Currently the EFI_FILE_EXPLORE_FORMSET_GUID value in BdsDxe in
IntelFrameworkModulePkg is same with the GUID VALUE in FileExplorerLib.
This patch is to modify the EFI_FILE_EXPLORE_FORMSET_GUID in
FileExplorerLib to avoid potential issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
when free up resource allocated for a MenuEntry, there exists
the case that the DevicePath and DisplayString are NULL,
so before calling FreePool function, need to check.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If the BOM is stripped from StdIn, then an app that duplicates StdIn
will not be able to duplicate, say, a UCS2 file that was piped into
it (the output file it creates would not start with a BOM).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <Jaben.Carsey@intel.com>
TC2 reads 0x02 for the PL180 ID3 register instead of 0x00 as defined in
the spec.
However, the spec [1] states that the contents of ID3 register represent
the "configuration option of the peripheral" and thus not part of the
Prime Cell identification.
For this patch, we drop checking the value in MCI_PERIPH_ID_REG3.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0172a/index.html
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
If the PL180 fails to probe, issue a warning on debug builds.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
PL180 on TC2 has a dependency on gEfiCpuArchProtocolGuid. Without
adding the dependency, TC2 will crash in the PL180 driver.
This problem has been present since d340ef7 when TC2 stopped booting.
However, it was masked by 300fc77 which prevented PL180 from running on
TC2 due to TC2 using a version on PL180 newer than that documented
publicly.
[1] https://github.com/tianocore/edk2/commit/d340ef7
2014-08-26
ArmPkg/ArmArchTimerLib: Remove non required [depex] and IoLib
[2] https://github.com/tianocore/edk2/commit/300fc77
2015-08-25
ArmPlatformPkg/PL180MciDxe: check PrimeCell ID before initializing
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In the recent migration of the ARM Ltd. platforms to
https://git.linaro.org/uefi/OpenPlatformPkg.git, this file unfortunately
got left behind. Delete it to reduce confusion and (further) risk of
duplication of effort.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
When the DXE core is loaded, it invokes the PeCoffExtraActionLib library
function 'PeCoffLoaderRelocateImageExtraAction' explicitly, which may be
in addition to the same function having been called by the DxeIpl PE/COFF
loader instance.
The ImageContext that DXE core presents to this function is only partially
initialized, which may result in the following output on AArch64 systems:
add-symbol-file ..MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x5F226240
<some intermediate output>
add-symbol-file ..MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x5F226000
This is caused by incorrect data in the ImageContext structure, which means
the start of the .text section is calculated incorrectly. In general, it is
the duty of the caller to present a valid ImageContext structure, so let's
add the missing values before invoking PeCoffLoaderRelocateImageExtraAction().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The definition of DEBUG_LOADFILE was incorrectly described as "UNDI
Driver". Correct this to align with MdePkg.dec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
This patch is to add a new interface to get the "Path" component according to
the URI parse result, it would be helpful for the library user to extract the
file path value in a URI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Since there's percentage calcution, multiply on 32bit variable
will cause overflow. So fix the variables as 64bit.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The StringSize variable in the FindStringBlock function is a IN OUT
parameter of the GetUnicodeStringTextOrSize function.
Thought the GetUnicodeStringTextOrSize function changes the value of
the StringSize variable, it is better to initialize the StringSize
variable before passing it to the GetUnicodeStringTextOrSize function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
when make BaseTools by VS2013, LzmaEnc.c report warning C4127:
conditional expression is constant, so this patch fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When PcdShadowPeimOnBoot is FALSE, they are not copied to memory and
execute from their original locations. Here, this policy should only
apply for PEIM and PEI_CORE, not for other file type, such as DXE_CORE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Eugene Cohen <eugene@hp.com>
The RamDiskDxe driver will:
1. Produce the EFI RAM Disk Protocol
2. Install RAM disk device path and block I/O related protocols on the
RAM disk device handle.
3. Install RAM disk configuration form to HII database
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Some platform doesn't use CPU(HOST)/Device 1:1 mapping for PCI Bus.
But PCI IO doesn't have interface to tell caller (device driver)
whether the address returned by GetBarAttributes() is HOST address
or device address.
UEFI Spec 2.6 addresses this issue by clarifying the address returned
is HOST address and caller can use AddrTranslationOffset to calculate
the device address.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
For new PCDs add their usage information strings in UNI file.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
v3:
*
When there exists duplicate items in VLAN variable , save the correct
variable content back to the variable storage after duplicate items are removed
Duplicate items in VLAN variable will cause MNP driver binding
start function fall into infinite loop,so we should check it's
content before using it.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
define PRINT_BIT_FIELD(Variable, FieldName) \
Print (L"%5a%42a: %x\n", #Variable, #FieldName, \
##Variable.Bits.##FieldName);
The above definition in UefiCpuPkg/Application/Cpuid/Cpuid.c
will cause GCC build error.
Fix it with:
define PRINT_BIT_FIELD(Variable, FieldName) \
Print (L"%5a%42a: %x\n", #Variable, #FieldName, \
Variable.Bits.FieldName);
The '.' has its origin meaning as a member operator in the define
statement. Thus, the token-pasting operator '##' is not necessary here.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
USB mouse cursor cannot move unless the left button is down. The patch
refresh the FileBuffer of Editor every time when the 'MainEditorRefresh'
is called to fix this bug.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Dereferencing pMemTableSize in debug statement displays bad values when
it is set to NULL. Display the actual table size value instead.
TEST=Build and run on Galileo Gen2
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Verify the register address in the FADT.
TEST=Build and run on Galileo Gen2 when the FADT was not present.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
The ISO C standard says about free(),
If ptr is a null pointer, no action occurs.
This is not true of the FreePool() interface of the MemoryAllocationLib
class:
Buffer must have been allocated on a previous call to the pool
allocation services of the Memory Allocation Library. [...] If Buffer
was not allocated with a pool allocation function in the Memory
Allocation Library, then ASSERT().
Therefore we must not forward the argument of free() to FreePool() without
checking.
Cc: Cecil Sheng <cecil.sheng@hpe.com>
Cc: Cinnamon Shia <cinnamon.shia@hpe.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Cc: Yao Jiewen <Jiewen.Yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-By: Cinnamon Shia <cinnamon.shia@hpe.com>
The PL061 GPIO controller is a bit of an anachronism, and the existing
driver does nothing to hide this - leading to it being very tricky to
read.
Rewrite it to document (in comments and code) what is actually
happening, and fix some bugs in the process.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
PL061Initialize() did not actually do anything other than call
PL061Identify() - so cut out the middle man.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
For whatever reason, every single operation on the PL061 looked for an
"Initialized" flag, and manually called the initialization function if
not set. Move this to a single call on protocol installation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
The copyright statement in PL061Gpio.c would not fit on a normal terminal
screen. Break lines at <= 80 characters.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
The assignment of CurrentRsdtEntry and its subsequent dereference are
subject to the same condition, but for some reason, VS2008 does not see
that and warns about the dereference possibly involving an uninitialized
pointer. Since the single statememt between the blocks is unrelated, we
can just move it and merge the two conditional blocks together.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch removes the assumption that the resources claimed by root
bridges should not exist. Because resources might have been added:
1. by platform modules either in PEI through resource HOB, or in DXE,
before the PCI host bridge driver runs.
2. Resources claimed by different root bridges may overlap so that
resource adding operation for latter root bridges may fail if
we assume the resource should not exist.
In real world, this patch is to fit OVMF platform needs because
different root bridges in OVMF platform shares the same resources.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
[lersek@redhat.com: intersection-based implementation]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Using existing library FileExplorerLib to replace the same
logic in SecureBootConfigDxe to make the code clear. After using
FileExplorerLib, the UI behavior for enroll PK will change,
previously when select one PK file, commit/discard changes will
return to Device Manager,press ESC will return to FileExplorer.
Now using FileExplorerLib the behavior will keep same with
enroll KEK/DB/..., commit/discard changes will return to Custom
Secure Boot Options form and ESC will return to PK options form.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Because SecureBootConfigDxe use FileExplorerLib now, but
FileExplorerLib is not in the dsc file of the package
that use SecureBootConfigDxe. Now add it to pass build.
Cc: David Wei <david.wei@intel.com>
Cc: Tim He <tim.he@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
Because SecureBootConfigDxe use FileExplorerLib now, but
FileExplorerLib is not in the dsc file of the package
that use SecureBootConfigDxe. Now add it to pass build.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Because SecureBootConfigDxe use FileExplorerLib now, but
FileExplorerLib is not in the dsc files of the package
that use SecureBootConfigDxe. Now add it to pass build.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If 'CoreGetMemoryMap' return success the 'MemoryMap' shouldn't be NULL.
Add code to make sure this.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Yao Jiewen <Jiewen.Yao@intel.com>
When a PCI bridge is not enabled, the secondary bus may still be zero.
This causes an infinite recursive call to enumerate bus 0 which results
in a stack overflow. The easy fix is to skip the recursive bus
enumeration for bridges which do not have the secondary bus initialized.
TEST=Build and run CorebootPayloadPkg on Quark/Galileo Gen2
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The ISO C standard says about realloc(),
If ptr is a null pointer, the realloc function behaves like the malloc
function for the specified size.
The realloc() implementation doesn't conform to this currently, so add a
check and call malloc() if appropriate.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Qin Long <qin.long@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Dandan Bi
Laszlo Ersek
Jim_Dailey@Dell.com
Ryan Harkin
Leif Lindholm
Ard Biesheuvel
Tian, Feng
Fu Siyuan
Haojian Zhuang
Cinnamon Shia
Yonghong Zhu
Liming Gao
Hao Wu
Ruiyu Ni
Qiu Shumin
Zhang, Chao B
Zhang Lubo
Leahy, Leroy P