For eMMC modules we used to notify the platform about frequency
change only after sending CMD13 which meant that platform
might not get a chance to apply required post frequency
change fixes to get the clock stable. To fix this
notification has been moved to SdMmcHcClockSupply function
just after we start the SD clock. During first time setup
the notification won't be sent to avoid changing old behavior.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2388
Token is new introduced by MM MP Protocol. Current logic allocate Token
every time when need to use it. The logic caused SMI latency raised to
very high. Update logic to allocate Token buffer at driver's entry point.
Later use the token from the allocated token buffer. Only when all the
buffer have been used, then need to allocate new buffer.
Former change (9caaa79dd7) missed
PROCEDURE_TOKEN part, this change covers it.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Add PS2 keyboard support.
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2316
This patch adds PS2 keyboard support in boot manager, and
add a build flag PS2_KEYBOARD_ENABLE for PS2 keyboard to
build PS2 keyboard driver and SIO driver. Be default the
build flag is not enabled since PS2 keyboard is not common
used. could use -DPS2_KEYBOARD_ENABLE to enable build it
if need this feature.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Previous commits have introduced below fields in structure CPU_AP_DATA:
UINT32 ProcessorSignature;
UINT8 PlatformId;
UINT64 MicrocodeEntryAddr;
which store the information of:
A. CPUID
B. Platform ID
C. Detected microcode patch entry address (including the microcode patch
header)
for each processor within system.
Therefore, the below fields in structure CPU_MP_DATA:
UINT32 ProcessorSignature;
UINT32 ProcessorFlags;
UINT64 MicrocodeDataAddress;
UINT32 MicrocodeRevision;
which store the BSP's information of:
A. CPUID
B. Platform ID
C. The address and revision of detected microcode patch
are redundant and can be removed.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The below 2 microcode patch related fields in structure CPU_MP_DATA:
UINT64 MicrocodePatchAddress;
UINT64 MicrocodePatchRegionSize;
They will be passed from PEI phase and be reused DXE phase.
Previously, these 2 fields were placed after some fields with type
'UINTN', this will lead to different field offset in different
architecture for them.
This commit will move them before the fields with different size in
different architecture to ensure they can be properly used in DXE phase.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2430
This commit will update the MpInitLib to:
A. Collect the base address and size information after microcode patches
being loaded into memory;
B. Collect the detected microcode patch for each processor within system;
C. Based on the collected information, produce the EDKII microcode patch
HOB.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2430
This commit will add the definitions for EDKII microcode patch HOB.
The intention of adding this HOB is to provide a scheme to store the below
information:
A. The base address and size of the microcode patches that are being
loaded (from flash) into memory;
B. The information of detected microcode patch for each processor within
the system.
The producer of the HOB will be the UefiCpuPkg/MpInitLib (where the load,
detect and apply of the microcode happen). The consumer of the HOB can be
modules that want to detect/apply the microcode patch by themselves again
later during the boot flow.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2429
This commit will attempt to reduce the copy size when loading the
microcode patches data from flash into memory.
Such optimization is done by a pre-process of the microcode patch headers
(on flash). A microcode patch will be loaded into memory only when the
below 3 criteria are met:
A. With a microcode patch header (which means the data is not padding data
between microcode patches);
B. The 'ProcessorSignature' & 'ProcessorFlags' fields in the header match
at least one processor within system;
C. If the Extended Signature Table exists in a microcode patch, the
'ProcessorSignature' & 'ProcessorFlag' fields in the table entries
match at least one processor within system.
Criterion B and C will require all the processors to be woken up once to
collect their CPUID and Platform ID information. Hence, this commit will
move the copy, detect and apply of microcode patch on BSP and APs after
all the processors have been woken up.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2429
This commit will collect the CPUID and Platform ID information for each
processor within system. They will be stored in the CPU_AP_DATA structure.
These information will be used in the next commit to decide whether a
microcode patch will be loaded into memory.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If git finds a '\r' character in the message, then it
converts the entire message content into Quoted-Printable
encoding. It appears that when groups.io converts the QP
encoding back to text format, the '\r' characters somehow
become '\n'. To workaround this, the SetupGit.py script
will now explicitly set the sendemail.transferEncoding git
config option to '8bit'
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The size for the array of mSmmMpSyncData->CpuData[] is 0 ~
mMaxNumberOfCpus -1. But current code may use
mSmmMpSyncData->CpuData[mMaxNumberOfCpus].
This patch fixed this issue.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2268
In current implementation, when check whether APs called by StartUpAllAPs
or StartUpThisAp, it checks the Tokens value used by other APs. Also the AP
will update the Token value for itself if its task finished. In this
case, the potential race condition issues happens for the tokens.
Because of this, system may trig ASSERT during cycling test.
This change enhance the code logic, add new attributes for the token to
remove the reference for the tokens belongs to other APs.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
This issue happens under two conditions.
1. Unicode language environment in Windows
2. Python2 (Not reproducible with Python3)
Step to reproduce
C:\edk2>edksetup.bat forcerebuild
The edksetup.bat stuck at 'nmake cleanall'.
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The latest TCG PFP specification (TCG PC Client Platform Firmware Profile
Specification, Revision 1.05) added new data structure. For example,
the SPDM device measurement. This patch adds the new content.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2393
CLANGPDB does not define __GNUC__, but it does define __clang__. Check
for the __clang__ preprocessor definition to use __builtin_offsetof to
implement the OFFSET_OF macro.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Alex James <theracermaster@gmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Device Control 2 Structure have an issue.
LtrMechanism - there is 2 bits instead of 1.
Signed-off-by: Daniel Pawel Banaszek <daniel.pawel.banaszek@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2395
Errors happened in the arguments parsing is not a critical error.
And it would miss the error status code in the release version of shell.
So replace the ASSERT with returning error status code while fail
parsing command-line in UpdateArgcArgv.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Linson Augustine <linson.augustine@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2311
In patch set 13c5e34a - 0c3e8e99, we implemented incremental build with
using compiler/pre-processor generate dependent header file function.
A issue is found for MSVC compiler, that the cl.exe /showIncludes
build option generate header file list to either stdout or stderr.
For .c file, the header file list is print out to stdout while for
.vfr, .aslc and .nasm file, the file list is print out to stderr.
The build tool use two threads to process the message from stdout and
stderr, but to generate correct *.deps file, build tool need to
combine the header file list from stderr and other messages from stdout
together with correct time sequence order.
So this patch is trying to combine the stdout and stderr together for
the process which is for calling make program.
The impact of this patch is that the output message of build with -q
will be changed. The compiler error message will not print out.
The build behavior of other log level setting will not be impacted.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Created new email account that will not append legal disclaimers to
my responses/patches.
Switching to NetworkPkg maintainer.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2423
That commit 13c5e34a1b introduces the first two UTF-8
characters (the quote ') in an otherwise all-ascii file.
In Conf\tools_def.template
There is tow lines of
Notes: Since this tool chain is obsolete, it doesn't enable
the compiler option for included header file list generation,
we replaces the two offending quotes by proper ascii quotes
The patch is going to fix this issue
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2371
This patch is to fix a regression issue that build fails
if multiple build targets given.
Two changes cause this regression issue.
One is AutoGen object __hash__ function only
hash file path and arch, missing ToolChain and build target.
The other is changing the multiple-thread-genfds function as default
build behavior. To generate the genffs command to Makefile, there
is a global data set is used, GenFdsGlobalVariable, which cause build
tool use the data of first build-target build in
the second build-target build.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
As per the Microsoft Debug Port Table 2 (DBG2) documentation, that
can be found online, we are missing 2 serial interface types for
Arm DCC and Bcm2835 (the latter being used with the Raspberry Pi).
These same types are present in DebugPort2Table.h so add them to
SerialPortConsoleRedirectionTable.h too.
Note that we followed the same idiosyncrasies as DebugPort2Table
for naming these new macros.
Signed-off-by: Pete Batard <pete@akeo.ie>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI defines a few architected events that have significance in the MM
context as well as in the non-secure DXE context. So register notify
handlers for these events, and relay them into the standalone MM world.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
This patch clarifies wording in several PeiCore comments to improve
reading comprehension.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1940
According to TCG PFP specification: the ACPI table must be
measured prior to any modification, and the measurement
must be same cross every boot cycle.
There is a fix 3a63c17ebc
for the HID data. However that is not enough.
The LAML/LASA and PCD configuration change may also cause
similar problem.
We need measure the table before any update.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jiewen Yao <Jiewen.Yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Redesign the binary cache and not need to save the
cache intermediate result and state in memory as a
ModuleBuildCacheIR class instance. So remove the
CacheIR.py which define the ModuleBuildCacheIR class.
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Redesign the binary cache and bases on the compiler to
output the dependency header files info for every module.
The binary cache will directly consume the dependency header
files info and doesn't parse the C source code by iteself.
Also redesign the dependency files list format for module
and try to share the common lib hash result as more as
possible in local process. Remove the unnecessary share data
access across multiprocessing.
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Enhance the CacheCopyFile method arg names to be more
clear and readable
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Binary cache use the OutputFile method to return the module
built output files needed to store in cache, but current
OutputFile implementation doesn't return complete output files.
Enhance the OutputFile method to return more complete output files.
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2311
Include dependency file in Makefile to enhance
incremental build
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2311
Enable the dependent files generation function for compilers
and Trim tool.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2311
Implement the function in Trim tool to get the included
file list for ASL and ASM file.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2311
Add /showIncludes for msvc and -MMD -MF $@.deps
for GCC and CLANG
Remove /MP for msvc since /MP does not work with
/showIncludes
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Achin has indicated that he no longer has the bandwidth available to
co-maintain StandaloneMmPkg, and has asked Sami and me to step in.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.Yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Implement a version of the EDK2 IoMmu protocol that is a simple wrapper
around DmaLib. This is intended to be used to wrap NonCoherentDmaLib so
that the generic PCI infrastructure can be used to implement support for
non cache-coherent DMA.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Pete Batard <pete@akeo.ie>
Implement support for driving peripherals with limited DMA ranges to
NonCoherentDmaLib, by adding a device address limit, and taking it,
along with the device offset, into account when allocating or mapping
DMA buffers.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Pete Batard <pete@akeo.ie>
Acked-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2388
Token is new introduced by MM MP Protocol. Current logic allocate Token
every time when need to use it. The logic caused SMI latency raised to
very high. Update logic to allocate Token buffer at driver's entry point.
Later use the token from the allocated token buffer. Only when all the
buffer have been used, then need to allocate new buffer.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2304
The following statement produces a SyntaxWarning with Python 3.8:
if str(FdRegion.RegionType) is 'FILE' and self.Platform.VpdToolGuid in \
str(FdRegion.RegionDataList):
BaseTools/Source/Python/AutoGen/WorkspaceAutoGen.py:168: SyntaxWarning: \
"is" with a literal. Did you mean "=="?
Change the 'is' operator by the conventional '==' comparator.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2304
To avoid SyntaxWarning with Python 3.8, change the 'is' operator
by the conventional '==' comparator.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Third party driver images loaded from Option ROM get queued
for execution after EndOfDxe. These queued images need to be
dispatched from the PlatformBootManagerLib.
Since the queued images were not dispatched, the PCI Option
ROM drivers were not getting loaded on Juno. Therefore,
add call to EfiBootManagerDispatchDeferredImages() for
dispatching deferred images from PlatformBootManagerLib.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1965
For function InsertNewGuidNameMapping, it rellocate the
mGuidList with new size
"mGuidListCount+1 * sizeof(GUID_INFO_BLOCK)". That isn't
its purpose and would cause a overflow operation in
"mGuidList[mGuidListCount - 1].xxx = xxx". Its purpose
is to increase 1 block size of mGuidList. Change it to
"(mGuidListCount + 1) * sizeof (GUID_INFO_BLOCK)".
Adjust the coding style of this function.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2379
When a file is saved in the edit command a status message L"%d Lines Wrote"
is displayed. The hexedit command suffers from the same typo.
Change the message to L"%d Lines Written".
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Updated IORT parser to conform to the IO Remapping
Table, Platform Design Document, Revision D, March 2018.
The following structure parsers have been updated:
1. SMMUv3 - added proximity domain and device Id
mapping index.
2. RootComplex - added memory address size limit.
2. PMCG - added page 1 support.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Add support for parsing the ACPI FACS table.
The FADT parser has also been updated as it
links the FACS table using the FIRMWARE_CTRL
or X_FIRMWARE_CTRL fields.
Since the FACS table does not follow the standard
ACPI header, the FADT parser extracts the FACS
signature, length and version fields before invoking
the FACS parser.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2382
Add ARM/Aarch64 which were missing to VALID_ARCHITECTURES
in LzmaCustomDecompressLib.inf
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
After unifying the definition of size_t, EBC compiler has failure.
So don't compile this inf file for EBC
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2398
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2400
In Dsc Parser, included dsc file is parsed always no matter
if its condition is False
gUefiOvmfPkgTokenSpaceGuid.test1|FALSE
!if gUefiOvmfPkgTokenSpaceGuid.test1 == FALSE
!include OvmfPkg/test1.dsc
!else
!include OvmfPkg/test2.dsc
!endif
The patch avoids processing redundant dsc files and improves
the way Tool handles them.
In the above case, since the conditional result is FALSE,
"test2.dsc" is not parsed.
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Albecki, Mateusz
Eric Dong
Dong, Guo
Hao A Wu
Desimone, Nathaniel L
Park, Aiden
Jiewen Yao
Alex James
Daniel Pawel Banaszek
Zhichao Gao
Bob Feng
Maciej Rabeda
Fan, Zhiju
Pete Batard
Ard Biesheuvel
Michael Kubacki
Antoine Coeur
Steven Shi
Philippe Mathieu-Daude
Sami Mujawar
Heinrich Schuchardt
Zhiguang Liu