Support pre memory page allocation.
Support FreePages.
Allocation made prior to permanent memory will be
migrated to permanent memory and the HOB updated.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <Ruiyu.Ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Follow PI 1.6 spec to add FreePages definition and comments for
AllocatePages that will support pre permanent memory page allocation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI 1.6 has supported pre permanent memory page allocation,
to make sure the allocated memory is physical memory for DMA,
the patch is to check memory discovered PPI installed or not first
before calling AllocatePages.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
V3 changes:
Add detailed description for the usage of the Pcd in package DEC file.
Update the comment for the introduced Pcd in module INF files.
V2 changes:
Instead of using a global variable, use a Pcd for transfer protocol
revision.
Previously, the revision of the debug agent transfer protocol is
reflected by a macro.
This commit introduces a Pcd to reflect the revision in order to avoid the
comparison of two macros, which will generate a constant result detected
by code checkers.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
VirtioGpuDxe is now IOMMU-clean; it translates system memory addresses to
bus master device addresses. Negotiate VIRTIO_F_IOMMU_PLATFORM in parallel
with VIRTIO_F_VERSION_1. (Note: the VirtIo GPU device, and this driver,
are virtio-1.0 only (a.k.a. "modern-only").)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
VirtioGpuDxe is a UEFI Bus driver (not a Device driver). This is because a
UEFI graphics driver is expected to produce its GraphicsOutput protocol
instance(s) on new child handle(s) of the video controller handle, one
child handle (plus GOP) per video output (or, one child handle plus GOP
per combination of multiple video outputs).
In VirtioGpuDxe, we support a single VirtIo GPU head (scanout), namely
head#0. This means that, with regard to a specific VirtIo GPU device, the
driver may be in one of three states, at any time:
[1] VirtioGpuDxe has not bound the device at all,
[2] VirtioGpuDxe has bound the device, but not produced the sole child
handle for head#0,
[3] VirtioGpuDxe has bound the device, and produced the sole child handle
for head#0, with a GOP instance on the child handle.
(Which state the driver is in wrt. a given VirtIo GPU device depends on
the VirtioGpuDriverBindingStart() / VirtioGpuDriverBindingStop()
invocations issued by the ConnectController() / DisconnectController()
boot services. In turn those come from BDS or e.g. the UEFI shell.)
The concept of "current video mode" is technically tied to the GOP (i.e.,
the child handle, state [3] only), not the VirtIo GPU controller handle.
This is why we manage the storage that backs the current video mode in our
EFI_GRAPHICS_OUTPUT_PROTOCOL.SetMode() member implementation.
GopSetMode() is first called *internally*, when we enter state [3] (that
is, when we produce the child handle + GOP on it):
VirtioGpuDriverBindingStart() [DriverBinding.c]
InitVgpuGop() [DriverBinding.c]
VgpuGop->Gop.SetMode() [Gop.c]
When this happens, we allocate the backing store *without* having a
preexistent backing store (due to no preexistent video mode and GOP).
Skipping VirtIo GPU details not relevant for this patch, we just note that
the backing store is exposed *permanently* to the VirtIo GPU device, with
the RESOURCE_ATTACH_BACKING command.
When external clients call the EFI_GRAPHICS_OUTPUT_PROTOCOL.Blt() member
function -- called GopBlt() in this driver --, in state [3], the function
operates on the backing store, and sends only small messages to the VirtIo
GPU device.
When external clients call GopSetMode() for switching between video modes
-- in state [3] --, then
- a new backing store is allocated and exposed to the device (attached to
a new host-side VirtIo GPU resource),
- head#0 is flipped to the new backing store,
- on success, the ReleaseGopResources() function both detaches the
previous backing store from the VirtIo GPU device, an releases it. The
new backing store address and size are saved in our GOP object. (In
other words, we "commit" to the new video mode.)
When the DisconnectController() boot service asks us to leave state [3] --
we can leave it directly only for state [2] --, then the
ReleaseGopResources() function is called on a different path:
VirtioGpuDriverBindingStop() [DriverBinding.c]
UninitVgpuGop() [DriverBinding.c]
ReleaseGopResources() [Gop.c]
In this case, the backing store being released is still in use (we're not
leaving it for a new mode -- head#0 has not been flipped "away" from it),
so in ReleaseGopResources() we disable head#0 first.
(The ReleaseGopResources() function is called the same way on the error
path in InitVgpuGop(), if the first -- internal -- VgpuGop->Gop.SetMode()
call succeeds, but the rest of InitVgpuGop() fails.)
Based on the above, for IOMMU-compatibility,
- in GopSetMode(), don't just allocate, but also map the backing store of
the nascent video mode to a device address, for bus master common buffer
operation,
- (the VirtioGpuAllocateZeroAndMapBackingStore() helper function
introduced in the last patch takes care of zeroing internally,)
- pass the device address to the VirtIo GPU device in the
RESOURCE_ATTACH_BACKING command,
- if GopSetMode() succeeds, save the mapping token,
- if GopSetMode() fails, don't just free but also unmap the still-born
backing store,
- in ReleaseGopResources(), don't just free but also unmap the backing
store -- which is the previous backing store if we're mode-switching,
and the current backing store if we're leaving state [3].
Finally, ExitBootServices() may be called when the driver is in either
state [1], [2] or [3], wrt. a given VirtIo GPU device. (Of course we are
only notified in states [2] and [3].) If we get the notification in state
[3], then the current video mode's backing store has to be unmapped, but
not released. (We must not change the UEFI memory map.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Introduce the VirtioGpuAllocateZeroAndMapBackingStore() and
VirtioGpuUnmapAndFreeBackingStore() helper functions. These functions tie
together the allocation, zeroing and mapping, and unmapping and
deallocation, respectively, of memory that the virtio GPU will permanently
reference after receiving the RESOURCE_ATTACH_BACKING command.
With these functions we can keep the next patch simpler -- the GOP
implementation in "Gop.c" retains its error handling structure, and
remains oblivious to VIRTIO_DEVICE_PROTOCOL and VirtioLib.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
The RESOURCE_ATTACH_BACKING virtio GPU command assigns guest-side backing
pages to a host-side resource that was created earlier with the
RESOURCE_CREATE_2D command.
We compose the RESOURCE_ATTACH_BACKING command in the
VirtioGpuResourceAttachBacking() function. Currently this function takes
the parameter
IN VOID *FirstBackingPage
This is only appropriate as long as we pass a (guest-phys) system memory
address to the device. In preparation for a mapped bus master device
address, change the above parameter to
IN EFI_PHYSICAL_ADDRESS BackingStoreDeviceAddress
In order to keep the current call site functional, move the (VOID*) to
(UINTN) conversion out of the function, to the call site.
The "Request.Entry.Addr" field already has type UINT64.
This patch is similar to commit 4b725858de ("OvmfPkg/VirtioLib: change
the parameter of VirtioAppendDesc() to UINT64", 2017-08-23).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Every virtio GPU command used by VirtioGpuDxe is synchronous and formatted
as a two-descriptor chain: request, response. The internal workhorse
function that all the command-specific functions call for such messaging
is VirtioGpuSendCommand().
In VirtioGpuSendCommand(), map the request from system memory to bus
master device address for BusMasterRead operation, and map the response
from system memory to bus master device address for BusMasterWrite
operation.
Pass the bus master device addresses to VirtioAppendDesc(). (See also
commit 4b725858de, "OvmfPkg/VirtioLib: change the parameter of
VirtioAppendDesc() to UINT64", 2017-08-23.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
VirtioGpuDxe uses one virtio ring, for VIRTIO_GPU_CONTROL_QUEUE.
Map it for bus master common buffer operation with VirtioRingMap(), so
that it can be accessed equally by both guest and hypervisor even if an
IOMMU is used. (VirtioRingInit() already allocates the ring suitably for
this, see commit b0338c5329, "OvmfPkg/VirtioLib: alloc VRING buffer with
AllocateSharedPages()", 2017-08-23).
Pass the resultant translation offset ("RingBaseShift"), from system
memory address to bus master device address, to VIRTIO_SET_QUEUE_ADDRESS.
Unmap the ring in all contexts where the ring becomes unused (these
contexts are mutually exclusive):
- in VirtioGpuInit(): the ring has been mapped, but we cannot complete the
virtio initialization for another reason,
- in VirtioGpuUninit(): the virtio initialization has succeeded, but
VirtioGpuDriverBindingStart() fails for another reason, or
VirtioGpuDriverBindingStop() unbinds the device after use,
- in VirtioGpuExitBoot(): ExitBootServices() is called after
VirtioGpuDriverBindingStart() has successfully bound the device.
(Unmapping the ring does not change the UEFI memory map.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Log all relevant IN parameters on entry. (There are only IN parameters.)
Beautify the format string.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Log all relevant IN and IN OUT parameters on entry.
(Note that the HostAddress parameter is IN OUT rather than OUT due to
historical reasons. The "IN EFI_ALLOCATE_TYPE Type" parameter is now to be
ignored, but historically it could be set to AllocateMaxAddress for
example, and for that HostAddress had to be IN OUT.)
When exiting with success, log all relevant OUT parameters (i.e.,
HostAddress). Also log the new (internal) StashBuffer address, on which
IoMmuMap() and IoMmuUnmap() rely on, for BusMasterCommonBuffer operations
(in-place decryption and encryption, respectively).
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
The only important external information for this function, and for the
human looking at the log, is the Mapping input parameter. Log it on entry.
Stop logging the contents of the MAP_INFO structure pointed-to by Mapping.
Thanks to the previous patch, we can now associate IoMmuUnmap() messages
with IoMmuMap() messages -- and thereby with MAP_INFO contents -- purely
via Mapping.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Log all relevant IN and IN OUT parameters on entry.
When exiting with success, log all relevant OUT and IN OUT parameters.
Don't log OUT and IN OUT parameters that are never set or changed after
entering the function (i.e., *NumberOfBytes).
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Debug messages that start as natural (English) language phrases (after the
debug prefix) should uniformly begin with lower-case or upper-case. In
SetMemoryEncDec() we have a mixture now. Stick with lower-case.
(Upper-case is better for full sentences that also end with punctuation.)
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In SetMemoryEncDec(), we have four locations where we (a) log a message on
the DEBUG_WARN level that says "ERROR", (b) return the status code
RETURN_NO_MAPPING right after.
These messages clearly describe actual errors (bad PML4, PDPE, PDE, PTE).
Promote their debug levels to DEBUG_ERROR, and remove the word "ERROR"
from the messages.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In the SetMemoryEncDec() function, the way we currently report
PhysicalAddress is not uniform:
- mostly we say "for %lx",
- in one spot we say "at %lx" (even though the 2MB page being split does
not live *at* PhysicalAddress, instead it maps PhysicalAddress),
- in another spot we don't log PhysicalAddress at all (when splitting a
1GB page).
Unify this, using the format string "for Physical=0x%Lx".
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
None of the DEBUG macro invocations in SetMemoryEncDec() fit on a single
line. Break them to multiple lines, for (a) conforming to the coding style
spec, (b) easier modification in later patches.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Now that we have a generic DmaLib implementation for non-coherent DMA,
let's get rid of the ARM specific one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
We are not recieving the response from memory card after
sending CMD 12. It was not resulting in any failure but
we should recieve response after sending a command.
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
VirtioScsiDxe driver has been updated to use IOMMU-like member functions
from VIRTIO_DEVICE_PROTOCOL to translate the system physical address to
device address. We do not need to do anything special when
VIRTIO_F_IOMMU_PLATFORM bit is present hence treat it in parallel with
VIRTIO_F_VERSION_1.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When device is behind the IOMMU, driver is require to pass the device
address of virtio request, response and any memory referenced by those
request/response to the bus master.
The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to
map request and response buffers system physical address to the device
address.
- If the buffer need to be accessed by both the processor and a bus
master then map with BusMasterCommonBuffer.
- If the buffer need to be accessed for a write operation by a bus master
then map with BusMasterWrite.
However, after a BusMasterWrite Unmap() failure, error reporting via
EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET would be very complex,
therefore we map such buffers too with BusMasterCommonBuffer.
- If the buffer need to be accessed for a read operation by a bus master
then map with BusMasterRead.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: restore lost sentence/paragraph in commit message]
[lersek@redhat.com: reindent/reflow "InDataBuffer" comment block]
[lersek@redhat.com: cast arg, not result, of EFI_SIZE_TO_PAGES() to UINTN]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When virtio request fails we return EFI_DEVICE_ERROR, as per the spec
EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru() member function is required
to implement elaborated error reporting.
The patch refactors out entire block of the code that creates the host
adapter error into a separate helper function (ReportHostAdapterError).
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: fix style & typo in ReportHostAdapterError() comment]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When device is behind the IOMMU then driver need to pass the device
address when programing the bus master. The patch uses VirtioRingMap() to
map the VRING system physical address to device address.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Now that ArmDmaLib can take care of its own memory allocation needs,
let's get rid of UncachedMemoryAllocationLib entirely. This forces
platforms to declare the required semantics (non-cache coherent DMA,
whichever way it is implemented), rather than using uncached memory
allocations directly, which may not always be the right choice, and
prevents sharing of drivers between platforms if one is cache coherent
and the other is not.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
While modern AARCH64 server systems use ACPI for describing the platform
topology to the OS, ARM systems and AARCH64 outside of the server space
mostly use device tree binaries, which are compiled from device tree
source files using the device tree compiler.
Currently, such source files and binaries may be kept in the EDK2 platform
trees, but are not integrated with the build, which means they need to be
kept in sync and recompiled manually, which is cumbersome.
So let's wire up BaseTools support for them: add tool definitions for the
DTC compiler and preprocessor flags that allow these source files to use
FixedPcd expressions and other macros defined by AutoGen.h
This way, a device tree binary can be built from source and emitted into
a FFS file automatically using something like:
DeviceTree.inf:
[Defines]
INF_VERSION = 0x00010019
BASE_NAME = SomePlatformDeviceTree
FILE_GUID = 25462CDA-221F-47DF-AC1D-259CFAA4E326 # gDtPlatformDefaultDtbFileGuid
MODULE_TYPE = USER_DEFINED
VERSION_STRING = 1.0
[Sources]
SomePlatform.dts
[Packages]
MdePkg/MdePkg.dec
SomePlatform.fdf:
INF RuleOverride = DTB xxx/yyy/DeviceTree.inf
[Rule.Common.USER_DEFINED.DTB]
FILE FREEFORM = $(NAMED_GUID) {
RAW BIN |.dtb
}
where it can be picked at runtime by the DTB loader that may refer to it
using gDtPlatformDefaultDtbFileGuid.
Note that this is very similar to how ACPI tables may be emitted into a
FFS file with a known GUID and picked up by AcpiTableDxe at runtime.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI has description said If an AP is enabled, then the implementation must
guarantee that a complete initialization sequence is performed on the AP,
so the AP is in a state that is compatible with an MP operating system.
Current implementation just set the AP to idle state when enable this AP
which is not follow spec. This patch fix it.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
when "RequestIsWrite" is FALSE -- i.e., the CPU wants data from
the device, we map "Buffer" for VirtioOperationBusMasterWrite. In
this case, checking the return status of
Dev->VirtIo->UnmapSharedBuffer (Dev->VirtIo, BufferMapping);
is must. If the unmapping fails, then "Buffer" will not contain the
actual data from the device, and we must fail the request with
EFI_DEVICE_ERROR.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: fix typos in subject]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Replace the reference to the ARM specific ArmDmaLib with a reference
to the generic NonCoherentDmaLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Replace the reference to the ARM specific ArmDmaLib with a reference
to the generic NonCoherentDmaLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The non-coherent DmaLib implementation in ArmDmaLib no longer relies on
anything in ArmPkg. So clone it into EmbeddedPkg, and rename it to
NonCoherentDmaLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Bring CoherentDmaLib in line with ArmDmaLib, and add support for
defining a static offset between the host's and the bus master's
view of memory.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The name NullDmaLib suggests that this library is a placeholder that
only exists to fulfil formal dependencies on the DmaLib library class
without providing an actual implementation. This is not the case, though:
NullDmaLib does implement DmaLib fully, but doing so simply requires very
little effort on a cache coherent platform. So let's rename it to
CoherentDmaLib instead.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
EmbeddedPkg should be architecture agnostic, but a few issues were
preventing other architectures to build individual components directly
from the .dsc:
- The AndroidBoot/AndroidFastBoot support have a dependency on BdsLib,
which only has resolutions for ARM/AARCH64. Move them to an
arch-restricted Components section.
- The Isp1761UsbDxe driver is not 64-bit compatible. It should be
converted to UEFI driver model, but for now just move it to a new
Components.ARM section. (Also delete non-useful declaration for
AARCH64 in EmbeddedPkg.dec.)
- Lan9118Dxe has an unused ArmLib entry. Drop it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In this sample driver, if (0) {...} else {...} statements were used to
illustrate two different using scenarios.
This comment refines the coding style by substituting the 'if (0)'
statement with comments to select sample codes for different cases.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This driver does not rely on DmaLib at all, so don't declare it as a
dependency.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The virt targets never use non-coherent DMA, so there is no point
in having a shared DmaLib library class resolution pointing to
ArmDmaLib. So drop it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Some commands may cause current directory or even current mapping
become invalid. For example, "MAP" after unplugging the USB thumb
key may cause current mapping "FS0:" disappear.
This patch updates the CWD and current mapping when commands return.
It also causes the command prompt change to default "Shell>".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by Jaben Carsey <jaben.carsey@intel.com>
When "map -r" runs, the mapping list is re-created but
gShellCurMapping still points to the old mapping list which
is already destroyed.
The patch updates the gShellCurMapping to point to the correct
location in the new mapping list.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by Jaben Carsey <jaben.carsey@intel.com>
Star Zeng
Hao Wu
Laszlo Ersek
Ard Biesheuvel
Meenakshi Aggarwal
Brijesh Singh
Leif Lindholm
Liming Gao
Eric Dong
Ruiyu Ni
Huajing Li