If no valid boot options were found, PlatformBootManagerLib refreshes a
set of sane default options and then reboots. However, if there is in
fact no persistent varstore, the same thing happens again on next boot,
and we end up in an endlessly rebooting loop.
So when PcdEmuVariableNvModeEnable is TRUE, skip the reboot step and
enter the setup menu instead.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
One of the side effects of the recent changes to PlatformBootManagerLib
changes to avoid connecting all devices on every boot is that we no
longer default to network boot on a virgin boot, but end up in the
UiApp menu. At this point, the UiApp will instantiate the autogenerated
boot options that we used to rely on as before, but since we are already
sitting idle in the root UiApp menu at that point, it does break the
unattended boot case where devices are expected to attempt a network
boot on the very first power on.
Let's work around this by refreshing all boot options explicitly in
the UnableToBoot() handler, and rebooting the system if doing so
resulted in a change to the total number of configured boot options.
This way, we ultimately end up in the UiApp as before if no boot
options could be started, but only after all the autogenerated ones
have been attempted as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
In order to avoid boot delays from devices such as network controllers
that may not even be involved in booting at all, drop the call to
EfiBootManagerConnectAll () from the boot path. It will be called by
UiApp, so when going through the menu, all devices will be connected
as usual, but for the default boot, it is really not necessary so
let's get rid of this.
Enumerating all possible boot options and creating Boot#### variables
for them is equally unnecessary in the default case, and also happens
automatically in UiApp, so drop that as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Without ConnectAll() being called on the boot path, the UEFI shell will
be entered with no block devices or anything else connected, and so for
the novice user, this is not a very accommodating environment. Now that
we have made the UiApp the last resort on boot failure, and made the
UEFI Shell accessible directly via the 's' hotkey if you really need
it, let's hide it as an ordinary boot option.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
As a last resort, drop into the UiApp application when no active boot
options could be started. Doing so will connect all devices, and so
it will allow the user to enter the Boot Manager submenu and pick a
network or removable disk option.
Note that this only occurs if even the default removable filepath
could not be booted (e.g., \EFI\BOOT\BOOTAA64.EFI on AArch64)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
In preparation of hiding the UEFI Shell boot option as an ordinary
boot option, make sure we can invoke it directly using the 's'
hotkey. Without ConnectAll() having been called, this results in
a shell that may have no block devices or other things connected,
so don't advertise the 's' in the console string that is printed
at boot - for novice users, we will go through the UiApp which
connects everything first. For advanced use, having the ability
to invoke the UEFI shell without any devices connected may be an
advantage, so let's keep this behavior as is for now.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The way the BDS handles the short-form USB device path of the console
keyboard relies on USB host controllers to be locatable via their PCI
metadata, which implies that these controllers already have a PCI I/O
protocol installed on their handle.
This is not the case for non-discoverable USB host controllers that are
supported by the NonDiscoverable PCI device driver. These controllers
must be connected first, or the BDS will never notice their existence,
and will not enable any USB keyboards connected through them.
Let's work around this by connecting these handles explicitly. This is
a bit of a stopgap, but it is the cleanest way of dealing with this
without violating the UEFI driver model entirely. This ensures that
platforms that do not rely on ConnectAll() will keep working as
expected.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In the ArmPkg version of PlatformBootManagerLib, we construct a
serial device path based on the default settings for baud rate,
parity and the number of stop bits, to ensure that a serial console
is available even on the very first boot.
This assumes that PcdUartDefaultParity or PcdUartDefaultStopBits are
not set to '0', meaning 'the default', as there is no default for
these when constructing a device path.
So add a couple of STATIC_ASSERT()s to make sure that we catch this
condition, since it otherwise ignores the bogus device path silently,
which is rather tedious to debug,.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Replace the runtime ASSERT with the build time STATIC_ASSERT on the
check that ensures that the terminal type we use for the serial
console matches the one we explicitly add to the ConIn/ConOut/StdErr
variables.
This helps catch serial console issues early, even in RELEASE builds,
reducing the risk of ending up with no console at all, which can be
tricky to debug on bare metal.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Third party driver images loaded from Option ROM get queued
for execution after EndOfDxe. These queued images need to be
dispatched from the PlatformBootManagerLib.
Since the queued images were not dispatched, the PCI Option
ROM drivers were not getting loaded on Juno. Therefore,
add call to EfiBootManagerDispatchDeferredImages() for
dispatching deferred images from PlatformBootManagerLib.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The BaseTools build feature introduced for TianoCore#1804 / in commit
1fa6699e6c ("BaseTools: Add a checking for Sources section in INF file",
2019-06-10) logs some (non-fatal) warnings about unlisted internal header
files. List those files explicitly.
Note: header files are added in lexicographical order only if the
underlying INF file already keeps the [Sources] and [LibraryClasses]
sections in lexicographical order. Otherwise, header files are added in
rough "logical" order.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
SERIAL_DXE_FILE_GUID is now defined in MdeModulePkg as
EDKII_SERIAL_PORT_LIB_VENDOR_GUID, simply use it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190606131459.1464-4-anthony.perard@citrix.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
ARM platforms have no restriction on when a system firmware update
capsule can be applied, and so it is not necessary to call
ProcessCapsules() twice. So let's drop the first invocation that
occurs before EndOfDxe, and rewrite the second call so that all
capsule updates will be applied when the console is up and able to
provide progress feedback.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add a missing newline to the version string output that is displayed
on the serial console, or the next line will be appended to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
If gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString is set to
a non-empty string, print it to the console at boot. Note that this
is independent of DEBUG/RELEASE or graphical vs serial console,
although we do attempt to stay clear of the logo and progress bar
in graphical mode, by printing it top center.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ESRT hook call that I just added invokes the protocol before
retrieving a pointer to it, which interestingly enough did not
result in any crashes, nor did it get picked up by GCC. Clang did
notice, though, so let's fix it right away.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The ESRT management protocol needs to be invoked at the appropriate times
to get the ESRT config table to be published when the ReadyToBoot event
is signalled. So add this handling to the default ArmPkg implementation
of PlatformBootManagerLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Process any capsule HOBs that were left for us by CapsulePei. This
involves calling ProcessCapsules() twice, as explained in the comment
in DxeCapsuleLibFmp [sic].
1) The first call must be before EndOfDxe. The system capsules is processed.
If device capsule FMP protocols are exposted at this time and device FMP
capsule has zero EmbeddedDriverCount, the device capsules are processed.
Each individual capsule result is recorded in capsule record variable.
System may reset in this function, if reset is required by capsule and
all capsules are processed.
If not all capsules are processed, reset will be defered to second call.
2) The second call must be after EndOfDxe and after ConnectAll, so that all
device capsule FMP protocols are exposed.
The system capsules are skipped. If the device capsules are NOT processed
in first call, they are processed here.
Each individual capsule result is recorded in capsule record variable.
System may reset in this function, if reset is required by capsule
processed in first call and second call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Replace the duplicated and outdated code in QuietBoot.c with a reference
to BootLogoLib, which provides the same functionality. This also allows
us to drop all references to IntelFrameworkModulePkg in this module.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Instead of indirecting the reference to the Shell binary via a PCD
that is defined in IntelFrameworkModulePkg, and which invariably
gets set to the same value by all users of this library, refer to
the UEFI Shell application by its declared symbolic GUID.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This implements the platform glue for the new generic BDS implementation.
It is based on the ArmVirtQemu version, with the QEMU references removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Leif Lindholm
Ard Biesheuvel
Sami Mujawar
Laszlo Ersek
Antoine Cœur
Anthony PERARD
Michael D Kinney
Haojian Zhuang
Ruiyu Ni
Ard Biesheuvel