Replace AsciiStrDecimalToUintn with AsciiStrDecimalToUintnS to
return the correct status for the HTTP Port/ContentLength.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=244
Currently, when software HashLib (HashLibBaseCryptoRouter) and related
HashInstanceLib instances are used, PcdTcg2HashAlgorithmBitmap is
expected to be configured to 0 in platform dsc.
But PcdTcg2HashAlgorithmBitmap has default value 0xFFFFFFFF in
SecurityPkg.dec, and some platforms forget to configure it to 0 or
still configure it to 0xFFFFFFFF in platform dsc, that will make final
PcdTcg2HashAlgorithmBitmap value incorrect.
This patch is to add CONSTRUCTOR in HashLib (HashLibBaseCryptoRouter)
and PcdTcg2HashAlgorithmBitmap will be set to 0 in the CONSTRUCTOR.
Current HASH_LIB_PEI_ROUTER_GUID HOB created in
HashLibBaseCryptoRouterPei is shared between modules that link
HashLibBaseCryptoRouterPei.
To avoid mutual interference, separated HASH_LIB_PEI_ROUTER_GUID HOBs
with gEfiCallerIdGuid Identifier will be created for those modules.
This patch is also to add check in HashLib (HashLibBaseCryptoRouter)
for the mismatch of supported HashMask between modules that may link
different HashInstanceLib instances, warning will be reported if
mismatch is found.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
BmExpandMediaDevicePath contains a bug that it uses the
uninitialized Handle.
Since the function is called when the Handle supports BlockIo
or SimpleFileSystem, when there is no SimpleFileSystem installed
on the Handle, BlockIo is *guaranteed* to be installed on the Handle.
The fix initializes the Handle by locating the BlockIo protocol
from the device path.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Fixed System auto shutdown when it reached minus 20 degree.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: lushifex <shifeix.a.lu@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
current in the map file, there have two ways for var to save its offset,
if the varname is short, then the offset will in the same line with
varname, otherwise, it saved in the next line.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When writing to IO port 0xB2 (ICH9_APM_CNT), QEMU by default injects an
SMI only on the VCPU that is writing the port. This has exposed corner
cases and strange behavior with edk2 code, which generally expects a
software SMI to affect all CPUs at once. We've experienced instability
despite the fact that OVMF sets PcdCpuSmmApSyncTimeout and
PcdCpuSmmSyncMode differently from the UefiCpuPkg defaults, such that they
match QEMU's unicast SMIs better. (Refer to edk2 commits 9b1e378811 and
bb0f18b0bce6.)
Using the new fw_cfg-based SMI feature negotiation in QEMU (see commits
50de920b372b "hw/isa/lpc_ich9: add SMI feature negotiation via fw_cfg" and
5ce45c7a2b15 "hw/isa/lpc_ich9: add broadcast SMI feature"), we can ask
QEMU to broadcast SMIs. Extensive testing from earlier proves that
broadcast SMIs are only reliable if we use the UefiCpuPkg defaults for the
above PCDs. With those settings however, the broadcast is very reliable --
the most reliable configuration encountered thus far.
Therefore negotiate broadcast SMIs with QEMU, and if the negotiation is
successful, dynamically revert the PCDs to the UefiCpuPkg defaults.
Setting the PCDs in this module is safe:
- only PiSmmCpuDxeSmm consumes them,
- PiSmmCpuDxeSmm is a DXE_SMM_DRIVER, launched by the SMM_CORE
(MdeModulePkg/Core/PiSmmCore/PiSmmCore.inf),
- the SMM_CORE is launched by the SMM IPL runtime DXE driver
(MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf),
- the SMM IPL has a DEPEX on EFI_SMM_CONTROL2_PROTOCOL,
- OvmfPkg/SmmControl2Dxe produces that protocol.
The end result is that PiSmmCpuDxeSmm cannot be dispatched before
SmmControl2Dxe installs EFI_SMM_CONTROL2_PROTOCOL and returns from its
entry point. Hence we can set the PCD's consumed by PiSmmCpuDxeSmm in
SmmControl2Dxe.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=230
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Move the platform-specific default values for these PCDs from the
[PcdsFixedAtBuild] / [PcdsFixedAtBuild.X64] sections to the
[PcdsDynamicDefault] section.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=230
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
PcdGenericWatchdogControlBase & PcdGenericWatchdogRefreshBase
are declared as UINT32 values in ArmPkg.dec, but for platforms
with addresses in the memory range above 4GB this causes build
error F000: Too large PCD value for datum type [UINT32]
of PCD gArmTokenSpaceGuid.PcdGenericWatchdogControlBase
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Alexei Fedorov <alexei.fedorov@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=361
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
After this update, BaseTools/Makefile can be trig at the other directory.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
All the event log entry in TCG2 Event log format should be TCG_PCR_EVENT2
except event log header. Defined by TCG EFI Spec 2.0 00.13
https://trustedcomputinggroup.org/wp-content/uploads/EFI-Protocol-Specification-rev13-160330final.pdf
Cc: Long Qin <qin.long@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Before the "cd fs0:dir" fix, CD only prints destination directory
when the destination contains ":".
However, the "cd fs0:dir" fix changed CD to always print destination
directory.
This patch changes CD to never print destination directory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Chris J Phillips <chrisp@hpe.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
We are now sufficiently equipped to implement the new QemuFwCfgSkipBytes()
API.
The previous patch and this one enable ArmVirtPkg/QemuFwCfgLib to
overwrite part of a writeable fw_cfg file, which will be particularly
useful for the upcoming QEMU_LOADER_WRITE_POINTER command in
OvmfPkg/AcpiPlatformDxe.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We use the "InternalQemuFwCfgReadBytes" static function pointer to
dispatch the reading of fw_cfg bytes between MMIO and DMA. This pointer is
initialized to MMIO, and we set it to DMA in the library constructor if
DMA is available.
Unlike the above, we write fw_cfg bytes only with MMIO at the moment.
Extend the write functionality so that it follows the read pattern:
- introduce the new function typedef WRITE_BYTES_FUNCTION,
- extract the current (MMIO-only) write internals from
QemuFwCfgWriteBytes() to MmioWriteBytes(),
- provide a DMA-based implementation in DmaWriteBytes() -- a thin wrapper
around DmaTransferBytes(),
- set the new static function pointer "InternalQemuFwCfgWriteBytes"
according to the DMA feature provided by QEMU,
- In QemuFwCfgWriteBytes(), call the best available method through
"InternalQemuFwCfgWriteBytes".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The DmaReadBytes() function that we currently use only for reading --
through the InternalQemuFwCfgReadBytes function pointer, in case the DMA
interface is available -- is suitable with minimal changes for two more
operations provided by the DMA interface, WRITE and SKIP. Expose the
Control parameter in the function prototype, rename the function to
DmaTransferBytes(), and rebase DmaReadBytes() to it.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Introduce the new public API QemuFwCfgSkipBytes(), for advancing over
bytes in the selected firmware configuration item without transferring
data between the item and the caller.
When the DMA interface is available (the common case), the operation is
instantaneous. As a fallback, provide a loop of chunked reads into a small
stack-allocated scratch buffer.
This patch enables OvmfPkg/QemuFwCfgLib to overwrite part of a writeable
fw_cfg file, which will be particularly useful for the upcoming
QEMU_LOADER_WRITE_POINTER command in OvmfPkg/AcpiPlatformDxe.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The fw_cfg DMA interface provides a simple method to skip over bytes in an
fw_cfg blob before reading or writing more bytes.
InternalQemuFwCfgDmaBytes() can support it easily, we just have to expose
the Control parameter more flexibly than the current "Write" BOOLEAN.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
ARM TZASC-380 IP provides a mechanism to split memory regions being
protected via it into eight equal-sized sub-regions. A bit-setting
allows the corresponding subregion to be disabled.
Several NXP/FSL SoCs support the TZASC-380 IP block and allow
the DDR connected via the TZASC to be partitioned into regions
having different security settings and also allow subregions
to be disabled.
This patch enables this support and can be used for SoCs which
support such a partition of DDR regions.
Details of the 'subregion_disable' register can be viewed here:
http://infocenter.arm.com/help/topic/com.arm.doc.ddi0431c/CHDIGDCI.html
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@nxp.com>
[bhupesh.linux@gmail.com : Added gmail ID as NXP one is no longer valid]
Signed-off-by: Bhupesh Sharma <bhupesh.linux@gmail.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=338
Update the Tpm12CommandLib to consistently check the returnCode
field of a response packet. These checks are missing from the
GetCapability and SelfTest commands. The functions
Tpm12ContinueSelfTest(), Tpm12GetCapabilityFlagPermanent(), and
Tpm12GetCapabilityFlagVolatile() are updated to verify that the
response returnCode is not an error.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
The Marvell Yukon MAC address load supported only on Juno R1 and R2.
It disabled for Juno R0 due to PCI issues on this board.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daniil Egranov <daniil.egranov@arm.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The implementation was already there but through a private flag
"-_e". The patch removes "-_e" support and add "-ec" support.
Removing old "-_e" support makes the pci command more clean.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=354
The patch removes the local PCI definitions and uses the definitions
defined in MdePkg/Include/IndustryStandard folder.
There is no functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jarben.carsey@intel.com>
Use UEFI_VARIABLE_DATA data structure according to TCG PC-Client PFP Spec
00.21.
http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific_Platform_Profile_for_TPM_2p0_Systems_v21.pdf
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Use UEFI_VARIABLE_DATA data structure according to TCG PC-Client PFP Spec
00.21.
http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific_Platform_Profile_for_TPM_2p0_Systems_v21.pdf
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=339
The patch removes the assumption in QemuVideoDxe driver that it
wrongly assumes the frame buffer configure size is the same in
different video modes.
The assumption is true in old FrameBufferBltLib but is false in
new implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=339
The patch refines ConfigurePixelBitMaskFormat() to prepare the
enhancement in next commit: Enhance this library to use dynamic
allocated line buffer to reduce memory usage of frame buffer
configure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Current it only support the system environment variables in the !include
statement, $(WORKSPACE), $(PACKAGES_PATH), $(EFI_SOURCE), $(EDK_SOURCE),
$(ECP_SOURCE), this patch extend the usage to support the Global macros
and the macro which defined before the statement.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When we create a HTTP driver service binding private
instance, there may be different DriverBindingHandle
for Ipv4 or Ipv6, so it is essential to distinguish
the HttpService image which will be used in open
protocol or close protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
If the code eventually returns "Status" anyway, it does not make
sense to explicitely return "Status" in case of an error, too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
v2
* Move the setting above the "!ifndef $(USE_OLD_SHELL)" part.
* Un-indent the setting to column zero.
(Comments from Laszlo)
Overwrite the value of PcdAllowHttpConnections to allow HTTP
connections if HTTP Boot enabled (-D HTTP_BOOT_ENABLE).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
v3:
* Correct the commits grammar
v2:
* Rename the flag.
This flag is to overwrite the value of PcdAllowHttpConnections,
then the platform can make a decision whether to allow HTTP
connections or not.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Gary Lin <glin@suse.com>
v3:
* Correct the commits grammar
v2:
* Rename the PCD to PcdAllowHttpConnections.
* Refine the PCD descriptions.
If the value of PcdAllowHttpConnections is TRUE, HTTP connections are
allowed. Both the "https://" and "http://" URI schemes are permitted.
Otherwise, HTTP connections are denied. Only the "https://" URI scheme
is permitted.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Add StatusCode Handler into APRIORI DXE so that they can run early, then
more DEBUG message can print.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Measure DBT into PCR[7] when it is updated between initial measure and
ExitBootService. Measure "SecureBoot" change after PK update.
Spec version : TCG PC Client PFP 00.37. http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific_Platform_Profile_for_TPM_2p0_Systems_v21.pdf
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Measure DBT into PCR[7] in initial measurement phase according
to TCG PC Client PFP 00.37. http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific_Platform_Profile_for_TPM_2p0_Systems_v21.pdf
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Update PCR[7] measure logic according to TCG PC Client PFP 00.37.
Only entries in DB that is used for image authentication need to be
measured.
http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific_Platform_Profile_for_TPM_2p0_Systems_v21.pdf
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Jiaxin Wu
Star Zeng
Ruiyu Ni
lushifex
Liming Gao
Yonghong Zhu
Laszlo Ersek
Alexei
Zhang, Chao B
Bhupesh Sharma
Michael Kinney
Daniil Egranov
Nikolai SAOUKH
Zhang, Lubo
Thomas Huth