PCI_REG_PCIE_SLOT_CONTROL contains a typo. It is defined as:
typedef union {
struct {
UINT32 AttentionButtonPressed : 1;
UINT32 ...
...
} Bits;
UINT16 Uint16;
} PCI_REG_PCIE_SLOT_CONTROL;
The bit field data type should be UINT16 instead of UINT32,
results sizeof (PCI_REG_PCIE_SLOT_CONTROL) equals to 4 instead of 2.
Because this structure is used in PCI_CAPABILITY_PCIEXP as below:
typedef struct {
...
PCI_REG_PCIE_SLOT_CONTROL SlotControl;
PCI_REG_PCIE_SLOT_STATUS SlotStatus;
} PCI_CAPABILITY_PCIEXP;
It cause the OFFSET_OF (PCI_CAPABILITY_PCIEXP, SlotStatus) equal
to a wrong value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Revision 2.2 of the PCI Spec defines Capability IDs 0 through 6,
inclusive, in Appendix H. It reserves IDs 7 through 255.
Revision 2.3 of the PCI Spec adds Capability IDs 7 through 0xC, inclusive,
in Appendix H. Capability ID 9 stands for "Vendor Specific".
Add the EFI_PCI_CAPABILITY_ID_VENDOR macro and the
EFI_PCI_CAPABILITY_VENDOR_HDR structure type to MdePkg/IndustryStandard,
in order to describe this capability header.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch adds a few more UDF volume structures in order to detect an
UDF file system which is supported by current EDK2 UDF file system
implementation in Partition driver.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Hao Wu <hao.a.wu@intel.com>
Build-tested-by: Star Zeng <star.zeng@intel.com>
Build-tested-by: Paulo Alcantara <paulo@hp.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This patch adds basic volume structure definitions necessary to identify
a valid UDF file system on a block device, as specified by OSTA
Universal Disk Format Specification 2.60.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The patch adds new macro PCI_ECAM_ADDRESS into PciExpress21.h,
to align to the PCIE spec, and also update PciExpressLib.h to
redirect PCI_EXPRESS_LIB_ADDRESS to the new macro.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The definition for 1.1a has no difference with 1.0.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This updates the IORT header to include the definitions that were added
in revision C of the IORT spec that was made public recently.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This adds #defines and struct typedefs for the various node types in
the ACPI 6.0 IO Remapping Table (IORT).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <yiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=363
The definition name for ACPI IO Remapping Table signature is incorrect
in Acpi60.h and Acpi61.h as below:
EFI_ACPI_6_0_INTERRUPT_SOURCE_OVERRIDE_SIGNATURE
EFI_ACPI_6_1_INTERRUPT_SOURCE_OVERRIDE_SIGNATURE
The name should be changed to
EFI_ACPI_6_0_IO_REMAPPING_TABLE_SIGNATURE
EFI_ACPI_6_1_IO_REMAPPING_TABLE_SIGNATURE
The comments
///
/// "IORT" Interrupt Source Override
///
will be also changed to
///
/// "IORT" I/O Remapping Table
///
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
DEVICE_ID_NOCARE is defined as 0xFFFF but Spec says (UINT64) -1
should be used to match any VendorId/DeviceId/RevisionId/
SubsystemVendorId/SubsystemDeviceId.
PCI_BAR_OLD_ALIGN/PCI_BAR_EVEN_ALIGN/PCI_BAR_SQUAD_ALIGN/
PCI_BAR_DQUAD_ALIGN are defined but Spec doesn't have such
definitions.
PCI_BAR_ALL is defined as 0xFF but Spec says (UINT64)-1 should be
used to match all BARs.
PCI_ACPI_UNUSED and PCI_BAR_NOCHANGE are defined as 0 which
compliant with Spec but the name is too general and causes confusing.
IncompatiblePciDeviceSupport could directly use 0.
All of the above macros are marked as deprecated.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=340
TPM Device (Type 43) definition has been added at
713e4b007c.
This patch is to add definitions for below items.
• BIOS Information (Type 0):
– Add new entry for extended BIOS ROM size
• System Enclosure or Chassis (Type 3):
– Add new chassis types: IoT Gateway and Embedded PC
– Add new chassis types: Mini PC and Stick PC
• Processor Information (Type 4):
– Add Intel Core m3 m5 m7 processors
– Add processor socket AM4
– Add processor socket LGA1151
– Add processor socket BGA1356, BGA1440, BGA1515
– Add AMD Opteron A-Series processor
– Add processor socket LGA3647-1
– Add processor socket SP3 Processors
– Add families for ARMv7 and ARMv8
– Add family for AMD Opteron(TM) X3000 Series APU
• Cache Information (Type 7):
– Extend to support Cache sizes >2047 MB
• System Slots (Type 9):
– Add Mini PCIe support
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Starting with SMBIOS spec version 2.7, Type 3 added SKU Number.
SKU Number is at a variable offset (depends on count and length of Contained Elements), so cannot add SKU Number to the SMBIOS_TABLE_TYPE3 structure.
Adding comments to explain how to get SKU Number.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Added definitions for the new SMBIOS Type 43 record.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Augustine Linson P <linson.augustine@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Fix incompatible change. Some modules are still referencing old definition.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Update TPM2 ACPI Table revision to 4. New version & data structure is
defined in TCG ACPI Spec 00.37
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
This path is used to standardize TLS definitions from related
RFCs. Including TLS Cipher Suites, TLS Version, TLS Content Type
and TLS Record Header, etc.
Cc: Long Qin <qin.long@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Thomas Palmer <thomas.palmer@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=201
In V3, Use Odt to replace ODT, Cke to replace CKE, Id to replace ID,
and Cl to replace CL in structure field name.
In V2, separate DDR3, DDR4 and LPDDR definition into the different files;
use the different SPD prefix as structure definitions for each SPD type.
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
The "Pci22.h" header file defines the macro EFI_PCI_CAPABILITY_ID_HOTPLUG
with value 0x06. According to all of:
- later parts of the same header file,
- Appendix H ("Capability IDs") of the PCI Local Bus Specification
Revision 2.3,
- and Chapter 2 ("Capability IDs") of the PCI Code and ID Assignment
Specification Revision 0.9,
0x06 means "CompactPCI Hot Swap". It does not mean "PCI Hot-Plug": that
capability is described by ID 0x0C:
0Ch PCI Hot-Plug -- This Capability ID indicates that the associated
device conforms to the Standard Hot-Plug Controller model.
Therefore EFI_PCI_CAPABILITY_ID_HOTPLUG is arguably a misnomer. PciBusDxe
(mis-)uses EFI_PCI_CAPABILITY_ID_HOTPLUG in the IsSHPC() helper function
to identify PCI Hot-Plug capability.
In order to preserve compatibility with existent code, leave
EFI_PCI_CAPABILITY_ID_HOTPLUG alone, and introduce
EFI_PCI_CAPABILITY_ID_SHPC with the right ID value.
Cc: "Johnson, Brian J." <bjohnson@sgi.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
v2:
*add some new arch types for PXE boot.
refine the definition of arch types for http boot
Add a new head file Dhcp.h in Mde/Include/IndustryStandard, normalize the
universal option numbers and other network number tags.
Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The definitions are required by certain platform initialization
code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Reviewed-by: Amy Chan <amy.chan@intel.com>
Adds a public header for NVMe v1.1 spec. definitions. The majority
of these definitions where copied from a private header in
MdeModulePkg/Bus/Pci/NvmExpress/NvmExpressHci.h. Additional
definitions were added e.g. the NVMe Smart Health Log and
Firmware Info. Log structures. These definitions should be
in a public header so that clients of the NVMe passthru protocol
can use them to execute NVMe commands.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Darbin Reyes <darbin.emm.reyes@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to the SCSI Block Commands - 4 (SBC-4) spec, the patch add SCSI
unmap command support in IndustryStandard/Scsi.h.
The following changes have been made:
1. Add SCSI unmap command OP Code
2. Update the structure definition for Block Limits VPD page
3. Add structure definitions for UNMAP parameter list header & UNMAP block
descriptor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add NFIT definition from ACPI 6.1 for the NVDIMM Control Region
Structure Valid Fields for Manufacturing Location and Manufacturing Date
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The ComId for Block SID authentication command is
0x0005 according to "TCG Storage Feature Set: Block
SID Authentication Specification Version 1.0.0". Update code to
follow this spec requirement.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add #defines for "Expect" header, which is a part of RFC 2616
and used for HTTP PUT/POST operations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The Microsoft Debug Port Table 2 (DBG2) specification revision
October 6, 2015 adds support for Serial Port Subtypes for ARM.
This patch adds these definitions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The Serial Port Console Redirection Table specification Version 1.03 -
August 10, 2015 adds support for Serial Port Subtypes for ARM. These
Subtypes are described in the Table 3 of the Microsoft Debug Port Table
2 (DBG2) Specification - December 10, 2015.
This patch adds macro definitions for these.
Code at: 79678a0f39
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
These definitions are defined in SD physical layer simplified spec
and eMMC electrical standard spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The definitions are defined in TCG storage core and opal spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Ruiyu Ni
Star Zeng
Laszlo Ersek
Paulo Alcantara
Jiewen Yao
Ard Biesheuvel
Hao Wu
Zhang, Chao B
Chris Phillips
Linson Augustine
Jiaxin Wu
Liming Gao
Gary Lin
Giri P Mudusuru
Feng Tian
Zhang Lubo
Darbin Reyes
Samer El-Haj-Mahmoud
Eric Dong
Nagaraj Hegde
Sami Mujawar