Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Kelly Steele <kelly.steele@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
In ARM/AARCH64 guests that run on KVM, we can now use virtio-gpu-pci, so
PcdKludgeMapPciMmioAsCached is no longer necessary. Standard VGA continues
to work on TCG without the kludge.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In this patch we replace our "dummy" Graphics Output Protocol interface
with the real one. We exploit that EFI_GRAPHICS_OUTPUT_BLT_PIXEL and
VirtioGpuFormatB8G8R8X8Unorm have identical representations; this lets us
forego any pixel format conversions in the guest. For messaging the VirtIo
GPU device, we use the primitives introduced in the previous patch.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In this patch we add a "workhorse" function called VirtioGpuSendCommand(),
and implement seven simple RPCs atop, for the command types listed in
"OvmfPkg/Include/IndustryStandard/VirtioGpu.h".
These functions will be called by our EFI_GRAPHICS_OUTPUT_PROTOCOL
implementation.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch implements the steps listed in section "3.1.1 Driver
Requirements: Device Initialization" of the Virtio V1.0 Committee Spec 04.
The VirtIo GPU is brought up in VirtioGpuDriverBindingStart(), and down in
VirtioGpuDriverBindingStop().
We also add an ExitBootServices() callback that resets the device. This
ensures that the device model abandons any guest memory areas when we
transfer control to the guest OS.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
At this stage, the driver builds, and suffices for testing binding and
unbinding.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
At this stage, the driver builds, and suffices for testing binding and
unbinding.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch adds the skeleton of the driver: it implements the Component
Name 2 Protocol and the Driver Binding Protocol, in accordance with the
generic and GOP-specific requirements set forth in the UEFI spec and the
Driver Writers' Guide.
The basic idea is that VGPU_DEV abstracts the virtio GPU device, while the
single VGPU_GOP that we intend to support at this point stands for "head"
(aka "scanout") #0.
For now, the Virtio Device Protocol is only used for driver binding; no
actual virtio operations are done yet. Similarly, we use a "dummy" GOP
GUID and protocol structure (a plain UINT8 object) for now, so that
GOP-consuming drivers don't look at what we produce just yet.
The driver is a bit different from the other virtio device drivers written
thus far:
- It implements the GetControllerName() member of the Component Name 2
Protocol. (Formatting helpful names is recommended by UEFI.) As a "best
effort", we format the PCI BDF into the name (a PCI backend is not
guaranteed by VIRTIO_DEVICE_PROTOCOL). It should provide a more friendly
experience in the shell and elsewhere.
- This driver seeks to support all RemainingDevicePath cases:
- NULL: produce all (= one) child handles (= VGPU_GOP heads) at once,
- End of Device Path Node: produce no child handles,
- specific ACPI ADR Node: check if it's supportable, and produce it
(only one specific child controller is supported).
This is one of the reasons for separating VGPU_GOP from VGPU_DEV.
The driver is a hybrid driver: it produces both child handles (one, to be
exact), but also installs a structure (VGPU_DEV) directly on the VirtIo
controller handle, using gEfiCallerIdGuid as protocol GUID. This is a
trick I've seen elsewhere in edk2 (for example, TerminalDxe), and it is
necessary for the following reason:
In EFI_COMPONENT_NAME2_PROTOCOL.GetControllerName(), we must be able to
"cast down" a VirtIo ControllerHandle to our own private data structure
(VGPU_DEV). That's only possible if we install the structure directly on
the VirtIo ControllerHandle (thereby rendering the driver a hybrid
driver), because a child controller with our GOP implementation on it may
not exist / be passed in there.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The GPU additions to VirtIo 1.0 are a work in progress. Mark the relevant
URLs in the source code. Incorporate the absolute minimum from the WIP
spec that is necessary for implementing a GOP driver.
Add the VIRTIO_SUBSYSTEM_GPU_DEVICE macro to
"IndustryStandard/Virtio10.h", since all other such macros (dating back to
VirtIo 0.9.5) are part of "IndustryStandard/Virtio095.h".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This will add virtio-gpu-pci devices to ConOut automatically.
For further benefit, the change also allows OVMF to use the legacy-free /
secondary VGA adapter (added in QEMU commit 63e3e24d, "vga: add secondary
stdvga variant") as console.
ArmVirtPkg's PlatformBootManagerLib already filters with IS_PCI_DISPLAY();
see IsPciDisplay().
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Originally-suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Commit 9399f68ae3 ("OvmfPkg: Virtio10Dxe: non-transitional driver for
virtio-1.0 PCI devices") created a "competition" between Virtio10Dxe and
QemuVideoDxe for virtio-vga devices. The binding order between these
drivers is unspecified, and the wrong order effectively breaks commit
94210dc95e ("OvmfPkg: QemuVideoDxe: add virtio-vga support").
Thus, never bind virtio-vga in Virtio10Dxe; QemuVideoDxe provides better
compatibility for guest OSes that insist on inheriting a linear
framebuffer. Users who prefer the VirtIo GPU interface at boot time should
specify virtio-gpu-pci, which is exactly virtio-vga, minus the VGA
compatibility (such as the framebuffer).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Fixes: 9399f68ae3
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The PCI (Vendor ID, Device ID) pair (0x1af4, 0x1050) stands for both the
virtio-vga and the virtio-gpu-pci device models of QEMU. They differ in
two things:
- the former has a VGA-compatibility linear framebuffer on top of the
latter,
- the former has PCI_CLASS_DISPLAY_VGA device class, while the latter has
PCI_CLASS_DISPLAY_OTHER.
In commit 94210dc95e ("OvmfPkg: QemuVideoDxe: add virtio-vga support"),
we enabled QemuVideoDxe to drive virtio-vga simply by adding its (Vendor
ID, Device ID) pair to gQemuVideoCardList. This change inadvertently
allowed QemuVideoDxe to bind virtio-gpu-pci, which it cannot drive though.
Restrict QemuVideoDxe to PCI_CLASS_DISPLAY_VGA, in order to exclude
virtio-gpu-pci. For the other cards that QemuVideoDxe drives, this makes
no difference. (Note that OvmfPkg's PlatformBootManagerLib instance has
always only added PCI_CLASS_DISPLAY_VGA devices to ConOut; see
DetectAndPreparePlatformPciDevicePath().)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Fixes: 94210dc95e
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
if PcdAcpiS3Enable is disabled, then skip S3 related logic.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
If PcdAcpiS3Enable is disabled, then return an EFI_UNSUPPORTED
error which forces the module to be unloaded.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
The BaseMemoryLibVstm implementation of BaseMemoryLib is ARM only, uses
the NEON register file despite the fact that the UEFI spec does not allow
it, and is currently not used anywhere. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This replaces the various implementations of memset and memcpy,
including the ARM RTABI ones (__aeabi_mem[set|clr]_[|4|8]) with
a single C implementation for each. The ones we have are either not
very sophisticated (ARM), or they are too sophisticated (memcpy() on
AARCH64, which may perform unaligned accesses) or already coded in C
(memset on AArch64).
The Tianocore codebase mandates the explicit use of its SetMem() and
CopyMem() equivalents, of which various implementations exist for use
in different contexts (PEI, DXE). Few compiler generated references to
these functions should remain, and so our implementations in this BASE
library should be small and usable with the MMU off.
So replace them with a simple C implementation that builds correctly
on GCC/AARCH64, CLANG/AARCH64, GCC/ARM, CLANG/ARM and RVCT/ARM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
According to the latest shell spec, in function FindFiles(),
when no files were found, it should return EFI_NOT_FOUND.
But current codes don't follow the spec.
This patch is to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In shell spec, the usage of "Drvcfg" command is: drvcfg [-l XXX] [-c]
[-f <Type>|-v|-s] [DriverHandle [DeviceHandle [ChildHandle]]]
[-i filename] [-o filename]. The parameter number(doesn't include the flags)
cannot exceed 4, now we add this point to check whether using the command
correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
When user uses the command "bcfg driver|boot [dump [-v]]",
the number of command line value parameters (doesn't include the
flag) must be three. We can add this point to check whether using
this command correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
UEFI spec:
Each load option entry resides in a Boot####, Driver####, SysPrep####,
OsRecovery#### or PlatformRecovery#### variable where #### is replaced
by a unique option number in printable hexadecimal representation using
the digits 0-9, and the upper case versions of the characters A-F
(0000-FFFF).
The patch also makes L"HwErrRec####" follow this rule.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Satya Yarlagadda <satya.p.yarlagadda@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Instead of comparing a GUID with gZeroGuid via the CompareGuid API, the
commit uses the IsZeroGuid API to check if the given GUID is a zero GUID.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Instead of comparing a GUID with gZeroGuid via the CompareGuid API, the
commit uses the IsZeroGuid API to check if the given GUID is a zero GUID.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Instead of comparing a GUID with gZeroGuid via the CompareGuid API, the
commit uses the IsZeroGuid API to check if the given GUID is a zero GUID.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Per UEFI spec UpdateImageSize may or may not include Firmware Image
Authentication information. so for FMP auth capsule, UpdateImageSize
should include the Image auth info.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Since we now have EBC support for AArch64, enable it by default
on both QEMU and Xen platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In Exit Boot Services callback function, we cannot use allocate memory services
because it may change the memory map that has been gotten by OS.
This fix is not to allocate reset vector buffer after SaveRestoreFlag is set to
TRUE in MpInitExitBootServicesCallback(). Instead AllocateResetVector() will use
the previous allocated buffer address and save the contents before copying reset
vector code. At the same time, FreeResetVector() will restore original contents
after if SaveRestoreFlag is TRUE.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Just move BackupAndPrepareWakeupBuffer() and RestoreWakeupBuffer() from
PeiMpLib.c to MpLib.c.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
It will be used by DxePeiLib also.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In Exit Boot Services callback function, we cannot use allocate memory services
because it may change the memory map that has been gotten by OS.
This fix is to move allocating reserved memory for AP loop code to
InitMpGlobalData() and save the memory address in one global variable.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
After sending the 1st broadcast INIT-SIPI-SIPI, BSP will collect APs count after
one specified timeout delay. However, WakupAp() will restore reset vector
immediately after sending 1st broadcast INIT-SIPI-SIPI. Some processors may not
complete executing reset vector code.
This fix is to move MicroSecondDelay() from CollectProcessorCount() to the place
that is after sending 1st broadcast INIT-SIPI-SIPI and before FreeResetVector()
in WakupAp().
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This reverts commit c0bcd3433f.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
This reverts commit 0fcf8d4df8.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
This reverts commit 95fc5a8775.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
If a FQDN contains 3 dots '.' like "a.b.c.com", the AsciiStrToIp4
will return success as the HostName has a valid IP address. So we
need to check if it is a decimal character before using AsciiStrDecimalToUintn.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Ruiyu Ni
Laszlo Ersek
Star Zeng
Ard Biesheuvel
Dandan Bi
Zhang, Chao B
Giri P Mudusuru
Hao Wu
Yonghong Zhu
Jiewen Yao
Leif Lindholm
Jeff Brasen
Jeff Fan
Zhang Lubo