Currently, MpInitLib will program AP stack in dynamic address. Each processor
will calculate its stack address by adding stack size based on the last stack
address. That means AP may have the different stack address everytime it is
wakeup by INIT-SIPI-SIPI.
When all APs have wakeup to execute AP task, each each has been assigned one
stack address. Once the timeout happened on some of APs, BSP will send INIT-
SIPI-SIPI to wake up APs. We need to re-assign stack for APs. Based on the
current implementation, we might assign one stack address used by other APs.
It will cause the unexpected stack overlapped issue.
This fix changed the stack assignment policy. We will record the stack address
assigned to AP at first time AP wakeup. When AP failed on AP task, BSP could
reassigned the same stack for it.
Getting initial APIC ID in assembly code could help AP to get saved its stack
address.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Cr3Location offset value should be 0x34 not 0x3C.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In MpInitLibInitialize(), invoke AsmGetAddress() to get get assembly functions'
entry addresses and the sizes from returned MP_ASSEMBLY_ADDRESS_MAP structure.
v5:
1. Add more detailed comments for structure MP_ASSEMBLY_ADDRESS_MAP.
v4:
1. Add AsmRelocateApLoop information return in AsmGetAddress().
v3:
1. Rename AsmRellocateApLoop to AsmRelocateApLoop.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
AsmRelocateApLoop() is used to place APs into MWAIT-loop if MonitorMwait
feature is supported before hand-off to OS, or place APs into HLT-loop if
MonitorMwait feature is not supported.
If the current mode is long mode, we will switch APs to protected mode
before placing APs in MWAIT-loop or HLT-loop. Thus, once APs wakeup from
loop, APs needn't the page table that may be crashed by OS.
v3:
1. Rename AsmRellocateApLoop to AsmRelocateApLoop.
2. Fix typo Proteced to Protected.
3. Fix typo segement to segment
4. Use word MONITOR instead of mwait-monitor.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
EnableExecuteDisable in MP_CPU_EXCHANGE_INFO is used to tell AP reset vector if
enable execute disable feature on APs. This feature should be enabled before CR3
is written.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Add assembly code for AP reset vector and the definition of MP_CPU_EXCHANGE_INFO
that are used to exchange the data between C code and assembly code when AP wake
up.
v4:
1. Copy MP_CPU_EXCHANGE_INFO from UefiCpuPkg/CpuMpPei/CpuMpPei.h
2. Copy MpEqu.inc and MpFuncs.nasm from UefiCpuPkg/CpuMpPei.
v3:
1. Rename NumApsExecutingLoction to NumApsExecutingLocation
2. Add whitespace after ; in .nasm file
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan