtDxe to reflect that. Also update the platforms that use this
driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that the only functionality that remains in VirtFdtDxe is enumerating
the respective virtual I/O buses, it no longer makes sense to have a driver
that is shared between Xen domU and QEMU. So move the Xen I/O DT node
handling to a new driver, and update ArmVirtXen to switch to it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that FdtClientDxe is the core driver that takes ownership of the host
supplied FDT, it makes sense to put it in charge of installing the FDT
configuration table as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This type is not used in the code, so drop the definitions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
We no longer care when VirtFdtDxe executes, since
- the driver sets no dynamic PCDs any longer, and
- the only remaining functionality centers on VirtioMmioInstallDevice()
and XenIoMmioInstall() function calls and FDT configuration table
installation.
So drop the A PRIORI declaration.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The RTC driver no longer relies on VirtFdtDxe to set the pl031 RTC base
address in a dynamic PCD, so drop the handling altogether.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This moves QEMU based platforms to ArmVirtPL031FdtClientLib, so that we no
longer have to rely on VirtFdtDxe to execute first and set the PL031 base
address in a dynamic PCD.
The only driver which [transitively] depends on this PcdPL031RtcBase PCD is
EmbeddedPkg/RealTimeClockRuntimeDxe, so this conversion cannot affect any
other users and is thus safe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This implements a library ArmVirtPL031FdtClientLib which is intended to
be incorporated into RealTimeClockRuntimeDxe via NULL library class
resolution. This allows us to make RealTimeClockRuntimeDxe depend on the
FDT client protocol, and discover the PL031 base address from the device tree
directly rather than relying on VirtFdtDxe to set the dynamic PCDs.
The NULL library class resolution approach to strictly order production and
consumption of dynamic PCDs is not generally safe in cases such as this one,
where the producer and the consumer of the PCD are both libraries. However,
since the PCD is produced in this library's constructor, and the consumer
library's constructor 'LibRtcInitialize' is not a 'true' constructor (it is
invoked explicitly by RealTimeClockRuntimeDxe), this case is guaranteed to
be safe after all.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Commit 03b6bed17e ArmVirtPkg/XenRelocatablePlatformLib: rewrite DTB
memory node retrieval in C") introduced a FindMemNode () C function
that takes pointers to system memory base and size as arguments, but the
calling code passes them in the wrong order.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Now that the PCI host bridge driver parses the DT node that describes
the PCI host bridge directly via the FDT client protocol, we can drop the
handling from VirtFdtDxe completely.
This means some PCI related PCDs are no longer set, such as PcdPciBusMin,
PcdPciBusMax, PcdPciIoBase, PcdPciIoSize, PcdPciIoTranslation,
PcdPciMmio32Base and PcdPciMmio32Size. Since these PCDs are specific to
ARM (and declared in ArmPlatformPkg), and not used anywhere else by the
ArmVirtPkg platforms, we can simply stop populating them, and drop all
references to them.
It also means that we can no longer rely on PcdPciDisableBusEnumeration
to be set before it is consumed by PciBusDxe and QemuFwCfgAcpiPlatformDxe,
so make those depend on FdtPciPcdProducerLib explicitly via NULL library
class resolution.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Instead of relying on VirtFdtDxe to populate various dynamic PCDs with
information retrieved from the host-provided device tree, perform the
PCI ECAM related DT node parsing directly in PciHostBridgeDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Make BaseCachingPciExpressLib depend on PciPcdProducerLib, so that we
have a chance to populate PcdPciExpressBaseAddress based on the contents
of the device tree.
Also update the platforms under ArmVirtPkg that support PCI to use the
special MAX_UINT64 value as the build time default for
PcdPciExpressBaseAddress.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This implements a library FdtPciPcdProducerLib which is intended to
be incorporated into modules that consume the PCI related dynamic PCDs
PcdPciExpressBaseAddress and PcdPciDisableBusEnumeration, either via NULL
library class resolution or via a direct dependency (for other libraries
or modules in ArmVirtPkg). This allows us to make them depend on the FDT
client protocol, and populate these PCDs based on the presence and the
contents of a 'pci-host-ecam-generic' DT node.
This also overloads the meaning of PcdPciExpressBaseAddress, which we will
set to MAX_UINT64 to signify that the actual values of these two PCDs have
not been assigned yet.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Remove the handling of the fw_cfg DT node from VirtFdtDxe now that the
fw_cfg client library has been moved to the FDT client protocol, and no
longer relies on VirtFdtDxe to pass this information via dynamic PCDs.
Since the PCDs in question are now no longer used, remove them from the
various DEC and DSC files as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Make this library depend on the FDT client protocol to access the
host supplied device tree directly rather than depending on VirtFdtDxe
to set them using dynamic PCDs.
Since this library is used by several drivers (BdsDxe, SmbiosPlatformDxe,
SmbiosDxe and QemuFwCfgAcpiPlatformDxe), we will end up parsing the device
tree and the fwcfg node at least four times. However, no dynamic PCDs are
involved anymore, and will even be removed completely in a subsequent
patch. So the conversion is not optimal, but guaranteed to be safe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The timer code no longer relies on VirtFdtDxe to set the PCDs, so remove
the handling of the timer node and the references to those PCDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Move to the new dedicated ArmVirtTimerFdtClientLib to populate the
various timer related PCDs at driver load time rather than relying on
VirtFdtDxe to do it. Since ArmPkg/TimerDxe is the only consumer of these
PCDs, which is the DXE driver ArmVirtTimerFdtClientLib is intended to
complement, this conversion is guaranteed to be safe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This implements a library ArmVirtTimerFdtClientLib which is intended to
be incorporated into TimerDxe via NULL library class resolution. This
allows us to make TimerDxe depend on the FDT client protocol, and
discover the timer interrupts from the device tree directly rather than
relying on VirtFdtDxe to set the dynamic PCDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The detection of the PSCI method has been moved to the EfiResetSystemLib
implementation, so drop the handling from VirtFdtDxe. Since no users
remain of gArmVirtTokenSpaceGuid.PcdArmPsciMethod, remove that as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Instead of relying on VirtFdtDxe to detect the PSCI method, move our
EfiResetSystemLib to the FDT client protocol to interrogate the device
tree directly.
Since this library is only consumed by EmbeddedPkg/ResetRuntimeDxe, and
considering that the PCD is no longer set, and even removed completely in a
subsequent patch, this conversion is guaranteed to be safe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that we moved the GIC discovery to our ArmGicArchLib implementation,
we can remove it from VirtFdtDxe, since it is no longer used. Remove the
PcdArmGicRevision declaration and definitions as well: VirtFdtDxe no longer
sets it, and no other drivers consume its value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Instead of relying on VirtFdtDxe to populate the GIC related PCDs, move
this handling to our implementation of ArmGicArchLib, and retrieve the
required DT info using the new FDT client protocol.
This removes one of the reasons we need to load VirtFdtDxe first using
an 'A PRIORI' declaration in the platform FDF.
As Laszlo kindly confirms:
So, ultimately, the only user of this library instance is
"ArmPkg/Drivers/ArmGic/ArmGicDxe.inf". ... Indeed, checking the build
report file for ArmVirtQemu (AARCH64), I find ArmVirtGicArchLib (and
ArmGicLib too) only under "ArmPkg/Drivers/ArmGic/ArmGicDxe.inf".
which means that the constructor is only invoked once, and so the dynamic
PCDs are set in time for ArmGicDxe to consume them, and never afterwards.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add FdtClientDxe to the various platforms under ArmVirtPkg, so that the
drivers we will update to depend on the FDT client protocol in subsequent
patches will remain in working order.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This implements a new DXE driver FdtClientDxe to produce the FDT client
protocol based on a device tree image supplied by the virt host.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This introduces the FdtClientProtocol, which will be used to expose the
device tree provided by the host to other DXE drivers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that FatPkg is open source (and therefore can be included in the
EDK II tree) we build and use it directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The PcdPeim dynamic PCD driver is dispatched explicitly via an 'A PRIORI'
declaration in the platform DSC. Without that declaration, the PEI module
can never be dispatched since it transitively (via PeiPcdLib) depends on
a PPI it produces itself. So use the NULL PcdLib explicitly only for
this driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The PcdDxe dynamic PCD driver is dispatched explicitly via an 'A PRIORI'
declaration in the platform DSC. Without that declaration, the DXE driver
can never be dispatched since it transitively (via DxePcdLib) depends on
protocols it produces itself. So use the NULL PcdLib explicitly only for
this driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Nothing we use on any of the ArmVirtPkg platforms depends on the
ArmPlatformSecExtraActionLib library class, so drop the resolution
from ArmVirt.dsc.inc
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The built in Linux loader was a temporary solution to boot ARM Linux
without EFI support in the OS. Now that EFI support is merged in the
upstream v4.5 release, we no longer need it. So drop it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Edk2 commit 8a45f80eda ("MdeModulePkg: Make HII configuration settings
available to OS runtime") implements the optional UEFI feature described
in "31.2.11.1 OS Runtime Utilization" in UEFI v2.6.
While this feature might show benefits down the road even in QEMU virtual
machines, at the moment it only presents drawbacks:
- it increases the EfiRuntimeServicesData footprint,
- it triggers HII compatibility problems between edk2 and external drivers
unconditionally, even if the end-user is not interested in HII and/or in
configuring said drivers (see
<https://www.redhat.com/archives/vfio-users/2016-March/msg00153.html>
and <http://thread.gmane.org/gmane.comp.bios.edk2.devel/9894> for an
example).
While the feature was being introduced, popular demand for a controlling
Feature PCD rose (see
<http://thread.gmane.org/gmane.comp.bios.edk2.devel/7626>), which is why
we can set it now to FALSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This introduces the .DSC define 'PURE_ACPI_BOOT_ENABLE', defaulting to
FALSE, which controls the value of the feature PCD 'PcdPureAcpiBoot'.
This allows an ArmVirtQemu image to be built that restricts the OS to
booting in ACPI mode.
This feature is only added to ArmVirtQemu, and not to ArmVirtQemuKernel,
the reason being that the latter is mostly intended for development work,
where the burden of adding 'acpi=force' if you need it is much more
tolerable than when trying to boot an installer on a production KVM guest
instance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The arm64 kernel is hardwired to prefer DT over ACPI, unless 'acpi=force'
is passed on the kernel command line. The only other way to force the
kernel to use ACPI is not to pass an FDT to it in the first place. So
introduce a PCD that inhibits the installation of the QEMU supplied FDT
as a configuration table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The explanation is in the patch titled
OvmfPkg: introduce gRootBridgesConnectedEventGroupGuid
At this point, this signal doesn't do anything yet.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Change our resolution for the previously unused CpuExceptionHandlerLib
from the null implementation to the newly added implementation specific
to AARCH64 and ARM. This is needed since our CpuDxe will start using it
in a subsequent patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Unlike Linux on x86, which typically honors the PCI configuration performed
by the firmware, Linux on ARM assumes that the PCI subsystem needs to be
configured from scratch. This is not entirely unreasonable given the
historical background of embedded systems using very basic bootloaders,
but is no longer tenable with Linux on arm64 moving to UEFI and ACPI in the
server space. For this reason, PCI support in the arm64 kernel running under
ACPI is likely to move to the x86 model of honoring the PCI configuration
done by the firmware.
So let's align with that in our DT based configuration as well, and set the
/chosen/linux,pci-probe-only property to 1 in the Device Tree before we
hand it to the OS.
In case we are exposing an emulated VGA PCI device to the guest, which may
subsequently get exposed via the Graphics Output protocol and driven as an
efifb by the OS, this ensures the PCI resource allocations for the framebuffer
are not overridden, since that would cause the framebuffer to stop working.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Because SecureBootConfigDxe use FileExplorerLib now, but
FileExplorerLib is not in the dsc files of the package
that use SecureBootConfigDxe. Now add it to pass build.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This adds the new Virtio-RNG DXE module to the default build of
ArmVirtQemu. Note that QEMU needs to be invoked with the 'device
virtio-rng-pci' option in order for this device to be exposed to
the guest.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The ACPI spec predates the AARCH64 architecture by 5 versions, so there
is no point in supporting anything below v5.0. So set the PCD that
controls the ACPI table generation to the appropriate value.
Note that the current consumers of this PCD only check whether bit 1
is set or not (i.e., ACPI v1.0b), but this may change in the future,
so let's choose a meaningful value right away.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
No ARM support for ACPI is planned under any OS we intend to run under
ArmVirtQemu-ARM, so remove the drivers from the ARM build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The legacy 32-bit SMBIOS entry point has little use on AARCH64 systems,
since many such systems have no 32-bit addressable physical RAM, and so
OSes that implement SMBIOS will have to be able to deal with the 64-bit
entry point anyway.
Given that the OS will map main memory in 1 GB chunks if it can, and that
punching a page sized hole (e.g., for SMBIOS data) into it will result in
the whole 1 GB chunk being mapped using 2 MB and 4 KB blocks instead, it
is important to group memory reservations from the OS as much as we can,
and allocating below 4 GB for no good reason interferes with that.
This is especially important under virtualization, considering that each
*level* of lookup at stage 1 (the guest virtual page table) will result in
a full page table walk at stage 2 (the guest PA to host PA mapping).
So expose only the 64-bit entry point when the SMBIOS tables adhere to
version 3.0 or later.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This implements a version of ArmVirtQemu that does not execute in place from
emulated NOR flash, but implements the Linux kernel boot protocol, and executes
from DRAM instead. This allows UEFI to be loaded as a payload by a previous
bootloader stage such as ARM Trusted Firmware/OP-TEE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
This introduces ArmQemuRelocatablePlatformLib, which started out as a
straight copy of ArmXenRelocatablePlatformLib, but has been modified so
that ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf can be used with
QEMU as well as with Xen. It retains the self relocation and FDT parsing
for the system memory, but uses the QEMU MMU layout.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Allow the use of a patchable PCD for the initial DT base address recorded in
gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress, so that the module
can be reused by a relocatable version of ArmVirtQemu.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This adds ARM support to the ArmVirtXen platform. As is the case for
AARCH64, the ARM port adheres to the ARM Linux boot protocol, i.e.,
it expects the address of a DTB describing the platform to be passed
in r2, and relocates itself at runtime to the actual load time memory
offset.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19333 6f19259b-4bc3-4df7-8a09-765794883524
This is a port of the AARCH64 low level init routines to ARM. This
mainly covers the platform boot code that extracts the system base
and size from the DTB, copies it and updates the FD and FV base
addresses according to the load time offset.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19332 6f19259b-4bc3-4df7-8a09-765794883524
This adds support to the self relocating PrePi instance that is built
as a PIE ET_DYN executable. It primarily involves porting the relocation
routine to use ELF32 REL entries instead of ELF64 RELA entries which is
what AArch64 uses.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19331 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Jordan Justen
Laszlo Ersek
Dandan Bi