Crypto in serveral case will use old version or latest version,
Platform may choose to only update Crypto drivers without updating
whole UPL, in this case the Crypto driver will provide by platform
payload outside the common UPL binary.
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: Gua Guo <gua.guo@intel.com>
The IMD entry uses the 32bit start field as relative offset
to root. On Ia32X64 this works fine as UINTN is also 32 bit and
negative relative offsets are properly calculated due to an
integer overflow.
On X64 this doesn't work as UINTN is 64 bit and the offset
is no longer subtracted, but it's added to the root. Fix that
by sign extending the start field to 64 bit.
Test: Booting UefiPayloadPkg still works on Ia32X64 and now also
works on X64.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4166
Fix integer overflow in various CreateHob instances.
Fixes: CVE-2022-36765
The CreateHob() function aligns the requested size to 8
performing the following operation:
```
HobLength = (UINT16)((HobLength + 0x7) & (~0x7));
```
No checks are performed to ensure this value doesn't
overflow, and could lead to CreateHob() returning a smaller
HOB than requested, which could lead to OOB HOB accesses.
Reported-by: Marc Beatove <mbeatove@google.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Cc: John Mathew <john.mathews@intel.com>
Authored-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gua Guo <gua.guo@intel.com>
It's too early to check the SCI enable status, which is set in the BDS
phase ususally. Remove the check from UPL.
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Add macro to enable selection of timer
- HPET: UEFI Payload will use HPET timer
- LAPIC: UEFI Payload will use local APIC timer
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: Hua Ma <hua.ma@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
This patch is to specify SmmCpuSyncLib instance for UefiPayloadPkg.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add an instance of ImagePropertiesRecordLib which will be used by the
DXE Core.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Provide Fit format for UniversalPayload, developer can use argument
"--Fit" to build UniversalPayload.fit
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: BruceX Wang <brucex.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4532
To Copy the PrebuildUplBinary to Build folder then add/replace Fvs.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: KasimX Liu <kasimx.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4347
To put UiApp.inf and BootManagerMenuApp.inf to proper FV(BDSFV)
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: MarsX Lin <marsx.lin@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4479
Add CAPSULE_SUPPORT to optionally select CapsuleLib instance,
default value is FALSE.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Signed-off-by: MarsX Lin <marsx.lin@intel.com>
Currently, have two command for pre-build binary support
1. --BuildEntryOnly: build UPL Entry file
2. --PreBuildUplBinary: build UPL binary based on UPL
And these two commands should be exclusived, shouldn't
have chance run it in the meantime.
Case1: Build UPL entry with CLANGDWARF
python UefiPayloadPkg/UniversalPayloadBuild.py --BuildEntryOnly
Case2: Use pre-built UPL entry and build other fv by VS2019
python UefiPayloadPkg/UniversalPayloadBuild.py -t VS2019 \
--PreBuildUplBinary UniversalPayload.elf
Case3: Build UPL Entry with CLANGDWARF and build other fv by VS2019
python UefiPayloadPkg/UniversalPayloadBuild.py -t VS2019
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Add CpuPageTableLib required by SecCore & CpuMpPei in UefiPayloadPkg.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
After moving BDS driver to a new FV for universal UEFI payload,
the shell boot option path is not correct since it used the BDS
FV instead of DXE FV in its device path.
This patch would find the correct FV by reading shell file.
It also removed PcdShellFile by using gUefiShellFileGuid.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Mike Maslenkin <mike.maslenkin@gmail.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4427
1. Since UART speed is slower than CPU, BIOS need to check the write
buffer is empty, to avoid overwrite the buffer content.
2. LPSS UART might disable MMIO space for Windows debug usage during
ExitBootServices event. BIOS need to avoid access the MMIO space
after ExitBootServices.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: PaytonX Hsieh <paytonx.hsieh@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4426
Use Python to replace llvm-objcopy in UniversalPayloadBuild.py.
1. AddSection32() and AddSection64(): Make a section named
<section> with the contents of <file>.
2. RemoveSection32() and RemoveSection64(): Remove <section>.
3. ReplaceFv (): remove the section before add the section
if the file exists.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Signed-off-by: BruceX Wang <brucex.wang@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4417
Since UefiPayload had supported multiple FV,
move Network.fdf.inc to new firmware volume and
add this network FV into elf file.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Signed-off-by: Linus Wu <linusx.wu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Copied values from OVMF, these are sufficient for a debug build.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
MemoryType information assists GCD with defragmenting the memory map.
When the DXE core starts, GCD adds memory descriptors for the resource
descriptors HOBs. This allocates heap space which can be reused later
as the bins by memory type. It seems memory allocation prefers low
ranges.
It seems "below 4G" is an artifact of this heap reuse. However, the
memory type information determines the DXE core's
`MinimalMemorySizeNeeded`, determining which system memory descriptor
HOB may be used by DXE. Furthermore, it's important that the memory
type information be correct, for an S4 memory map.
Therefore, follow other bootloaders, such as [MinPlatform][1], and do
this unconditionally. As of [edk2-stable202011][2], it was.
[1]: b6f9674389/Platform/Intel/MinPlatformPkg/PlatformInit/PlatformInitPei/PlatformInitPreMem.c (L164-L201)
[2]: https://github.com/tianocore/edk2/blob/edk2-stable202011/UefiPayloadPkg/BlSupportPei/BlSupportPei.c#L462-L466
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
UefiPayloadPkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4375
add '-pb' command of build bios with exist PreUniversalPayload file.
'-e' command of olny build the UniversalPayloadentry file.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: KasimX Liu <kasimx.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4386
Add additional input parameter support
--SpecRevision: user input spec version
--Revision: user input revision
--ProducerId: producer company name
1. UniversalPayloadBuild.py
2. Downgrade spec revision from 0.9 to 0.7
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: Linus Wu <linusx.wu@intel.com>
if system both exist gUefiAcpiBoardInfoGuid and rsdp,
we may need to use gUefiAcpiBoardInfoGuid as final
config to have backward support.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: James Lu <james.lu@intel.com>
Signed-off-by: Gua Guo <gua.guo@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4372
Correct MAX_LOGICAL_PROCESSORS value to 1024
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: MarsX Lin <marsx.lin@intel.com>
Because UefiCpuPkg/UefiCpuLib is merged to MdePkg/CpuLib, remove the
dependency of UefiCpuLib.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add CpuPageTableLib required by MpInitLib in UefiPayloadPkg.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4241
Since UefiPayloadPkg had supported multiple firmware volume,
remove the platform specific logic via protocol
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: Gua Guo <gua.guo@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: MarsX Lin <marsx.lin@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4193
In order to remove RTC_INDEX/RTC_TARGET from
the UplBuild macro list,change the RTC_INDEX
/RTC_TARGET type from PcdsFixedAtBuild to PcdsDynamicEx
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: KasimX Liu <kasimx.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4264
Fix debug print error level hob not save correct DebugPrintErrorlevel
Should cover the case:
Header.Length == UNIVERSAL_PAYLOAD_SIZEOF_THROUGH_FIELD ()
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: Ning Feng <ning.feng@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
This reverts commit 3f378450df, since the
commit 73ccde8 introduced CpuPageTableLib dependency which resolved
for UefiPayloadPkg need to be reverted.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4234
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4193
In order to remove RTC_INDEX/RTC_TARGET from
the UplBuild macro list,change the RTC_INDEX
/RTC_TARGET type from PcdsFixedAtBuild to PcdsDynamicEx
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: KasimX Liu <kasimx.liu@intel.com>
BDS module was moved from DXEFV to newly created BDSFV recently.
Non-universal UEFI payload doesn't support multiple FV, so it failed
to boot since BDS module could not be found.
This patch add BDS back to DXEFV when UNIVERSAL_PAYLOAD is not set.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4196
Align .upld_info with 4-byte boundary by spec
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: MarsX Lin <marsx.lin@intel.com>
Add CpuPageTableLib required by MpInitLib in UefiPayloadPkg.
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add condition to return success if mUartCount is greater
than zero in SerialPortInitialize() to avoid filling mUartInfo
with the same hob data when SerialPortInitialize() is called
multiple times. Also add proper conditions in SerialPortRead
function to read the data properly from multiple UART's.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: Kavya <k.kavyax.sravanthi@intel.com>
The following PCDs have no value in UefiPayloadPkg.dsc
and they can not pass the Ecc tool check, so assign
the default values the same as they are in *.dec file.
1. gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport
2. gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport
3. gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSuppor
4. gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize
5. gUefiCpuPkgTokenSpaceGuid.PcdCpuApInitTimeOutInMicroSeconds
6. gUefiCpuPkgTokenSpaceGuid.PcdCpuApLoopMode
7. gUefiCpuPkgTokenSpaceGuid.PcdCpuMicrocodePatchAddress
8. gUefiCpuPkgTokenSpaceGuid.PcdCpuMicrocodePatchRegionSize
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: jdzhang <jdzhang@kunluntech.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4196
Since UefiPayload had supported multiple fv,
move bdsdxe.inf to new firmware volume and
modify the script of UniversalPayloadPkgBuild.py to
support bdsdxe fv in elf file
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: MarsX Lin <marsx.lin@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4164
To support multiple FVs provided by UPL
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: MarsX Lin <marsx.lin@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4153
1.Upgrade spec revision to 0.9
2.Align .upld_info with 4-byte boundary by spec
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: VictorX Hsu <victorx.hsu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4123
VmgExitLib once was designed to provide interfaces to support #VC handler
and issue VMGEXIT instruction. After TDVF (enable TDX feature in OVMF) is
introduced, this library is updated to support #VE as well. Now the name
of VmgExitLib cannot reflect what the lib does.
This patch renames VmgExitLib to CcExitLib (Cc means Confidential
Computing). This is a simple renaming and there is no logic changes.
After renaming all the VmgExitLib related codes are updated with
CcExitLib. These changes are in OvmfPkg/UefiCpuPkg/UefiPayloadPkg.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4136
System will depend on Boot Mode value to do different behavior
Update during Capsule Update process. So UPL need to support
update boot mode.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: VictorX Hsu <victorx.hsu@intel.com>
REF : https://bugzilla.tianocore.org/show_bug.cgi?id=4096
TDES and ARC4 services are deprecated so set it as disable.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Signed-off-by: Gua Guo <gua.guo@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4071
Provide a wrapper to wrap UniversalPayloadBuild.py
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Signed-off-by: VictorX Hsu <victorx.hsu@intel.com>
Fix the gcc build warning:
variable PldInfo set but not used [-Wunused-but-set-variable]
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Let DxeMain.inf consume new SerialPortLib to support multiple
channel debug message on early DXE if the macro
MULTIPLE_DEBUG_PORT_SUPPORT is TRUE.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: Kavya <k.kavyax.sravanthi@intel.com>
Add new Serial port library instance that consumes the HOB defined
in MdeModulePkg/Include/UniversalPayload/SerialPortInfo.h to support
multiple UART's.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: Kavya <k.kavyax.sravanthi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4030
For the system support the Capsule function in UPL,
we replace the libraries for the Capsule driver.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: KasimX Liu <kasimx.liu@intel.com>
Return PciRootBridges instead of NULL and set
PcdPciDisableBusEnumeration to FALSE when
root bridge count is zero.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: Kavya <k.kavyax.sravanthi@intel.com>
Remove clearing CR0.WP when marking the memory used for page table
as read-only in the page table itself created by UefiPayloadEntry.
This page table address is written to Cr3 after these protection
steps. Till this, the memory used for page table is always RW.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Ray Ni <ray.ni@intel.com>
If the boot logo is enabled, this will allow edk2 to pass the logo
to the OS via ACPI.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Add a macro called BOOTSPLASH_IMAGE, which when enabled, will
display a logo at boot time.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Writes TianoCore debug logs into the CBMEM console ringbuffer, from
where the user can retrieve them with the `cbmem` userspace utility.
The intention is to aid in debugging non-fatal issues even in release
builds, or simply make TianoCore's logs available to those interested.
Consequently, MDEPKG_NDEBUG must be masked. As an in-memory debug
logging library, ASSERTs must be non-fatal to be seen, so they neither
dead-loop nor create a breakpoint. It is assumed that ASSERT() neither
enforces fatal conditions nor security integrity, as release builds do
not call DebugAssert() from the ASSERT macro.
More detailed debug logs are produced with the DEBUG_CODE macro, but
this guards other debug-related code throughout the codebase. To avoid
changing behaviour on release builds, this is only set for debug builds.
Tested on QEMU, dumping the appropriate memory region in the UEFI shell
shows the TianoCore log. An improved revision of the debug library used
in several coreboot-related EDK2 forks, including MrChromebox's.
Previous revisions also tested on an Acer Aspire VN7-572G laptop.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3984
Under function RolocateElfDynamic() in Elf32Lib.c
if (RelaAddress == MAX_UINT64) is always FALSE while RelaAddress is UINT32
Fix is to modify if condition check to "if (RelaAddress == MAX_UINT32)"
Cc: Ray Ni <ray.ni@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: James Lu <james.lu@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
REF : https://bugzilla.tianocore.org/show_bug.cgi?id=4006
Add CRYPTO_PROTOCOL_SUPPORT to decide CryptoDxe built into UPL.efi
If CRYPTO_PROTOCOL_SUPPORT is true, BIOS will use crypto protocol
instead of building OpensslLib into drivers.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: PaytonX Hsieh <paytonx.hsieh@intel.com>
Add 4 spaces before the boot prompt "F2 or Down..." so that the
spacing is equadistant from the top, which is spaced with a `\n`,
and the left.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Guo Dong <guo.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3979
Add CryptoDxe into UPL.
Drviers can locate protocol instead of building openssl lib into drivers.
This can reduce the binary size that UPL required.
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: PaytonX Hsieh <paytonx.hsieh@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3963
Based on UPL spec 2.12.2. Universal Payload Information Section,
it defines item "Attribute" on UPLD_INFO_HEADER for Debug build
should be "1", and Release build should be "0".
Currently, The value of item "Attribute" is always "0"
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: James Lu <james.lu@intel.com>
Signed-off-by: Gua Guo <gua.guo@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3960
Currently, UniversalPayloadBuild.py don't have support
python3.6, we use python3.6 will encounter f"" failure
use the change to fix it to support python3.6/3.7/3.8.
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: KasimX Liu <kasimx.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3955
Currently, UPL freezed all PCD and only known UPL hob can hook DXE
Drivers behavior, add optional feature on UniversalPayloadBuild.py to
have another way to hook PCD value.
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: : Ray Ni <ray.ni@intel.com>
Signed-off-by: Gua Guo <gua.guo@intel.com>
We observed page fault in the following situation:
1.PayloadEntry uses 2M entry in page table to cover DXE stack range.
2.In DXE phase, image protection code needs to mark some sub-range in
this 2M entry as readonly. So the the 2M page table entry is split to
512 4K entries, and some of the entries are marked as readonly.
(the entries covering stack still remain R/W)
3.Page fault exception happens when trying to access stack.
Always split the page table entry to 4K if it covers stack to avoid this
issue.
More discussion about this issue can be seen at below link
https://edk2.groups.io/g/devel/topic/91446026
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
The maximum Unicode string could be as large as 1800000 in certain
platforms when HII code builds the configuration strings.
This causes assertion in PrintLib.
The patch increases the PcdMaximumUnicodeStringLength to 1800000 to
avoid the assertion.
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3933
URL: https://universalpayload.github.io/documentation/
1. Currently, SpecRevision on USF spec is 0.7. Change to align it.
2. SpecRevision is not be patched into UniversalPayloadInfo.bin due to
different structure item name. Change item name from "HeaderRevision"
to "SpecRevision" to check the correct value can be patched.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Gua Guo <gua.guo@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3479
Adds an instance of VariableFlashInfoLib to the platform build as
it is a new library class introduced in MdeModulePkg.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Some ConIn or ConOut device may not in the first root bridge, so connect all
root bridge before detect ConIn and ConOut device.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Current code follow some rules to check if the PCI device connected to a
serial port device, but some platform or hardware doesn't follow such rule.
By locating gEfiSerialIoProtocolGuid protocol, we can find the related
device path.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
A little overdesign about VisitAllPciInstances function, since there are
two call back functions. Simplify the code logic by combining the two call
back functions, and unused parameters.
Change the PROTOCOL_INSTANCE_CALLBACK to SIMPLE_PROTOCOL_INSTANCE_CALLBACK
because the former is also defined in OvmfPkg. Rename it to avoid confusion.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Add double quotes to LlvmObjcopyPath.
Blank space in LlvmObjcopyPath will cause build failure.
This build failure is introduced by 2306555bf9 (
"UefiPayloadPkg: Fix IA32 entry build failure").
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
There are two libraries: MdePkg/CpuLib and UefiCpuPkg/UefiCpuLib and
UefiCpuPkg/UefiCpuLib will be merged to MdePkg/CpuLib. To avoid build
failure, add CpuLib dependency to all modules that depend on UefiCpuLib.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add definition for UNIVERSAL_PAYLOAD_COMMAND_LINE Hob.
This Hob is used to pass command Line to Payload.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
The ObjCopyFlag and EntryOutputDir need to be modified when
building IA32 UniversalPayload Entry
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
When Quite parameter is not provided, its default value would
be "None" instead of "". So update its default value not to
impact the build.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Acked-by: Dun Tan <dun.tan@intel.com>
REF? https://bugzilla.tianocore.org/show_bug.cgi?id=3882
UefiCpuPkg define a new Protocol with the new services
SmmWaitForAllProcessor(), which can be used by SMI handler
to optionally wait for other APs to complete SMM rendezvous in
relaxed AP mode.
VariableSmm driver need use SmmCpuRendezvousLib, So add
SmmCpuRendezvousLib dependency in UefiPayloadPkg which use
VariableSmm driver.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Zhihao Li <zhihao.li@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
The payload entry module should support to build as IA32 image
beside X64 image so that it could work with 32bit bootloaders.
This patch adds a option build parameter for arch selection.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Don't assume a 64bit register always holds an address greater than 4GB.
Check the value in the register and decide which Aperature it should be
assigned to.
Fixes assertion
"ASSERT [PciHostBridgeDxe] Bridge->MemAbove4G.Base >= 0x0000000100000000ULL".
Tested with coreboot as bootloader on platforms that have PCI resource
above 4GiB and on platforms that don't have resource above 4GiB.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Change the DebugPrintErrorLevelLib instance in UefiPayloadPkg.dsc to
allow bootloader to config DebugPrintErrorLevel.
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
1. Use PeiDxeDebugLibReportStatusCode library for DebugLib, and add
ReportStatusCodeLib.
2. Remove gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize
overrided in UefiPayloadPkg.dsc.
3. Change PcdHardwareErrorRecordLevel to 1
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
It consumes the HOB defined in
UefiPayloadPkg/Include/Guid/DebugPrintErrorLevel.h, and allow bootloader
to config DebugPrintErrorLevel.
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
This fixes an issue where the framebuffer provided by coreboot or
slimbootloader will only work on the primary VGA device. If the
framebuffer corresponds to a different device the screen will stay black.
In addition, the code doesn't work for multiple graphic cards, has
reference to non existing functions, and is a duplication of common code.
Call EfiBootManagerConnectVideoController on every display device found,
not only the legacy VGA device. This is the same as OvmfPkg does.
Allows to display output on the framebuffer set up by firmware, which might
not be the VGA device.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
On modern platforms with TBT devices the coreboot resource allocator
opens large PCI bridge MMIO windows above 4GiB to place hotplugable
PCI BARs there as they won't fit below 4GiB. In addition modern
GPGPU devices have very big PCI bars that doesn't fit below 4GiB.
The PciHostBridgeLib made lots of assumptions about the coreboot
resource allocator that were not verified at runtime and are no
longer true.
Remove all of the 'coreboot specific' code and implement the same
logic as OvmfPkg's ScanForRootBridges.
Fixes assertion
"ASSERT [PciHostBridgeDxe] Bridge->Mem.Limit < 0x0000000100000000ULL".
Tested with coreboot as bootloader on platforms that have PCI resources
above 4GiB and on platforms that don't have resources above 4GiB.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
On windows build, need add "-DPLATFORMX64_ENABLE=TRUE" in the build
command line beside -DNETWORK_DRIVER_ENABLE=TRUE in order build
network features. So update DSC to set PLATFORMX64_ENABLE to TRUE
when building network feature.
On Linux build, DSC file should not have PcdAllowHttpConnections
without building network feature, else it would cause build error.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by Sean Rhodes <sean@starlabs.systems>
Remove a duplicated entry to fix a CI error.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Dun Tan <dun.tan@intel.com>
Hook SD_MMC_TIMEOUT build option to SdMmcGenericTimeoutValue PCD.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Provide a build option to use [Esc] instead of [F2] for devices
such as Chromebooks that don't have F-keys.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Fix case match in <Protocol/MpService.h> to avoid build failure on
Linux.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Guo Dong <guo.dong@intel.com>
When build option ABOVE_4G_MEMORY is set to true, nothing will change
and EDKII will use all available memory.
Setting it to false will create memory type information HOB in
payload entry, so that EDKII will reserve enough memory below 4G
for EDKII modules. This option is useful for bootloaders that are not
fully 64-bit aware such as Qubes R4.0.4 bootloader, Zorin and Proxmox.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3818
It will have some potential issue when memory larger than 2G because
the high memory address will be fill with 0xFFFFFFFF when do the
operation of INTN + INT64 but it is 32 bit normal data in fact.
Should use same data type INT64 + INT64.
V3:
1. Use INT64 as input parameter because all date type is 64 bit
V2:
1. Force the data type to UINTN to avoid high dword be filled with
0xFFFFFFFF
2. Keep INTN because the offset may postive or negative.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Current, a macro CPU_TIMER_LIB_ENABLE is added to determine which timerlib
is used. BaseCpuTimerLib.inf is a better way and only fit for recent CPU.
Meanwhile, Universal Payload are only aimed to work with recent CPU.
Therefore, for Universal Payload, use the BaseCpuTimerLib by default
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
For recent X86 CPU, 0x15 CPUID instruction will return Time Stamp
Counter. This is recommended way to get the time, and also how
BaseCpuTimerLib works However, some CPU doesn't support this feature,
so disable it by default.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Chanage the name "Uiapp" to "Enter Setup".
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Gua Guo
Patrick Rudolph
Gang Chen
Hua Ma
Jiaxin Wu
Taylor Beebe
BruceX Wang
KasimX Liu
MarsX Lin
Guo Dong
PaytonX Hsieh
Linus Wu
Sean Rhodes
Benjamin Doron
Rebecca Cran
Yu Pu
Xie, Yuanhao
Ning Feng
Kavya
jdzhang
VictorX Hsu
Min M Xu
James Lu
Dun Tan
Liu, Zhiguang
Michael Kubacki
Li, Zhihao
Lean Sheng Tan
Akihiko Odaki
Guomin Jiang