Add EjectCpu(), which handles the CPU ejection, and provides a holding
area for said CPUs. It is called via SmmCpuFeaturesRendezvousExit(),
at the tail end of the SMI handling.
Also UnplugCpus() now stashes QEMU Selectors of CPUs which need to be
ejected in CPU_HOT_EJECT_DATA.QemuSelectorMap. This is used by
EjectCpu() to identify CPUs marked for ejection.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Aaron Young <aaron.young@oracle.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Message-Id: <20210312062656.2477515-9-ankur.a.arora@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Call the CPU hot-eject handler if one is installed. The condition for
installation is (PcdCpuMaxLogicalProcessorNumber > 1), and there's
a hot-unplug request.
The handler is called from SmmCpuFeaturesRendezvousExit(), which is
in-turn called at the tail-end of SmiRendezvous() after the BSP has
signalled an SMI exit via the "AllCpusInSync" loop.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Aaron Young <aaron.young@oracle.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Message-Id: <20210312062656.2477515-8-ankur.a.arora@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Init CPU_HOT_EJECT_DATA, which will be used to share CPU ejection
state between SmmCpuFeaturesLib (via PiSmmCpuDxeSmm) and CpuHotPlugSmm.
The init happens via SmmCpuFeaturesSmmRelocationComplete(), and so it
will run as part of the PiSmmCpuDxeSmm entry point function,
PiCpuSmmEntry(). Once inited, CPU_HOT_EJECT_DATA is exposed via
PcdCpuHotEjectDataAddress.
The CPU hot-eject handler (CPU_HOT_EJECT_DATA->Handler) is setup when
there is an ejection request via CpuHotplugSmm.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Aaron Young <aaron.young@oracle.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Message-Id: <20210312062656.2477515-7-ankur.a.arora@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Define CPU_HOT_EJECT_DATA and add PCD PcdCpuHotEjectDataAddress, which
will be used to share CPU ejection state between OvmfPkg/CpuHotPlugSmm
and PiSmmCpuDxeSmm.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Aaron Young <aaron.young@oracle.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Message-Id: <20210312062656.2477515-6-ankur.a.arora@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Introduce UnplugCpus() which maps each APIC ID being unplugged
onto the hardware ID of the processor and informs PiSmmCpuDxeSmm
of removal by calling EFI_SMM_CPU_SERVICE_PROTOCOL.RemoveProcessor().
With this change we handle the first phase of unplug where we collect
the CPUs that need to be unplugged and mark them for removal in SMM
data structures.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Aaron Young <aaron.young@oracle.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210312062656.2477515-5-ankur.a.arora@oracle.com>
Add QemuCpuhpWriteCpuStatus() which will be used to update the QEMU
CPU status register. On error, it hangs in a similar fashion as
other helper functions.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Aaron Young <aaron.young@oracle.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210312062656.2477515-4-ankur.a.arora@oracle.com>
Process fw_remove events in QemuCpuhpCollectApicIds(), and collect APIC IDs
and QEMU CPU Selectors for CPUs being hot-unplugged.
In addition, we now ignore CPUs which only have remove set. These
CPUs haven't been processed by OSPM yet.
This is based on the QEMU hot-unplug protocol documented here:
https://lore.kernel.org/qemu-devel/20201204170939.1815522-3-imammedo@redhat.com/
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Aaron Young <aaron.young@oracle.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Message-Id: <20210312062656.2477515-3-ankur.a.arora@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Refactor CpuHotplugMmi() to pull out the CPU hotplug logic into
ProcessHotAddedCpus(). This is in preparation for supporting CPU
hot-unplug.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Aaron Young <aaron.young@oracle.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210312062656.2477515-2-ankur.a.arora@oracle.com>
EDK2 port of DMTF libredfish project. We clone the necessary files
from open source project libredfish (https://github.com/DMTF/
libredfish) tag v1.0.0 and revise it to incorporate with edk2
firmware code base.
The reason of cloning the necessary files instead of using extern
submodule of libredfish project:
libredfish as a C library which is executed under Windows and
Linux. It could be binded with other programming languages such as
java and python. The library uses curl library as the communication service with Redfish, which is not easy to be abstracted and
replaced with EFI specific protocols (e.g. EFI_REST_EX_PROTOCOL or
payload encode/decode library) and EFI data types. We had the
conversation with DMTF community and they think edk2 is a firmware
solution but not the programming language,
therefore they rejected to have edk2 as a binding to libredfish.
According to above, we decide to clone the necessary files from
libredfish modify it to incorporate with edk2.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Ting Ye <ting.ye@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Fan Wang <fan.wang@intel.com>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3199
When Token points to mSmmStartupThisApToken, this routine is called
from SmmStartupThisAp() in non-blocking mode due to
PcdCpuSmmBlockStartupThisAp == FALSE.
In this case, caller wants to startup AP procedure in non-blocking
mode and cannot get the completion status from the Token because there
is no way to return the Token to caller from SmmStartupThisAp().
Caller needs to use its specific way to query the completion status.
There is no need to allocate a token for such case so the 3 overheads
can be avoided:
1. Call AllocateTokenBuffer() when there is no free token.
2. Get a free token from the token buffer.
3. Call ReleaseToken() in APHandler().
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3218
Adds an INF for StandaloneMmCpuFeaturesLib, which supports building
the SmmCpuFeaturesLib code for Standalone MM. Minimal code changes
are made to allow reuse of existing code for Standalone MM.
The original INF file names are left intact (continue to use SMM
terminology) to retain backward compatibility with platforms that
use those INFs. Similarly, the pre-existing C file names are
unchanged to be consistent with the INF file names.
Note that all references in library source files to PiSmm.h have
been changed to PiMm.h for consistency.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Message-Id: <20210217213227.1277-6-mikuback@linux.microsoft.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3218
Adds a new function called GetCpuMaxLogicalProcessorNumber() to
return the number of maximum CPU logical processors (currently
gUefiCpuPkgTokenSpaceGuid.PcdCpuMaxLogicalProcessorNumber).
This allows the the mechanism used to retrieve the CPU maximum
logical processor number to be abstracted from the logic that
needs the value.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210217213227.1277-5-mikuback@linux.microsoft.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
There's currently two library instances:
1. SmmCpuFeaturesLib
2. SmmCpuFeaturesLibStm
There's two constructor functions:
1. SmmCpuFeaturesLibConstructor()
2. SmmCpuFeaturesLibStmConstructor()
SmmCpuFeaturesLibConstructor() is called by
SmmCpuFeaturesLibStmConstructor() since the functionality in that
function is required by both library instances.
The declaration for SmmCpuFeaturesLibConstructor() is embedded in
"SmmStm.c" instead of being declared in a header file. Further,
that constructor function is called by the STM specific constructor.
This change moves the common code to a function called
CpuFeaturesLibInitialization() which is declared in an internal
library header file "CpuFeaturesLib.h". Each constructor simply
calls this function to perform the common functionality.
Additionally, SmmCpuFeaturesLibConstructor() is moved from
SmmCpuFeaturesLibNoStm.c into a instance-specific file allowing
SmmCpuFeaturesLibNoStm.c to contain no STM implementation agnostic
to a particular library instance.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210217213227.1277-4-mikuback@linux.microsoft.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This change renames SmmCpuFeaturesLib.c to SmmCpuFeaturesLibCommon.c
to better convey that this file contains library implementation
common to all library instances.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Message-Id: <20210217213227.1277-3-mikuback@linux.microsoft.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
FinishSmmCpuFeaturesInitializeProcessor() is a multi-instance
internal library function that is currently not declared in a
header file but embedded in "SmmCpuFeaturesLib.c".
This change cleans up the declaration moving it to a new header
file "CpuFeaturesLib.h" and removing the local declaration in
"SmmCpuFeaturesLib.c".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210217213227.1277-2-mikuback@linux.microsoft.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
[lersek@redhat.com: replace the guard macro "_CPU_FEATURES_LIB_H_" with
"CPU_FEATURES_LIB_H_", for fixing ECC 8003, per commit 6ffbb3581a]
The message "LibGetTime: RtcEpochSeconds non volatile variable was not
found - Using compilation time epoch." can be printed a very large
number of times, causing log files to become excessively large. This is
because the RtcEpochSeconds variable only gets set if LibSetTime is
called, for example by running 'time 12:00' in the UEFI Shell.
Avoid this by setting RtcEpochSeconds to BUILD_EPOCH (EpochSeconds)
after printing the message. It's set to a volatile variable so the
message will be displayed on future boots and not hidden.
Commit 44ae214591 reduced the verbosity of
the message to DEBUG_VERBOSE. Revert it back to DEBUG_INFO so it's more
prominent now that it doesn't get printed so frequently.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Currently the struct parser for StructPcd Generation does not
filter the types such as UINT8 which should be ignored successfully.
This patch modifies this issue.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently StructurePcd.dsc have the list order issue. For a Pcd
with several elements, the list indexs are used to distinguish
these elements like this:
PcdName.name.offset_name[0]|0x0
PcdName.name.offset_name[10]|0x0
PcdName.name.offset_name[11]|0x0
...
PcdName.name.offset_name[2]|0x0
...
However, the index is not strictly sorted by decimal numerical order,
which is not user friendly. One more sort rule for index is added to
the current rules to support for decimal numerical order in this patch.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The Lock is no longer needed since "LOCK XADD" was used in
MpFuncs.nasm for ApIndex atomic increment.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
In Windows environment, "dumpbin /disasm" is used to verify the
disassembly before and after using NASM struc doesn't change.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Update the external dependency (consumed by Edk2Tools) version for NASM,
as agreed in recent community meetings:
https://edk2.groups.io/g/devel/message/71289https://edk2.groups.io/g/devel/message/71070
This is primarily used by CI builds, but may also be used by platforms.
Signed-off-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
This changes added usage of MmUnblockMemoryLib to explicitly request
allocated NVS region to be accessible from MM environment. It will bring
in compatibility with architectures that supports full memory blockage
inside MM.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Qi Zhang <qi1.zhang@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Message-Id: <MWHPR06MB31026F3F8C3FAA39D74CE4BAF3969@MWHPR06MB3102.namprd06.prod.outlook.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=3169
This change added Standalone MM instance of Tcg2. The notify function for
Standalone MM instance is left empty.
A dependency DXE driver with a Depex of gEfiMmCommunication2ProtocolGuid
was created to indicate the readiness of Standalone MM Tcg2 driver.
Lastly, the support of CI build for Tcg2 Standalone MM module is added.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Qi Zhang <qi1.zhang@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Message-Id: <MWHPR06MB3102C3F99CBADFCC5F8A821CF3969@MWHPR06MB3102.namprd06.prod.outlook.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3169
This change separated the original Tcg2Smm module into 2 drivers: the
SMM driver that registers callback for physical presence and memory
clear; the Tcg2Acpi driver that patches and publishes ACPI table for
runtime use.
Tcg2Smm introduced an SMI root handler to allow Tcg2Acpi to communicate
the NVS region used by Tpm.asl and exchange the registered SwSmiValue.
Lastly, Tcg2Smm driver will publish gTcg2MmSwSmiRegisteredGuid at the end
of entrypoint to ensure Tcg2Acpi to load after Tcg2Smm is ready to
communicate.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Qi Zhang <qi1.zhang@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Message-Id: <MWHPR06MB310295CC623EF7C062844DFFF3969@MWHPR06MB3102.namprd06.prod.outlook.com>
This change replaced gSmst with gMmst to support broader compatibility
under MM environment for Tcg2Smm driver.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Qi Zhang <qi1.zhang@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Message-Id: <MWHPR06MB310218F28C7AAF8DB375E963F3969@MWHPR06MB3102.namprd06.prod.outlook.com>
This changes added usage of MmUnblockMemoryLib to explicitly request
runtime cache regions(and its indicators) to be accessible from MM
environment when PcdEnableVariableRuntimeCache is enabled. It will bring
in compatibility with architectures that supports full memory blockage
inside MM.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Message-Id: <MWHPR06MB31026EA41F28F2CE12B68574F3969@MWHPR06MB3102.namprd06.prod.outlook.com>
This change added NULL MmUnblockMemoryLib instance in dsc files of
OvmfPkg to pass CI build. When SMM_REQUIRE flag is set, the library
interface is consumed by VariableSmmRuntimeDxe to better support variable
runtime cache feature.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <MWHPR06MB31028DFAB7AE46E32E5F9F86F3969@MWHPR06MB3102.namprd06.prod.outlook.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3168
This interface provides an abstration layer to allow MM modules to access
requested areas that are outside of MMRAM. On MM model that blocks all
non-MMRAM accesses, areas requested through this API will be mapped or
unblocked for accessibility inside MM environment.
For MM modules that need to access regions outside of MMRAMs, the agents
that set up these regions are responsible for invoking this API in order
for these memory areas to be accessible from inside MM.
Example usages:
1. To enable runtime cache feature for variable service, Variable MM
module will need to access the allocated runtime buffer. Thus the agent
sets up these buffers, VariableSmmRuntimeDxe, will need to invoke this
API to make these regions accessible by Variable MM.
2. For TPM ACPI table to communicate to physical presence handler, the
corresponding NVS region has to be accessible from inside MM. Once the
NVS region are assigned, it needs to be unblocked thourgh this API.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Message-Id: <MWHPR06MB31028AF0D0785B93E4E7CF63F3969@MWHPR06MB3102.namprd06.prod.outlook.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=3217
Current Ufs Pass thru driver polls for 5us and return success even when
the timeout occurs.
There are cards that can take upto 600ms for Init and hence increased
the time out for fDeviceInit polling loop.
Signed-off-by: Bandaru <purna.chandra.rao.bandaru@intel.com>
Cc: Mateusz Albecki <mateusz.albecki@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
In function InitGdt(), SmiPFHandler() and Gen4GPageTable(), it uses
CpuIndex * mSmmStackSize to get the SMM stack address offset for
multi processor. It misses the SMM Shadow Stack Size. Each processor
will use mSmmStackSize + mSmmShadowStackSize in the memory.
It should use CpuIndex * (mSmmStackSize + mSmmShadowStackSize) to get
this SMM stack address offset. If mSmmShadowStackSize > 0 and multi
processor enabled, it will get the wrong offset value.
CET shadow stack feature will set the value of mSmmShadowStackSize.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3237
Signed-off-by: Sheng Wei <w.sheng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Roger Feng <roger.feng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
If CET shadows stack feature enabled in SMM and stack switch is enabled.
When code execute from SMM handler to SMM exception, CPU will check SMM
exception shadow stack token busy bit if it is cleared or not.
If it is set, it will trigger #DF exception.
If it is not set, CPU will set the busy bit when enter SMM exception.
So, the busy bit should be cleared when return back form SMM exception to
SMM handler. Otherwise, keeping busy bit 1 will cause to trigger #DF
exception when enter SMM exception next time.
So, we use instruction SAVEPREVSSP, CLRSSBSY and RSTORSSP to clear the
shadow stack token busy bit before RETF instruction in SMM exception.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3192
Signed-off-by: Sheng Wei <w.sheng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Roger Feng <roger.feng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This is to add instruction SAVEPREVSSP, CLRSSBSY and RSTORSSP_RAX in Nasm.
The open CI is using NASM 2.14.02.
CET instructions are supported since NASM 2.15.01.
DB-encoded CET instructions need to be removed after open CI update to
NASM 2.15.01.
The BZ ticket is https://bugzilla.tianocore.org/show_bug.cgi?id=3227 .
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3192
Signed-off-by: Sheng Wei <w.sheng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The register address of GICR_IPRIORITYR is in SGI_base frame. Add
IPRIORITY_ADDRESS macro for getting GICR_IPRIORITYR address. Otherwise
GIC RAS error(Uncorrected software error) may report in ArmGicDxe.
This resolves BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3236
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/kvm guest on ThunderX2
Tested-by: Quan Nguyen <quan@os.amperecomputing.com>
Modify two macros to put "offset" in parentheses and remove
parentheses from "4 * offset".
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The following patches added support for StandaloneMM using FF-A:
9da5ee116a ArmPkg: Allow FF-A calls to set memory region's attributes
0e43e02b9b ArmPkg: Allow FF-A calls to get memory region's attributes
However, in the error handling logic for the Get/Set Memory attributes,
the CLANG compiler reports that a status variable could be used without
initialisation. This issue is a false positive and is not seen with GCC.
The Get/Set Memory attributes operation is atomic and therefore an
FFA_INTERRUPT or FFA_SUCCESS response is not expected in response
to FFA_MSG_SEND_DIRECT_REQ. So the remaining cases that could occur
are:
- the target sends FFA_MSG_SEND_DIRECT_RESP with a success or
failure code.
or
- FFA_MSG_SEND_DIRECT_REQ transmission failure.
Therefore,
- reorder the error handling conditions such that it prevents the
uninitialised variable issue being flagged by CLANG.
- move the repetitive code to a static helper function and add
documentation at the appropriate places.
- fix error handling in functions that invoke GetMemoryPermissions().
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3235
The library for this header initially resided in StandaloneMmPkg
but moved to MdePkg and now this file is a duplicate of the header
file in MdePkg.
This change removes the header file from StandaloneMmPkg. More
details regarding the history of the library transitioning from
StandaloneMmPkg to MdePkg are below.
The following commit removed the library from StandaloneMmPkg:
d6253d2f9a ("StandaloneMmPkg: remove redundant
StandaloneMmDriverEntryPoint driver", 2019-03-11)
The following commits added the library class & instance to MdePkg:
7df4764e6a ("MdePkg: introduce standalone MM entry point
library class", 2019-01-14)
5866d49923 ("MdePkg: introduce standalone MM entry point
library implementation", 2019-01-14)
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
When AP firstly wakes up, MpFuncs.nasm contains below logic to assign
an unique ApIndex to each AP according to who comes first:
---ASM---
TestLock:
xchg [edi], eax
cmp eax, NotVacantFlag
jz TestLock
mov ecx, esi
add ecx, ApIndexLocation
inc dword [ecx]
mov ebx, [ecx]
Releaselock:
mov eax, VacantFlag
xchg [edi], eax
---ASM END---
"lock inc" cannot be used to increase ApIndex because not only the
global ApIndex should be increased, but also the result should be
stored to a local general purpose register EBX.
This patch learns from the NASM implementation of
InternalSyncIncrement() to use "XADD" instruction which can increase
the global ApIndex and store the original ApIndex to EBX in one
instruction.
With this patch, OVMF when running in a 255 threads QEMU spends about
one second to wakeup all APs. Original implementation needs more than
10 seconds.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The EDK II C Coding Standards Specification states that:
"Names starting with one or two underscores, such as
_MACRO_GUARD_FILE_NAME_H_, must not be used. They are
reserved for compiler implementation." [1]
The Ecc tool currently checks that the include guard end with
a trailing underscore. Thus, the check and the error message
should both be modified.
The new check forces having one sole trailing underscore
character, as the example in the specification shows:
"FILE_NAME_H_" [1]
This would allow to have more consistency.
[1] Section 5.3.5 "All include file contents must be protected
by a #include guard":
https://edk2-docs.gitbook.io/
edk-ii-c-coding-standards-specification/5_source_files/53_include_files
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3135
When Boot Menu does not exist in the BootOrder, BmRegisterBootManagerMenu
will create one into list. However, it should be put at the "end" of
BootOrder instead of "start" of BootOrder. Replace 0 by -1 to adjust
order of load options.
Signed-off-by: Walon Li <walon.li@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
BZ#:3174
Platform library to provide the encoding/decoding algorithms for
the Redfish packets.
The supported value could be one of below or any which is
platform-specific.
- HTTP_CONTENT_ENCODING_IDENTITY "identity"
- HTTP_CONTENT_ENCODING_GZIP "gzip"
- HTTP_CONTENT_ENCODING_COMPRESS "compress"
- HTTP_CONTENT_ENCODING_DEFLATE "deflate"
- HTTP_CONTENT_ENCODING_BROTLI "br"
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
BZ:2911
This is the header file of EDKII Redfish config handler protocol,
which is used by EDKII Redfish feature driver in order to
manipulate Redfish properties based on the Redfish schema.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Fan Wang <fan.wang@intel.com>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Ignore the build error of assignment within conditional expression.
Add build option to ignore the build error of "assignment within
conditional expression".
This build error is caused by the macros defined in open source
project jansson header file jansson.h.
- json_object_foreach
- json_object_foreach_safe
- json_array_foreach
We use build option to avoid the build errors on Visual Studio
(GCC doesn't havvve this problem) for now. Already sent an email
to jansson open source community to revise these macro as Leif's
suggestion as below,
for (key = json_object_iter_key(json_object_iter(object)); \
key; \
key = json_object_iter_key( \
json_object_iter_next(object,
json_object_key_to_iter(key)))) { \
value =
json_object_iter_value(json_object_key_to_iter(key)); \
if (!value) \
break; \
} \
We will remove this build option once the patch is accepted and
upstreamed.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
json_string_value() in JsonValueGetAsciiString () is removed by a accident
when clean up the code.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Add JsonLoadString function to load a NULL terminated-string JSON
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Add more functions which were missed in the first time commit,
that causes the build error with EDK2 Redfish feature driver.
strerror - We don't support this on edk2 environment.
strpbrk - Cloned this function from edk2-LibC
File operation functions - Not supported on edk2 environment.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Allow passing of a request to StandaloneMm Core through the Firmware
Framework(FF-A) using FFA_MSG_SEND_DIRECT_REQ method. This method is
used as a mechanism for requesting some service from StandaloneMm.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Instead of running StMM in SPM, OP-TEE creates a new secure partition,
which emulates SPM and isolates StMM from the rest of the Trusted
Applications (TAs). We can then compile StMM as an FD image and run it
in OP-TEE. With the addition of a new RPMB driver, we can leverage OP-TEE
and store variables to an RPMB device.
Since EDK2 upper layers expect byte addressable code, for the RPMB to
work, we need to allocate memory and sync it with the hardware on
read/writes. Since DynamicPCDs are not supported in that context we
can only use PatchablePCDs. So let's switch them to Pcd instead of
FixedPcd and accomodate the new driver. While at it, move the rest
of the variables under Pcd section, instead of FixedPcd -- this is in
line with how the variables are defined in the other Variable
modules.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Allow setting memory region's permissions using either of the Firmware
Framework(FF-A) ABI transport or through the earlier used SVC calls.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Co-developed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Allow getting memory region's permissions using either of the Firmware
Framework(FF-A) ABI transport or through the earlier used SVC calls.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Co-developed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ankur Arora
Abner Chang
Ray Ni
Michael Kubacki
Rebecca Cran
Yuwei Chen
Bret Barkelew
Kun Qin
Bandaru, Purna Chandra Rao
Sheng Wei
Ming Huang
Sami Mujawar
Pierre Gondois
Li, Walon
Ilias Apalodimas
Achin Gupta