Current CorebootPayloadPkg uses PciBusNoEnumerationDxe and
PciRootBridgenoEnumerationDxe copied from the DuetPkg. Now it will
switch to use the standard PciBusDxe and PciHostBridgeDxe from
MdeModulePkg. As a result, a coreboot specific PciHostBridgeLib
is added to collect pre-allocated PCI resources.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Switch over to use BdxDxe generic driver in MdeModulePkg.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Use generic SerialDxe driver in MdeModulePkg instead of the one
in CorebootModulePkg. By doing this the reference for
PciSioSerialDxe driver will also be removed from DSC and FDF file.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Add the USB OHCI driver from revision 24ca2f35 of QuarkSocPkg.
Change-Id: Ie7aa0bc47d4ff06adc57976a5efb0e40ce4e1673
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Add SD and eMMC DXE driver support to CorebootPayloadPkg.
Change-Id: Ibfd3a2cc32a653ce51e38d9157ea3c6da25a5474
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Set the proper Shell file GUID so that the BDS transfers control to the
Shell.
Change-Id: I816636a340bbe2f76ac1973b9cb685084c4f88a0
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Use the BaseSerialPortLib16550 which sets RTS and DTR during
initialization. This fixes the mis-matched flow control issue when
the flow control signals are connected between the host and target
and the host has flow control enabled.
Change-Id: I3505e129b2de3c5c17fff23c62553f15cd892dca
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Set the vendor to 0xffff which indicates the end of the list.
Change-Id: If6475e04d3675f0a932571a85d1dd3f301416b6a
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
eviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Convert to using DOS line endings.
Change-Id: Ie2f148867d9b2b386d556583afb6716ec21399e9
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Use the serial drivers which update the serial PCDs from
PlatformHookLib.
Change-Id: Ie6a3526d56332ee1cf07edb24ff39634a981183f
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Add a define and use it with MaxLogicalProcessorNumber to enable this
PCD to be changed via the command line. Quark needs to set this value
to one during the builds.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Allow the serial port configuration to be overriden from the command
line.
Make the debug serial PCDs patchable in module.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Add all of the shell options from ShellBinPkg including building the
shell from source.
Enable link time optimization for GCC debug builds to keep the size
under 0x3e0000.
Test: Use -DSHELL_TYPE=BUILD_SHELL command line options to build the
shell from source. Run the result on Galileo Gen2.
Change-Id: I1e12adb57960ac5e75e682073540a9322aa03081
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Remove the references to DuetPkg. Copy the files from revision
ffea0a2ce2 of DuetPkg into
CorebootModulePkg. The components include:
* PciBusNoEnumerationDxe
* PciRootBridgeNoEnumerationDxe
* SataControllerDxe
TEST=Build and run on Galileo Gen2
Change-Id: Id07185f7e226749e5f7c6b6cb427bcef7eac8496
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Remove trailing white space from existing .dsc and .fdf files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Now that FatPkg is open source (and therefore can be included in the
EDK II tree) we build and use it directly.
Note: Build tested with GCC 5.3 on IA32 and IA32+X64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
1. Update fdf and dsc to use SerialDxe in MdeModulePkg.
2. Separate the code that gets SerialRegBase and SerialRegAccessType
by CbParseLib from CorebootPayloadPkg/Library/SerialPortLib to
PlatformHookLib, and then leverage BaseSerialPortLib16550 in
MdeModulePkg.
3. Remove CorebootPayloadPkg/SerialDxe and
CorebootPayloadPkg/Library/SerialPortLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18968 6f19259b-4bc3-4df7-8a09-765794883524
Current CorebootPayloadPkg uses PciHostBridge and PciBusNoEnumeration
driver. It will cause the PCI bus resource incorrectly set in root
bridge instance. As a result all PCI devices behind a PCI bridge will
not show up in Shell 'PCI' command.
To resolve it use PciRootBridgeNoEnumeration driver instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17408 6f19259b-4bc3-4df7-8a09-765794883524
Maurice Ma
Leahy, Leroy P
Justen, Jordan L
Star Zeng
Jordan Justen