"UefiCpuPkg/UefiCpuPkg.dec" already allows platforms to make
PcdCpuMaxLogicalProcessorNumber dynamic, however PiSmmCpuDxeSmm does not
take this into account everywhere. As soon as a platform turns the PCD
into a dynamic one, at least S3 fails. When the PCD is dynamic, all
PcdGet() calls translate into PCD DXE protocol calls, which are only
permitted at boot time, not at runtime or during S3 resume.
We already have a variable called mMaxNumberOfCpus; it is initialized in
the entry point function like this:
> //
> // If support CPU hot plug, we need to allocate resources for possibly
> // hot-added processors
> //
> if (FeaturePcdGet (PcdCpuHotPlugSupport)) {
> mMaxNumberOfCpus = PcdGet32 (PcdCpuMaxLogicalProcessorNumber);
> } else {
> mMaxNumberOfCpus = mNumberOfCpus;
> }
There's another use of the PCD a bit higher up, also in the entry point
function:
> //
> // Use MP Services Protocol to retrieve the number of processors and
> // number of enabled processors
> //
> Status = MpServices->GetNumberOfProcessors (MpServices, &mNumberOfCpus,
> &NumberOfEnabledProcessors);
> ASSERT_EFI_ERROR (Status);
> ASSERT (mNumberOfCpus <= PcdGet32 (PcdCpuMaxLogicalProcessorNumber));
Preserve these calls in the entry point function, and replace all other
uses of PcdCpuMaxLogicalProcessorNumber -- there are only reads -- with
mMaxNumberOfCpus.
For PcdCpuHotPlugSupport==TRUE, this is an unobservable change.
For PcdCpuHotPlugSupport==FALSE, we even save SMRAM, because we no longer
allocate resources needlessly for CPUs that can never appear in the
system.
PcdCpuMaxLogicalProcessorNumber is also retrieved in
"UefiCpuPkg/Library/SmmCpuFeaturesLib/SmmCpuFeaturesLib.c", but only in
the library instance constructor, which runs even before the entry point
function is called.
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=116
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
AP will get target C-State from eax[7:4]. We do shift in ebx firstly before set
to eax. It will lead ebx is incorrect in the next time.
The fix is to set ebx to eax firstly and does shift in eax. Thus, ebx could keep
original value.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Add one semaphore to make sure BSP to wait till all APs run in AP safe loop
code.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
For long mode DXE, we will disable paging on AP to protected mode to execute AP
safe loop code in reserved memory range under 4GB. But we forget to allocate
stack for AP under 4GB and AP still are using original AP stack. If original AP
stack is larger than 4GB, it cannot be used after AP is transferred to protected
mode. Besides MwaitSupport == TRUE, AP stack is still required during phase of
disabling paging in long mode DXE.
Moreover, even though AP stack is always under 4GB (a) in Ia32 DXE and (b) with
this patch, after transferring to protected mode from X64 DXE, AP stack
(in BootServiceData) maybe crashed by OS after Exit Boot Service event.
This fix is to allocate reserved memory range under 4GB together with AP safe
loop code. APs will switch to new stack in safe loop code.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
AP loop function is already saved into global variable, needn't to get it from
AP function parameter.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
This patch fixes the first part of
https://bugzilla.tianocore.org/show_bug.cgi?id=242
Previously, when SMM exception happens, "stack overflow" is misreported.
This patch checked the PF address to see it is stack overflow, or
it is caused by SMM page protection.
It dumps exception data, PF address and the module trigger the issue.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
According to the Intel SDM (325462-060US / September 2016),
> INPUT EAX = 0BH: Returns Extended Topology Information
>
> [...] Software must detect the presence of CPUID leaf 0BH by verifying
> (a) the highest leaf index supported by CPUID is >= 0BH, and
> (b) CPUID.0BH:EBX[15:0] reports a non-zero value. [...]
The "GetApicId" sections in the Ia32 and X64 "MpFuncs.nasm" files do not
perform check (b).
This causes an actual bug in the following OVMF setup:
- Intel W3550 host processor <http://ark.intel.com/products/39720/>,
- the QEMU/KVM guest's VCPU model is set to "host", that is, "the CPU
visible to the guest should be exactly the same as the host CPU".
Under "GetApicId", check (a) passes: the CPUID level of the W3550 is
exactly 11 decimal. However, leaf 11 itself is not supported, therefore
EDX is set to zero:
> If a value entered for CPUID.EAX is less than or equal to the maximum
> input value and the leaf is not supported on that processor then 0 is
> returned in all the registers.
Because we don't check (b), the "GetProcessorNumber" section of the code
is reached with an initial APIC ID of 0 in EDX on all of the APs. Given
that "GetProcessorNumber" searches the
"MP_CPU_EXCHANGE_INFO.CpuInfo[*].InitialApicId" fields for a match, all
APs enter ApWakeupFunction() with an identical "NumApsExecuting"
parameter. This results in unpredictable guest behavior (crashes, reboots,
hangs etc).
Reorganize the "GetApicId" section and add the missing check in both
assembly files.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
According to the Intel SDM (325462-060US / September 2016),
> INPUT EAX = 0BH: Returns Extended Topology Information
>
> [...] Software must detect the presence of CPUID leaf 0BH by verifying
> (a) the highest leaf index supported by CPUID is >= 0BH, and
> (b) CPUID.0BH:EBX[15:0] reports a non-zero value. [...]
The LocalApicLib instances in UefiCpuPkg do not perform check (b).
This causes an actual bug in the following OVMF setup:
- Intel W3550 host processor <http://ark.intel.com/products/39720/>,
- the QEMU/KVM guest's VCPU model is set to "host", that is, "the CPU
visible to the guest should be exactly the same as the host CPU".
In the GetInitialApicId() function, check (a) passes: the CPUID level of
the W3550 is exactly 11 decimal. However, leaf 11 itself is not supported,
therefore EDX is set to zero:
> If a value entered for CPUID.EAX is less than or equal to the maximum
> input value and the leaf is not supported on that processor then 0 is
> returned in all the registers.
Because we don't check (b), we return 0 as initial APIC ID on the BSP and
on all of the APs as well.
Add the missing check.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Move the declaration of these PCDs from the
[PcdsFixedAtBuild, PcdsPatchableInModule]
section of "UefiCpuPkg/UefiCpuPkg.dec" to the
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
section. Their types, default values, and token values remain unchanged.
Only UefiCpuPkg/PiSmmCpuDxeSmm consumes these PCDs, specifically on the
call stack of its entry point function, and it turns them into static or
dynamically allocated data in SMRAM:
PiCpuSmmEntry() [PiSmmCpuDxeSmm.c]
InitializeSmmTimer() [SyncTimer.c]
PcdCpuSmmApSyncTimeout
-> mTimeoutTicker
InitializeMpServiceData() [MpService.c]
InitializeMpSyncData() [MpService.c]
PcdCpuSmmSyncMode
-> mSmmMpSyncData->EffectiveSyncMode
However, there's another call path to fetching "PcdCpuSmmSyncMode", namely
SmmInitHandler() [PiSmmCpuDxeSmm.c]
InitializeMpSyncData() [MpService.c]
PcdCpuSmmSyncMode
-> mSmmMpSyncData->EffectiveSyncMode
and this path is exercised during S3 resume (as stated by the comment in
SmmInitHandler() too, "Initialize private data during S3 resume").
While we can call the PCD protocol (via PcdLib) for fetching dynamic PCDs
in the entry point function, we cannot do that at S3 resume. Therefore
pre-fetch PcdCpuSmmSyncMode into a new global variable (which lives in
SMRAM) in InitializeMpServiceData(), just before calling
InitializeMpSyncData(). This way InitializeMpSyncData() can retrieve the
stashed PCD value from SMRAM, regardless of the boot mode.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=230
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
When XD is not supported, the BIT63 is reserved.
We should not set BIT63 in the page table.
Test OVMF IA32/IA32X64 with XD enabled/disabled.
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
v2:
Per Laszlo and Andrew's comments at
https://lists.01.org/pipermail/edk2-devel/2016-November/004759.html
SecCoreData->StackBase is VOID * type. We should use %p to dump VOID * type.
SecCoreData->StackSize is UINTN type, but %x only could print unsinged-int
type. We will cast it to UINT32 firstly and then use %x to print it.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Once platform selects the incorrect instance, the caller could know it from
return status and ASSERT().
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Add volatile qualifier to mNumberToFinish to prevent GCC 5.4
compiler from optimizing away required logic in ACPI S3 resume.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Update TransferApToSafeState() use UINTN params to reduce the
number of type casts required in these calls. Also change
the NumberToFinish parameter from UINT32* to UINTN
NumberToFinishAddress to resolve issues with conversion from
a volatile pointer to a non-volatile pointer. The assembly
code that receives the NumberToFinishAddress value must treat
that memory location as a volatile to track the number of APs.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
The cached "CPU_INFO_IN_HOB.ApTopOfStack" field currently has type UINT32.
This is not ideal because the AP stacks are located within
"CpuMpData->Buffer", which is allocated with a plain AllocatePages() call
in MpInitLibInitialize():
platform CpuMpPei included PEI RAM > 4GB result
-------- ----------------- ------------- ------
Ia32 * n/a good
Ia32X64 no n/a BAD
Ia32X64 yes n/a good
X64 no * BAD
X64 yes no good
X64 yes yes BAD
- If we are on an Ia32X64 or X64 platform that does not include CpuMpPei,
then CpuDxe cannot reuse the CPU_INFO_IN_HOB structures preallocated by
CpuMpPei (through the CpuInitMpLib GUID HOB), and then AllocatePages()
-- invoked first in 64-bit DXE -- could return an address outside of
32-bit address space.
- If we are on an X64 platform where the permanent PEI RAM extends above
the 32-bit address space, then the same issue can surface even if
CpuMpPei is included: even the original allocation of the
CPU_INFO_IN_HOB structures, by CpuMpPei, could be satisfied from above
4GB.
The original "AP init" branch in "X64/MpFuncs.nasm" correctly considers a
64-bit stack start: the "MP_CPU_EXCHANGE_INFO.StackStart" field has type
UINTN, and the code uses QWORD addition and movement to set RSP from it.
Adapt the "GetApicId" branch of "X64/MpFuncs.nasm":
- change the type of "CPU_INFO_IN_HOB.ApTopOfStack" to UINT64,
- remove the explicit truncation to UINT32 in InitializeApData(),
- update the "GetNextProcNumber" iteration size to the new size of
"CPU_INFO_IN_HOB",
- set RSP with a QWORD movement from "CPU_INFO_IN_HOB.ApTopOfStack".
Because the same CPU_INFO_IN_HOB structure is used by "Ia32/MpFuncs.nasm",
we have to update the "GetNextProcNumber" iteration size there as well.
The ESP setting can be preserved as a DWORD movement from the original
offset (decimal 12), since our integers are little endian.
Cc: Jeff Fan <jeff.fan@intel.com>
Fixes: 845c5be1fd
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
The recent patch "UefiCpuPkg/MpInitLib: Program AP stack in fixed address"
inadvertently broke the first startup of APs during X64 PEI, because in
the TestLock section of the code, it replaced the access to the
NumApsExecuting counter with an access to the unrelated InitFlag field.
Cc: Jeff Fan <jeff.fan@intel.com>
Fixes: 845c5be1fd
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
At this point, ESI still has the value from EBX.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
PiSmmCpuDxeSmm consumes SmmAttributesTable and setup page table:
1) Code region is marked as read-only and Data region is non-executable,
if the PE image is 4K aligned.
2) Important data structure is set to RO, such as GDT/IDT.
3) SmmSaveState is set to non-executable,
and SmmEntrypoint is set to read-only.
4) If static page is supported, page table is read-only.
We use page table to protect other components, and itself.
If we use dynamic paging, we can still provide *partial* protection.
And hope page table is not modified by other components.
The XD enabling code is moved to SmiEntry to let NX take effect.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
If enabled, SMM will not use on-demand paging.
SMM will build static page table for all memory.
The page table size depend on 2 things:
1) The 1G paging capability.
2) The whole system memory/MMIO addressing capability.
A) If the system only supports 2M paging,
When the whole memory/MMIO is 32bit, we only need 1+1+4=6 pages for 4G.
When the whole memory/MMIO is 39bit, we need 1+1+256 pages (~ 1M)
When the whole memory/MMIO is 48bit, we need 1+256+256*256 pages (~ 257M)
B) If the system supports 1G paging.
When the whole memory/MMIO is 32bit, we only need 1+1+4=6 pages for 4G.
(We still generate 2M page for maintenance consideration.)
When the whole memory/MMIO is 39bit, we still need 6 pages.
(We setup 1G paging for >1G.)
When the whole memory/MMIO is 48bit, we need 1+256 pages (~ 1M).
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
When BSP switched, we need to update some AP information. For example,
ApStartupSignalBuffer and ApTopOfStack.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Currently, MpInitLib will program AP stack in dynamic address. Each processor
will calculate its stack address by adding stack size based on the last stack
address. That means AP may have the different stack address everytime it is
wakeup by INIT-SIPI-SIPI.
When all APs have wakeup to execute AP task, each each has been assigned one
stack address. Once the timeout happened on some of APs, BSP will send INIT-
SIPI-SIPI to wake up APs. We need to re-assign stack for APs. Based on the
current implementation, we might assign one stack address used by other APs.
It will cause the unexpected stack overlapped issue.
This fix changed the stack assignment policy. We will record the stack address
assigned to AP at first time AP wakeup. When AP failed on AP task, BSP could
reassigned the same stack for it.
Getting initial APIC ID in assembly code could help AP to get saved its stack
address.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Some CPU information (InitialApicId/ApicId/Health) are duplicated in CPU_AP_DATA
and CPU_INFO_IN_HOB.
This update is to remove the ones from CPU_AP_DATA and update MpInitLib to
consume the ones from CPU_INFO_IN_HOB.
V2:
Fixed potential un-initialized variable issue.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
If BSP found APs timeout happened when AP executing AP task, BSP will reset APs
by WakeUpAP(). However, if ApLoopMode is ApMwaitLoop or ApRunLoop, WakeUpAp()
will try to write semaphore in memory to wake up AP. It cannot wake up APs
actually if APs still executing AP task.
This fix is to set ApInitReconfig flag to force BSP to send INIT-SIPI-SIPI to
wake up APs.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Cr3Location offset value should be 0x34 not 0x3C.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>
We will put APs into hlt-loop in safe code. But we decrease mNumberToFinish
before APs enter into the safe code. Paolo pointed out this gap.
This patch is to move mNumberToFinish decreasing to the safe code. It could
make sure BSP could wait for all APs are running in safe code.
https://bugzilla.tianocore.org/show_bug.cgi?id=216
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
On S3 path, we may transfer to long mode (if DXE is long mode) to restore CPU
contexts with CR3 = SmmS3Cr3 (in SMM). AP will execute hlt-loop after CPU
contexts restoration. Once one NMI or SMI happens, APs may exit from hlt state
and execute the instruction after HLT instruction. If APs are running on long
mode, page table is required to fetch the instruction. However, CR3 pointer to
page table in SMM. APs will crash.
This fix is to disable long mode on APs and transfer to 32bit protected mode to
execute hlt-loop. Then CR3 and page table will no longer be required.
https://bugzilla.tianocore.org/show_bug.cgi?id=216
Reported-by: Laszlo Ersek <lersek@redhat.com>
Analyzed-by: Paolo Bonzini <pbonzini@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
On S3 path, we will wake up APs to restore CPU context in PiSmmCpuDxeSmm
driver. However, we place AP in hlt-loop under 1MB space borrowed after CPU
restoring CPU contexts.
In case, one NMI or SMI happens, APs may exit from hlt state and execute the
instruction after HLT instruction. But the code under 1MB is no longer safe at
that time.
This fix is to allocate one ACPI NVS range to place the AP hlt-loop code. When
CPU finished restoration CPU contexts, AP will execute in this ACPI NVS range.
https://bugzilla.tianocore.org/show_bug.cgi?id=216
v2:
1. Make stack alignment per Laszlo's comment.
2. Trim whitespace at end of end.
3. Update year mark in file header.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Analyzed-by: Paolo Bonzini <pbonzini@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Currently, DxeMpLib only places APs into specified c-state in Exit Boot Service
callback function for UEFI OS boot. We need to put APs into specified c-state
for legacy OS boot also.
https://bugzilla.tianocore.org/show_bug.cgi?id=210
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Rename MpInitExitBootServicesCallback() to MpInitChangeApLoopCallback() because
it will not only be invoked on Exit Boot Service Event, but also will be invoked
on Legacy Ready To Boot Event.
https://bugzilla.tianocore.org/show_bug.cgi?id=210
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Current implementation just allocates reserve memory for AsmRelocateApLoopFunc.
It not be safe because APs will be placed into 32bit protected mode on long mode
DXE. This reserve memory must be located below 4GB memory.
This fix is to allocate < 4GB memory for AsmRelocateApLoopFunc.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: strip whitespace at EOL]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
If MaxLogicalProcessorNumber is only 1, we needn't to wake up APs at all
and needn't to register callback functions.
It could improve boot performance on single supported system.
https://bugzilla.tianocore.org/show_bug.cgi?id=204
Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Dump new stack base and size information could help developer to narrow down
stack crash issue.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This folder provides the sample build for Microcode FMP.
The DSC/FDF is to convert the Microcode binary/text to Microcode FMP.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
MicrocodeUpdate supports update Microcode region via UEFI FMP capsule.
MicrocodeUpdate SetImage() will perform the Microcode version,
ProcessorSignature/ProcessorFlag, and try to load microcode.
If and only if the Microcode is loaded successfully, and new Microcode
will be updated to system flash region.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Add NULL instance to pass build.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
This library is used to abstract microcode flash region access.
This library is consumed by a microcode capsule update module.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
It defined ImageTypeId for Microcode.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Add Microcode capsule related component to check build.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
All CpuExceptionHandlerLib library instances use nasm source files.
Cc: Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
We need to add EFIAPI for all interface service including library API.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Leo Duran <leo.duran@amd.com>
Cc: Michael Kinney <Michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <Michael.d.kinney@intel.com>
Reviewed-by: Leo Duran <leo.duran@amd.com>
GetProcessorLocation() is too generic and will conflict with the API defined in
Galileo Board Software Package v1.0.0.
This update is just to rename GetProcessorLocation() to one specific name
GetProcessorLocationByApicId().
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Leo Duran <leo.duran@amd.com>
Cc: Michael Kinney <Michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <Michael.d.kinney@intel.com>
Reviewed-by: Leo Duran <leo.duran@amd.com>
1) Remove SmmGetProcessorLocation() from PiSmmCpuDxeSmm driver.
2) Remove ExtractProcessorLocation() from MpInitLib library.
3) Add GetProcessorLocation() to BaseXApicLib and BaseXApicX2ApicLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Signed-off-by: Michael Kinney <Michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <Michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
while-loop check should not co-exist with for-loop. This should be typo when we
check-in the original code. We should keep one loop only.
This issue caused CLANG38 build failure reported by
https://tianocore.acgmultimedia.com/show_bug.cgi?id=148
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, this is ASSERT() if neither SecPlatformInformation2 nor
SecPlatformInformation PPIs are found. This is not correct. Per PI specification
both of them are optional PPI. Platform may not install them.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Revert SecPlatformInformation2 and SecPlatformInformation in two comment blocks.
And correct the words.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
In SecTemporaryRamDone(), we will build one privated GUIDed-HOB to save CPU BIST
Data and re-install SEC platform information(2) PPI. Then other PEI drivers
could get CPU BIST data from the private GUIDed-HOB by new installed PPI.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Abstract one worker function to get CPU BIST from the GUIDed-HOB. Add
SecPlatformInformationBist() and SecPlatformInformation2Bist() to invoke
GetBistFromHob(). Add in/out for parameter in function header.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Add SecBist.c and copy GetBistInfoFromPpi() and SecPlatformInformation2() from
UefiCpuPkg/CpuMpPei/CpuBist.c. And update SecMain.c, SecMain.inf and
UefiCpuPkg.dsc accordinlgy to pass build.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Build gEfiSecPlatformInformation2PpiGuid GUIDed-HOB to store all CPU BIST data
that could be used not only by SecPlatformInformation2(), but also by CPU MP Dxe
driver to get CPU BIST data.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
ProcessorInfo.ProcessorId is UINT64 type even it's valid value is UINT32. Use %x
only output the low 4 bytes and keep the high 4 bytes in stack that will be
output as the second parameter BistData. Typecast ProcessorInfo.ProcessorId to
UINT32 could make BistData output correctly.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
If CPU Bist data is not zero, we will report Status code. But there is one bug
that will report each processor's status code duplicated with NumberOfData
times. This fix is to exchange the loop order on NumberOfData and
mNumberOfProcessors. It could make sure the report status code only once for
each processor.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
if PcdAcpiS3Enable is disabled, then skip S3 related logic.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
If PcdAcpiS3Enable is disabled, then return an EFI_UNSUPPORTED
error which forces the module to be unloaded.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
In Exit Boot Services callback function, we cannot use allocate memory services
because it may change the memory map that has been gotten by OS.
This fix is not to allocate reset vector buffer after SaveRestoreFlag is set to
TRUE in MpInitExitBootServicesCallback(). Instead AllocateResetVector() will use
the previous allocated buffer address and save the contents before copying reset
vector code. At the same time, FreeResetVector() will restore original contents
after if SaveRestoreFlag is TRUE.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Just move BackupAndPrepareWakeupBuffer() and RestoreWakeupBuffer() from
PeiMpLib.c to MpLib.c.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
It will be used by DxePeiLib also.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In Exit Boot Services callback function, we cannot use allocate memory services
because it may change the memory map that has been gotten by OS.
This fix is to move allocating reserved memory for AP loop code to
InitMpGlobalData() and save the memory address in one global variable.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
After sending the 1st broadcast INIT-SIPI-SIPI, BSP will collect APs count after
one specified timeout delay. However, WakupAp() will restore reset vector
immediately after sending 1st broadcast INIT-SIPI-SIPI. Some processors may not
complete executing reset vector code.
This fix is to move MicroSecondDelay() from CollectProcessorCount() to the place
that is after sending 1st broadcast INIT-SIPI-SIPI and before FreeResetVector()
in WakupAp().
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
PiSmmCpuDxeSmm driver's entry point will get some PCDs supported dynamic type.
In case those PCDs are set as DynamicHii type in platform DSC File, it implies
that EFI Variable Arch protocol is required.
This fix is to add gEfiVariableArchProtocolGuid dependency on PiSmmCpuDxeSmm
driver to make sure those DynamicHii PCDs could be read correctly.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
v5:
If PcdCpuMaxLogicalProcessorNumber is set to 1 on UP system,
MpInitLibInitialize() will be invoked. This is one bug, we need to
call MpInitLibInitialize() always and get the BSP information.
Just to remove PcdCpuMaxLogicalProcessorNumber() consuming from this
driver.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Consume MP Initialize library to produce CPU MP Protocol services to simply the
code.
v4:
1. Update CpuDxe.c file header to mention it produces CPU Arch protocol.
2. Update BistData type from UINT32 to EFI_HEALTH_FLAG.
3. Move some header location from CpuMp.h to CpuDxe.h.
v3:
1. Move the code Consume MpInitLib APIs to produce CPU MP Protocol from patch
#40 to this patch.
2. Add DxeMpInitLib.inf in DSC file
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Consume MP initialize library to produce CPU MP PPI, it could simply the code.
Add STATIC for some internal functions to avoid build issue with the same
functions name in PeiMpInit instance. They will be removed by the next patch.
v4:
1. Update BistData type from UINT32 to EFI_HEALTH_FLAGS.
v3:
1. Rename MpInitLibSwitchBSP to MpInitLibSwitchBSP
2. Add PeiMpInitLib.inf in DSC file
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Register Exit Boot Service callback function MpInitExitBootServicesCallback() to
place AP one safe loop before hand-off to OS.
Allocated one reserved memory and copy the AsmRellocateApLoop() code into it. It
could avoid the CPU Dxe driver (located in Boot Service data range) crashed
after Exit Boot Service event.
Place AP into the target Cx-State (specified by PcdCpuApTargetCstate) could save
power if Monitor-mwait feature supported.
In long mode, switch AP into protected mode could let AP not require page table
when executing this safe loop. Page Table (located in Boot Service data range)
may crashed after Exit Boot Service event.
v3:
1. Rename *RellocateAp* to *RelocateAp*
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
v4:
1. Simply the internal function StartupAllAPsWorker()'s function
header due to it is duplicated with MpInitLibStartupAllAPs().
v3:
1. Use CamelCase for mStopCheckAllApsStatus and
CheckAndUpdateApsStatus()
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Laszlo Ersek
Jeff Fan
Jiewen Yao
Michael Kinney
Liming Gao
Leo Duran
Gary Lin
Star Zeng