Building the DynamicTablesPkg with the additional
-Wpointer-arith flag triggers the following error:
"pointer of type ‘void *’ used in arithmetic
[-Werror=pointer-arith]"
Cast the void pointer to fix the error.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
In the success case we should return EFI_SUCCESS rather than returning
a potentially unitialized value of Status.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Moritz Fischer <moritzf@google.com>
In the GIC interrupt model, logical processors are required to
have a Processor Device object in the DSDT and must convey each
processor's GIC information to the OS using the GICC structure.
Additionally, _LPI objects may be needed as they provide a method
to describe Low Power Idle states that defines the local power
states for each node in a hierarchical processor topology.
Therefore, add support to generate the CPU topology and the LPI
state information in an SSDT table.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Introduce the CM_ARM_LPI_INFO CmObj in the ArmNameSpaceObjects.
This allows to describe LPI state information, as described in
ACPI 6.4, s8.4.4.3 "_LPI (Low Power Idle States)".
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlAddLpiState() to generates AML code to add an _LPI state
to an _LPI object created using AmlCreateLpiNode().
AmlAddLpiState increments the count of LPI states in the LPI
node by one, and adds the following package:
Package() {
MinResidency,
WorstCaseWakeLatency,
Flags,
ArchFlags,
ResCntFreq,
EnableParentState,
(GenericRegisterDescriptor != NULL) ? // Entry method. If a
ResourceTemplate(GenericRegisterDescriptor) : // Register is given,
Integer, // use it. Use the
// Integer otherwise
ResourceTemplate() { // NULL Residency
Register (SystemMemory, 0, 0, 0, 0) // Counter
},
ResourceTemplate() { // NULL Usage Counter
Register (SystemMemory, 0, 0, 0, 0)
},
"" // NULL State Name
},
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
_LPI object provides a method to describe Low Power Idle
states that define the local power states for each node
in a hierarchical processor topology.
Therefore, add AmlCreateLpiNode() to generate code for a
_LPI object.
AmlCreateLpiNode ("_LPI", 0, 1, ParentNode, &LpiNode) is
equivalent of the following ASL code:
Name (_LPI, Package (
0, // Revision
1, // LevelId
0 // Count
))
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenMethodRetNameString() to generate AML code to create
a Method returning a NameString (NS).
AmlCodeGenMethodRetNameString (
"MET0", "_CRS", 1, TRUE, 3, ParentNode, NewObjectNode
);
is equivalent of the following ASL code:
Method(MET0, 1, Serialized, 3) {
Return (_CRS)
}
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenReturnNameString() to generate AML code for a
Return object node, returning the object as a NameString.
AmlCodeGenReturn ("NAM1", ParentNode, NewObjectNode) is
equivalent of the following ASL code:
Return(NAM1)
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenMethod() to generate code for a control method.
AmlCodeGenMethod ("MET0", 1, TRUE, 3, ParentNode, NewObjectNode)
is equivalent of the following ASL code:
Method(MET0, 1, Serialized, 3) {}
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
ASL provides a ResourceTemplate macro that creates a Buffer in which
resource descriptor macros can be listed. The ResourceTemplate macro
automatically generates an End descriptor and calculates the checksum
for the resource template.
Therefore, add AmlCodeGenResourceTemplate() to generate AML code for
the ResourceTemplate() macro. This function generates a Buffer node
with an EndTag resource data descriptor, which is similar to the ASL
ResourceTemplate() macro.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Some AML object have a PkgLen which indicates the size of the
AML object. The package length can be encoded in 1 to 4 bytes.
The bytes used to encode the PkgLen is itself counted in the
PkgLen value. So, if an AML object's size increments/decrements,
the number of bytes used to encode the PkgLen value can itself
increment/decrement.
Therefore, a helper function AmlComputePkgLength() is introduced
to simply computation of the PkgLen.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenPackage() to generate AML code for declaring
a Package() object. This function generates an empty package
node. New elements can then be added to the package's variable
argument list.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add a helper function AmlCodeGenEndTag() to generate AML Resource Data
EndTag. The EndTag resource data is automatically generated by the ASL
compiler at the end of a list of resource data elements. Therefore, an
equivalent function is not present in ASL.
However, AmlCodeGenEndTag() is useful when generating AML code for the
ResourceTemplate() macro.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenRegister() to generate AML code for the
Generic Register Resource Descriptor. This function is
equivalent to the ASL macro Register().
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Remove the STATIC qualifier for the AmlUtility function
AmlNodeGetIntegerValue() and add the definition to the
header file so that it can be used by other AmlLib
sub-modules.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The node creation functions:
- AmlCreateRootNode()
- AmlCreateObjectNode()
- AmlCreateDataNode()
are now resetting the input pointer where the created node is stored.
Thus, it is not necessary to set some local variables to NULL or
check a node value before trying to delete it.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The following functions:
- AmlCreateRootNode()
- AmlCreateObjectNode()
- AmlCreateDataNode()
create a node and return it by populating a pointer. This pointer
should only be considered/used if the function returns successfully.
Otherwise, the value stored in this pointer should be ignored.
For their error handling, some other functions assume that this
pointer is reset to NULL if an error occurs during a node creation.
To make this assumption correct, explicitly clear this input pointer.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
ACPI 6.4, s6.4.2.9 "End Tag":
"This checksum is generated such that adding it to the sum of all the data
bytes will produce a zero sum."
"If the checksum field is zero, the resource data is treated as if the
checksum operation succeeded. Configuration proceeds normally."
To avoid re-computing checksums, if a new resource data elements is
added/removed/modified in a list of resource data elements, the AmlLib
resets the checksum to 0.
This patch also refactors the AmlAppendRdNode() function by getting the
last Resource Data node directly instead of iterating over all the
elements of the list of Resource Data node.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Lists of Resource Data elements end with an EndTag (most of the time).
This function finds the EndTag (if present) in a list of Resource Data
elements and sets the checksum.
ACPI 6.4, s6.4.2.9 "End Tag":
"This checksum is generated such that adding it to the sum of all the data
bytes will produce a zero sum."
"If the checksum field is zero, the resource data is treated as if the
checksum operation succeeded. Configuration proceeds normally."
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlRdSetEndTagChecksum(), setting the CheckSum value contained in a
Resource Data element.
ACPI 6.4, s6.4.2.9 "End Tag":
"This checksum is generated such that adding it to the sum of all the
data bytes will produce a zero sum."
"If the checksum field is zero, the resource data is treated as if the
checksum operation succeeded. Configuration proceeds normally."
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
To fetch the Oem information from the ConfigurationManagerProtocol
and the AcpiTableInfo, and populate the SSDT ACPI header when
creating a RootNode via the AmlLib, create AddSsdtAcpiHeader().
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add missing check of 'AcpiTableInfo' in AddAcpiHeader().
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Buzilla: 3565 (https://bugzilla.tianocore.org/show_bug.cgi?id=3565)
As part of the updates to ACPI 6.4 the "SBSA Generic Watchdog" was
renamed to the "Arm Generic Watchdog". This patch implements that
change by updating the GTDT generator to use Acpi64.h and renames
any occurence of "SBSA Generic Watchdog" to "Arm Generic Watchdog".
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Rework all the functions to to have a generic prototype:
- First take take the resource data specific arguments.
E.g.: for a Register(): the AddressSpace, BitWidth, ...
- The penultimate parameter is a NameOpNode. The resource data
created is appended to the ResourceTemplate() contained in the
NameOpNode.
- The last parameter is a pointer holding the created resource data.
A least one of the two last parameter must be provided. One of them can
be omitted. This generic interface allows to either:
- Add the resource data to a NameOpNode. This is a common case for the
Ssdt tables generator.
- Get the created resource data and let the caller place it in an AML
tree.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Some functions in the AmlLib have 'Crs' in their name and can only
be applied to '_CRS' AML objects. To re-use them on AML objects that
have different names:
- Rename them and remove the '_CRS' name check.
- Create aliases having of the 'Crs' function prototypes. These
aliases are available when DISABLE_NEW_DEPRECATED_INTERFACES
is not defined. They will be deprecated in a near future.
The deprecated functions are:
- AmlNameOpCrsGetFirstRdNode()
- AmlNameOpCrsGetNextRdNode()
- AmlCodeGenCrsAddRdInterrupt()
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
To prepare edk2 upstream CI for incoming modifications:
1- Disable the Ecc check 9005:
"Only Doxygen commands '@bug', '@todo', [...], '@{', '@}'
are allowed to mark the code Unknown doxygen command [...]"
2- Disable the Ecc check 8003 for the following keyword:
"DISABLE_NEW_DEPRECATED_INTERFACES"
Indeed, this error has been corrected on the latest version of
BaseTools, but is still triggered when using the older python
packages containing the BaseTools.
3- Add word exceptions for the cspell tool.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The correct formatter to print a CHAR8 char in edk2 is '%a'.
Replace the '%s' formatters by '%a'.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The Platform information repository in the Configuration Manager
may be dynamically populated, for e.g. by a Hardware Information
Parser like FdtHwInfoParser. In such cases it is useful to trace
the CM objects that were populated by the parser.
Therefore, introduce helper functions that can parse and trace
the Configuration Manager Objects.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add a function converting a 7 characters string to its UINT32
EISAID. The algorithm used to create the EISAID is described
in the ACPI 6.4 specification, s19.3.4 "ASL Macros".
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add HexFromAscii(), converting an hexadecimal ascii char
to an integer.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The Ecc tool forbids the usage of one char variable: Ecc error 8007:
"There should be no use of short (single character) variable names"
To follow this policy, rename this one letter parameter.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Update the inf file version and BASE_NAME of the library.
Remove unused sections.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The TableHelperLib contains helper functions. Some rely on
DynamicTablesPkg definitions (they use Configuration Manager objects).
Some others are more generic.
To allow using these generic functions without including
DynamicTablesPkg definitions, move them to a new AcpiHelperLib
library.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Use the newly introduced defined value in:
MdePkg/Include/IndustryStandard/AcpiAml.h
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The DBG2 table generator set the access size for the UART to
DWORD (4 bytes) by default. However, according to Section B
Generic UART, Arm Base System Architecture 1.0, Platform
Design Document, a Generic UART can have BYTE, WORD or DWORD
access sizes. To address this an AccessSize field has been
introduced in CM_ARM_SERIAL_PORT_INFO object.
This patch updates the DBG2 generator to setup the AccessSize
field in the Generic Address Structure (GAS) for the UART in
the DBG2 table with information provided by the platform.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The SPCR table generator set the access size for the UART to
DWORD (4 bytes) by default. However, according to Section B
Generic UART, Arm Base System Architecture 1.0, Platform
Design Document, a Generic UART can have BYTE, WORD or DWORD
access sizes. To address this an AccessSize field has been
introduced in CM_ARM_SERIAL_PORT_INFO object.
This patch updates the SPCR generator to setup the AccessSize
field in the Generic Address Structure (GAS) for the UART in
the SPCR table with information provided by the platform.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add access size to CM_ARM_SERIAL_PORT_INFO so that this can be
passed down to the Generic Address Structure.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The EArmObjExtendedInterruptInfo doesn't exist. Remove any reference
to this enum.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The structure is not correctly placed in the file. Move it
so it follows the EARM_OBJECT_ID enum order.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
According to ACPI 6.4, 6.1.5 _HID states:
- A valid PNP ID must be of the form "AAA####" where A is an uppercase
letter and # is a hex digit.
- A valid ACPI ID must be of the form "NNNN####" where N is an uppercase
letter or a digit ('0'-'9') and # is a hex digit.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3246
MdeLibs.dsc.inc was added for some basic/default library
instances provided by MdePkg and RegisterFilterLibNull Library
was also added into it as the first version of MdeLibs.dsc.inc.
So update platform dsc to consume MdeLibs.dsc.inc for
RegisterFilterLibNull which will be consumed by IoLib and BaseLib.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Building the DynamicTablesPkg for a NOOPT target
fails because unused variables are set.
Remove these variables.
Fixes: d9800046ea
Reported-by: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Some platforms advertise support for a 16550 UART, but are not
compatible with the PNP0500 HID. Allow them to override the HID by
setting PcdNonBsaCompliant16550SerialHid.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The Generic ACPI for Arm Components 1.0 Platform Design
Document, s2.6.4 "ASL code examples" provides information
to describe an Arm CoreLink CMN-600 Coherent Mesh Network
using an ASL definition block table.
The SSDT CMN-600 Table Generator uses the Configuration
Manager protocol to obtain the following information about
the CMN-600 device on the platform:
- the PERIPHBASE address location and address range;
- the ROOTNODEBASE address location;
- the number of Debug and Trace Controller (DTC)
and their respective interrupt number;
The CMN-600 mesh is described using the CM_ARM_CMN_600_INFO
and CM_ARM_EXTENDED_INTERRUPT structures in the Configuration
Manager.
The SSDT CMN-600 Table generator:
- gets the CMN-600 hardware information
from the configuration manager.
- uses the AmlLib interfaces to parse the AML
template BLOB and construct an AML tree.
- uses the AmlLib to update:
- the "_UID" value;
- the address location and range of the PERIPHBASE;
- the address location of the ROOTNODEBASE;
- the number of Debug and Trace Controller (DTC)
and their respective interrupt number;
- serializes the AML tree to an output buffer.
This output buffer contains the fixed-up AML code,
which is then installed as an ACPI SSDT table.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Co-authored-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Fix the following ECC reported errors in SsdtSerialPortFixupLib.
- [9002] The function headers should follow Doxygen special
documentation blocks in section 2.3.5 in Comment,
<@param [in]> does NOT have [in, out]
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Change the AML_DEBUG_STR() macro to AML_OPCODE_DEF() that takes a string
and the AML OpCode as input so that the text description and the AML
OpCode are grouped. The AML_OPCODE_DEF() macro also strips the string
description for release builds.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Fix ECC error 8001 reported errors in AmlDbgPrint.
[8001] Only capital letters are allowed to be used
for #define declarations.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Pierre Gondois
Moritz Fischer
Chris Jones
Sami Mujawar
Joey Gouly
Dandan Bi