SVN r19611 (git commit 7cac240163), "MdeModulePkg/Ide: return correct
status when DRQ is not ready for ATAPI", changed the behavior of
AtaPacketReadWrite(), when DRQReady2() reported an error. The previous
logic had been to:
(a) terminate the transfer loop,
(b) check the status register with CheckStatusRegister(), and determine
AtaPacketReadWrite()'s return code directly from that.
Action (a) had been correct, but action (b) had masked genuine errors.
For example, when DRQReady2() reported EFI_TIMEOUT -- because the BSY bit
had not been cleared within the allotted time --, CheckStatusRegister()
would report EFI_SUCCESS, simply *because* BSY was still set, and the rest
of the status bits could not be evaluated.
SVN r19611 (git commit 7cac240163) intended to fix action (b) by directly
propagating the error code of DRQReady2() from AtaPacketReadWrite(),
eliminating the CheckStatusRegister() call. This was the right thing for
most of the errors reported by DRQReady2() -- timeout, command abort,
other device error --, but there was one exception: the "read" sub-case of
EFI_NOT_READY, which stands for "'read' complete, with less data available
than the requested amount".
Regarding the "write" sub-case of EFI_NOT_READY: the
AtaPacketCommandExecute() function programs the full transfer length into
the IDE device before it calls AtaPacketReadWrite(), and
AtaPacketReadWrite() only uses CylinderLsb and CylinderMsb for "chunking"
(as requested by the device). Therefore the device cannot justifiedly
clear DRQ earlier than seeing the entire data, when writing.
However, when reading from the device, a "short read" is a successful
operation. (The actual read length will be decoded by the higher level
protocols.) And "short reads" had been handled correctly by the logic
before git 7cac240163. Namely, when DRQReady2() returns EFI_NOT_READY, the
BSY bit is already clear, and we can call CheckStatusRegister() to
investigate all the other bits it cares about.
Therefore restore the logic from before git 7cac240163, but only for the
"read" sub-case of EFI_NOT_READY.
This problem was encountered with OVMF running on QEMU's i440fx IDE
emulation. Many thanks to John Snow for analyzing QEMU's behavior, and
pointing out that it adhered to the relevant specs.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: John Snow <jsnow@redhat.com>
Reference: https://github.com/tianocore/edk2/issues/43
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19685 6f19259b-4bc3-4df7-8a09-765794883524
The DRQReady() and DRQReady2() functions only differ in that they poll
different status registers for BSY, ERR, and DRQ: the former looks at the
Status Register (clearing interrupt status), while the latter looks at the
Alternate Status Register (not clearing interrupt status).
They both correctly return a unique status code, EFI_NOT_READY, for the
BSY==0 && ERR==0 && DRQ==0
case; that is, when the device reports "command complete".
However, the functions' leading comments don't explain this case, so it's
easy to miss in callers. Update the comments.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: John Snow <jsnow@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19684 6f19259b-4bc3-4df7-8a09-765794883524
This driver links to PciHostBridgeLib provided by platform/silicon to
produce PciRootBridgeIo and PciHostBridgeResourceAllocation protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19658 6f19259b-4bc3-4df7-8a09-765794883524
As ScsiDisk and ScsiBus driver are used to manage SCSI or ATAPI devices,
the timeout value is updated to 30s to follow ATA/ATAPI spec in which
the device may take up to 30s to respond command.
The change is used to solve device compatibility issue found with a TEAC
DV-W28S-WZ3 slim DVD plus a SONY AccuCORE DVD-R media in which the DVD
spends 8s to response READ_CAPACITY cmd after resetting the host machine.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19612 6f19259b-4bc3-4df7-8a09-765794883524
When executing ATAPI cmd at IDE mode, EFI_SUCCESS may be returned wrongly
with old logic but in fact DRQ is not ready and the transaction doesn't
get executed correctly at this time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19611 6f19259b-4bc3-4df7-8a09-765794883524
This commit will raise the Tpl to TPL_NOTIFY when adding non-blocking SCSI
I/O requests to the asynchronous task list.
This commit will also raise the Tpl of asynchronous task polling timer to
TPL_NOTIFY.
These changes are made to match the behavior in ScsiDiskDxe driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19455 6f19259b-4bc3-4df7-8a09-765794883524
Raise the Tpl of async SCSI I/O callback function to TPL_NOTIFY to match
the behavior in ScsiDiskDxe driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19454 6f19259b-4bc3-4df7-8a09-765794883524
When reading data from non-blockingly from a CD-ROM logic partition, the
procedure can be shown by the following call stack:
(The write process is similar)
|-------------------|
| DiskIoDxe (logic) |<---Raise Tpl to TPL_CALLBACK
|-------------------|
|
| Sub-task 1 (UnderRun) succeeds
|
| |-----------------| |-----------------| |-----------------|
+--->| PartitionDxe |---->| DiskIoDxe (Phy) |---->| ScsiDiskDxe |
| |-----------------| |-----------------| |-----------------|
|
| Sub-task 2 (OverRun) fails
|
| |-----------------| |-----------------| |-----------------|
+--->| PartitionDxe |---->| DiskIoDxe (Phy) |---->| ScsiDiskDxe |
| |-----------------| |-----------------| |-----------------|
| ^
| |
More subtasks... Wait indefinitely
|
|<---Restore Tpl
|
Completes
In PartitionDxe, if the 'Lba' and 'BufferSize' parameters passed to
function PartitionReadBlocksEx() are invalid, the function will issue a
blocking ReadDisk call (in function ProbeMediaStatusEx()).
In DiskIoDxe, blocking I/O request will wait for all the non-blocking I/O
requests to complete first before sending down the blocking request.
If the Tpl of the async I/O callback in ScsiDiskDxe is TPL_CALLBACK and
Sub-task 1 (UnderRun) succeeds but Sub-task 2 (OverRun) fails with an
invalid parameter, DiskIoDxe will wait indefinitely for the event created
by ScsiDiskDxe of Sub-task 1 to signal.
Hence, this commit will raise the Tpl of async IO callback in ScsiDiskDxe
to TPL_NOTIFY so that the indefinite wait in DiskIoDxe can be avoided.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19452 6f19259b-4bc3-4df7-8a09-765794883524
Some SCSI devices will return EFI_DEVICE_ERROR or EFI_TIMEOUT when the
data length of a SCSI I/O command is too large.
This commit will repeatedly retry sending the SCSI command with a data
length half of its previous value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19451 6f19259b-4bc3-4df7-8a09-765794883524
The functions ScsiRead10CommandEx(), ScsiWrite10CommandEx(),
ScsiRead16CommandEx() and ScsiWrite16CommandEx() in UefiScsiLib will not
signal the event passed from ScsiDiskDxe when error occurs.
In this case, ScsiDiskDxe should close the event passing to these APIs in
UefiScsiLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19449 6f19259b-4bc3-4df7-8a09-765794883524
In ScsiExecuteSCSICommand(), when SCSI devices do not support non-blocking
I/O but an event is passed from caller (UefiScsiLib), the function will
execute the SCSI I/O command in a blocking manner and signal the caller
event when the command completes.
Originally, caller event from UefiScsiLib will be signaled if the SCSI
command fails. UefiScsiLib will continue to signal its caller (BlockIO2
request from ScsiDiskDxe driver), which is not aligned with the UEFI spec
that event will not be signaled when BlockIO2 request returns with error.
This commit will signal ScsiExecuteSCSICommand()'s caller event only when
the SCSI command succeeds.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19447 6f19259b-4bc3-4df7-8a09-765794883524
The functions ScsiDiskWriteBlocks(Ex) in ScsiDiskDxe/ScsiDisk.c do not
check whether the device is allow to be written originally.
This commit will add read-only check to follow the UEFI spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19445 6f19259b-4bc3-4df7-8a09-765794883524
The function ScsiDiskFlushBlocksEx() in ScsiDiskDxe/ScsiDisk.c originally
always returns EFI_SUCCESS, which is not aligned with the UEFI spec.
This commit adds addtional checks to see if the media in the device is
changed or removed. Check for whether the device can be written is also
added. Corresponding status will be returned according to the check
result.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19444 6f19259b-4bc3-4df7-8a09-765794883524
Operands in a bitwise operation have different size. Update code to fix it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19309 6f19259b-4bc3-4df7-8a09-765794883524
In function SignalCallerEvent(), 'Private' and 'TransReq' are dereferenced
before NULL checking.
Since the function assumes that both 'Private' and 'TransReq' passed in
are not NULL pointer, this commit will add an ASSERT to make sure the
above assumption is satisfied.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19266 6f19259b-4bc3-4df7-8a09-765794883524
Add missing braces in module global mControllerDevicePathTemplate.
Initialize ControllerNumber and ContainsControllerNode in
SerialControllerDriverStart() to address warning for potential use
before initialization warning.
Move initialization of local SerialIo earlier in
SerialControllerDriverStart() to address warning for potential use
before initialization warning.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19232 6f19259b-4bc3-4df7-8a09-765794883524
For function ScsiExecuteSCSICommand(), when the 'Event' parameter is not
NULL but the target SCSI device does not support non-blocking I/O, it will
execute a blocking I/O operation instead.
However, after the SCSI operation is done, the 'Event' is not signaled to
inform the caller.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19217 6f19259b-4bc3-4df7-8a09-765794883524
PciSioSerialDxe driver can manages UARTs on a SIO chip or a PCI/PCIE
card.
It manages the SIO instance whose last device path node is a ACPI
device path and the HID in the ACPI device path node equals to
EISA_PNP_ID (0x501).
It also manages the PCI IO instance whose class code is 7/0/2 (16550
UART). But when proper value is set to PcdPciSerialParameters, the
driver can also manage non-standard PCI serial cards by matching
the Vendor ID and Device ID specified in PcdPciSerialParameters.
The PCI BAR index, IO/MMIO offset, register stride, clock rate can
also be specified through the same PCD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19179 6f19259b-4bc3-4df7-8a09-765794883524
For a hot plug bridge with device attached, PciBusDxe driver reserves
the resources which equal to the total amount of padding resource
returned from HotPlug->GetResourcePadding() and the actual occupied
resource by the attached device. The behavior is incorrect.
Correct behavior is to reserve the bigger one between the padding
resource and the actual occupied resource.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18719 6f19259b-4bc3-4df7-8a09-765794883524
The resource dumping logic contains a bug which cannot dump the
resource for hot plug controller correctly. The patch fixes this
bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18718 6f19259b-4bc3-4df7-8a09-765794883524
Leif suggested to split the big patch to smaller ones.
This reverts commit 73b7f115c653c807b9d0be97bf516871d8aff7ba.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18717 6f19259b-4bc3-4df7-8a09-765794883524
Add a check for ResourcePaddingDescriptors being a valid pointer in
DumpPpbPaddingResource() to prevent looping on memory not owned by
PciBusDxe. The ResourcePaddingDescriptors is initialized to NULL
when the PCI_IO_DEVICE structure is allocated and remains NULL if
no PCI hot plug controllers are present. This issue is only
observed when DEBUG_CODE() macros are enabled and was introduced
by the following patch:
[edk2] [Patch] MdeModulePkg: Fix a PciBusDxe hot plug bug
SVN revsion 18658
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Kinney Michael <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18696 6f19259b-4bc3-4df7-8a09-765794883524
For a hot plug bridge with device attached, PciBusDxe driver reserves
the resources which equal to the total amount of padding resource
returned from HotPlug->GetResourcePadding() and the actual occupied
resource by the attached device. The behavior is incorrect.
Correct behavior is to reserve the bigger one between the padding
resource and the actual occupied resource.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18658 6f19259b-4bc3-4df7-8a09-765794883524
When looping through all PCI functions, code should not look for functions
1-7 if function 0 is not present or if function 0 indicates the device is
not multifunction. Prior to this fix the code would use stale data in a
buffer to determine if a device is multifunction even if function 0 is not
present. This fixes a code bug and provides very small performance
improvements.
PCI 2.3 Specification states: They [multifunction devices] are also
required to always implement function 0 in the device. Implementing other
functions is optional and may be assigned in any order.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Joseph Shifflett <joseph.shifflett@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18574 6f19259b-4bc3-4df7-8a09-765794883524
Some IDE controllers only update ID fields such as sector information on
specific commands such as the DIAG command.
The master/slave device is therefore selected both before and after
sending the DIAG command; otherwise reading the IDE registers yields the
master's ID fields.
(Reza's patch originally *moved* the master/slave selection from after the
DIAG command before it, however Feng asked for the original master/slave
select to be preserved; effectively making the master/slave select
*bracket* the DIAG command. See this subthread:
<http://thread.gmane.org/gmane.comp.bios.tianocore.devel/10545/focus=10550>.)
Cc: Alexander Graf <agraf@suse.de>
Cc: Reza Jelveh <reza.jelveh@tuhh.de>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Reza Jelveh <reza.jelveh@tuhh.de>
[feng.tian@intel.com: see above]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
[lersek@redhat.com: updated commit message]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18529 6f19259b-4bc3-4df7-8a09-765794883524
Certain PCI device may have capability pointing to itself.
Update LocateCapabilityRegBlock() to break when detecting such loop.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18473 6f19259b-4bc3-4df7-8a09-765794883524
The specification of the EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru()
function documents the EFI_BAD_BUFFER_SIZE return status, and the
EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN host adapter
status.
These allow an EFI_EXT_SCSI_PASS_THRU_PROTOCOL implementation to request
higher layers in the stack (in this instance, UefiScsiLib and ScsiDiskDxe)
to break up the transfer into smaller pieces.
These conditions percolate up the stack correctly: the retry loops in
ScsiDiskDxe's ScsiDiskReadSectors() and ScsiDiskWriteSectors() functions
correctly and transparently update the transfer size (ByteCount),
accommodating any shortening requested by lower levels of the stack. After
the loop -- if the request ultimately succeeds -- SectorCount is even
recalculated from the final ByteCount, to see how many sectors the outer
loop should advance.
However, the inner (ie. retry) loops both have the same error: when the
underlying protocols request the transfer to be shortened, the decrease in
transfer size (ie. ByteCount) should immediately be reflected in
SectorCount. Otherwise the sector count encoded in the CDB will exceed the
transfer size, which is a permanent error.
This issue has been witnessed while booting
en_windows_8.1_pro_n_vl_with_update_x86_dvd_6051127.iso
on the 32-bit build of OVMF, from a virtio-scsi CD-ROM:
(1) "cdboot.efi" correctly requested (from far atop) a long read:
Timeout=940000000
CdbLength=10
DataDir=Read
InTransferLength=134215680
OutTransferLength=0
SenseDataLength=108
Cdb: 28 00 00 00 25 DD 00 FF FF 00
^ ^^^^^^^^^^^ ^^^^^
| | |
| | number of 2KB sectors to read,
| | corresponding to 2048 * 65535 = 134215680 bytes
| | (see InTransferLength above)
| |
| LBA to read from
|
READ (10)
(2) In turn, the EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru() function
provided by "OvmfPkg/VirtioScsiDxe/VirtioScsi.c" asked for the request
to be shortened:
InTransferLength=16776704
OutTransferLength=16776704
SenseDataLength=0
HostAdapterStatus=EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN
TargetStatus=0
Status=EFI_BAD_BUFFER_SIZE
(3) Then ScsiDiskReadSectors() in
"MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c" retried the request
with correctly shortened transfer length, but incorrectly unchanged
sector count:
Timeout=940000000
CdbLength=10
DataDir=Read
InTransferLength=16776704 <--- updated as requested
OutTransferLength=0
SenseDataLength=108
Cdb: 28 00 00 00 25 DD 00 FF FF 00
^ ^^^^^^^^^^^ ^^^^^
| | |
| | not changed!
| |
| LBA to read from
|
READ (10)
(4) Since 65535 sectors of 2KB each wouldn't fit in a buffer of approx.
16MB, QEMU's virtio-scsi controller unconditionally rejected this
request with VIRTIO_SCSI_S_OVERRUN, which VirtioScsiDxe then mapped
to:
InTransferLength=16776704
OutTransferLength=0
SenseDataLength=0
HostAdapterStatus=EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN
TargetStatus=0
Status=EFI_DEVICE_ERROR
(5) After two more tries of the same, ScsiDiskDxe passed up the error,
which ultimately caused "cdboot.efi" to BSOD.
Many thanks to Larry Cleeton from Microsoft for helping debug
"cdboot.efi".
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18438 6f19259b-4bc3-4df7-8a09-765794883524
Acting specifically upon this error condition from UefiScsiLib (and
ultimately from EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru()) in the
- ScsiDiskRead10(),
- ScsiDiskWrite10(),
- ScsiDiskRead16(),
- ScsiDiskWrite16()
functions allows us to retry these operations from ScsiDiskReadSectors()
and ScsiDiskWriteSectors(), with adjusted transfer sizes, without
investigating further error details like Host Adapter Status, Target
Status, and Sense Data.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18437 6f19259b-4bc3-4df7-8a09-765794883524
The error handling for timeout case is enhanced to remove TDs from
transfer ring. The original code only removed s/w URB, but the h/w
transfer descriptor TDs didn't get removed. It would cause data lost
for data stream peripheral, such as usb-to-serial device, from the
s/w perspective.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18313 6f19259b-4bc3-4df7-8a09-765794883524
In the original code, there exists some mismatches between the real
waiting time and the corresponding timeout comments. For example, the
XHC_GENERIC_TIMEOUT comment says it's 10ms timeout value, but the real
code in fact waits 10s.
So the code is refined to be consistent in code logic and comments.
Note XHC_POLL_DELAY macro also be removed and the polling interval in
XhcWaitOpRegBit() is changed from 1ms to 1us to keep same code style
with other code. It has no real functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18235 6f19259b-4bc3-4df7-8a09-765794883524
EDKII usb stack is using a TPL_CALLBACK timer to monitor async transfer
request and signal event if it's done. As usb enumeration and usb mass
storage block i/o read/write runs on TPL_CALLBACK and TPL_NOTIFY level
respectively, It blocks usb async transfer requests, usually usb mouse
/use kb, getting time to run.
Without this change, user couldn't get usb mouse/kb state in time (will
show a little lag from UI view) when there is other usb transactions, such
as a new usb device inserted.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18169 6f19259b-4bc3-4df7-8a09-765794883524
According to the PCI spec, when software writes all-one to BAR for size probing,
the value read back should be 0b1...10...0 after masking the BAR type bits.
But in real world, it's possible that certain device returns 0b0...01...10...0
for MEM64 BAR size probing: some bits in the high 32bit may be 0.
PciBus driver has the code to handle such case. However, it doesn't handle the
case that the high 32bit is totally 0. The patch is to handle the special case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18114 6f19259b-4bc3-4df7-8a09-765794883524
The logic in an if statement in PciIo is too complex and hard to understand
and make VS2015 build failure. The fix simplifies the logic.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18109 6f19259b-4bc3-4df7-8a09-765794883524
GLOBAL_REMOVE_IF_UNREFERENCED means __declspec(selectany) for MS tool
chain IA32/X64 build.
According to MSDN, "selectany" would tell the compiler that the declared
global data item (variable or object) is a pick-any COMDAT (a packaged
function). At link time, if multiple definitions of a COMDAT are seen,
the linker picks one and discards the rest.
So we have to remove GLOBAL_REMOVE_IF_UNREFERENCED key word from two global
variable's extern definitions of .h file as we have used this keyword in
.c file, otherwise the MS tool chain would pick the definitions in .h file
and treat it as uninitialized data to generate full-0 content for these two
global variables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18088 6f19259b-4bc3-4df7-8a09-765794883524
The TPer Reset operation would be moved into SecurityPkg/Tcg/
MemoryOverwriteControl/TcgMor.inf module and be triggered at EndOfDxe.
By this way, all encrypted drives which produce EFI_STORAGE_SECURITY_
RPOTOCOL interface would be force reset when MOR is set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tian Feng <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17717 6f19259b-4bc3-4df7-8a09-765794883524
Produce this protocol for each namespace at NVMe controller.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tian Feng <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17638 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek
Ruiyu Ni
Feng Tian
Samer El-Haj-Mahmoud
Hao Wu
Jordan Justen
Michael Kinney
Anbazhagan, Baraneedharan
Joseph Shifflett
Reza Jelveh
Liming Gao