When PageTableMap() is called to create non 1:1 mapping
such as [0, 1G) to [8K, 1G+8K), it should split the page entry to the
4K page level, but old logic has a bug that it just uses 1G page
entry.
The patch fixes the bug.
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The patch replaces
LinearAddress + Offset == RegionStart
with
((LinearAddress + Offset) & RegionMask) == 0
The replace should not cause any behavior change.
Because:
1. In first loop of while when LinearAddress + Offset == RegionStart,
because the lower "BitStart" bits of RegionStart are all-zero,
all lower "BitStart" bits of (LinearAddress + Offset) are all-zero.
Because all lower "BitStart" bits of RegionMask is all-one and
bits are all-zero, ((LinearAddress + Offset) & RegionMask) == 0.
2. In following loops of the while, even RegionStart is increased
by RegionLength, the lower "BitStart" bits are still all-zero.
So the two expressions still semantically equal to each other.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When LinearAddress or Length is not aligned on 4KB, PageTableMap()
should return Invalid Parameter.
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The lib includes two APIs:
* PageTableMap
It creates/updates mapping from LA to PA.
The implementation only supports paging structures used in 64bit
mode now. PAE paging structure support will be added in future.
* PageTableParse
It parses the page table and returns the mapping relations in an
array of IA32_MAP_ENTRY.
It passed some stress tests. These test code will be upstreamed in
other patches following edk2 Unit Test framework.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
CPU_EXCEPTION_INIT_DATA is now an internal implementation of
CpuExceptionHandlerLib. Union can be removed since Ia32 and X64 have the
same definition. Also, two fields (Revision and InitDefaultHandlers)are
useless, can be removed.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Since the API InitializeSeparateExceptionStacks is simplified and does't
use the struct CPU_EXCEPTION_INIT_DATA, CPU_EXCEPTION_INIT_DATA become
a inner implementation of CpuExcetionHandlerLib.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Hide the Exception implementation details in CpuExcetionHandlerLib and
caller only need to provide buffer
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Specify how to build the PrmPkg for the AArch64 architecture.
Make the 2 following notes:
- the PrmPkg has only been tested on AArch64 using the GCC5
toolchain.
- All symbols to be listed in the PRMT as well as the
PrmModuleExportDescriptor must be explicitly preserved by resorting to
the --require-defined linker flag.
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add support to build PrmPkg for AArch64 using the GCC compiler.
Add AARCH64 architecture to the list of supported architectures.
Add BaseStackCheck library to allow for Prm module builds on AARCH64.
Also update the CI to add dependency on ArmPkg.
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
- Add the --prm flag to the GENFW_FLAGS
- Add the --no-gc-section to the linker flags so that apparently
unreferenced symbols are not prematurely removed from the .dll which
is used to generate the Prm module .efi.
- Force the linker to maintain the PrmModuleExportDescriptor symbol.
- Force the linker to maintain the PRM handler funtion's symbol.
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Enable GCC compilations to keep external symbols when generating a PRM
module.
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The GenFw invocation with the --prm flag was previously reserved for
X64.
AArch64 platforms, built with GCC5, can also deploy PRM modules, hence
the --prm flag is also applicable in builds targeting the AARCH64
architecture.
This commit enables the --prm flag to be used for EDK2 builds targeting
AARCH64.
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Print 'SubtypeGuid' field from the EFI_FREEFORM_SUBTYPE_GUID_SECTION
structure.
This value describes the raw data inside the section.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
Currently there is no labels for start and end of the
EFI_SECTION_FIRMWARE_VOLUME_IMAGE type section. Therefore it is not
possible to see where the FV section ends and another section starts.
Add labels for start and end of the FV sections to fix the issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Fix using RmrNodeCount uninitliased by initliasing it to zero. Also, add
an additional check for ACPI version. This fixes a crash running on
kvmtool.
Signed-off-by: Edward Pickup <edward.pickup@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3907
This change modifies AhciPei library to allow usage both EDKII_PCI_DEVICE_PPI
and EDKII_PEI_ATA_AHCI_HOST_CONTROLLER_PPI to manage ATA HDD working under
AHCI mode.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Maciej Czajkowski <maciej.czajkowski@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3907
This commit introduces EDKII_PCI_DEVICE_PPI. The purpose of this PPI is
to provide a way of accessing PCI devices to drvice drivers such as
NvmExpressPei or AhciPei.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Maciej Czajkowski <maciej.czajkowski@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
If the boot logo is enabled, this will allow edk2 to pass the logo
to the OS via ACPI.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Add a macro called BOOTSPLASH_IMAGE, which when enabled, will
display a logo at boot time.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Ensure that the PixelInformation field of the
EFI_GRAPHICS_OUTPUT_MODE_INFORMATION structure is zeroed out in
EFI_GRAPHICS_OUTPUT_PROTOCOL.QueryMode() and
EFI_GRAPHICS_OUTPUT_PROTOCOL.SetMode() when PixelFormat is
PixelBlueGreenRedReserved8BitPerColor.
According to UEFI 2.9 Section 12.9, PixelInformation field of the
EFI_GRAPHICS_OUTPUT_MODE_INFORMATION structure is valid only if
PixelFormat is PixelBitMask. This means that firmware is not required
to fill out the PixelInformation field for other PixelFormat types,
which implies that the QemuVideoDxe implementation is technically
correct.
However, not zeroing out those fields will leak the contents of the
memory returned by the memory allocator, so it is better to explicitly
set them to zero.
In addition, the SCT test suite relies on PixelInformation always
having a consistent value, which causes failures.
Signed-off-by: Dimitrije Pavlov <Dimitrije.Pavlov@arm.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3980
As per TCG PC Client Device Driver Design Principle document,
if tpm commands fails due to timeout condition, then it should
have retry mechanism (3 retry attempts).
Existing implementation of PtpCrbTpmCommand does not have retry
mechanism if it fails with EFI_TIMEOUT.
See TCG PC Client Device Driver Design Principles for TPM 2.0
https://trustedcomputinggroup.org/wp-content/uploads/TCG_PCClient_Device_Driver_Design_Principles_TPM2p0_v1p1_r4_211104_final.pdf
Vision 1.1, Revision 0.04
Section 7.2.1
Signed-off-by: Qi Zhang <qi1.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Swapnil Patil <S.Keshavrao.Patil@dell.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT generator to:
- increment IORT table revision count to 5.
- populate Identifier filed if revision is greater than 4.
- add support to populate Reserved Memory Range nodes and
the Memory range descriptors.
- add validation to check that the Identifier field is
unique.
- Populate the PASID capabilities and Flags field of the
Root complex node.
- Added checks to not generate IORT Rev E, Rev E.<a,b,c>.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the Arm namespace objects to:
- add Identifier field to IORT nodes.
- introduce enums to represent RMR nodes and Memory Range
descriptors.
- add definition of node type 6 - Reserved Memory Range node.
- add definition for Memory Range Descriptors.
- add PASID capabilities and flags field to Root Complex node.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT parser to:
- parse the Identifier field.
- parse Reserved Memory Range node.
- parse Memory Range Descriptors.
- add validations to check that the physical range base
and size of the Memory Range Descriptor is 64KB aligned.
- add validation to check that the IORT Table Revision is
not 4 as IORT Rev E.c is deprecated.
- add validation to check that the IORT RMR node revision
is not 2 as it breaks backward compatibility and was
deprecated as part of IORT Rev E.c.
- skip parsing of IORT Rev E, Rev E.a, Rev E.b, Rev E.c as
some fields were deprecated in these revisions.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT header file to reflect these changes,
and also rename the EFI_ACPI_IO_REMAPPING_TABLE_REVISION macro to
EFI_ACPI_IO_REMAPPING_TABLE_REVISION_00.
Also update the IORT generator in DynamicTablesPkg to fix the
compilation errors so that Git Bisect can work.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The IORT generator is populating the reference field for Context and
PMU interrupts even if their count is zero.
Update the IORT generator to set the references only if the interrupt
count is not 0. Also add checks to ensure a valid reference token has
been provided.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
The IORT table generator is setting up a reference to ID array for
nodes even when the ID Mapping count is zero. This is not an issue as an
OS would only access the ID Reference if the ID mapping count is not zero.
However, it would be good to set the reference to ID array to zero when
the ID Mapping count is zero rather than populating it with an incorrect
value.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Add error handling when the IdMappingCount is not zero and the
IdMappingToken is NULL.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Some field names in the IORT table parser were longer than the
OUTPUT_FIELD_COLUMN_WIDTH plus indentation, resulting in loss of
the output print alignment. Therefore, abbreviate the field names.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3993
Fixed a logic bug in GenCfgOpt.py to skip FSPI_UPD when platforms
do not support.
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3993
FSPI_UPD is required only When platforms implemented FSP_I component.
Updated the scripts to allow FSPI_UPD not present scenario.
Also fixed FSP_GLOBAL_DATA structure alignment issue and unnecessary
non-backward compatibility change in previous FSP_I patch.
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Fix path to follow naming convention of "AArch64", and allow the path
in "Maintainers.txt" to work as expected.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3982
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
The email addresses for the reviewers of the MptScsi and
PvScsi in the OvmfPkg are no longer valid. Remove the
reviewers for the MptScsi and PvScsi drivers until new
maintainers/reviewers can be identified.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
The email addresses for the reviewers of the MptScsi and
PvScsi are no longer valid. Disable the MptScsi and PvScsi
drivers in all DSC files until new maintainers/reviewers can
be identified.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Writes TianoCore debug logs into the CBMEM console ringbuffer, from
where the user can retrieve them with the `cbmem` userspace utility.
The intention is to aid in debugging non-fatal issues even in release
builds, or simply make TianoCore's logs available to those interested.
Consequently, MDEPKG_NDEBUG must be masked. As an in-memory debug
logging library, ASSERTs must be non-fatal to be seen, so they neither
dead-loop nor create a breakpoint. It is assumed that ASSERT() neither
enforces fatal conditions nor security integrity, as release builds do
not call DebugAssert() from the ASSERT macro.
More detailed debug logs are produced with the DEBUG_CODE macro, but
this guards other debug-related code throughout the codebase. To avoid
changing behaviour on release builds, this is only set for debug builds.
Tested on QEMU, dumping the appropriate memory region in the UEFI shell
shows the TianoCore log. An improved revision of the debug library used
in several coreboot-related EDK2 forks, including MrChromebox's.
Previous revisions also tested on an Acer Aspire VN7-572G laptop.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3984
Under function RolocateElfDynamic() in Elf32Lib.c
if (RelaAddress == MAX_UINT64) is always FALSE while RelaAddress is UINT32
Fix is to modify if condition check to "if (RelaAddress == MAX_UINT32)"
Cc: Ray Ni <ray.ni@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: James Lu <james.lu@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Currently there is no labels for start and end of the encapsulation
sections. Therefore it is not possible to see where the encapsulation
section ends and another section starts.
Add labels for start and end of encapsulation sections to fix the
issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3928
Windows-based system using signtool.exe to sign the capsule.
Add the support to using "--subject-name" argument to assign
the subject name used to sign the capsule file.
This argument would pass to signtool.exe as a part of input
argument with "/n" flag.
NOTE: If using signtool.exe to sign capsule at least need to
choose one of "--pfx-file" and "--subject-name"
argument to input the value.
Signed-off-by: Jason1 Lin <jason1.lin@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Dakota Chiang <dakota.chiang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Harry Han <harry.han@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gary Lin <gary.lin@hpe.com>
Cc: Julien Grall <julien@xen.org>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Debkumar De <debkumar.de@intel.com>
Acked-by: Gary Lin <gary.lin@hpe.com>
Reviewed-by: Andrew Fish <afish@apple.com>
XenTimerDxe has been removed from the OvmfPkg. Remove
file pattern for XenTimerDxe reviews from Maintainers.txt.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Andrew Fish <afish@apple.com>
REF : https://bugzilla.tianocore.org/show_bug.cgi?id=4006
Add CRYPTO_PROTOCOL_SUPPORT to decide CryptoDxe built into UPL.efi
If CRYPTO_PROTOCOL_SUPPORT is true, BIOS will use crypto protocol
instead of building OpensslLib into drivers.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: PaytonX Hsieh <paytonx.hsieh@intel.com>
Currently, "push byte %[Vector]" causes nasm warning when Vector is larger
than 0x7F. This is because push accepts a signed value, and byte means
signed int8. Maximum signed int8 is 0x7F.
When Vector is larger the 0x7F, for example, when Vector is 255, byte 255
turns to -1, and causes the warning "signed byte value exceeds".
To avoid such warning, use dword instead of byte, this will increase 3 bytes
for each IdtVector.
For IA32, the size of IdtVector will increase from 10 bytes to 13 bytes.
For X64, the size of IdtVector will increase from 15 bytes to 18 bytes.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
- Correct typo in print statement,
- "BuildNumber" field is UINT16, therefore it needs "0x%04X" format
modifier,
- "VersionString" field is CHAR16, therefore the input data should be
processed to be displayed with "%s" printf modifier.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Ray Ni
Liu, Zhiguang
Jose Marinho
Konstantin Aladyshev
Edward Pickup
Czajkowski, Maciej
Sean Rhodes
Michael D Kinney
Dimitrije Pavlov
Qi Zhang
Sami Mujawar
Chasel Chiu
Anthony PERARD
Benjamin Doron
James Lu
Jason1 Lin
PaytonX Hsieh