REF: https://bugzilla.tianocore.org/show_bug.cgi?id=363
The definition name for ACPI IO Remapping Table signature is incorrect
in Acpi60.h and Acpi61.h as below:
EFI_ACPI_6_0_INTERRUPT_SOURCE_OVERRIDE_SIGNATURE
EFI_ACPI_6_1_INTERRUPT_SOURCE_OVERRIDE_SIGNATURE
The name should be changed to
EFI_ACPI_6_0_IO_REMAPPING_TABLE_SIGNATURE
EFI_ACPI_6_1_IO_REMAPPING_TABLE_SIGNATURE
The comments
///
/// "IORT" Interrupt Source Override
///
will be also changed to
///
/// "IORT" I/O Remapping Table
///
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
DEVICE_ID_NOCARE is defined as 0xFFFF but Spec says (UINT64) -1
should be used to match any VendorId/DeviceId/RevisionId/
SubsystemVendorId/SubsystemDeviceId.
PCI_BAR_OLD_ALIGN/PCI_BAR_EVEN_ALIGN/PCI_BAR_SQUAD_ALIGN/
PCI_BAR_DQUAD_ALIGN are defined but Spec doesn't have such
definitions.
PCI_BAR_ALL is defined as 0xFF but Spec says (UINT64)-1 should be
used to match all BARs.
PCI_ACPI_UNUSED and PCI_BAR_NOCHANGE are defined as 0 which
compliant with Spec but the name is too general and causes confusing.
IncompatiblePciDeviceSupport could directly use 0.
All of the above macros are marked as deprecated.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=340
TPM Device (Type 43) definition has been added at
713e4b007c.
This patch is to add definitions for below items.
• BIOS Information (Type 0):
– Add new entry for extended BIOS ROM size
• System Enclosure or Chassis (Type 3):
– Add new chassis types: IoT Gateway and Embedded PC
– Add new chassis types: Mini PC and Stick PC
• Processor Information (Type 4):
– Add Intel Core m3 m5 m7 processors
– Add processor socket AM4
– Add processor socket LGA1151
– Add processor socket BGA1356, BGA1440, BGA1515
– Add AMD Opteron A-Series processor
– Add processor socket LGA3647-1
– Add processor socket SP3 Processors
– Add families for ARMv7 and ARMv8
– Add family for AMD Opteron(TM) X3000 Series APU
• Cache Information (Type 7):
– Extend to support Cache sizes >2047 MB
• System Slots (Type 9):
– Add Mini PCIe support
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Starting with SMBIOS spec version 2.7, Type 3 added SKU Number.
SKU Number is at a variable offset (depends on count and length of Contained Elements), so cannot add SKU Number to the SMBIOS_TABLE_TYPE3 structure.
Adding comments to explain how to get SKU Number.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Added definitions for the new SMBIOS Type 43 record.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Augustine Linson P <linson.augustine@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Fix incompatible change. Some modules are still referencing old definition.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Update TPM2 ACPI Table revision to 4. New version & data structure is
defined in TCG ACPI Spec 00.37
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
This path is used to standardize TLS definitions from related
RFCs. Including TLS Cipher Suites, TLS Version, TLS Content Type
and TLS Record Header, etc.
Cc: Long Qin <qin.long@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Thomas Palmer <thomas.palmer@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=201
In V3, Use Odt to replace ODT, Cke to replace CKE, Id to replace ID,
and Cl to replace CL in structure field name.
In V2, separate DDR3, DDR4 and LPDDR definition into the different files;
use the different SPD prefix as structure definitions for each SPD type.
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
The "Pci22.h" header file defines the macro EFI_PCI_CAPABILITY_ID_HOTPLUG
with value 0x06. According to all of:
- later parts of the same header file,
- Appendix H ("Capability IDs") of the PCI Local Bus Specification
Revision 2.3,
- and Chapter 2 ("Capability IDs") of the PCI Code and ID Assignment
Specification Revision 0.9,
0x06 means "CompactPCI Hot Swap". It does not mean "PCI Hot-Plug": that
capability is described by ID 0x0C:
0Ch PCI Hot-Plug -- This Capability ID indicates that the associated
device conforms to the Standard Hot-Plug Controller model.
Therefore EFI_PCI_CAPABILITY_ID_HOTPLUG is arguably a misnomer. PciBusDxe
(mis-)uses EFI_PCI_CAPABILITY_ID_HOTPLUG in the IsSHPC() helper function
to identify PCI Hot-Plug capability.
In order to preserve compatibility with existent code, leave
EFI_PCI_CAPABILITY_ID_HOTPLUG alone, and introduce
EFI_PCI_CAPABILITY_ID_SHPC with the right ID value.
Cc: "Johnson, Brian J." <bjohnson@sgi.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
v2:
*add some new arch types for PXE boot.
refine the definition of arch types for http boot
Add a new head file Dhcp.h in Mde/Include/IndustryStandard, normalize the
universal option numbers and other network number tags.
Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The definitions are required by certain platform initialization
code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Reviewed-by: Amy Chan <amy.chan@intel.com>
Adds a public header for NVMe v1.1 spec. definitions. The majority
of these definitions where copied from a private header in
MdeModulePkg/Bus/Pci/NvmExpress/NvmExpressHci.h. Additional
definitions were added e.g. the NVMe Smart Health Log and
Firmware Info. Log structures. These definitions should be
in a public header so that clients of the NVMe passthru protocol
can use them to execute NVMe commands.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Darbin Reyes <darbin.emm.reyes@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to the SCSI Block Commands - 4 (SBC-4) spec, the patch add SCSI
unmap command support in IndustryStandard/Scsi.h.
The following changes have been made:
1. Add SCSI unmap command OP Code
2. Update the structure definition for Block Limits VPD page
3. Add structure definitions for UNMAP parameter list header & UNMAP block
descriptor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add NFIT definition from ACPI 6.1 for the NVDIMM Control Region
Structure Valid Fields for Manufacturing Location and Manufacturing Date
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The ComId for Block SID authentication command is
0x0005 according to "TCG Storage Feature Set: Block
SID Authentication Specification Version 1.0.0". Update code to
follow this spec requirement.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add #defines for "Expect" header, which is a part of RFC 2616
and used for HTTP PUT/POST operations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The Microsoft Debug Port Table 2 (DBG2) specification revision
October 6, 2015 adds support for Serial Port Subtypes for ARM.
This patch adds these definitions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The Serial Port Console Redirection Table specification Version 1.03 -
August 10, 2015 adds support for Serial Port Subtypes for ARM. These
Subtypes are described in the Table 3 of the Microsoft Debug Port Table
2 (DBG2) Specification - December 10, 2015.
This patch adds macro definitions for these.
Code at: 79678a0f39
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
These definitions are defined in SD physical layer simplified spec
and eMMC electrical standard spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The definitions are defined in TCG storage core and opal spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
As the SMBIOS table types belong to the SMBIOS standard, they were
moved from the SMBIOS Protocol header into the SMBIOS
IndustryStandard header without the EFI_-prefix. Defines with the
EFI_-prefix have been kept in the Protocol header for
backwards-compatibility, resolving to the IndustryStandard defines.
The same has been done with the C types.
The SMBIOS table header structure had been duplicated -
SMBIOS_STRUCTURE in the IndustryStandard header and
EFI_SMBIOS_TABLE_HEADER in the Protocol file - and thus the
Protocol type was replaced with a typedef to the InudstryStandard's.
This doesn't only make it easier to maintain, but it also prevents
potential future issues as the Protocol type has been aligned, while
the standard and the IndustryStandard header declare it as
byte-packed.
This has worked well till now only because the members of the
structure do not require alignment yet.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add additional HTTP 1.1 definitions that are useful in HTTP
applications, such as User-Agent, Location, and x-Auth-Token
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The HeaderLog field of the PCIe Extended Capabilities Advanced Error
Reporting structure was incorrectly defined as a 32-bit field. The PCIe
2.1 Base Specification, section 7.10, lists this as 16 bytes, or 4
DWORDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Update Ipmi2.0 definitions header files for data structure
name suffix for request/response data and completion code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daocheng Bu <daocheng.bu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19484 6f19259b-4bc3-4df7-8a09-765794883524
Update BaseAddress in the SPCR structure to use
EFI_ACPI_5_0_GENERIC_ADDRESS_STRUCTURE
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19456 6f19259b-4bc3-4df7-8a09-765794883524
Add common HTTP 1.1 industry standard definitions for use in HTTP
clients/applications. List includes: HTTP methods, request/response
headers, and encodings.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19435 6f19259b-4bc3-4df7-8a09-765794883524
Star Zeng
Ruiyu Ni
Zhang, Chao B
Chris Phillips
Linson Augustine
Jiaxin Wu
Liming Gao
Gary Lin
Giri P Mudusuru
Laszlo Ersek
Feng Tian
Zhang Lubo
Darbin Reyes
Jiewen Yao
Hao Wu
Samer El-Haj-Mahmoud
Eric Dong
Nagaraj Hegde
Sami Mujawar
Marvin Häuser
Daocheng Bu
Samer El-Haj-Mahmoud