According the Xhci Spec, TRB Rings may be larger than a Page, however they
shall not cross a 64K byte boundary, so add a parameter to indicate
whether the memory allocation is for TRB Rings or not. It will ensure the
allocation not crossing 64K boundary in UsbHcAllocMemFromBlock if the
memory is allocated for TRB Rings.
Signed-off-by: jdzhang <jdzhang@kunluntech.com.cn>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
If a device which support both features SR-IOV/ARI has multi
functions, which maybe support 8-255. After enable ARI forwarding in
the root port and ARI Capable Hierarchy in the SR-IOV PF0.
The device will support and expose multi functions(0-255) with ARI ID routing.
In next device loop in below for() code, actually it still be in the
same SR-IOV device, and just some PF which is over 8 or higher
one(n*8), PciAllocateBusNumber() will allocate bus
number(ReservedBusNum - TempReservedBusNum)) for this PF. if reset
TempReservedBusNum as 0 in this case,it will allocate wrong bus number
for this PF because TempReservedBusNum should be total previous PF's
reserved bus numbers.
code:
for (Device = 0; Device <= PCI_MAX_DEVICE; Device++) {
TempReservedBusNum = 0;
for (Func = 0; Func <= PCI_MAX_FUNC; Func++) {
//
// Check to see whether a pci device is present
//
Status = PciDevicePresent (
PciRootBridgeIo,
&Pci,
StartBusNumber,
Device,
Func
);
...
Status = PciAllocateBusNumber (PciDevice, *SubBusNumber,
(UINT8)(PciDevice->ReservedBusNum - TempReservedBusNum), SubBusNumber);
The solution is add a new flag IsAriEnabled to help handle this case.
if ARI is enabled, then TempReservedBusNum will not be reset again
during all functions(1-255) scan with checking flag IsAriEnabled.
Signed-off-by: Foster Nong <foster.nong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Below code will calculate the reserved bus number for the each PF.
Based on the VF routing ID algorithm, PFRid and LastVF in below code
already sure that "All VFs and PFs must have distinct Routing IDs".
PF will be assigned Routing ID based on secBusNumber, ReservedBusNum
will add into SubBusNumber directly. So the SR-IOV device will be
assigned bus range as SecBusNumber ~ (SubBusNumber=(SecBusNumber +
ReservedBusNum)).
Thus "+1" in below code will cause extra 1 bus, and introduce a bus hole.
PFRid = EFI_PCI_RID (Bus, Device, Func);
LastVF = PFRid + FirstVFOffset + (PciIoDevice->InitialVFs - 1) * VFStride;
PciIoDevice->ReservedBusNum = (UINT16)(EFI_PCI_BUS_OF_RID (LastVF) -
Bus + 1);
In SR-IOV spec, there is a note in section 2.1.2:
Note: Bus Numbers are a constrained resource. Devices are strongly
encouraged to avoid leaving ?holes? in their Bus Number usage to avoid
wasting Bus Numbers
So the issue can be fixed with below code change.
PciIoDevice->ReservedBusNum = (UINT16)(EFI_PCI_BUS_OF_RID (LastVF) -
Bus);
https://bugzilla.tianocore.org/show_bug.cgi?id=4069
Signed-off-by: Foster Nong <foster.nong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4053
Add LoongArch in INF for building CapsuleRuntimeDxe LoongArch64 image.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4053
Add LoongArch64 architecture to the Logo.
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4053
LoongArch doesn't have SMM by now.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Per the section 3.3.5 SR-IOV spec v1.1, InitialVFs (0ch).
InitialVFs indicates to SR-PCIM the number of VFs that are initially associated with the PF.
The minimum value of InitialVFs is 0.
Below code is used to calculate SR-IOV reserved bus number,
if InitialVFs =0, it maybe calculate the wrong bus number in this case.
LastVF = PFRid + FirstVFOffset + (PciIoDevice->InitialVFs - 1) * VFStride
we can fix it with below code:
if (PciIoDevice->InitialVFs == 0) {
PciIoDevice->ReservedBusNum = 0;
} else {
PFRid = EFI_PCI_RID (Bus, Device, Func);
LastVF = PFRid + FirstVFOffset + (PciIoDevice->InitialVFs - 1) * VFStride;
//
// Calculate ReservedBusNum for this PF
//
PciIoDevice->ReservedBusNum = (UINT16)(EFI_PCI_BUS_OF_RID (LastVF) - Bus + 1);
//
// Calculate ReservedBusNum for this PF
//
PciIoDevice->ReservedBusNum = (UINT16)(EFI_PCI_BUS_OF_RID (LastVF) - Bus + 1);
}
https://bugzilla.tianocore.org/show_bug.cgi?id=4069
Signed-off-by: Foster Nong <foster.nong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add support for partial free of non cached buffers.
If a request for less than the full size is requested new allocations
for the remaining head and tail of the buffer are added to the list.
Added verification that Buffer is EFI_PAGE_SIZE aligned.
The XHCI driver does this if the page size for the controller is >4KB.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4041
There is a mistake in getting MMIO base using PciDevicePpi that
can lead to the data corruption.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Maciej Czajkowski <maciej.czajkowski@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4051
The Type4 CurrentSpeed field may be various.
So this patch adds it into the filter table.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4011
AHCI commands are retried internally which prevents platform feature
like drive password to process correctly entered password on subsequent
attempts. PCD allows the platform to determine the number of retries.
Signed-off-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Updates debug macros in the package that have an imbalanced number
of print specifiers to arguments. These changes try to preserve
what was likely intended by the author. In cases information was
missing due to the bug, the specifier may be removed since it was
not previously accurately printing the expected value.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
https://bugzilla.tianocore.org/show_bug.cgi?id=4017
This change modifies NvmExpressPei library
to allow usage both EDKII_PCI_DEVICE_PPI and
EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI to manage Nvme device.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Xiao X Chen <xiao.x.chen@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Some print statements use format specifiers like %N/%H/%E/%B that are
only supported in the shell print functions. In the ordinary 'Print'
function they are just displayed as letters N/H/E/B.
Remove these unsupported format specifiers from the 'Print' statements
to fix the issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4013
For the SMBIOS version can be update by UPL,we create
the gUniversalPayloadSmbios3TableGuid HOB to store
the value then updated version.
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: KasimX Liu <kasimx.liu@intel.com>
Remove clearing CR0.WP when marking the memory used for page table
as read-only in the page table itself created by DxeIpl. This page
table address is written to Cr3 after these protection steps. Till
this, the memory used for page table is always RW.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Ref:https://bugzilla.tianocore.org/show_bug.cgi?id=4000
Change flow to bus scan all root bridge instances even when any
one root bridge meet bus resource OUT_OF_RESOURCE case.
thus platform handler of "EfiPciHostBridgeEndBusAllocation" has
an chance to do relative pci bus rebalance to handle this case.
Signed-off-by: Foster Nong <foster.nong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Since the API InitializeSeparateExceptionStacks is simplified and does't
use the struct CPU_EXCEPTION_INIT_DATA, CPU_EXCEPTION_INIT_DATA become
a inner implementation of CpuExcetionHandlerLib.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Hide the Exception implementation details in CpuExcetionHandlerLib and
caller only need to provide buffer
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3907
This change modifies AhciPei library to allow usage both EDKII_PCI_DEVICE_PPI
and EDKII_PEI_ATA_AHCI_HOST_CONTROLLER_PPI to manage ATA HDD working under
AHCI mode.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Maciej Czajkowski <maciej.czajkowski@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3907
This commit introduces EDKII_PCI_DEVICE_PPI. The purpose of this PPI is
to provide a way of accessing PCI devices to drvice drivers such as
NvmExpressPei or AhciPei.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Maciej Czajkowski <maciej.czajkowski@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3986
The EFI_STATUS_CODE_DATA_MAX_SIZE is defined as 200 in MdeModulePkg.
After reducing 96byte buffer for variable parameters it is limited to
only 104 char debug string. This is a non-necessary limitation.
This change sets EFI_STATUS_CODE_DATA_MAX_SIZE to 0x200, and moves
MAX_EXTENDED_DATA_SIZE definition to the same header file with value
of EFI_STATUS_CODE_DATA_MAX_SIZE + sizeof (EFI_STATUS_CODE_DATA)
which is used in ReportStatusCodeLib to support longer debug string.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Cosmo Lai <cosmo.lai@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3952
In UEFI spec, it defines reconnect timing that will be activated upon
exiting of the formset or the browser. However, we did't use this kind
of way to check reconnect conditioncode. Code only blocks reconnect if
page is updated dynamically. That's not matched spec'd way. We should
check current formset whether is exiting, then reconnect driver.
Signed-off-by: Walon Li <walon.li@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://https://bugzilla.tianocore.org/show_bug.cgi?id=3795
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Updated CoreInternalAllocatePages() to call PromoteMemoryResource() and
re-attempt the allocation if unable to convert the specified memory range
Signed-off-by: Stacy Howell <stacy.howell@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add support process Port Speed field value of PORTSC according to
Supported Protocol Capability (define in xHCI spec 1.1)
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3914
The value of Port Speed field in PORTSC bit[10:13]
(xHCI spec 1.1 section 5.4.8) should be change to use this value to
query thru Protocol Speed ID (PSI) (xHCI spec 1.1 section 7.2.1)
in xHCI Supported Protocol Capability and return the value according
the Protocol Speed ID (PSIV) Dword.
With this mechanism may able to detect more kind of Protocol Speed
in USB3 and also compatiable with three kind of speed of USB2.
Cc: Jenny Huang <jenny.huang@intel.com>
Cc: More Shih <more.shih@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Ian Chiu <Ian.chiu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3954
Report error if reserved bits are not 0 for PageSize
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Commit e7abb94d1 removed InitializeCpuExceptionHandlersEx
and updated DxeMain to call InitializeCpuExceptionHandlers
for exception setup. But the old behavior that calls *Ex() sets
up the stack guard as well. To match the old behavior,
the patch calls InitializeSeparateExceptionStacks.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Today InitializeCpuExceptionHandlersEx is called from three modules:
1. DxeCore (links to DxeCpuExceptionHandlerLib)
DxeCore expects it initializes the IDT entries as well as
assigning separate stacks for #DF and #PF.
2. CpuMpPei (links to PeiCpuExceptionHandlerLib)
and CpuDxe (links to DxeCpuExceptionHandlerLib)
It's called for each thread for only assigning separate stacks for
#DF and #PF. The IDT entries initialization is skipped because
caller sets InitData->X64.InitDefaultHandlers to FALSE.
Additionally, SecPeiCpuExceptionHandlerLib, SmmCpuExceptionHandlerLib
also implement such API and the behavior of the API is simply to initialize
IDT entries only.
Because it mixes the IDT entries initialization and separate stacks
assignment for certain exception handlers together, in order to know
whether the function call only initializes IDT entries, or assigns stacks,
we need to check:
1. value of InitData->X64.InitDefaultHandlers
2. library instance
This patch cleans up the code to separate the stack assignment to a new API:
InitializeSeparateExceptionStacks().
Only when caller calls the new API, the separate stacks are assigned.
With this change, the SecPei and Smm instance can return unsupported which
gives caller a very clear status.
The old API InitializeCpuExceptionHandlersEx() is removed in this patch.
Because no platform module is consuming the old API, the impact is none.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
InitializeCpuExceptionHandlers() expects caller allocates IDT while
InitializeCpuInterruptHandlers() allocates 256 IDT entries itself.
InitializeCpuExceptionHandlers() fills max 32 IDT entries allocated
by caller. If caller allocates 10 entries, the API just fills 10 IDT
entries.
The inconsistency between the two APIs makes code hard to
unerstand and hard to share.
Because there is only one caller (CpuDxe) for
InitializeCpuInterruptHandler(), this patch updates CpuDxe driver
to allocates 256 IDT entries then call
InitializeCpuExceptionHandlers().
This is also a backward compatible change.
With this change, InitializeCpuInterruptHandlers() is removed
completely.
And InitializeCpuExceptionHandlers() fills max 32 entries for PEI
and SMM instance, max 256 entries for DXE instance.
Such behavior matches to the original one.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3479
Adds support to the UEFI variable fault tolerant write (FTW) drivers
to receive FTW base and size information dynamically via the Variable
Flash Information library.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3479
Updates VariableRuntimeDxe, VariableSmm, and VariableStandaloneMm
to acquire variable flash information from the Variable Flash
Information library.
Note: This introduces a dependency on VariableFlashInfoLib in these
modules. Therefore, a platform building the variable modules must
specify an instance of VariableFlashInfoLib in their platform build.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3479
Adds a new library class VariableFlashInfoLib that abstracts access
to variable flash information. The instance provided first attempts
to retrieve information from the Variable Flash Info HOB. If that
HOB is not present, it falls back to the PCDs defined in
MdeModulePkg.
This fall back behavior provides backward compatibility for platforms
that only provide PCDs but also allows platforms that need to
dynamically provide the information using the Variable Flash Info HOB
to do so at runtime.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3479
Adds a new GUID that is used to identify a HOB that passes variable
flash information to UEFI variable drivers in HOB consumption phases
such as DXE, Traditional MM, and Standalone MM.
This information was previously passed directly with PCDs such
as EfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
and gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize.
However, the Standalone MM variable driver instance does not have
direct access to the PCD database. Therefore, this HOB will first
be considered as the source for variable flash information and
if platforms do not produce the HOB, reading the information from
the PCDs directly will be a backup to provide backward
compatibility.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3488
Current free pool routine from PiSmmCore will inspect memory guard status
for target buffer without considering pool headers. This could lead to
`IsMemoryGuarded` function to return incorrect results.
In that sense, allocating a 0 sized pool could cause an allocated buffer
directly points into a guard page, which is legal. However, trying to
free this pool will cause the routine changed in this commit to read XP
pages, which leads to page fault.
This change will inspect memory guarded with pool headers. This can avoid
errors when a pool content happens to be on a page boundary.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3917
When PlatformPkg.dsc has multiple SKU IDs but didn't exist delta PCD,
System will hang on BuildPcdDxeDataBase.
Ideally, if didn't exist delta PCD by different SKU ID,
UpdatePcdDatabase () shouldn't return EFI_NOT_FOUND.
Signed-off-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add modes for a few common display resolutions higher than 800x600,
specifically 1024x768, 1280x800 and 1920x1080, so ConSplitterDxe has
more options available.
The mode list is not use as-is, InitializeGraphicsConsoleTextMode() will
check the list and filter out any modes which don't fit to the screen,
so this will also work fine for small displays.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
When default/manufacturing flag get removed from numeric varid, it can't
get default value from StructurePcd in 'UpdateDefaultSettingInFormPackage'
function since there is no EFI_IFR_DEFAULT_OP opcode in IFR file. Add a
chance to get numeric default value from StructurePcd in the case that
numeric minimum value will be used as default value.
Signed-off-by: Chen Lin Z <lin.z.chen@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Function of UpdatePciInfo() in PciEnumeratorSupport.c is used to update
the bar information for those incompatible PCI device. It is the right
place to check if the OptionRom need to be ignored.
According to "Table 20. ACPI 2.0 & 3.0 QWORD Address Space Descriptor
Usage" in PI Spec 1.7, Type-specific flags can be set to 0 when Address
Translation Offset == 6 to skip device option ROM (do not probe option
rom BAR).
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Guest Physical Address (GPA) space in Td guest is divided into private
and shared sub-spaces, determined by the SHARED bit of GPA. This PCD
holds the shared bit mask. Its default value is 0 and it will be set
in PlatformPei driver if it is of Td guest.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3886
bRefClkFreq UFS card attribute need to be read and written after successful
fDeviceInit and NOP response so that link will be stable.
Cc: Wu Hao A <hao.a.wu@intel.com>
Cc: Albecki Mateusz <mateusz.albecki@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Purna Chandra Rao Bandaru <purna.chandra.rao.bandaru@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Previous commit fixed that check in DXE, this one now for PEI.
Signed-off-by: Mara Sophie Grosch <littlefox@lf-net.org>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Fix the check for NVMe command set being supported by the controller.
Was problematic with qemu (6.2.0, Debian 1:6.2+dfsg-3), which sets 0xC1
in that register, making the OVMF think the NVMe controller does not
support NVMe.
Uncovered by commit 9dd14fc91c, which
changed the number of bits included in the Css register from 4 to 8.
Signed-off-by: Mara Sophie Grosch <littlefox@lf-net.org>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The default 1s timeout can delay boot splash on some hardware with no
benefit.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2008
Correct the logic about whether 5-level paging is supported.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3851
When the UFS card comes out of Manufacturer, bRefClkFreq attribute is set
to 1h on the UFS card as per the Manufacturer Default Value
specified by the spec JESD220*. However, depends on the UFS host system
environment, it need to be set to the correct value.
Reference Clock Frequency value
0h:19.2 MHz
1h: 26 MHz
2h: 38.4 MHz
3h: Obsolete
Others: Reserved
Cc: Wu Hao A <hao.a.wu@intel.com>
Cc: Albecki Mateusz <mateusz.albecki@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Purna Chandra Rao Bandaru <purna.chandra.rao.bandaru@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
jdzhang
Foster Nong
Chao Li
Jeff Brasen
Jeff Brasen via groups.io
Czajkowski, Maciej
Heng Luo
Baraneedharan Anbazhagan
Michael Kubacki
Chen, Xiao X
Konstantin Aladyshev
KasimX Liu
Dun Tan
Liu, Zhiguang
Cosmo Lai
Walon Li
Stacy Howell
Ian Chiu
Ray Ni
Gua Guo
Kun Qin
Gerd Hoffmann
Chen, Lin Z
Min Xu
Bandaru, Purna Chandra Rao
Mara Sophie Grosch via groups.io
Sean Rhodes
Lou, Yun