1. In AsmFuncs.asm, DebugSupport, Vect2Desc() function will use hardcode CS to fill the IDT. 20h for Ia32.If the system CS is changed by CPU driver, this driver can not work. System maybe crash.
2. In EBC, RegisterExceptionCallback() can not restore the environment and I add some enhancements.
3. In Image.c, CoreLoadImageCommon never return EFI_SECURITY_VIOLATION when SecurityStatus == EFI_SECURITY_VIOLATION.
4. In Variable.c, 1. There're additional unnecessary loop. All blocks will be gone through even if all the data has been written. We should check the "CurrWriteSize" to see if there's no more data to write, and stop the for loop immediately. 2 "if.else." can be merged to save lines of code.
5. in FvbServices,c, Checksum calculation error.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@1891 6f19259b-4bc3-4df7-8a09-765794883524
i) BMM_FAKE_NV_DATA definition inconsistent in bm.vfr and BootMain.h
(EdkNt32Pkg\Dxe\PlatformBdsDxe\Generic\BootMaint\BootMain.h)
ii) Change some files’ EOL(end of line) format to DOS. Some file use even mixed style EOL.
(EdkModulePkg\Universal\DevicePath\Dxe\DevicePath.c, DevicepathFromText.c, DevicePathUtilities.c;
EdkModulePkg\Universal\Disk\DiskIo\Dxe\diskIo.c; MdePkg\Library\UefiLib\UefiNotTiano.c)
iii) Change some illegal characters in many files, the problem is mainly connected with people using Chinese Input method to input symbols such as ' " - ?, etc. Multiple files are influenced.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@1890 6f19259b-4bc3-4df7-8a09-765794883524
2. Bug fix for "[FT] in new BDS, add a long item in Boot Option will cause an empty line appear";
3. Bug fix for "In "SetBootNextValue" page,description does not display properly"
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@1889 6f19259b-4bc3-4df7-8a09-765794883524
a. Add a module with PCD type Dyn.
If this PCD not exists in platform,
ModuleSA.PcdType is set as Dyn (choose one from spd).
Else
ModuleSA.PcdType is set as existing type ?
(Give a error message if this module pcd can NOT be set as existing type. And Pcd will not be added for this module into platform.)
If PCD type is determined to be Dyn.
Add PCD to DynamicPcdBuildDefinitions if it not exists there.
SkuId = 0;
SkuInfo.value = MSA default | SPD default | give default based on DatumType.
If DatumType == void*
Set ModuleSA.PcdMaxDatumSize;
b. Add a module with PCD type DynEx.
If this PCD not exists in platform,
ModuleSA.PcdType is set as DynEx.
Else
ModuleSA.PcdType is set as existing type ?
(Give a error message if this module pcd can NOT be set as existing type. And Pcd will not be added for this module into platform.)
Add PCD to DynamicPcdBuildDefinitions if it not exists there.
SkuId = 0;
SkuInfo.value = MSA default | SPD default | give default based on DatumType.
If DatumType == void*
Set ModuleSA.PcdMaxDatumSize;
c. Add a module with PCD type FixedAtBuild, PIM, FF
If this PCD not exists in platform,
ModuleSA.PcdType is set as FaB | PIM | FF.
Else
ModuleSA.PcdType is set as existing type ?
(Give a error message if this module pcd can NOT be set as existing type. And Pcd will not be added for this module into platform..)
ModuleSA.PcdValue = MSA default | SPD default | give default based on DatumType.
If DatumType == void*
Set ModuleSA.PcdMaxDatumSize;
d. Edit ModuleSA.PcdType
Get the corresponding MSA.PcdType in MSA file for this ModuleSA.
If MSA.PcdType == Dyn.
ModuleSA.PcdType could be [(valid Pcd types in SPD)]
Else
ModuleSA.PcdType can NOT be changed.
1) Change ModuleSa.PcdType from Dynamic. to [valid Pcd types in SPD]:
All same PCDs in FrameworkModules are changed to one of valid Pcd types in SPD according to user selection.
Check in whole platform other ModuleSA for the same pcd, if the corresponding MSAes for other ModuleSAes pcd can NOT accept the new type, give error message.
Keep old ModuleSA.PcdValue.
Remove this PCD in DynamicPcdBuildDefintion.
2) Change ModuleSa.PcdType from [FaBor PIM] to Dynamic, DynEx.:
All same PCDs in FrameworkModules are changed to Dynamic | DynEx.
Check in whole platform other ModuleSA for the same pcd, if the corresponding MSAes for other ModuleSAes pcd can NOT accept the new type, give error message.
Keep old ModuleSA.PcdValue?
Add one new dynamic PCD in DynamicPcdBuildDefintion.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@1888 6f19259b-4bc3-4df7-8a09-765794883524
2. In Graphics.c, Memory Leak in Graphics Library, ConvertBmpToUgaBlt().
3. In HobLib.c, PeiBuildHobModule and three other functions do not zero hob reserved data area according to HOB spec v0.9.
4. In statuscode.h, the number of definition of EFI_SW_PEIM_PC_CAPSULE_START is equal to EFI_SW_PEIM_PC_CAPSULE_LOAD.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@1861 6f19259b-4bc3-4df7-8a09-765794883524
2. Fix EDKT442 After some modifications and refresh, there will show a dialog for save all files. The operation of erasing this dialog should be regarded as Cancel, not refresh wizard.
3. Fix EDKT455 The style of menu should be unified
4. Fix EDKT439 After some modifications and exit, there will show a dialog for save all files. The operation of erasing this dialog should be regard as Cancel, not exit wizard.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@1851 6f19259b-4bc3-4df7-8a09-765794883524
jwang36
xli24
hche10x
mikewuping
qwang12
cwu11
dtang2
jlin16
jjin9
jtang12
bbahnsen
ajfish
wuyizhong
lhauch
lgao4
alfred
qhuang8
ljin6