If given address is on 64K boundary and the requested bit number is 64,
all SetBits(), ClearBits() and GetBits() will encounter ASSERT problem
in trying to do a 64 bits of shift, which is not allowed by LShift() and
RShift(). This patch tries to fix this issue by turning bits operation
into whole integer operation in such situation.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Due to the fact that HeapGuard needs CpuArchProtocol to update page
attributes, the feature is normally enabled after CpuArchProtocol is
installed. Since there're some drivers are loaded before CpuArchProtocl,
they cannot make use HeapGuard feature to detect potential issues.
This patch fixes above situation by updating the DXE core to skip the
NULL check against global gCpu in the IsMemoryTypeToGuard(), and adding
NULL check against gCpu in SetGuardPage() and UnsetGuardPage() to make
sure that they can be called but do nothing. This will allow HeapGuard to
record all guarded memory without setting the related Guard pages to not-
present.
Once the CpuArchProtocol is installed, a protocol notify will be called
to complete the work of setting Guard pages to not-present.
Please note that above changes will cause a #PF in GCD code during cleanup
of map entries, which is initiated by CpuDxe driver to update real mtrr
and paging attributes back to GCD. During that time, CpuDxe doesn't allow
GCD to update memory attributes and then any Guard page cannot be unset.
As a result, this will prevent Guarded memory from freeing during memory
map cleanup.
The solution is to avoid allocating guarded memory as memory map entries
in GCD code. It's done by setting global mOnGuarding to TRUE before memory
allocation and setting it back to FALSE afterwards in GCD function
CoreAllocateGcdMapEntry().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This change is to avoid the function conflict.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to UEFI spec 2.7, PciIo->GetBarAttributes should return host
address (CPU view ddress) rather than device address (PCI view
address), and
device address = host address + address translation offset,
so we subtract translation from device address before returning.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to UEFI spec 2.7, PciRootBridgeIo->Configuration() should
return host address (CPU view ddress) rather than device address
(PCI view address), so in function GetMmioAddressTranslationOffset we
need to convert the range to device address before comparing.
And device address = host address + translation offset.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PCI address translation is necessary for some non-x86 platforms. On
such platforms, address value (denoted as "device address" or "address
in PCI view") set to PCI BAR registers in configuration space might be
different from the address which is used by CPU to access the
registers in memory BAR or IO BAR spaces (denoted as "host address" or
"address in CPU view"). The difference between the two addresses is
called "Address Translation Offset" or simply "translation", and can
be represented by "Address Translation Offset" in ACPI QWORD Address
Space Descriptor (Offset 0x1E). However UEFI and ACPI differs on the
definitions of QWORD Address Space Descriptor, and we will follow UEFI
definition on UEFI protocols, such as PCI root bridge IO protocol and
PCI IO protocol. In UEFI 2.7, "Address Translation Offset" is "Offset
to apply to the Starting address to convert it to a PCI address". This
means:
1. Translation = device address - host address.
2. PciRootBridgeIo->Configuration should return CPU view address, as
well as PciIo->GetBarAttributes.
Summary of addresses used in protocol interfaces and internal
implementations:
1. *Only* the following protocol interfaces assume Address is Device
Address:
(1). PciHostBridgeResourceAllocation.GetProposedResources()
Otherwise PCI bus driver cannot set correct address into PCI
BARs.
(2). PciRootBridgeIo.Mem.Read() and PciRootBridgeIo.Mem.Write()
(3). PciRootBridgeIo.CopyMem()
UEFI and PI spec have clear statements for all other protocol
interfaces about the address type.
2. Library interfaces and internal implementation:
(1). Base and Limit in PCI_ROOT_BRIDGE_APERTURE are device address.
It is easy to check whether the address is below 4G or above 4G.
(2). Addresses in PCI_ROOT_BRIDGE_INSTANCE.ResAllocNode are host
address, for they are allocated from GCD.
(3). Address passed to PciHostBridgeResourceConflict is host address,
for it comes from PCI_ROOT_BRIDGE_INSTANCE.ResAllocNode.
RESTRICTION: to simplify the situation, we require the alignment of
Translation must be larger than any BAR alignment in the same root
bridge, so that resource allocation alignment can be applied to both
device address and host address.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add Translation field to PCI_ROOT_BRIDGE_APERTURE. Translation is used
to represent the difference between device address and host address,
if they are not the same on some platforms.
In UEFI 2.7, "Address Translation Offset" is "Offset to apply to the
Starting address to convert it to a PCI address". This means:
Translation = device address - host address
So we also use the above calculation for this Translation field to
keep consistent.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch fixes the same issues in Heap Guard in DXE core, which is fixed
in another patch.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
There're two ASSERT issues which will be triggered by boot loader of
Windows 10.
The first is caused by allocating memory in heap guard during another
memory allocation, which is not allowed in DXE core. Avoiding reentry
of memory allocation has been considered in heap guard feature. But
there's a hole in the code of function FindGuardedMemoryMap(). The fix
is adding AllocMapUnit parameter in the condition of while(), which
will prevent memory allocation from happenning during Guard page
check operation.
The second is caused by the core trying to allocate page 0 with Guard
page, which will cause the start address rolling back to the end of
supported system address. According to the requirement of heap guard,
the fix is just simply skipping the free memory at page 0 and let
the core continue searching free memory after it.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Remove PCD_TYPE_SKU_ENABLED in PCD_TYPE_ALL_SET.
This change was missing at e8d2a98052.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Thomas Lamprecht <t.lamprecht@proxmox.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The incorrect return status was caused by the commit of 39b0867d, which
was to resolve the token status error that does not compliance with spec
definition, but it results the protocol status not compliance with spec
definition.
This patch is to resolve above issue.
Cc: Wang Fan <fan.wang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wang, Fan <fan.wang@intel.com>
PcdDb optimization has handled PCD DB for each SKU, not for single PCD.
So, this PCD attribute is not used any more.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
With this flag, the LockBox can be restored in S3 resume only.
The LockBox can not be restored after SmmReadyToLock in normal boot
and after EndOfS3Resume in S3 resume.
It can not be set together with LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The root cause is an unnecessary check to Size parameter in function
AdjustMemoryS(). It will cause one standalone free page (happen to have
Guard page around) in the free memory list cannot be allocated, even if
the requested memory size is less than a page.
//
// At least one more page needed for Guard page.
//
if (Size < (SizeRequested + EFI_PAGES_TO_SIZE (1))) {
return 0;
}
The following code in the same function actually covers above check
implicitly. So the fix is simply removing above check.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The example of UNION storage is not good, now update it.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If enabled, NX memory protection feature will mark some types of active
memory as NX (non-executable), which includes the first page of the stack.
This will overwrite the attributes of the first page of the stack if the
stack guard feature is also enabled.
The solution is to override the attributes setting to the first page of
the stack by adding back the 'EFI_MEMORY_RP' attribute when the stack
guard feature is enabled.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The commit rewrites the logic in function
InitializeDxeNxMemoryProtectionPolicy() for handling the first page
(page 0) when NULL pointer detection feature is enabled.
Instead of skip setting the page 0, the codes will now override the
attribute setting of page 0 by adding the 'EFI_MEMORY_RP' attribute.
The purpose is to make it easy for other special handling of pages
(e.g. the first page of the stack when stack guard feature is enabled).
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Function BmRepairAllControllers may recursively call itself if some
driver health protocol returns EfiDriverHealthStatusReconnectRequired.
However, driver health protocol of some buggy third party driver may
always return such status even after one and another reconnect. The
endless iteration will cause stack overflow and then system exception,
and it may be not easy to find that the exception is actually caused
by stack overflow.
So we limit the number of reconnect retry to 10 to improve code
robustness, and DEBUG_CODE is moved ahead before recursive repair to
track the repair result.
We also remove a duplicated declaration of BmRepairAllControllers() in
InternalBm.h in this patch, for it is only a trivial change.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
CompatibleRangeTest() contains two bugs:
1. It doesn't reject the memory above 16MB
2. it cannot handle the case when the partial or whole range of
requested memory is already tested.
The patch fixes the two bugs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch should not impact the functionality.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Because terminal doesn't support shift and toggle key state,
ReadKeyStrokeEx just sets the two states to 0.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Current BLOCK IO API code is using TPL_CALLBACK,
but comment is saying TPL_NOTIFY.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
When a USB device reports failure for a CMD and REQUEST SENSE returns
Media Changed key, UsbBootExecCmdWithRetry() stops to retry CMD and
returns EFI_MEDIA_CHANGED to caller.
For this case, the CMD should be retried until success, getting
NoMedia sense key or timeout.
The patch updates UsbBootExecCmdWithRetry() to follow the above
rule so EFI_MEDIA_CHANGED is no longer returned.
UsbBootDetectMedia() is updated accordingly.
Because UsbBootGetParams() is called for new plugged USB storage,
and some USB storage devices may report Media Changed key,
UsbBootGetParams() is updated to treat it as a Success.
This change could fix the issue that some USB storage devices
cannot be detected.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This reverts commit a662afb5b0.
* MdeModulePkg/UsbStorage: Fix "map -r" cannot detect media change
The above commit fixed the following issue:
When system boots to Shell without CDROM inside USB CDROM drive,
and then user inserts the CDROM with Eltorito file system,
"map -r" cannot show the new ELtorito file system.
The commit caused EFI_MEDIA_CHANGED status returned from
UsbBootDetectMedia().
But that fix exposes another issue:
When issuing ReadCapacity command to certain USB key
(Kingston DataTraveler G3 8GB) after it's hot-plugged, USB device
returns STALL error and RequestSense command returns media changed
sense data. (Most of the USB keys return SUCCESS for ReadCapacity
command after hot-plug.)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This reverts commit 6461344c31.
* MdeModulePkg/UsbMass: Fix hot-plug USB CDROM can't be recognized
UsbBootExecCmd() only calls UsbBootRequestSense() to get sense key
when CMD fails.
When POWER ON (29h) ASC returns from REQUEST SENSE, implementation
should retry the CMD, instead of treating this as a SUCCESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add gEdkiiS3SmmInitDoneGuid, after S3 SMM initialization is done and
before S3 boot script is executed, this GUID is installed as PPI in
PEI and protocol in SMM environment. It allows for PEIMs or SMM
drivers to hook this point and do the required tasks.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
TPL deadlock issue was enrolled by the commit of 39b0867d. To resolve the issue,
this patch separated the timer ticking for all the MTFTP clients to calculate the
packet live time in TPL_NOTIFY level.
Cc: Wang Fan <fan.wang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The default value of PcdExtFpdtBootRecordPadSize is 0x20000
But the following commit in master update it to 0 by mistake.
SHA-1: 052c98ce24
Subject: MdeModulePkg: Add ResetSystemPei PEIM
This patch is to restore the value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Currently DxeCorePerformanceLib will get SMM performance data based
on SMM communication handler. If SMM communication handler returns error,
the library will ASSERT. In fact, if SMM perf data is not found.
DXE perf data can still be dumped. So using status check instead of
ASSERT is better.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The previous commit 137ed15511
* MdeModulePkg/DebugLib: Print partial when format string is too long
copies partial format string to DEBUG_INFO buffer but when parsing
the format modifier, the original format string is still used.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=799
Based on content from the following branch/commit:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport33bab4031a
Add check to see if the Boot Logo 2 Protocol is available
and attempt to set the location and size of the boot logo
using both the Boot Logo Protocol and the Boot Logo 2
Protocol.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=799
Based on content from the following branch/commit:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport33bab4031a
Update BootGraphicsResourceDxe to produce both the Boot Logo
Protocol and the Boot Logo 2 Protocol.
The Boot Logo 2 Protocol service GetBootLogo() is amended
to return the pointer to the GOP BLT buffer previously
registered with the SetBootLogo() service.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=799
Based on content from the following branch/commit:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport33bab4031a
Add new Boot Logo 2 Protocol that adds a GetBootLogo()
service that can be used to retrieve the GOP BLT buffer,
location, and size of the boot logo that was previously
registered with the SetBootLogo() service.
The Boot Logo 2 Protocol service GetBootLogo() is amended
to return the pointer to the GOP BLT buffer previously
registered with the SetBootLogo() service.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=650
Today's implementation converts the untested more reliable memory
from reserved GCD type to system memory GCD type.
Though it doesn't impact the return result of gBS->GetMemoryMap().
But it impacts the return result of gDS->GetMemorySpaceDescriptor().
The patch fixes the bug to convert the untested more reliable memory
from reserved GCD type to more reliable memory GCD type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=650
Today's implementation converts the untested more reliable memory
from reserved GCD type to system memory GCD type.
Though it doesn't impact the return result of gBS->GetMemoryMap().
But it impacts the return result of gDS->GetMemorySpaceDescriptor().
The patch fixes the bug to convert the untested more reliable memory
from reserved GCD type to more reliable memory GCD type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The updated Length value should be returned
for EFI_BUFFER_TOO_SMALL case.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
If PEIM image address doesn't meet with its section alignment, it will
load fail. PeiCore adds more debug message to report it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The commit places the check for MediaId at the beginning of Block IO
services:
RamDiskBlkIoReadBlocks and
RamDiskBlkIoWriteBlocks
This aligns with the Block IO protocol implementations for other
devices.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Use UefiMultiPhase.h in Vfr.vfr instead of duplicating EFI_VARIABLE_*
definitions.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In below calling stack:
UsbBootIsUnitReady()
UsbBootExecCmdWithRetry()
UsbBootExecCmd()
UsbBootRequestSense()
When USB CDROM is hot-plugged, UsbBootRequestSense() retrieves sense
key (6 = UnitAttention), additional sense code (29h = Power ON).
But it wrongly maps such sense data to Device Error status.
It causes UsbBootExecCmd() executed again.
In the second time call to UsbBootExecCmd(), UsbBootRequestSense()
retrieves sense key (6 = UnitAttention), additional sense code
(28h = media changed).
The above analysis explains why hot-plug USB CDROM cannot be
recognized after below commit:
SHA1 a662afb5b0
* MdeModulePkg/UsbStorage: Fix "map -r" cannot detect media change,
which removes the media changed status check in UsbBootDetectMedia().
The proper fix to this problem is to map the ASC (additional sense
code 29h) properly to success status so that no second call to
UsbBootExecCmd() is made.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Since the pointer subtraction here is not performed by pointers to
elements of the same array object. This might lead to potential issues,
such behavior is undefined according to C11 standard.
Refine the pointer subtraction expressions by casting each pointer to
UINTN first and then perform the subtraction.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In commit 3a039a567a ("MdeModulePkg/UefiBootManagerLib: Remove the
useless perf codes", 2018-02-12), the BmWriteBootToOsPerformanceData()
function was removed. No TimerLib API calls are left, thus remove the
TimerLib class dependency from "InternalBm.h" and "UefiBootManagerLib.inf"
as well.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Remove the definitions related to old perf codes.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2: Just update the commit message to reference the hash value of
new performance infrastructure.
Our new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b) can support to
dump performance date form ACPI table in OS. So we can remove
the old perf code to write performance data to OS.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2: Just update the commit message to reference the hash value of
new performance infrastructure.
Our new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b) can support to
dump performance date form ACPI table in OS. So we can remove
the old perf code to write performance data to OS.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=873
Update IsNestedFmpCapsule() to verify the CapsuleGuid in
the CapsuleHeader against the installed Firmware Management
Protocol instances. The current logic that uses the ESRT
Table does not work because capsules are processed before
the ESRT Table is published at the Ready To Boot event.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=800
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport33bab4031aca516b1a612b9f111f2e
Use BmpSupportLib to convert a GOP BLT Buffer to the BMP graphics
image that is published in an ACPI BGRT table.
* Remove use of IndustryStandard/Bmp.h include file
* Remove mBmpImageHeaderTemplate. This is handled by BmpSupportLib
* Clean up code style with function prototypes at top
and all module global variables together
* Update SetBootLogo() to use SafeIntLib to check input parameters
for overflows.
* Remove internal function BgrtAcpiTableChecksum(). Use
CalculateCheckSum8() directly from BgrtReadyToBootEventNotify()
* Remove InstallBootGraphicsResourceTable(). Move all the code into
BgrtReadyToBootEventNotify() that is signaled at ready to boot.
* Remove all logic that converts a GOP BLT buffer to a BMP graphics image
and use BmpSupportLib function TranslateGopBltToBmp() instead.
* Use AllocatePool() instead of AllocatePages() to allocate copy of
BMP image that is provided by BGRT. This is required to be compatible
with BmpSupportLib function TranslateGopBltToBmp() that uses
AllocatePool().
* Zero OemId in BGRT header before filling in value from PCD.
* Get size of PcdAcpiDefaultOemId and only copy the the size of the PCD
if it is smaller than the size of the OemId field in the BGRT header.
* Use WriteUnaligned24() instead of CopyMem() for the OemTableId field
of the BGRT header.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=800
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport33bab4031aca516b1a612b9f111f2e
Use BmpSupportLib to convert a BMP graphics image to a
GOP BLT buffer.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=800
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport33bab4031aca516b1a612b9f111f2e
Add BmpSupportLib class and instances that provides services to
convert a BMP graphics image to a GOP BLT buffer and to convert
a GOP BLT buffer to a BMP graphics image.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=802
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport
The EsrtFmpDxe module is a lightweight version of the EsrtDxe
module that produces ESRT entries based only on FMP Protocol
instances.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
"Token" is passed through the perf entry, it's may be NULL.
So we need to add NULL pointer check before reference it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For a structure with a series of bit fields and used as a storage
in vfr file, and if the bit fields do not add up to the size of
the defined type.In the C code use sizeof() to get size of the
structure, the results may vary form the compiler(VS,GCC...).
But the size of the storage calculated by VfrCompiler is fixed
(calculate with alignment).To avoid the issue cased by above case,
we need to make the total width of the bit fields in the structure
aligned with the size of the defined type for these bit fields.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The Reset Notification protocol is added in UEFI spec to support
reset notification mechanism in the DXE phase.
This patch adds similar EDKII specific Reset Notification PPI to PEI
phase to provide the same support.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
This driver implements Reset2, ResetFilter and ResetHandler PPIs.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
The library class that provides services to generate a GUID specific
reset, parse the GUID from a GUID specific reset, and build the
ResetData buffer for any type of reset that requires extra data.
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add a PEI instance of ResetSystemLib that calls the ResetSystem2()
service in the PEI Services Table.
Add a DXE instance of ResetSystemLib that calls the ResetSystem()
service in the UEFI Runtime Services Table.
These 2 library instances should be the default ResetSystemLib
mapping for most PEIMs and DXE drivers so all reset system requests
go through the core service.
Only the implementation of the core servies should use the
platform specific instance of the ResetSystemLib that actually
performs the hardware actions to reset the platform.
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
The patch adds more debug message in ResetSystem().
It also removes unnecessary check of mResetNotifyDepth.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add support for platform specific reset filters and platform
specific reset handlers to ResetSystem(). A filter may modify
the reset type and reset data and call ResetSystem() with the
modified parameters. A handler performs the reset action.
The support for platform specific filters and platform specific
handlers is based on the Reset Notification feature added to the
UEFI 2.7 Specification.
Platform specific reset filters are processed first so the final
reset type and reset data can be determined. In the DXE Phase
The UEFI Reset Notifications are processed second so all UEFI
Drivers that have registered for a Reset Notification can perform
any required clean up actions. The platform specific reset
handlers are processed third. If there are no registered
platform specific reset handlers or none of them reset the
platform, then the default reset action based on the
ResetSystemLib is performed.
In the PEI Phase, filters and handlers are registered through
the following 2 PPIs that are based on
EFI_RESET_NOTIFICATION_PROTOCOL.
* gEdkiiPlatformSpecificResetFilterPpiGuid
* gEdkiiPlatformSpecificResetHandlerPpiGuid
In the DXE Phase, filters and handlers are registered through
the following 2 Protocols that are based on
EFI_RESET_NOTIFICATION_PROTOCOL.
* gEdkiiPlatformSpecificResetFilterProtocolGuid
* gEdkiiPlatformSpecificResetHandlerProtocolGuid
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Update PEI Service ResetSystem() to always attempt to use
the Reset2 PPI before looking for the Reset PPI.
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V3:
a. Remove unused definitions
b. Get records size form the records buffer when getting size action
is triggered.
V2:
Update FirmwarePerformanceSmm to receive the address
of performance records instead of records content.
Receive buffer address of Boot performance records
which are reported by SmmCorePerformanceLib.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V4:
Update the GUID for status code in DxeCorePerformanceLib and
FirmwarePerformanceDxe.
V3:Add handling for the case when performance feature is not enabled.
V2:
Update FirmwarePerformanceDxe to receive the address
of performance records instead of records content.
1. Remove the macro EXTENSION_RECORD_SIZE, since the extension
size can be got through PcdExtFpdtBootRecordPadSize.
2. Hook EFI_SW_DXE_BS_PC_READY_TO_BOOT_EVENT to install ACPI table
3. Copy SMM record accord to the allocated size
4. Receive Boot performance table address instead of
contents which are reported DxeCorePerformanceLib.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V3:
a. Handle the case when string is empty in String Record.
b. Use gEdkiiFpdtExtendedFirmwarePerformanceGuid to report status
code.
c. Refine the code logic.
V2:
Update SmmCorePerformanceLib to report the buffer address of
boot performance records instead of records contents.
Updated to convert Pref entry to FPDT record in SMM phase and then
export records to FPDT table.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V4:
a.Update the GUID for status code in DxeCorePerformanceLib and
FirmwarePerformanceDxe.
b. Add check for Insert FPDT record in DxeCorePerformanceLib
to avoid re-entry case.
V3:
a. Handle the case when string is empty in String Record.
b. refine the code logic.
V2:
Update DxecorePerformanceLib to report the boot performance table
address instead of records contents.
Updated to convert Pref entry to FPDT record in DXE phase and then
allocate boot performance table to save the record and report
the address of boot performance table to FirmwarePerformanceDxe.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V3:Handle the case when string is empty in String Record.
Updated to convert Pref entry to FPDT record in PEI phase and then
report the records to DxeCorePerfLib through GUID hob.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The Heap Guard feature wrapped SmmInternalFreePagesEx with
SmmInternalFreePagesExWithGuard but didn't add necessary
parameter check. This patch fixes this situation.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Initialize local variable to suppress warning C4703:
potentially uninitialized local pointer variable.
Both reads (dereferences) of "PciRootBridgeIo" in
PciBusDriverBindingStart() are only reached if
"gFullEnumeration" is TRUE on entry *and* we successfully
open the EfiPciRootBridgeIoProtocol interface.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Install IOMMU PPI for pre-memory phase and return
EFI_NOT_AVAILABLE_YET to indicate that DMA protection has been enabled,
but DMA buffer are not available to be allocated yet.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
EBC build failure is caused by d7a09cb86a.
It changes MAX_UINTN and MAX_ADDRESS definition as below. VarCheckUefiLib
and DxeCore uses MAX_UINTN and MAX_ADDRESS in the global data initialization.
New style has >> operator, and not supported by EBC compiler.
The fix is not to build VarCheckUefiLib and DxeCore for EBC arch.
#define MAX_UINTN ((UINTN) ~0)
==>
#define MAX_UINTN ((UINTN)(~0ULL >> (64 - sizeof (INTN) * 8)))
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current PXE driver uses zero GUID if failed to get the system GUID from smbios
table, and some OS PXE boot may fail in such case. This patch is to add a warning
message to inform user that smbios table is missed on the platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
SmiHandlerUnRegister() validates the DispatchHandle by checking
whether the first 32bit matches to a certain signature
(SMI_HANDLER_SIGNATURE).
But if a caller calls *UnRegister() twice and the memory freed by
first call still contains the signature, the second call may hang.
The patch fixes this issue by locating the DispatchHandle
in all SMI handlers, instead of checking the signature.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Considering following scenario (both NX memory protection and heap guard
are enabled):
1. Allocate 3 pages. The attributes of adjacent memory pages will be
|NOT-PRESENT| present | present | present |NOT-PRESENT|
2. Free the middle page. The attributes of adjacent memory pages should be
|NOT-PRESENT| present |NOT-PRESENT| present |NOT-PRESENT|
But the NX feature will overwrite the attributes of middle page. So it
looks still like below, which is wrong.
|NOT-PRESENT| present | PRESENT | present |NOT-PRESENT|
The solution is checking the first and/or last page of a memory block to be
marked as NX, and skipping them if they are Guard pages.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
If enabled, NX memory protection feature will mark all free memory as
NX (non-executable), including page 0. This will overwrite the attributes
of page 0 if NULL pointer detection feature is also enabled and then
compromise the functionality of it. The solution is skipping the NX
attributes setting to page 0 if NULL pointer detection feature is enabled.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This issue is a regression one caused by a patch at
425d25699b
That fix didn't take the 0 page to free into account, which still
needs to call UnsetGuardPage() even no memory needs to free.
The fix is just moving the calling of UnsetGuardPage() to the place
right after calling AdjustMemoryF().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Today's implementation only return key state when there is key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Today's implementation only return key state when there is key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Today's implementation only return key state when there is key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
"Entry->Link.ForwardLink = NULL;" is present in RemoveMemoryMapEntry()
for DxeCore, that is correct.
"Entry->Link.ForwardLink = NULL;" is absent in RemoveOldEntry()
for PiSmmCore, that is incorrect.
Without this fix, when FromStack in Entry is TRUE,
the "InsertTailList (&mMapStack[mMapDepth].Link, &Entry->Link);" in
following calling to CoreFreeMemoryMapStack() will fail as the entry
at mMapStack[mMapDepth] actually has been removed from the list.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Invoke the newly introduced SD/MMC override protocol to override
the capabilities register after reading it from the device registers,
and to call the pre/post host init and reset hooks at the appropriate
times.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Many ARM based SoCs have integrated SDHCI controllers, and often,
these implementations deviate in subtle ways from the pertinent
specifications. On the one hand, these deviations are quite easy
to work around, but on the other hand, having a collection of SoC
specific workarounds in the generic driver stack is undesirable.
So let's introduce an optional SD/MMC override protocol that we
can invoke at the appropriate moments in the device initialization.
That way, the workaround itself remains platform specific, but we
can still use the generic driver stack on such platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The call in ProbeMediaStatusEx() to the ReadDisk() function of the
EFI_DISK_IO_PROTOCOL interface implemented in DiskIoDxe/DiskIo.c
crashed in DiskIo2ReadWriteDisk() because of the NULL value of
the destination buffer pointer.
Pass the address of a buffer in the stack instead of a NULL
pointer.
The similar fix was applied to ProbeMediaStatus in commit
df473cc1fc
* MdeModulePkg/PartitionDxe: Fix media probe
Somehow ProbeMediaStatusEx() wasn't changed together.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Tested-by: Jian J Wang <jian.j.wang@intel.com>
After HTTP boot successfully in home mode, the HTTP device path will be
updated accordingly. So, the new device path may be appended with a DNS
device path node. When executing home mode boot again, the original HTTP
device path will mismatch with the new updated one, which will cause the
HTTP boot failure. So, we need update the current match algorithm to match
the correct FilePath. Since the DNS device path is an optional, we can skip
it check.
This patch is to fix above issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Within function NvmExpressPassThru():
The data buffer for the below 2 Admin command:
Create I/O Completion Queue command (Opcode 01h)
Create I/O Submission Queue command (Opcode 05h)
are not mapped to the PCI controller specific addresses.
But the current code logic also prevents the below NVM command:
Write (Opcode 01h)
from mapping its data buffer.
Hence, this commit refine the logic to resolve this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Per PI spec, the PciEnumerationComplete protocol installation
should be after PciIo installation.
Today's implementation installs the PciEnumerationComplete
after hardware enumeration is completed, but before PciIo
installation.
The change corrects the spec/implementation gap.
The change also benefits certain implementation that depends on
the PciIo handle in PciEnumerationComplete callback.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch is just a code cleanup with no functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When system boots to Shell without CDROM in the USB CDROM drive,
and then user inserts one CDROM with Eltorito file system,
"map -r" cannot show the the new Eltorito file system.
The root cause is when "map" command probes the media change
by calling dummy ReadBlockIo(), UsbMassStorage ReadBlockIo()
contains a bug that ignores the media change status:
UsbBootDetectMedia() ignores the EFI_MEDIA_CHANGED status
returned from UsbBootIsUnitReady(), in consequence, the
BlockIo protocol re-installation logic doesn't run.
By checking the code change history, below commit
SHA-1: 19bc852765
* remove unnecessary retry logic from usb mass storage driver.
adds the code to skip EFI_MEDIA_CHANGED status.
Talking with the original committer Tian Feng, he said the
change was just a code cleanup, not for a special bug fix.
So I revert part of the patch, only keep the change that
removes unnecessary retry logic. It can fix this bug.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This hole will cause page fault randomly. The root cause is that Guard
page, which is just freed back to page pool but not yet cleared not-
present attribute, will be allocated right away by internal function
CoreFreeMemoryMapStack(). The solution to this issue is to clear the
not-present attribute for freed Guard page before doing any free
operation, instead of after those operation.
The reason we didn't do this before is due to the fact that manipulating
page attributes might cause memory allocation action which would cause a
dead lock inside a memory allocation/free operation. So we always set or
unset Guard page outside the memory lock. After a thorough analysis, we
believe clearing a Guard page will not cause memory allocation because
memory we're to manipulate was already manipulated before for sure.
Therefore there should be no memory allocation occurring in this
situation.
Since we cleared Guard page not-present attribute before freeing instead
of after freeing, the debug code to clear freed memory can now be restored
to its original way (aka no checking and bypassing Guard page).
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Section data alignment should be made in the build generation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Section data alignment should be made in the build generation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Section data alignment should be made in the build generation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiReservedMemoryType, the BIOS will hang at a page fault exception
triggered by BootScriptExecutorDxe.
The root cause is that this driver will allocate memory of
EfiReservedMemoryType and relocate itself into this new memory. Since
EfiReservedMemoryType of memory is marked non-executable, re-start this
driver after relocation will cause exception. The fix is removing the NX
attribute after memory allocation.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiReservedMemoryType, the BIOS will hang at a page fault exception
during starting SMM driver.
The root cause is that SMM RAM is type of EfiReservedMemoryType and
marked as non-executable. The fix is simply removing NX attribute for
those memory.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
* In DxeIpIo, an ASSERT check is incorrectly used in IpIoAddIp(), which result
debug image hang when this API is called, this patch is to fix this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
XCODE5 doesn't support absolute addressing in the assembly code.
This change uses lea instruction to get the address.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Christian Ehrhardt <ehrhardt@genua.de>
Signed-off-by: Christian Ehrhardt <ehrhardt@genua.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Christian Ehrhardt <ehrhardt@genua.de>
The Graphics Output Protocol's mode information specifies the
PixelsPerScanLine property. Most of the time this is identical to
HorizontalResolution. However, due to alignment requirements etc. it
may be slightly larger. I.e. each scan line will have some "pixels"
that are not visible on the screen but consume space in the frame
buffer.
If the graphics output protocol correctly initializes
HorizontalResolution to 1366 and PixelsPerScanLine to 1376. As a
result the graphics output is broken.
If setting HorizontalResolution to 1376 instead, the output is fine
(except for 10 invisible pixels on the right of the screen).
The patch fixes this bug by using PixelsPerScanLine when calculating
the line width.
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Christian Ehrhardt <ehrhardt@genua.de>
Signed-off-by: Christian Ehrhardt <ehrhardt@genua.de>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Christian Ehrhardt <ehrhardt@genua.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Christian Ehrhardt <ehrhardt@genua.de>
* In DxeIpIo, there are several places use ASSERT() to check input
parameters without and descriptions or error handling. This patch
fixed this issue.
* Fixed some incorrect descriptions in code commence.
* Remove unneeded Exit tag in function IpIoOpen and IpIoConfigIp.
* Add EFIAPI tag for function IpIoRefreshNeighbor.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
* When the packet is not normal packet or icmp error packet, the code
does not recycle it by signal RecycleSignal event, and this will
result some memory leak. This patch is to fix this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
It didn't cause big issues when VT-d was disabled.
But in VT-d enabled platform, lack of EhcFreeUrb call caused
the DMA data was not moved back to user's buffer.
It caused the correct data cannot be got through sync interrupt
transfer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Today's implementation prints nothing when the format string cannot
fit in the report status extended data buffer.
It confuses user.
The patch changes to print partial message by truncating the format
string when it's too long.
The missing enhancement is the extended data buffer only reserves 96
bytes for the var-args. When the format string is not very long but
contains 13 %lx or %p, the var-args buffer is too small. Today's
implementation prints nothing for this case.
This patch doesn't change such behavior.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
* Since wireless network can switch at very short time, the time interval
of reconfig event checking is too long for this case. To achieve better
performance and scalability, separate this task from Ip4 tick timer.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
* The library API use array elements without any index range check, this
patch is to fix this issue to avoid null pointer reference.
V2
* Added an ASSERT check for the case PrefixLength equals to IP6_PREFIX_MAX.
* Synced some code descriptions to head file.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
* When build a DHCP message in function DhcpSendMessage() or DhcpRetransmit(),
a new NET_BUF is created by the library of NetbufFromExt, but it's not freed
after it is sent out. This patch is to fix this memory leak issue.
V2:
* Since packet has already been referred by DhcpSb->LastPacket, and will be
freed when sending another packet or clean up, there is no need to add an
extra free function in NetbufFromExt.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
In some case the ArrayIndex with UINT16 may be not large enough to
hold the multiplication result of HiiQuestion->VarOffset * 8;
So this patch update the data type to fix this potential issue.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
EBC compiler doesn't treat EFI_xxx as constant due to these macros
are UINT64 type in 64bit env and UINT32 type in 32bit env.
So it reports error when "case EFI_xxx" is used.
The patch changes to use if-else to fix EBC build failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
v2:
* Refine the commit log.
There are two place to close the ISCSI ExitBootServiceEvent:
#1.IScsiOnExitBootService(), which is the callback function of
ExitBootServiceEvent.
#2.IScsiCleanDriverData(), which will be invoked by ISCSI driver
binding stop().
So, the ExitBootServiceEvent will be closed and freed when exit boot
server is triggered. But it may be closed and freed again in ISCSI driver
binding stop(), which will result in the issue recorded at
https://bugzilla.tianocore.org/show_bug.cgi?id=742.
This patch is to resolve the issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
* In function Mtftp4WrqSendBlock(), when packet is not needed, function
returns EFI_ABORTED but not freed the packet buffer. It results some
memory leak and this patch is to fix this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
* This function sets returned status as token status and signal token
when error occurs, and it results token status not compliance with
spec definition. This patch fixed this issue.
* This function restore Tpl twice when Mtftp4WrqStart() returns an
error, this patch fixed this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
* Added some ASSERT descriptions for library APIs.
* Added "Optional" option for Context parameter in UdpIoCancelDgrams().
* Added function return status check for UdpIoFreeIo().
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
* In old implementation, the operation len-- assumes AsciiSPrint()
has counted NULL terminator, and it's not correct. This patch is
to fix this issue.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
* Library API should check the input parameters before use, or
ASSERT to tell it has to meet some requirements. But in DxeNetLib,
not all functions follows this rule.
* ASSERT shouldn't be used as error handling, add some handling code
for errors.
* Add some ASSERT commence in function notes.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
The NIC_ITEM_CONFIG_SIZE macro in DxeNetLib is defined as:
sizeof (NIC_IP4_CONFIG_INFO) + sizeof (EFI_IP4_ROUTE_TABLE) *
MAX_IP4_CONFIG_IN_VARIABLE. This macro should be surrounded
with parenthesis to avoid being incorrectly used.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
The Dhcp4.TransmitReceive() API should be able to use at any time according
to UEFI spec. While in classless addressing network, the netmask must be
explicitly provided together with the station address.
But if the DHCP instance haven't be configured with a valid netmask, we need
compute it according to the classful addressing rule. In such case, if the
user configures with class E IP address, ASSERT will happen, we need to handle
this case and return error status code.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
This is caused by a previous patch which tried to fix string over-read.
It's found that that patch for PrintLib in MdePkg will cause premature
terminating of loop used to traversing format string and cause incomplete
string output. Because this library uses similar code to do the same
job, it has the same issue too. So the fix is also the same.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to UEFI/PI spec, the AllocateXXXPool() interfaces should
return eight-byte aligned buffer that satisfies the required
HEADER_ALIGNMENT which is 4.
This patch adds ASSERT to make sure the bin at required alignment,
that can help catch the issue earlier about incorrect aligned buffer
returned from AllocateXXXPool().
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
According to UEFI/PI spec, the AllocateXXXPool() interfaces should
return eight-byte aligned buffer that satisfies the required
HEADER_ALIGNMENT which is 4.
This patch adds ASSERT to make sure the bin at required alignment,
that can help catch the issue earlier about incorrect aligned buffer
returned from AllocateXXXPool().
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
BfvHeader->FvLength is UINT64. Now, it prints with %x. It will cause the
late FvHandle to be as zero. So, its type is converted to UINT32.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Due to a potential hole in the stop condition of loop, the two continuous
access to ArgumentString (index, index+1) inside the loop might cause the
string ending character ('\0') and the byte after it to be read.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This change is the additional fix of commit
14b351e2ed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2:
* Fix GCC the build error.
This patch is to add the boundary condition check to make sure
the accessed buffer is valid.
Cc: Gary Lin <glin@suse.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Tested-by: Gary Lin <glin@suse.com>
Three issues addressed here:
a. Make NX memory protection and heap guard to be compatible
The solution is to check PcdDxeNxMemoryProtectionPolicy in Heap Guard to
see if the free memory should be set to NX, and set the Guard page to NX
before it's freed back to memory pool. This can solve the issue which NX
setting would be overwritten by Heap Guard feature in certain
configuration.
b. Returned pool address was not 8-byte aligned sometimes
This happened only when BIT7 is not set in PcdHeapGuardPropertyMask. Since
8-byte alignment is UEFI spec required, letting allocated pool adjacent to
tail guard page cannot be guaranteed.
c. NULL address handling due to allocation failure
When allocation failure, normally a NULL will be returned. But Heap Guard
code will still try to adjust the starting address of it, which will cause
a non-NULL pointer returned.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Jian J Wang
Liming Gao
Heyi Guo
Star Zeng
Jiaxin Wu
Marc-André Lureau
Dandan Bi
Hao Wu
Ruiyu Ni
Fu Siyuan
Kinney, Michael D
Leif Lindholm
Laszlo Ersek
Bret Barkelew
Ard Biesheuvel
Wang Fan