When booting at EL2, enable VHE if available so that the early ID map
can be enabled as well. This gets rid of any memory accesses (reads or
writes) before the MMU and caches are enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The implementation of ArmMonitorLib that selects the conduit (SMC or
HVC) based on the PSCI FDT node is suitable for other VMMs as well, so
rename it more appropriately.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
QemuVirtMemInfoLib makes use of BaseLib but never declared the
dependency or included the header. The code still built by
luck and by including the EmbeddedPkg FdtLib. Which is going
away, so add the missing stanzas in preparation.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
AsmMacroIoLib.h and AsmMacroIoLibV8.h are used by the
CompilerIntrinsicsLib, which is moving to MdePkg. These
functions provide standard definitions for ARM/AARCH64
assembly code, respectively, and so are moved to the arch
directories in MdePkg to avoid MdePkg having a
dependency on ArmPkg.
Now that the files are in Arm/ and AArch64/ directories,
the filenames are changed to AsmMacroLib.h as we can
distinguish the architecture from the path.
AsmMacroIoLib.inc is unused and so is removed.
Continuous-integration-options: PatchCheck.ignore-multi-package
Signed-off-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Some of the boilerplate in ArmPlatformLib is only relevant when entering
UEFI on multiple cores, and this is no longer supported. So retire the
associated helper routines.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When cspell is installed (via `npm install cspell`), CI checks for
spelling mistakes. There are currently a very large number of them: some
are genuine mistakes while others are words or acryonyms that cspell
doesn't know.
Fix a few of the misspellings in ArmVirtPkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Retire the special ResetSystemLib implementation for the PEI phase on
virtual platforms, which has been superseded by the generic version
combined with a PEI-compatible implementation of ArmMonitorLib.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The TPM2 related PEIMs depend on ResetSystemLib too, and so in order to
be able to switch to the generic ArmPkg implementation which relies on
ArmMonitorLib, the latter library class requires a PEIM-compatible
implementation too.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Switch to the new, generic ArmPsciResetSystemLib implementation that
obtains the conduit using ArmMonitorLib, of which a version already
exists that determines the conduit by looking up the PSCI DT node.
This permits the removal of the ArmVirtPkg specific implementation of
ResetSystemLib, which essentially does the exact same thing, but in a
single library.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When setting memory attributes on its MMIO region,
KvmtoolRtcFdtClientLib will clear EFI_MEMORY_XP from
the region if a platform has it set. This MMIO region is
not intended to be executed from, so fix this by explicitly
setting EFI_MEMORY_XP on this region in the lib.
Signed-off-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Platforms today may use this PCD as a dynamic PCD as that is an
allowed type in its PCD declaration. From `ArmPkg.dec`:
[PcdsFixedAtBuild.common, PcdsDynamic.common, PcdsPatchableInModule.common]
gArmTokenSpaceGuid.PcdSystemMemorySize|0|UINT64|0x0000002A
This library causes a build error if it used as a dynamic PCD since
it places the PCD in a `[FixedPcd]` section in the INF.
Other libraries do set the PCD and depend on the dynamic PCD behavior.
Since this library accesses the PCD with `PcdGet64 ()` which is
compatible with FixedAtBuild PCDs, this change moves the PCD out an
explicit `[FixedPcd]` section to resolve the following build error:
```
INFO - : error 3000: Building modules from source INFs, following
PCD use Dynamic and FixedAtBuild access method.
It must be corrected to use only one access
method.
INFO - gArmTokenSpaceGuid.PcdSystemMemorySize
```
Signed-off-by: Oliver Smith-Denny <osde@linux.microsoft.com>
This reverts commit c98f7f7550, which is
no longer needed: the SMCCC conduit will be converted back to being
hardcoded, as PrePi based ArmVirtPkg build cannot support dynamic PCDs,
and falling back to patchable PCDs does not work either.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Whether SMCCC calls use HVC or SMC generally depends on the exception
level that the firmware executes at, but also on whether or not EL2 is
implemented.
This is almost always known at build time, which is why the default
ArmMonitorLib used to model this as a feature PCD. However, on QEMU,
things are not that simple.
However, SMCCC specifies that the conduit is the same as the one used
for PSCI calls (which has been retrofitted into SMCCC when it was
defined). Given that QEMU provides this information via the device tree,
let's use it to select the conduit, using a special ArmMonitorLib
implementation.
This also removes the need to set the associated PCD at runtime, given
that its updated value will no longer be used.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
On ARM systems, whether SMC or HVC instructions need to be used to issue
monitor calls is typically dependent on the exception level, but there
are also cases where EL1 might use SMC instructions, so there is no hard
and fast rule.
For ArmVirtQemu, this does depend strictly on the exception level, so
set the default to HVC (for EL1 execution) and override it to SMC when
booted at EL2.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Committed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Doug Flick [MSFT] <doug.edk2@gmail.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Moved the PlatformBootManagerLib to OvmfPkg and renamed to
PlatformBootManagerLibLight for easy use by other ARCH.
Build-tested only (with "ArmVirtQemu.dsc and OvmfPkgX64.dsc").
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4663
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Lazlo Ersek <lersek@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Move the PcdTerminalTypeGuidBuffer and PcdUninstallMemAttrProtocol into
OvmfPkg so other ARCH can easily use it.
Build-tested only (with "ArmVirtQemu.dsc and OvmfPkgX64.dsc").
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Move the FdtSerialPortAddressLib to Ovmfpkg so that other ARCH can
easily use it.
Build-tested only (with "ArmVirtQemu.dsc and OvmfPkgX64.dsc").
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Moved PcdDeviceTreeInitialBaseAddress and PcdDeviceTreeAllocationPadding
to OvmfPkg for easier use by other architectures.
Build-tested only (with "ArmVirtQemu.dsc").
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Shim's PE loader uses the EFI memory attributes protocol in a way that
results in an immediate crash when invoking the loaded image, unless the
base and size of its executable segment are both aligned to 4k.
If this is not the case, it will strip the memory allocation of its
executable permissions, but fail to add them back for the executable
region, resulting in non-executable code. Unfortunately, the PE loader
does not even bother invoking the protocol in this case (as it notices
the misalignment), making it very hard for system firmware to work
around this by attempting to infer the intent of the caller.
So let's introduce a QEMU command line option to indicate that the
protocol should not be exposed at all, and a PCD to set the default for
this option when it is omitted.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://gitlab.com/qemu-project/qemu/-/issues/1990
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Introduce three new DebugLib instances, forked from
MdePkg/Library/BaseDebugLibSerialPort. All three instances rely on
PL011UartLib rather than SerialPortLib so that they can customize the
PL011 UART that the debug messages are written to. All three instances
direct the debug output to the first such PL011 UART that *differs* from
the one specified in the Device Tree's /chosen node's "stdout-path"
property.
From these, DxeRuntimeDebugLibFdtPL011Uart is identical to
DebugLibFdtPL011UartRam, with the addition that UART access is permanently
disabled when the containing DXE_RUNTIME_DRIVER module is notified about
exiting boot services.
The contexts in which these DebugLib instances run are identical to those
in which the corresponding SerialPortLib instances run. The particular
original dependency chain is
DxeRuntimeDebugLibSerialPort (DXE_RUNTIME_DRIVER)
FdtPL011SerialPortLib
gEarlyPL011BaseAddressGuid
HobLib
PL011UartLib
and the new dependency chain is
DxeRuntimeDebugLibFdtPL011Uart (DXE_RUNTIME_DRIVER)
gEarlyPL011BaseAddressGuid
HobLib
PL011UartLib
The ArmVirtPkg DSC files will be switched to the new library instances in
a separate patch.
This patch is worth viewing with "git show --find-copies-harder".
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-9-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
Introduce three new DebugLib instances, forked from
MdePkg/Library/BaseDebugLibSerialPort. All three instances rely on
PL011UartLib rather than SerialPortLib so that they can customize the
PL011 UART that the debug messages are written to. All three instances
direct the debug output to the first such PL011 UART that *differs* from
the one specified in the Device Tree's /chosen node's "stdout-path"
property.
From these, DebugLibFdtPL011UartRam mirrors FdtPL011SerialPortLib: it
relies on the EarlyPL011BaseAddress GUID HOB, and initializes the UART --
a UART different from FdtPL011SerialPortLib's -- only once in the lifetime
of the containing module. Suitable for module types that can only execute
from RAM (i.e., all types different from SEC, PEI_CORE, PEIM), except
DXE_RUNTIME_DRIVER.
(Note that OVMF uses a similar set of dedicated DebugLib instances
(PlatformDebugLibIoPort) for logging to the (x86-only) isa-debugcon device
from various firmware phases.)
The contexts in which these DebugLib instances run are identical to those
in which the corresponding SerialPortLib instances run. The particular
original dependency chain is
BaseDebugLibSerialPort (not SEC, PEI_CORE, PEIM, DXE_RUNTIME_DRIVER)
FdtPL011SerialPortLib
gEarlyPL011BaseAddressGuid
HobLib
PL011UartLib
and the new dependency chain is
DebugLibFdtPL011UartRam (not SEC, PEI_CORE, PEIM, DXE_RUNTIME_DRIVER)
gEarlyPL011BaseAddressGuid
HobLib
PL011UartLib
Note that FdtPL011SerialPortLib remains in use (just not via
BaseDebugLibSerialPort); for instance by MdeModulePkg/Universal/SerialDxe,
which produces the SerialIo protocol, underlying the UEFI console.
The ArmVirtPkg DSC files will be switched to the new library instances in
a separate patch.
This patch is worth viewing with "git show --find-copies-harder".
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-8-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
Introduce three new DebugLib instances, forked from
MdePkg/Library/BaseDebugLibSerialPort. All three instances rely on
PL011UartLib rather than SerialPortLib so that they can customize the
PL011 UART that the debug messages are written to. All three instances
direct the debug output to the first such PL011 UART that *differs* from
the one specified in the Device Tree's /chosen node's "stdout-path"
property.
From these, DebugLibFdtPL011UartFlash mirrors EarlyFdtPL011SerialPortLib:
it parses the initial Device Tree, and initializes the UART -- a UART
different from EarlyFdtPL011SerialPortLib's -- for every message written.
Suitable for SEC, PEI_CORE, PEIM.
(Note that OVMF uses a similar set of dedicated DebugLib instances
(PlatformDebugLibIoPort) for logging to the (x86-only) isa-debugcon device
from various firmware phases.)
The contexts in which these DebugLib instances run are identical to those
in which the corresponding SerialPortLib instances run. The particular
original dependency chain is
BaseDebugLibSerialPort (SEC, PEI_CORE, PEIM)
EarlyFdtPL011SerialPortLib
PcdDeviceTreeInitialBaseAddress
FdtSerialPortAddressLib
PL011UartLib
and the new dependency chain is
DebugLibFdtPL011UartFlash (SEC, PEI_CORE, PEIM)
PcdDeviceTreeInitialBaseAddress
FdtSerialPortAddressLib
PL011UartLib
Note that EarlyFdtPL011SerialPortLib remains in use (just not via
BaseDebugLibSerialPort), namely for direct SerialPortLib calls from SEC,
PEI_CORE, PEIM. See for example commit 56035d1c8b
("ArmPlatformPkg/PrePeiCore: Print the firmware version early in boot",
2022-10-25).
The ArmVirtPkg DSC files will be switched to the new library instances in
a separate patch.
This patch is worth viewing with "git show --find-copies-harder".
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-7-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
PlatformPeiLib produces the EarlyPL011BaseAddress GUID HOB, and
FdtPL011SerialPortLib consumes it. Extend the HOB such that it also carry
the base address of the PL011 UART meant for DebugLib usage -- namely the
first UART that is *not* designated by the /chosen node's "stdout-path"
property. Implement this policy in PlatformPeiLib.
Note that as far as the SerialPortLib+console UART is concerned, this
patch makes no difference. That selection remains consistent with the
pre-patch state, and therefore consistent with EarlyFdtPL011SerialPortLib.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-6-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
Convert both EarlyFdtPL011SerialPortLib and PlatformPeiLib at the same
time to clients of FdtSerialPortAddressLib (so that both "early" and
"late" serial output continue going to a common serial port). If the
device tree specifies just one serial port, this conversion makes no
difference, but if there are multiple ports, the output is written to the
port identified by /chosen "stdout-path".
In this patch, DebugLib output is not separated yet from the UEFI console.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-5-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
I strongly dislike when *small* local variable declaration changes are
muddled by whitespace changes. When that happens, a reviewer can choose
from two suboptimal options: display the patch with "git show -b", which
creates confusion in *other* parts of the patch, or display the patch with
just "git show", which then produces an unjustifiedly large hunk for the
sequence of declarations.
For avoiding that in subsequent patches, adjust some whitespace in this
patch in isolation. Functionally this is a no-op; "git show -b" produces
empty output.
Note that uncrustify is (of course) unhappy with this patch, but that's
fine -- this patch is in the middle of a series, and by the end of the
series (which is where uncrustify is run in CI) the whitespace is going to
be tight.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-4-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
This is only a refactoring; the patch is not supposed to cause any
observable change.
Build-tested only (with "ArmVirtKvmTool.dsc").
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-3-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
Introduce a new library class + instance for:
- collecting serial port base addresses from the device tree,
- collecting the /chosen stdout-path serial port base address from the
device tree.
The logic is loosely based on the following functions:
- SerialPortGetBaseAddress()
[ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c]
- PlatformPeim() [ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c]
- GetSerialConsolePortAddress()
[ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c]
which are going to be converted to clients of the new library later.
Copyright notices from those other files are preserved.
The new library fixes the following warts, found by reading the existent
code:
- Neither of the three functions check whether the "reg" property exists.
(This may be implicitly checked when they compare the property size to
16.)
- GetSerialConsolePortAddress() uses ScanMem8() for locating a colon (":")
node path separator in "stdout-path", when AsciiStrStr() could work just
as fine. While ScanMem8() is likely faster, "stdout-path" is presumably
very short, and ScanMem8() introduces an extra lib class dependency
(namely BaseMemoryLib).
- If ScanMem8() fails to locate a colon in "stdout-path", then
GetSerialConsolePortAddress() re-measures the length of the whole
"stdout-path" property. This is conceptually (if not performance-wise)
disturbing, because we know the whole size of the "stdout-path" property
from the property lookup just before, so we only need to subtract the
NUL-terminator for learning the length.
- GetSerialConsolePortAddress() does not check if the first (or only) node
path inside the "stdout-path" property is empty. (Not a big deal, the
subsequent alias resolution should simply fail.)
- GetSerialConsolePortAddress() does not verify if the node path retrieved
(and potentially alias-resolved) from "stdout-path" can be located in
the device tree; it assumes it.
- Code is duplicated (of course) between SerialPortGetBaseAddress() and
PlatformPeim(), but more surprisingly, all three functions embed the
same code for verifying the "status" property of the serial port node,
and for checking and reading its "reg" property.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-2-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
FdtPL011SerialPortLib claims that it's usable from the DXE_CORE. That's
not correct: the DXE_CORE calls DEBUG() and ASSERT() before it calls
ProcessLibraryConstructorList(). Via the BaseDebugLibSerialPort instance,
those DEBUG() and ASSERT() calls result in SerialPortWrite() calls, before
ProcessLibraryConstructorList() called either our constructor
FdtPL011SerialPortLibInitialize(), or BaseDebugLibSerialPortConstructor().
(And even if the DXE_CORE called the latter function early enough, it
would just invoke our SerialPortInitialize() function -- which does
nothing.)
This means that the earliest DXE_CORE debug messages are lost.
Rename FdtPL011SerialPortLibInitialize() to SerialPortInitialize(), so
that the same initialization occur through the constructor and the public
SerialPortInitialize() library API.
Turn SerialPortInitialize() calls after the first one into no-ops.
Our SerialPortLib APIs already use (mSerialBaseAddress != 0) to track
initialization. Rework those checks to actually initialize the library if
that hasn't happened yet.
The following new lines appear in the log:
> CoreInitializeMemoryServices:
> BaseAddress - 0x48000000 Length - 0xF8000000 MinimalMemorySizeNeeded - 0x38C8000
> InstallProtocolInterface: [EfiLoadedImageProtocol] 46EFC3E0
> ProtectUefiImageCommon - 0x46EFC3E0
> - 0x0000000046EB2000 - 0x0000000000068000
(0x46EB2000 is the load address of the DXE Core.)
Reported-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
FEAT_VHE, introduced in ARMv8.1, adds a virtual EL2 timer.
However, this library verifies that exactly 3 or 4 12-byte timer
interrupts are provided in input DT, ASSERTing when the new timer
is added.
Change the assert to >= 36.
Extend the current logic, also initializing PcdArmArchTimerHypVirtIntrNum
if 5 interrupts are provided.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
In case a virtio serial device is found in the system register the first
console port as EFI console, by updating ConIn, ConOut and ErrOut.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
IsVirtioPciRng() becomes just a thin wrapper for IsVirtioPci().
This allows to add similar thin wrappers for other virtio
devices in the future.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
IsVirtioRng() becomes just a thin wrapper for IsVirtio().
This allows to add similar thin wrappers for other virtio
devices in the future.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Map the code flash with read-only attributes so we can execute from it
even under a memory protection regime that enables WXN, making all
writable memory regions non-executable by default.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
The kvmtool option '--flash <flash filename>' is used to launch
a guests VM with a CFI flash device that maps the flash file
specified at the command line.
However, kvmtool allows guest VMs to be launched without a CFI
flash device. In such scenarios the firmware can utilize the
emulated variable storage for UEFI variables. To support this
the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvModeEnable
must be set to TRUE.
Therefore, update the NorFlashKvmtoolLib to fallback to variable
emulation if a CFI device is not detected. Also improve the error
logging.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
ArmVirtPkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The IdMap.S asm source file has not executable content, but its lack of
a BTI annotation prevents the linker from marking any executables it
emits as BTI compatible if this object is part of the build. So add the
BTI note by hand.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The Rtc library for the kvmtool guest firmware configures the
RTC controller address range as runtime memory by calling the
gDS->SetMemorySpaceAttributes().
The SetMemorySpaceAttributes() function has a dependency on
the CPU Arch Protocol. If the CPU Arch Protocol is not
installed the call to set the memory attributes fails with
error code EFI_NOT_AVAILABLE_YET.
Therefore, set the library dependency on the CPU Arch protocol.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
When scanning for the Serial Port in the device
tree, the length and value parameters to ScanMem8()
are not in the right order. This results in the
serial port not being detected if the chosen node
in the device tree has additional elements.
Therefore, pass the parameters to ScanMem8() in the
correct order to fix this issue.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
The initial ID map used by ArmVirtQemu only covers 2 MiB of NOR flash,
while the NOOPT build can be up to 3 MiB in size, resulting in a crash
if the unmapped 1 MiB is accessed before the real page tables are up.
So increate the initial flash mapping to 4 MiB.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The early ID map used by ArmVirtQemu uses ASID scoped non-global
mappings, as this allows us to switch to the permanent ID map seamlessly
without the need for explicit TLB maintenance.
However, this triggers a known erratum on ThunderX, which does not
tolerate non-global mappings that are executable at EL1, as this appears
to result in I-cache corruption. (Linux disables the KPTI based Meltdown
mitigation on ThunderX for the same reason)
So work around this, by detecting the CPU implementor and part number,
and proceeding without the early ID map if a ThunderX CPU is detected.
Note that this requires the C code to be built with strict alignment
again, as we may end up executing it with the MMU and caches off.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Now that we build the early code without strict alignment and without
suppressing the use of SIMD registers, ensure that the VFP unit is on
before entering C code.
While at it, simplyify the mov_i macro, which is only used for 32-bit
quantities.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: dann frazier <dann.frazier@canonical.com>
Migrate to the virt specific NOR flash driver as the ArmPlatformPkg is
going away.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Switch to the virt specific NorFlashDxe driver implementation that was
added recently.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Due to the way we inherited the formerly fixed PCDs to describe the
system memory base and size from ArmPlatformPkg, we ended up with a
MemoryInit PEIM that relies on dynamic PCDs to communicate the size of
system memory between the constructor of one of its library dependencies
and the core module. This is unnecessary, and forces us to incorporate
the PCD PEIM as well, for no good reason. So instead, let's use a HOB.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
To substantially reduce the amount of processing that takes place with
the MMU and caches off, implement a version of ArmPlatformLib specific
for QEMU/mach-virt in AArch64 mode that carries a statically allocated
and populated ID map that covers the NOR flash and device region, and
128 MiB of DRAM at the base of memory (0x4000_0000).
Note that 128 MiB has always been the minimum amount of DRAM we support
for this configuration, and the existing code already ASSERT()s in DEBUG
mode when booting with less.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Memory layout in CLoud Hypervisor for arm is changed and is different
with Qemu, thus we should build its own PeiMemInfoLib.
The main change in the memory layout is that normal ram may not contiguous
under 4G. The top 64M under 4G is reserved for 32bit device.
What this patch does:
1. get all of the memory node from DT;
2. Init page table for each memory node;
3. Add all of the memory nodes to Hob;
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
In an effort to clean the documentation of the above
package, remove duplicated words.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.muajwar@arm.com>
Alex reports that the cache invalidation performed by
ArmVirtMemoryInitPeiLib takes a non-negligible amount of time at boot.
This cache invalidation used to be necessary to avoid inconsistencies
between the CPU's cached and uncached views of the permanent PEI memory
region, given that the PEI phase is where the MMU gets enabled.
The only allocations done from permanent PEI memory with the MMU off are
pages used for page tables, and since commit 748fea6279
("ArmPkg/ArmMmuLib AARCH64: invalidate page tables before populating
them"), each of those is invalidated in the caches explicitly, for
reasons described in the patch's commit log. All other allocations done
in PEI are either from temporary PEI memory, which includes the stack,
or from permanent PEI memory but after the MMU has been enabled.
This means that the cache invalidation in ArmVirtMemoryInitPeiLib is no
longer necessary, and can simply be dropped.
Reported-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ard Biesheuvel
Leif Lindholm
Oliver Smith-Denny
Rebecca Cran
Michael Kubacki
Chao Li
Laszlo Ersek
Gerd Hoffmann
Sami Mujawar
Jianyong Wu
Pierre Gondois