https://bugzilla.tianocore.org/show_bug.cgi?id=3170
Using PcdHttpIoTimeout to set default timeout value to HttpIoLib.
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: GregX Yeh <gregx.yeh@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
In NOOPT and DEBUG builds, if "PcdMaximumLinkedListLength" is nonzero,
then several LIST_ENTRY *node* APIs in BaseLib compare the *full* list
length against the PCD.
This turns the time complexity of node-level APIs from constant to linear,
and that of full-list manipulations from linear to quadratic.
(See some example OVMF numbers in the previous patch.)
Checking list lengths against an arbitrary maximum -- default value, and
current ArmVirtPkg setting: 1,000,000 -- seems useless even in NOOPT and
DEBUG builds, while the cost is significant; so set the PCD to 0.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Julien Grall <julien@xen.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3152
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Message-Id: <20210113085453.10168-11-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In NOOPT and DEBUG builds, if "PcdMaximumLinkedListLength" is nonzero,
then several LIST_ENTRY *node* APIs in BaseLib compare the *full* list
length against the PCD.
This turns the time complexity of node-level APIs from constant to linear,
and that of full-list manipulations from linear to quadratic.
As an example, consider the EFI_SHELL_FILE_INFO list, which is a data
structure that's widely used in the UEFI shell. I randomly extracted 5000
files from "/usr/include" on my laptop, spanning 1095 subdirectories out
of 1538, and then ran "DIR -R" in the UEFI shell on this tree. These are
the wall-clock times:
PcdMaximumLinkedListLength PcdMaximumLinkedListLength
=1,000,000 =0
-------------------------- ---------------------------
FAT 4 min 31 s 18 s
virtio-fs 5 min 13 s 1 min 33 s
Checking list lengths against an arbitrary maximum (default: 1,000,000)
seems useless even in NOOPT and DEBUG builds, while the cost is
significant; so set the PCD to 0.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3152
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Message-Id: <20210113085453.10168-10-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Introduce the ShellSortFileList() function, for sorting an
EFI_SHELL_FILE_INFO list, by FileName or by FullName.
Duplicates can be kept in the same list, or separated out to a new list.
In either case, the relative order between duplicates does not change (the
sorting is stable).
For the sorting, use OrderedCollectionLib rather than SortLib:
- The PerformQuickSort() function from the latter has quadratic worst-case
time complexity, plus it is implemented recursively (see
"MdeModulePkg/Library/UefiSortLib/UefiSortLib.c"). It can also not
return an error on memory allocation failure.
- In comparison, the Red-Black Tree instance of OrderedCollectionLib sorts
in O(n*log(n)) worst-case time, contains no recursion with the default
PcdValidateOrderedCollection=FALSE setting, and the OrderedCollectionLib
class APIs return errors appropriately.
The OrderedCollectionLib APIs do not permit duplicates natively, but by
using lists as collection entries, stable sorting of duplicates can be
achieved.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3151
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Message-Id: <20210113085453.10168-7-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
A subsequent patch in the series will make the
ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.inf
instance dependent on the OrderedCollectionLib class. Because the shell
binary in this platform consumes the above UefiShellCommandLib instance,
resolve OrderedCollectionLib.
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3151
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210113085453.10168-6-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
A subsequent patch in the series will make the
ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.inf
instance dependent on the OrderedCollectionLib class. Because the shell
binary in this platform consumes the above UefiShellCommandLib instance,
resolve OrderedCollectionLib.
Cc: Andrew Fish <afish@apple.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3151
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210113085453.10168-5-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Some UEFI shell commands read and write files in chunks. The chunk size is
given by "PcdShellFileOperationSize", whose default in
"ShellPkg/ShellPkg.dec" is 4KB (0x1000).
The virtio-fs daemon of QEMU advertizes a 128KB maximum buffer size by
default, for the FUSE_WRITE operation.
By raising PcdShellFileOperationSize 32-fold, the number of FUSE write
requests shrinks proportionately, when writing large files. And when a
Virtio Filesystem is not used, a 128KB chunk size is still not
particularly wasteful.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3125
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Message-Id: <20210113085453.10168-4-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Some UEFI shell commands read and write files in chunks. The chunk size is
given by "PcdShellFileOperationSize", whose default in
"ShellPkg/ShellPkg.dec" is 4KB (0x1000).
The virtio-fs daemon of QEMU advertizes a 128KB maximum buffer size by
default, for the FUSE_WRITE operation.
By raising PcdShellFileOperationSize 32-fold, the number of FUSE write
requests shrinks proportionately, when writing large files. And when a
Virtio Filesystem is not used, a 128KB chunk size is still not
particularly wasteful.
Some ad-hoc measurements on my laptop, using OVMF:
- The time it takes to copy a ~270MB file from a Virtio Filesystem to the
same Virtio Filesystem improves from ~9 seconds to ~1 second.
- The time it takes to compare two identical ~270MB files on the same
Virtio Filesystem improves from ~11 seconds to ~3 seconds.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3125
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Message-Id: <20210113085453.10168-3-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The COMP shell command compares two files byte for byte. In order to
retrieve the bytes to compare, it currently invokes
gEfiShellProtocol->ReadFile() on both files, using a single-byte buffer
every time. This is very inefficient; the underlying
EFI_FILE_PROTOCOL.Read() function may be costly.
Read both file operands in chunks of "PcdShellFileOperationSize" bytes.
Draw bytes for comparison from the internal read-ahead buffers.
Some ad-hoc measurements on my laptop, using OVMF, and the 4KB default of
"PcdShellFileOperationSize":
- When comparing two identical 1MB files that are served by EnhancedFatDxe
on top of VirtioScsiDxe, this patch brings no noticeable improvement;
the comparison completes in <1s both before and after.
- When comparing two identical 1MB files served by VirtioFsDxe, the
comparison time improves from 2 minutes 25 seconds to <1s.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3123
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Message-Id: <20210113085453.10168-2-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We faced a problem with passing through a PCI device with 64GB BAR to UEFI
guest. The BAR is expectedly programmed into 64-bit PCI aperture at 64G
address which pushes physical address space to 37 bits. That is above
36-bit width that OVMF exposes currently to a guest without tweaking
PcdPciMmio64Size knob.
The reverse calculation using this knob was inhereted from QEMU-KVM
platform code where it serves the purpose of finding max accessible
physical address without necessary trusting emulated CPUID physbits value
(that could be different from host physbits). On Xen we expect to use
CPUID policy to level the data correctly to prevent situations with guest
physbits > host physbits e.g. across migrations.
The next aspect raising concern - resource consumption for DXE IPL page
tables and time required to map the whole address space in case of using
CPUID bits directly. That could be mitigated by enabling support for 1G
pages in DXE IPL configuration. 1G pages are available on most CPUs
produced in the last 10 years and those without don't have many phys bits.
Remove all the redundant code now (including PcdPciMmio64.. handling
that's not used on Xen anyway) and grab physbits directly from CPUID that
should be what baremetal UEFI systems do.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Message-Id: <1610509335-23314-1-git-send-email-igor.druzhinin@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Julien Grall <julien@xen.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
[lersek@redhat.com: fix up authorship from groups.io-mangled From line]
[lersek@redhat.com: wrap commit message at 74 characters]
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3105
This new library uses a platform agnostic algorithm to get CPU
cache information. It provides user with an API(GetCpuCacheInfo)
to get detailed CPU cache information by each package, each core
type included in this package, and each cache level & type.
This library can be used by code that produces SMBIOS_TABLE_TYPE7
SMBIOS table.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3105
The UefiCpuPkg/CpuCacheInfoLib will reference new definition
about CPUID_HYBRID_INFORMATION Leaf(1Ah).
Signed-off-by: Jason Lou <yun.lou@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Commit 8015f3f6d4 ("ArmPlatformPkg: Enable support for flash in
64-bit address space") updated the NorFlash DXE and StMM drivers to
take alternate PCDs into account when discovering the base of the
NOR flash regions.
This introduced a disparity between the declarations of the PCD references
in the .INF files, which permits the use of dynamic PCDs, and the code
itself, which now uses FixedPcdGet() accessors. On platforms that actually
use dynamic PCDs, this results in a build error.
So let's clean this up:
- for the DXE version, use the generic PcdGet() accessors, so dynamic PCDs
are permitted
- for the standalone MM version, redeclare the PCDs as [FixedPcd] in the
.INF description, and switch to the FixedPcdGet() accessors.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
I will no longer work for ARM as of next month, and will therefore
lose access to my @arm.com email account. I intend to remain active
in the Tianocore project nonetheless, so let's update my email accounts
to one that is not tied to my current or future employer.
Cc: <ardb+tianocore@kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3149
Address MEM64 BAR in type unknown if sizing fail in high 32bit.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Zarcd Zhong <zarcd.zhong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Platform specific implementation of acquiring credential
to access to Redfish service. This is the platform library
which incorporates with Redfish Credential DXE driver under
Redfish package.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Peter O'Hanley <peter.ohanley@hpe.com>
Acked-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3113
According to FAT specification, the length of file path
should not larger than 260. When the length exceed 260,
function FatLocateOFile will return EFI_INVALID_PARAMETER
and the parameter FileHandle will be NULL. Then on the
top-level function?an exception happens when the NULL
pointer is passed and be used.
So adding return value check after calling
LibGetFileHandleFromMenu, if return value is not success,
stop calling LibFindFiles.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Move HTTP header manipulation functions to DxeHttpLib from
HttpBootSupport.c. These general functions are used by both
Http BOOT and RedfishLib (patches will be sent later).
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Fan Wang <fan.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Peter O'Hanley <peter.ohanley@hpe.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
In the following corner case, the build report
will crash. This patch is to fix this problem.
Case:
Multiple SKU are used and 2 more DynamicHii structure Pcds
are set in dsc file under different SKU. And 1 more of those
Pcds are not used in any INF file.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3138
PcdPcieResizableBarSupport was added in MdeModulePkg.dec, update
UNI file as the documentation of the PCD.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3138
Change default value of PcdPcieResizableBarSupport to FALSE, avoid it
impacts existing platforms.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3084
When DXE drivers are dispatched above 4GB memory in 64bit
mode, the address setCodeSelectorLongJump in stack will
be override by parameter. Jump to Qword is not supported
by some processors. So use "o64 retf" instead.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch fixed the hang in UEFICpuPkg when it is dispatched above 4GB.
In UEFI BIOS case CpuInfoInHob is provided to DXE under 4GB from PEI.
When using UEFI payload and bootloaders, CpuInfoInHob will be allocated
above 4GB since it is not provided from bootloader. so we need update
the code to make sure this hob could be accessed correctly in this case.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch makes two refinements to reduce SMRAM consumption in CpuS3.c.
1. Only do CopyRegisterTable() when register table is not empty,
IsRegisterTableEmpty() is created to check whether the register table
is empty or not.
Take empty PreSmmInitRegisterTable as example, about 24K SMRAM consumption
could be reduced when mAcpiCpuData.NumberOfCpus=1024.
sizeof (CPU_REGISTER_TABLE) = 24
mAcpiCpuData.NumberOfCpus = 1024 = 1K
mAcpiCpuData.NumberOfCpus * sizeof (CPU_REGISTER_TABLE) = 24K
2. Only copy table entries buffer instead of whole buffer.
AllocatedSize in SourceRegisterTableList is the whole buffer size.
Actually, only the table entries buffer needs to be copied, and the size
is TableLength * sizeof (CPU_REGISTER_TABLE_ENTRY).
Take AllocatedSize=0x1000=4096, TableLength=100 and NumberOfCpus=1024 as example,
about 1696K SMRAM consumption could be reduced.
sizeof (CPU_REGISTER_TABLE_ENTRY) = 24
TableLength = 100
TableLength * sizeof (CPU_REGISTER_TABLE_ENTRY) = 2400
AllocatedSize = 0x1000 = 4096
AllocatedSize - TableLength * sizeof (CPU_REGISTER_TABLE_ENTRY) = 4096 - 2400 = 1696
NumberOfCpus = 1024 = 1K
NumberOfCpus * (AllocatedSize - TableLength * sizeof (CPU_REGISTER_TABLE_ENTRY)) = 1696K
This patch also corrects the CopyRegisterTable() function description.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210111015419.28368-1-star.zeng@intel.com>
Neither of the "CPU Socket Unpopulated" or "Do not reboot" messages
should contain the word "Bits".
Remove them and update the identifier for the "Do not reboot" message
to remove the word "BITS".
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The EfiGetVariable() is used in the entry of this module. So, the
variable services are required to be ready before they are used. This
patch adds the arch protocol gEfiVariableArchProtocolGuid to dependency
expression to guarantee that this module will be started once the
variable protocol is available.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Open source project jansson is leveraged by edk2 JsonLib.
Add jansson to the required submodule in CiSettings.py.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Peter O'Hanley <peter.ohanley@hpe.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add EDK2 port jansson library (JsonLib) to RedfishPkg
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Peter O'Hanley <peter.ohanley@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
edk2 JsonLib which is the edk2 port of open source
jansson library.
(https://github.com/akheron/jansson)
jansson library is the open source project to manipulate
JSON data structure.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Peter O'Hanley <peter.ohanley@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Redfish CRT library is currently used by edk2 JsonLib
(open source jansson project) and edk2 RedfishLib
(libredfish open source project). Redfish CrtLib library
provides the necessary C runtime equivalent edk2 functions
for open source projects.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Peter O'Hanley <peter.ohanley@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add git submodule "jansson" library, which is the open
source project (https://github.com/akheron/jansson) used
to manipulate JSON data structure. jansson library is
wrapped as edk2 JsonLib and the use cases will be the
edk2 Redfish feature drivers and edk2 port of libredfish
(https://github.com/DMTF/libredfish).
jansson open source project is under MIT license.
(refer to ReadMe.rst under edk2).
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Peter O'Hanley <peter.ohanley@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
This library provides UCS2 to UFT8 or vise versa functions to
manipulate UCS2/UTF8 strings. This library is currently used
by edk2 port of open source jansson library.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Peter O'Hanley <peter.ohanley@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Commit 55ee36b0c4
("EmbeddedPkg/RealTimeClockRuntimeDxe: Use helper functions from TimeBaseLib")
added a TimeBaseLib dependency to RealTimeClockRuntimeDxe, which now breaks
build of OvmfXen.dsc.
Add a resolution for EmbeddedPkg/Library/TimeBaseLib/TimeBaseLib.inf.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Commit 55ee36b0c4
("EmbeddedPkg/RealTimeClockRuntimeDxe: Use helper functions from TimeBaseLib")
added a TimeBaseLib dependency to RealTimeClockRuntimeDxe, which now breaks
build of EmbeddedPkg.dsc.
Add a resolution for EmbeddedPkg/Library/TimeBaseLib/TimeBaseLib.inf.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Nhi Pham <nhi@os.amperecomputing.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Use the correct type in the sizeof() expression to calculate the size
of the newly allocated EFI_HOB_MEMORY_POOL hob.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=3139
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Bugzilla: 3048 (https://bugzilla.tianocore.org/show_bug.cgi?id=3048)
Add a new parser for the Arm Error Source Table (AEST) described in
the ACPI for the Armv8 RAS Extensions 1.1 Platform Design Document,
dated 28 September 2020.
(https://developer.arm.com/documentation/den0085/0101/)
AEST enables kernel-first handling of errors in a system that supports
the Armv8 RAS extensions. It covers Armv8.2+ RAS extensions for PEs
and the RAS system architecture for non-PE system components.
Signed-off-by: Marc Moisson-Franckhauser <marc.moisson-franckhauser@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Bugzilla: 3049 (https://bugzilla.tianocore.org/show_bug.cgi?id=3049)
Add definition for the Arm Error Source Table (AEST) described in
the ACPI for the Armv8 RAS Extensions 1.1 Platform Design Document,
dated 28 September 2020.
(https://developer.arm.com/documentation/den0085/0101/)
Signed-off-by: Marc Moisson-Franckhauser <marc.moisson-franckhauser@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
When SEV-ES is active, and MMIO operation will trigger a #VC and the
VmgExitLib exception handler will process this MMIO operation.
A malicious hypervisor could try to extract information from encrypted
memory by setting a reserved bit in the guests nested page tables for
a non-MMIO area. This can result in the encrypted data being copied into
the GHCB shared buffer area and accessed by the hypervisor.
Prevent this by ensuring that the MMIO source/destination is un-encrypted
memory. For the APIC register space, access is allowed in general.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <0cf28470ad5e694af45f7f0b35296628f819567d.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
Protect the GHCB backup pages used by an SEV-ES guest when S3 is
supported.
Regarding the lifecycle of the GHCB backup pages:
PcdOvmfSecGhcbBackupBase
(a) when and how it is initialized after first boot of the VM
If SEV-ES is enabled, the GHCB backup pages are initialized when a
nested #VC is received during the SEC phase
[OvmfPkg/Library/VmgExitLib/SecVmgExitVcHandler.c].
(b) how it is protected from memory allocations during DXE
If S3 and SEV-ES are enabled, then InitializeRamRegions()
[OvmfPkg/PlatformPei/MemDetect.c] protects the ranges with an AcpiNVS
memory allocation HOB, in PEI.
If S3 is disabled, then these ranges are not protected. PEI switches to
the GHCB backup pages in permanent PEI memory and DXE will use these
PEI GHCB backup pages, so we don't have to preserve
PcdOvmfSecGhcbBackupBase.
(c) how it is protected from the OS
If S3 is enabled, then (b) reserves it from the OS too.
If S3 is disabled, then the range needs no protection.
(d) how it is accessed on the S3 resume path
It is rewritten same as in (a), which is fine because (b) reserved it.
(e) how it is accessed on the warm reset path
It is rewritten same as in (a).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <119102a3d14caa70d81aee334a2e0f3f925e1a60.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
In order to be able to issue messages or make interface calls that cause
another #VC (e.g. GetLocalApicBaseAddress () issues RDMSR), add support
for nested #VCs.
In order to support nested #VCs, GHCB backup pages are required. If a #VC
is received while currently processing a #VC, a backup of the current GHCB
content is made. This allows the #VC handler to continue processing the
new #VC. Upon completion of the new #VC, the GHCB is restored from the
backup page. The #VC recursion level is tracked in the per-vCPU variable
area.
Support is added to handle up to one nested #VC (or two #VCs total). If
a second nested #VC is encountered, an ASSERT will be issued and the vCPU
will enter CpuDeadLoop ().
For SEC, the GHCB backup pages are reserved in the OvmfPkgX64.fdf memory
layout, with two new fixed PCDs to provide the address and size of the
backup area.
For PEI/DXE, the GHCB backup pages are allocated as boot services pages
using the memory allocation library.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <ac2e8203fc41a351b43f60d68bdad6b57c4fb106.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
Update the MemEncryptSevLib library to include an interface that can
report the encryption state on a range of memory. The values will
represent the range as being unencrypted, encrypted, a mix of unencrypted
and encrypted, and error (e.g. ranges that aren't mapped).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <0d98f4d42a2b67310c29bac7bcdcf1eda6835847.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
In preparation for a new interface to be added to the MemEncryptSevLib
library that will be used in SEC, create an SEC version of the library.
This requires the creation of SEC specific files.
Some of the current MemEncryptSevLib functions perform memory allocations
which cannot be performed in SEC, so these interfaces will return an error
during SEC. Also, the current MemEncryptSevLib library uses some static
variables to optimize access to variables, which cannot be used in SEC.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <bc7fa76cc23784ab3f37356b6c10dfec61942c38.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
Creating an SEC version of the library requires renaming an existing file
which will result in the existing code failing ECC. Prior to renaming the
existing file, fix the coding style to avoid the ECC failure.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <f765d867da4a703e0a0db35e26515a911482fd40.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
Check the DR7 cached indicator against a specific value. This makes it
harder for a hypervisor to just write random data into that field in an
attempt to use an invalid DR7 value.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <65157c1155a9c058c43678400dfc0b486e327a3e.1610045305.git.thomas.lendacky@amd.com>
Jiahui Cen via groups.io
GregX Yeh
Laszlo Ersek
Igor Druzhinin
Lou, Yun
Ard Biesheuvel
Zarcd Zhong
Abner Chang
wenyi,xie via groups.io
Bob Feng
Luo, Heng
Guo Dong
Zeng, Star
Rebecca Cran
Nhi Pham
Leif Lindholm
Liu, WeiX C
Marc Moisson-Franckhauser
Tom Lendacky