Sets gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache
to FALSE in OvmfPkgIa32.dsc, OvmfPkgIa32X64.dsc, and OvmfPkgX64.dsc
so that when SMM_REQUIRE is TRUE, the SMM variable driver will not
use the runtime variable cache.
This is done for OvmfPkg because it currently depends upon a SMM
variable GetVariable ()implementation as a simple method to exercise
the SMM driver stack. This allows the following commands to be used
for variables such as Boot####, BootOrder, and BootNext to test SMM
timing and stability differences on the BSP (e.g. CPU#0) vs an
AP (e.g. CPU#1).
# taskset -c 0 efibootmgr
# taskset -c 1 efibootmgr
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Currently some tests check the value of SOURCE_DEBUG_ENABLE, and some
tests check if it's defined or not. Additionally, in UefiPayloadPkg as
well as some other trees, we define it as FALSE in the .dsc file.
This patch changes all of the Ovmf platforms to explicitly define it as
FALSE by default, and changes all of the checks to test if the value is
TRUE.
Signed-off-by: Peter Jones <pjones@redhat.com>
Message-Id: <20190920184507.909884-1-pjones@redhat.com>
[lersek@redhat.com: drop Contributed-under line, per TianoCore BZ#1373]
[lersek@redhat.com: replace "!= TRUE" with more idiomatic "== FALSE"]
Cc: Andrew Fish <afish@apple.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2266
Independently of how we decide to address other aspects of the regression
introduced with commit 2de1f611be, it doesn't
make much sense to call for a progress update if PcdPlatformBootTimeOut is
zero.
PcdPlatformBootTimeOut 0, which is the cause of the bug (division by zero)
should be considered to indicate that a platform is not interested in
displaying a progress report, so we alter PlatformBootManagerWaitCallback
to behave that way.
We also change one variable name to make the code more explicit.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20191014150311.16740-2-pete@akeo.ie>
In the following call tree:
PlatformInit ()
mInstalledPackages = HiiAddPackages ()
GopInstalled ()
PopulateForm (PackageList = mInstalledPackages)
CreateResolutionOptions (PackageList)
HiiSetString (PackageList
HiiUpdateForm (PackageList)
PlatformDxe passes around an EFI_HII_HANDLE that (a) originates from
HiiAddPackages() and (b) is ultimately passed to HiiSetString() and
HiiUpdateForm(). The intermediate functions PopulateForm() and
CreateResolutionOptions() however take that parameter as an
(EFI_HII_HANDLE*).
There is no bug in practice (because the affected functions never try to
de-reference the "PackageList" parameter, they just pass it on), but the
function prototypes are semantically wrong. Fix that.
This could remain hidden so long because pointer-to-VOID silently converts
to/from any pointer-to-object type, and the UEFI spec mandates that
EFI_HII_HANDLE be a typedef to (VOID*).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The SignalEvent() boot service takes an EFI_EVENT, not an (EFI_EVENT*).
Fix the call in the notification function of
"EFI_SIMPLE_NETWORK_PROTOCOL.WaitForPacket".
This is an actual bug. The reason it's never been triggered is likely that
the "SNP.WaitForPacket" event is rarely waited for by applications -- edk2
itself has zero instances of that, for example.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Unlike the InstallMultipleProtocolInterfaces() boot service, which takes
an (EFI_HANDLE*) as first parameter, the
UninstallMultipleProtocolInterfaces() boot service takes an EFI_HANDLE as
first parameter.
This is an actual bug. It must have remained hidden until now because it's
on an error path. Fix the UninstallMultipleProtocolInterfaces() call.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Since commit 35e242b698 ("MdePkg/BaseLib: rewrite Base64Decode()",
2019-07-16), Base64Decode() guarantees that DestinationSize is larger on
output than it was on input if RETURN_BUFFER_TOO_SMALL is returned. Clean
up the retval handling for the first Base64Decode() call in
EnrollDefaultKeys, which used to work around the ambiguity in the previous
Base64Decode() interface contract.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1981
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
A Xen PVH guest doesn't have a RTC that OVMF would expect, so
PcatRealTimeClockRuntimeDxe fails to initialize and prevent the
firmware from finish to boot. To prevent that, we will use
XenRealTimeClockLib which simply always return the same time.
This will work on both Xen PVH and HVM guests.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-36-anthony.perard@citrix.com>
Move XenRealTimeClockLib from ArmVirtPkg to OvmfPkg so it can be used
from the OvmfPkg by the following patch, "OvmfPkg/OvmfXen: use
RealTimeClockRuntimeDxe from EmbeddedPkg"
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-35-anthony.perard@citrix.com>
XenIoPvhDxe use XenIoMmioLib to reserve some space to be use by the
Grant Tables.
The call is only done if it is necessary, we simply detect if the
guest is PVH, as in this case there is currently no PCI bus, and no
PCI Xen platform device which would start the XenIoPciDxe and allocate
the space for the Grant Tables.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-34-anthony.perard@citrix.com>
Introduce PcdXenGrantFrames to replace a define in XenBusDxe and allow
the same value to be used in a different module.
The reason for the number of page to be 4 doesn't exist anymore, so
simply remove the comment.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-33-anthony.perard@citrix.com>
On a Xen PVH guest, none of the existing serial or console interface
works, so we add a new one, based on XenConsoleSerialPortLib, and
implemented via SerialDxe.
That is a simple console implementation that can work on both PVH
guest and HVM guests, even if it is rarely going to be used on HVM.
Have PlatformBootManagerLib look for the new console, when running as a
Xen guest.
Since we use VENDOR_UART_DEVICE_PATH, fix its description and coding
style.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-32-anthony.perard@citrix.com>
"OvmfPkg/8254TimerDxe" is replaced with a Xen-specific
EFI_TIMER_ARCH_PROTOCOL implementation. Also remove
8259InterruptControllerDxe as it is not used anymore.
This Timer uses the local APIC timer as time source as it can work on
both a Xen PVH guest and an HVM one.
Based on the "OvmfPkg/8254TimerDxe" implementation.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-31-anthony.perard@citrix.com>
PcdFSBClock is used by SecPeiDxeTimerLibCpu, the TimerLib
implementation. It will also be used by XenTimerDxe. Override
PcdFSBClock to match Xen vLAPIC timer frequency.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-30-anthony.perard@citrix.com>
When running in a Xen PVH guest, there's nothing to do in
PciAcpiInitialization() because there isn't any PCI bus. When the Host
Bridge DID isn't recognised, simply continue. (The value of
PcdOvmfHostBridgePciDevId would be 0 because it isn't set.)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-29-anthony.perard@citrix.com>
Replace the XenDetected() implementation by the one from
XenPlatformLib.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-28-anthony.perard@citrix.com>
We are going to replace XenDetected() implementation in
PlatformBootManagerLib by the one in XenPlatformLib.
PlatformBootManagerLib's implementation does cache the result of
GetFirstGuidHob(), so we do something similar in XenPlatformLib.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-27-anthony.perard@citrix.com>
When the device ID of the host bridge is unknown, check if we are
running as a PVH guest as there is no PCI bus in that case.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-26-anthony.perard@citrix.com>
Linux panic if the VGA region isn't reserved.
When Linux is booted on EFI system, it expects the memory at 0xa0000 to
_not_ be conventional memory. Otherwise a variable isn't initialised
properly and Linux panic when a virtual console/terminal is asked to be
created.
See for more detail:
https://lists.xenproject.org/archives/html/xen-devel/2019-03/msg02139.html
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-25-anthony.perard@citrix.com>
When running as a Xen PVH guest, there is no CMOS to read the memory
size from. Rework GetSystemMemorySize(Below|Above)4gb() so they can
work without CMOS by reading the e820 table.
Rework XenPublishRamRegions to also care for the reserved and ACPI
entry in the e820 table. The region that was added by InitializeXen()
isn't needed as that same entry is in the e820 table provided by
hvmloader.
MTRR settings aren't modified anymore, on HVM it's already done by
hvmloader, on PVH it is supposed to have sane default. MTRR will need
to be done properly but keeping what's already been done by programs
that have run before OVMF will do for now.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-24-anthony.perard@citrix.com>
When the Xen PVH entry point has been used, hvmloader hasn't run and
hasn't prepared an E820 table. The only way left to get an E820 table
is to ask Xen via an hypercall. We keep the result cached to avoid
making a second hypercall which would give the same result.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-23-anthony.perard@citrix.com>
The informations to make a XENMEM_memory_map hypercall is copied over
from the public header of the Xen Project, with the type name modified
to build on OVMF.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-22-anthony.perard@citrix.com>
XenPvhDetected() can be used to figure out if OVMF has started via the
Xen PVH entry point.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-21-anthony.perard@citrix.com>
We are going to need to make an hypercall in order to retreive the E820
table from the hypervisor before been able to setup the memory.
Calling XenConnect earlier will allow to setup the XenHypercallLib
earlier to allow to make hypercalls.
While here, add some comments in XenConnect().
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-20-anthony.perard@citrix.com>
This new XenHvmloaderDetected() return true if the hvmloader firmware
has runned before OVMF.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-19-anthony.perard@citrix.com>
The XenPlatformPei needs to make hypercalls, but the XenHypercallLib was
initialised before the HyperPage was ready. Now that XenPlatformPei has
initialised the HyperPage, reinitialise the XenHypercallLib.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-18-anthony.perard@citrix.com>
Allow to use Xen hypercalls earlier, during the PEIM stage, but
XenHypercallLibInit() must be called once the XenInfo HOB is created
with the HyperPage setup.
Change the return value of XenHypercallLibInit so failure can be
detected when the call shouldn't fail, but still have the constructor
always succeed.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-17-anthony.perard@citrix.com>
If the firmware have been started via the Xen PVH entry point, a RSDP
pointer would have been provided. Use it.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-16-anthony.perard@citrix.com>
This patch replace the XenDetected() function by the one in
XenPlatformLib.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-15-anthony.perard@citrix.com>
The purpose of XenPlatformLib is to regroup the few functions that are
used in several places to detect if Xen is detected, and to get the
XenInfo HOB.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-14-anthony.perard@citrix.com>
Check if there's a start of the day struct provided to PVH guest, save
the ACPI RSDP address for later.
This patch import import arch-x86/hvm/start_info.h from xen.git.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-13-anthony.perard@citrix.com>
Use the already checked pointer mXenHvmloaderInfo to retrieve the E820
table produced by hvmloader.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-12-anthony.perard@citrix.com>
EFI_XEN_OVMF_INFO is only useful to retrieve the E820 table. The
mXenHvmloaderInfo isn't used yet, but will be use in a further patch to
retrieve the E820 table.
Also remove the unused pointer from the XenInfo HOB as that information
is only useful in the XenPlatformPei.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-11-anthony.perard@citrix.com>
The ACPI Timer isn't present in a PVH guest, but local APIC works on
both PVH and HVM.
Note that the use of SecPeiDxeTimerLibCpu might be an issue with a
driver of type DXE_RUNTIME_DRIVER. I've attempted to find out which of
the DXE_RUNTIME_DRIVER uses the TimerLib at runtime. I've done that by
replacing the TimerLib evaluation in
[LibraryClasses.common.DXE_RUNTIME_DRIVER] by a different one and
checking every module that uses it (with the --report-file=report
build option).
ResetSystemRuntimeDxe is calling the TimerLib API at runtime to do the
operation "EfiResetCold", so this may never complete if the OS have
disabled the Local APIC Timer.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-10-anthony.perard@citrix.com>
This patch allows the ResetVector to be run indenpendently from build
time addresses.
The goal of the patch is to avoid having to create RAM just below 4G
when creating a Xen PVH guest while being compatible with the way
hvmloader currently load OVMF, just below 4G.
Only the new PVH entry point will do the calculation.
The ResetVector will figure out its current running address by creating
a temporary stack, make a call and calculate the difference between the
build time address and the address at run time.
This patch copies and make the necessary modification to some other asm
files:
- copy of UefiCpuPkg/.../Flat32ToFlat64.asm:
Allow Transition32FlatTo64Flat to be run from anywhere in memory
- copy of UefiCpuPkg/../SearchForBfvBase.asm:
Add a extra parameter to indicate where to start the search for the
boot firmware volume.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-9-anthony.perard@citrix.com>
As described in the Xen PVH documentation [1], "ebx: contains the
physical memory address where the loader has placed the boot start info
structure". To have this pointer saved to be able to use it later in the
PEI phase, we allocate some space in the MEMFD for it. We use 'XPVH' as
a signature (for "Xen PVH").
[1] https://xenbits.xenproject.org/docs/unstable/misc/pvh.html
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-8-anthony.perard@citrix.com>
Add a new entry point for Xen PVH that enter directly in 32bits.
Information on the expected state of the machine when this entry point
is used can be found at:
https://xenbits.xenproject.org/docs/unstable/misc/pvh.html
Also, compare to the original file [1], the two `nop' of the "resetVector"
entry point are removed. There were introduced by 8332983e2e
("UefiCpuPkg: Replace the un-necessary WBINVD instruction at the reset
vector with two NOPs in VTF0.", 2011-08-04), but don't seems to be
useful. This is the entry point used by HVM guest (hvmloader).
[1] UefiCpuPkg/ResetVector/Vtf0/Ia16/ResetVectorVtf0.asm
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-7-anthony.perard@citrix.com>
This patch changes the flash device image of OvmfXen to make it look
like it's an ELF. For this, we replace the empty embedded variable store
by a binary array, which is a ELF file header.
The ELF header explain to a loader to load the binary at the address
1MB, then jump to the PVH entry point which will be created in a later
patch. The header also includes a Xen ELF note that is part of the
PVH ABI.
That patch include OvmfXenElfHeaderGenerator.c which can be use to
regenerate the ELF header, but this will be a manual step.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-6-anthony.perard@citrix.com>
Introduce XenPlatformPei, a copy of OvmfPkg/PlatformPei without some
of QEMU specific initialization, Xen does not support QemuFwCfg.
This new module will be adjusted to accommodate Xen PVH.
fw_cfg dependents that have been removed, which are dynamically skipped
when running PlatformPei on Xen:
- GetFirstNonAddress(): controlling the 64-bit PCI MMIO aperture via the
(experimental) "opt/ovmf/X-PciMmio64Mb" file
- GetFirstNonAddress(): honoring the hotplug DIMM area
("etc/reserved-memory-end") in the placement of the 64-bit PCI MMIO
aperture
- NoexecDxeInitialization() is removed, so PcdPropertiesTableEnable and
PcdSetNxForStack are left constant FALSE (not set dynamically from
fw_cfg "opt/ovmf/PcdXxxx")
- MaxCpuCountInitialization(), PublishPeiMemory(): the max CPU count is
not taken from the QemuFwCfgItemSmpCpuCount fw_cfg key;
PcdCpuMaxLogicalProcessorNumber is used intact and
PcdCpuApInitTimeOutInMicroSeconds is never changed or used.
- InitializeXenPlatform(), S3Verification(): S3 is assumed disabled (not
consulting "etc/system-states" via QemuFwCfgS3Enabled()).
- InstallFeatureControlCallback(): the feature control MSR is not set
from "etc/msr_feature_control"
(also removed FeatureControl.c as there is nothing been executed)
Also removed:
- SMRAM/TSEG-related low mem size adjusting (PcdSmmSmramRequire is
assumed FALSE) in PublishPeiMemory(),
- QemuInitializeRam() entirely,
Xen related changes:
- Have removed the module variable mXen, as it should be always true.
- Have the platform PEI initialization fails if Xen has not been
detected.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-5-anthony.perard@citrix.com>
Introduce XenResetVector, a copy of OvmfPkg/ResetVector, with one
changes:
- SEC_DEFAULT_CR0: enable cache (bit 30 or CD set to 0)
Xen copies the OVMF code to RAM, there is no need to disable cache.
This new module will later be modified to add a new entry point, more
detail in a following commit "OvmfPkg/XenResetVector: Add new entry point
for Xen PVH"
Value FILE_GUID of XenResetVector have not changed compare to ResetVector
because it is a special value (gEfiFirmwareVolumeTopFileGuid).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-4-anthony.perard@citrix.com>
OvmfXen is a copy of OvmfX64, removing VirtIO and some SMM.
This new platform will be changed to make it works on two types of Xen
guest: HVM and PVH.
Compare to OvmfX64, this patch:
- changed: PLATFORM_GUID, OUTPUT_DIRECTORY, FLASH_DEFINITION
- removed: VirtioLib class resolution
- removed: all UEFI_DRIVER modules for virtio devices
- removed: DXE_SMM_DRIVER and SMM_CORE lib class resolutions
- removed: DXE_SMM_DRIVER and SMM_CORE FDF rules
- removed: Everything related to SMM_REQUIRE==true
- removed: Everything related to SECURE_BOOT_ENABLE==true
- removed: Everything related to TPM2_ENABLE==true
- changed: PcdPciDisableBusEnumeration dynamic default flipped to TRUE
- changed: default FD_SIZE_IN_KB to 2M.
- reverted d272449d9e, "OvmfPkg: raise DXEFV size to 11 MB"
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-3-anthony.perard@citrix.com>
Add missing dependency on PciLib
and remove extra includes of OvmfPlatforms.h.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-2-anthony.perard@citrix.com>
Change referenced MSR name to avoid later build failure.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Specify the firmware to use via the newer '-drive if=pflash' syntax
which allows specifying the raw format parameter. This
avoids warnings with newer version of QEMU.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
$ADD_QEMU_HDA was added because QEMU used to refuse to run without a
disk. Since newer versions run without any disks, remove it.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Enable multithreaded builds by default when building OvmfPkg
using build.sh.
This can drastically reduce build times. For example, on a
modern ThreadRipper system the time required to build decreases
from 3 minutes to 1 minute.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1781
GITHUB: https://github.com/idesai/edk2/tree/enable_sm3_measured_boot_v6
EDK2 Support for SM3 digest algorithm is needed to enable TPM with SM3 PCR
banks. This digest algorithm is part of the China Crypto algorithm suite.
This integration has dependency on the openssl_1_1_1b integration into
edk2.
This patch links SM3 support into Tcg2Pei and Tcg2Dxe.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Imran Desai <imran.desai@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190718225326.40839-5-imran.desai@intel.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Michael Kubacki
Liming Gao
Peter Jones
Pete Batard
Laszlo Ersek
Leif Lindholm
Anthony PERARD
Eric Dong
Rebecca Cran
Imran Desai