Commit e59db6a732
* MdeModulePkg/UsbMass: Merge UsbBoot(Read|Write)Blocks(16)
introduces a bug that causes writing to USB key always fails.
When that patch is verified, only reading was verified.
The root cause is when the writing operation is performed,
the data direction EfiUsbDataIn is wrongly used. Instead, it
should be EfiUsbDataOut.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
UsbBootReadWriteBlocks() and UsbBootReadWriteBlocks16() use a UINT16
local variable to hold the value of
USB_BOOT_MAX_CARRY_SIZE (=0x10000) / BlockSize.
When BlockSize is 1, the UINT16 local variable is set to 0x10000
but the high-16 bits are truncated resulting the final value be 0.
It causes the while-loop in the two functions accesses 0 block in
each loop, resulting the loop never ends.
The patch fixes the two functions to make sure no integer overflow
happens.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The change doesn't have functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Booting from USB may fail while the macro USB_BOOT_IO_BLOCKS
set to 128 because the block size of some USB devices are exceeded
512, like some virtual CD-ROM from BMC, the block size is 2048.
So,the count blocks to transfer should be calculated by block
size of the USB devices.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
When a USB device reports failure for a CMD and REQUEST SENSE returns
Media Changed key, UsbBootExecCmdWithRetry() stops to retry CMD and
returns EFI_MEDIA_CHANGED to caller.
For this case, the CMD should be retried until success, getting
NoMedia sense key or timeout.
The patch updates UsbBootExecCmdWithRetry() to follow the above
rule so EFI_MEDIA_CHANGED is no longer returned.
UsbBootDetectMedia() is updated accordingly.
Because UsbBootGetParams() is called for new plugged USB storage,
and some USB storage devices may report Media Changed key,
UsbBootGetParams() is updated to treat it as a Success.
This change could fix the issue that some USB storage devices
cannot be detected.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This reverts commit a662afb5b0.
* MdeModulePkg/UsbStorage: Fix "map -r" cannot detect media change
The above commit fixed the following issue:
When system boots to Shell without CDROM inside USB CDROM drive,
and then user inserts the CDROM with Eltorito file system,
"map -r" cannot show the new ELtorito file system.
The commit caused EFI_MEDIA_CHANGED status returned from
UsbBootDetectMedia().
But that fix exposes another issue:
When issuing ReadCapacity command to certain USB key
(Kingston DataTraveler G3 8GB) after it's hot-plugged, USB device
returns STALL error and RequestSense command returns media changed
sense data. (Most of the USB keys return SUCCESS for ReadCapacity
command after hot-plug.)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This reverts commit 6461344c31.
* MdeModulePkg/UsbMass: Fix hot-plug USB CDROM can't be recognized
UsbBootExecCmd() only calls UsbBootRequestSense() to get sense key
when CMD fails.
When POWER ON (29h) ASC returns from REQUEST SENSE, implementation
should retry the CMD, instead of treating this as a SUCCESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In below calling stack:
UsbBootIsUnitReady()
UsbBootExecCmdWithRetry()
UsbBootExecCmd()
UsbBootRequestSense()
When USB CDROM is hot-plugged, UsbBootRequestSense() retrieves sense
key (6 = UnitAttention), additional sense code (29h = Power ON).
But it wrongly maps such sense data to Device Error status.
It causes UsbBootExecCmd() executed again.
In the second time call to UsbBootExecCmd(), UsbBootRequestSense()
retrieves sense key (6 = UnitAttention), additional sense code
(28h = media changed).
The above analysis explains why hot-plug USB CDROM cannot be
recognized after below commit:
SHA1 a662afb5b0
* MdeModulePkg/UsbStorage: Fix "map -r" cannot detect media change,
which removes the media changed status check in UsbBootDetectMedia().
The proper fix to this problem is to map the ASC (additional sense
code 29h) properly to success status so that no second call to
UsbBootExecCmd() is made.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
When system boots to Shell without CDROM in the USB CDROM drive,
and then user inserts one CDROM with Eltorito file system,
"map -r" cannot show the the new Eltorito file system.
The root cause is when "map" command probes the media change
by calling dummy ReadBlockIo(), UsbMassStorage ReadBlockIo()
contains a bug that ignores the media change status:
UsbBootDetectMedia() ignores the EFI_MEDIA_CHANGED status
returned from UsbBootIsUnitReady(), in consequence, the
BlockIo protocol re-installation logic doesn't run.
By checking the code change history, below commit
SHA-1: 19bc852765
* remove unnecessary retry logic from usb mass storage driver.
adds the code to skip EFI_MEDIA_CHANGED status.
Talking with the original committer Tian Feng, he said the
change was just a code cleanup, not for a special bug fix.
So I revert part of the patch, only keep the change that
removes unnecessary retry logic. It can fix this bug.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=782
Update the Request Sense check for the Request Sense Key of
USB_BOOT_SENSE_UNIT_ATTENTION. For this Sense Key, the
Additional Sense Key to EFI_STATUS mappings are:
USB_BOOT_ASC_MEDIA_CHANGE -> EFI_MEDIA_CHANGE
USB_BOOT_ASC_NOT_READY -> EFI_NOT_READY
USB_BOOT_ASC_NO_MEDIA -> EFI_NOT_READY
All others -> EFI_DEVICE_ERROR
A USB flash drive is returning Request Sense Key of
USB_BOOT_SENSE_UNIT_ATTENTION and an Additional Sense Key of
USB_BOOT_ASC_NO_MEDIA for a few seconds before returning an
Additional Sense Key of USB_BOOT_ASC_MEDIA_CHANGE.
The current logic treats this initial Request Sense info as an
error and reties the command 5 times before failing completely.
With this change the USB Flash Drive works correctly.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=766
Update logic to not return an error from UsbBootRequestSense()
if a Request Sense command responds with no sense information.
It is legal for a USB mass storage device to respond to a
Request Sense command with a SenseKey of
USB_BOOT_SENSE_NO_SENSE and an Additional Sense
Code of USB_BOOT_ASC_NO_ADDITIONAL_SENSE_INFORMATION.
This is described in Section 3.3 of the Universal Serial
Bus Mass Storage Specification For Bootability:
http://www.usb.org/developers/docs/devclass_docs/usb_msc_boot_1.0.pdf
The previous logic returned an error of EFI_NO_RESPONSE
and this caused USB mass storage devices such as a USB
floppy drive to not be detected.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch is used to revert changes done in commit 17f3e942
bc527fbd75068d2d5752b6af54917487 - "MdeModulePkg/UsbMass: Not
retry if usb bot transfer execution fail"
It's because Usb Floppy will report DEVICE_ERROR for the first
several cmds when it need spin up. so retry logic makes sense.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The retry mechanism will bring issue if the usb device is unplugged
from XHCI HC but s/w is trying to access it through BlockIo. The
current cmd will get device error return status, but the sequential
cmds will be timeout. This behavior will cause system unresponsive
for a long while and bring bad user experience.
So we break the retry loop if found device error.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
1) Fix a bug on missing hub context evaluation operation.
2) If the usb keyboard device configuration has been set successfully, then don’t set configuration again.
Signed-off-by: erictian
Reviewed-by: li-elvin
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13087 6f19259b-4bc3-4df7-8a09-765794883524
GCC 4.6 generates a warning when a variable is set,
but never used.
Signed-off-by: jljusten
Reviewed-by: lgao4
Reviewed-by: erictian
Reviewed-by: rsun3
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12617 6f19259b-4bc3-4df7-8a09-765794883524
Root cause is that Read Capacity command returns media not present error, then UsbMassStorage driver issues Sense Request command to get the sense data. However, the USB floppy drive still returns the previous error for the Sense Request command. UsbBootRequestSense() does not handle this case correctly and returns EFI_SUCCESS so that the block size of the Block IO protocol instance is set to be 0.
Solution is to fix the logic to handle the case and add protective logic to avoid setting block size to be 0.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8979 6f19259b-4bc3-4df7-8a09-765794883524
Michael D Kinney
Ruiyu Ni
Liming Gao
Ming Huang
Feng Tian
Gary Lin
erictian
jljusten
ydong10
hhtian
rsun3
eric_tian
xli24
jji4
vanjeff
yshang1