Promote Sean Rhodes as UefiPayloadPkg maintainer.
Remove Maurice and Benjamin since their role was changed.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
SSDT tables describing an SBSA compatible serial port receive an '_HID'
value of 'ARMH0011'. This value represents a PL011 serial port.
This patch:
- Generates an 'ARMHB000' instead
- References the 'ACPI for Arm Components 1.0 - 2020' document
specifying the '_HID' values to use.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Device Tree PCI interrupt flags use the convention described at
linux/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
The 3rd cell is the flags, encoded as follows:
bits[3:0] trigger type and level flags.
1 = low-to-high edge triggered
2 = high-to-low edge triggered (invalid for SPIs)
4 = active high level-sensitive
8 = active low level-sensitive (invalid for SPIs).
Fix the incorrect code.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3965
Currently DSC LibraryClass precedence rule is not align with DSC Spec.
The expectation rule should be:
[LibraryClasses.$(ARCH)] < [LibraryClasses.Common.$(MODULE_TYPE)]
The actual behavior is:
[LibraryClasses.$(ARCH)] > [LibraryClasses.Common.$(MODULE_TYPE)]
This patch fixes the issue.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Long1 Huang <long1.huang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently BaseTools use 'cp' command for PcdValueInit and GenMake
process, as the command can not keep the time info of the source
file, which will cause incremental build issue in Linux system,
thus the '-p' need be added to keep the source file's attributes
in copy process.
This patch fixes this issue.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Add 4 spaces before the boot prompt "F2 or Down..." so that the
spacing is equadistant from the top, which is spaced with a `\n`,
and the left.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Guo Dong <guo.dong@intel.com>
The CM_STD_OBJ_ACPI_TABLE_INFO.AcpiTableRevision can be used to specify
the major revision number of the ACPI table that the generator must use.
Although most ACPI tables only have a major revision number, the FADT
table additionally has a minor revision number.
The FADT generator currently defaults to setting the latest supported
ACPI revision for the FADT table i.e. ACPI 6.4. This means that the minor
revision for the FADT table is always set to 4 and there is no provision
for a user to specify the minor revision to be selected.
Therefore, update CM_STD_OBJ_ACPI_TABLE_INFO to introduce a new field
MinorRevision which can be used to specify the minor revision for an
ACPI table. Also update the FADT generator to validate the supported
FADT revisions ans use the specified minor revision for the FADT table
if supported. If an unsupported minor revision is specified the FADT
generator defaults to the latest supported minor revision.
Since the CM_STD_OBJ_ACPI_TABLE_INFO.MinorRevision field is added to
the end of the structure, it should not break existing platform code.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: <pierre.gondois@arm.com>
Tested-by: Jagadeesh Ujja <Jagadeesh.Ujja@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3957
The reserved IDT table size in SecCore is too small for X64. Changed the type
of IdtTable in SEC_IDT_TABLE from UINT64 to IA32_IDT_GATE_DESCRIPTOR to have
sufficient size reserved in IdtTable for X64.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ashraf Ali S <ashraf.ali.s@intel.com>
Signed-off-by: Ted Kuo <ted.kuo@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3957
The reserved IDT table size in SecCore is too small for X64. Changed the type
of IdtTable in SEC_IDT_TABLE from UINT64 to IA32_IDT_GATE_DESCRIPTOR to have
sufficient size reserved in IdtTable for X64. dff
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Ashraf Ali S <ashraf.ali.s@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Ted Kuo <ted.kuo@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Updated DMAR definitions accordingly to changes in Intel(R) Virtualization
Technology for Directed I/O (VT-D) Architecture Specification ver4.0.
Added new definition of remapping structure - SIDP. The SoC Integrated
Device Property (SIDP) reporting structure identifies devices that have
special properties and that may put restrictions on how system software
must configure remapping structures that govern such devices in a platform
where remapping hardware is enabled.
Updated DRHD definition - field 'reserved' is replaced with 'Size'.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3978
Signed-off-by: Robert Kowalewski <robert.kowalewski@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Jenny Huang <jenny.huang@intel.com>
Cc: Sheng Wei <w.sheng@intel.com>
Reviewed-by: Sheng Wei <w.sheng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3979
Add CryptoDxe into UPL.
Drviers can locate protocol instead of building openssl lib into drivers.
This can reduce the binary size that UPL required.
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: PaytonX Hsieh <paytonx.hsieh@intel.com>
The python BaseTools/Edk2ToolsBuild.py creates files in
BaseTools/BaseToolsBuild and should be ignored.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The new changes in SecureBootVariableLib brought in a new dependency
of PlatformPKProtectionLib.
This change added the new library instance from SecurityPkg to resolve
ArmVirtPkg builds.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Add debug messages to make it easier to verify PlatformSecLib
is passing the data properly.
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Isaac Oram <isaac.w.oram@intel.com>
There are two scene communicate with StandaloneMm(MM):
1 edk2 -> TF-A -> MM, communicate MM use non-secure buffer which
specify by EFI_SECURE_PARTITION_BOOT_INFO.SpNsCommBufBase;
2 RAS scene: fiq -> TF-A -> MM, use secure buffer which
specify by EFI_SECURE_PARTITION_BOOT_INFO.SpShareBufBase;
For now, the second scene will failed because check buffer address.
This patch add CheckBufferAddr() to support check address for secure
buffer.
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
TF-A: TrustedFirmware-A
SPM: Secure Partition Manager(MM)
In TF-A, the name of this field is sp_shared_buf_size. This field is
the size of range for transmit data from TF-A to standaloneMM when
SPM enable.
SpPcpuSharedBufSize is pass from TF-A while StandaloneMM initialize.
So, SpPcpuSharedBufSize should be rename to SpSharedBufSize and this field
should no multiply by PayloadBootInfo->NumCpus;
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The new changes in SecureBootVariableLib brought in a new dependency of
PlatformPKProtectionLib.
This change added the new library instance from SecurityPkg to resolve
pipeline builds.
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
The new changes in SecureBootVariableLib brought in a new dependency of
PlatformPKProtectionLib.
This change added the new library instance from SecurityPkg to resolve
pipeline builds.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3911
This change added unit test and enabled it from pipeline for the updated
SecureBootVariableLib.
The unit test covers all implemented interfaces and certain corner cases.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Kun Qin <kun.qin@microsoft.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3909
This change is in pair with the previous SecureBootVariableLib change,
which updated the interface of `CreateTimeBasedPayload`.
This change added a helper function to query the current time through
Real Time Clock protocol. This function is used when needing to format
an authenticated variable payload.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Kun Qin <kun.qin@microsoft.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3910
This change added common header files to consumer drivers to unblock
pipeline builds.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Kun Qin <kun.qin@microsoft.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3910
This change is in pair with the previous SecureBootVariableLib, which
removes the explicit invocation of `CreateTimeBasedPayload` and used new
interface `EnrollFromInput` instead.
The original `SecureBootFetchData` is also moved to this library and
incorporated with the newly defined `SecureBootCreateDataFromInput` to
keep the original code flow.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Kun Qin <kun.qin@microsoft.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3911
This change updated the interfaces provided by SecureBootVariableLib.
The new additions provided interfaces to enroll single authenticated
variable from input, a helper function to query secure boot status,
enroll all secure boot variables from UefiSecureBoot.h defined data
structures, a as well as a routine that deletes all secure boot related
variables.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Kun Qin <kun.qin@microsoft.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3910
This change removes the interface of SecureBootFetchData, and replaced
it with `SecureBootCreateDataFromInput`, which will require caller to
prepare available certificates in defined structures.
This improvement will eliminate the dependency of reading from FV,
extending the availability of this library instance.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Kun Qin <kun.qin@microsoft.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3909
This change updated the interface of 'CreateTimeBasedPayload' by
requiring the caller to provide a timestamp, instead of relying on time
protocol to be ready during runtime. It intends to extend the library
availability during boot environment.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Kun Qin <kun.qin@microsoft.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3911
This patch provides an abstracted interface for platform to implement PK
variable related protection interface, which is designed to be used when
PK variable is about to be changed by UEFI firmware.
This change also provided a variable policy based library implementation
to accomodate platforms that supports variable policy for variable
protections.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Kun Qin <kun.qin@microsoft.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3910
This change added certificate and payload structures that can be consumed
by SecureBootVariableLib and other Secure Boot related operations.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Kun Qin <kun.qin@microsoft.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
The issue appears to have been introduced by:
41fb5d46 : ArmPkg/ArmGic: Use the GIC Redistributor instead of GIC Distributor for GICv3
The changes to ArmGicIsInterruptEnabled() introduced the error where the Boolean
result is assigned to Interrupts, but then the bit position check is performed
again (against the computed Boolean result instead of the interrupt mask) during
the return statement.
Fix removes erroneous test and relies on boolean test made at return.
Signed-off-by: Robbie King <robbiek@xsightlabs.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3915
This commit adds each capability bit definition
for NFIT Platform Capabilities Structure.
The type has been added since ACPI Specification Version 6.2A.
Signed-off-by: Miki Shindo <miki.shindo@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Upgrade the edk2-basetools version from 0.1.17 to 0.1.24
features and bug fixes:
1. Add FMMT Python Tool
2. Remove RVCT support
3. Fix dependency issue in PcdValueInit
4. Output the intermediate library instance when error occurs
5. Ecc: Fix grammar in Ecc error message
6. Fix the GenMake bug for .cpp source file
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3963
Based on UPL spec 2.12.2. Universal Payload Information Section,
it defines item "Attribute" on UPLD_INFO_HEADER for Debug build
should be "1", and Release build should be "0".
Currently, The value of item "Attribute" is always "0"
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: James Lu <james.lu@intel.com>
Signed-off-by: Gua Guo <gua.guo@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3915
This commit adds a definition type 7 Platform Capabilities Structure
and the struct definition for NFIT Table Structure Types.
The type has been added since ACPI Specification Version 6.2A.
Signed-off-by: Miki Shindo <miki.shindo@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Build-rules.txt lists .cc and .cpp as supported file extensions.
BaseTools commit 05217d210e introduce a regression issue that
ignore the .cc and .cpp file type.
This patch is to fix this bug.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
Add support process Port Speed field value of PORTSC according to
Supported Protocol Capability (define in xHCI spec 1.1)
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3914
The value of Port Speed field in PORTSC bit[10:13]
(xHCI spec 1.1 section 5.4.8) should be change to use this value to
query thru Protocol Speed ID (PSI) (xHCI spec 1.1 section 7.2.1)
in xHCI Supported Protocol Capability and return the value according
the Protocol Speed ID (PSIV) Dword.
With this mechanism may able to detect more kind of Protocol Speed
in USB3 and also compatiable with three kind of speed of USB2.
Cc: Jenny Huang <jenny.huang@intel.com>
Cc: More Shih <more.shih@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Ian Chiu <Ian.chiu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Include HardwareInfoLib classes in the IntelTdxX64.dsc for this
platform to use it during build given that PciHostBridgeUtilityLib
depends on it.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
Include DxeHardwareInfoLib class in the common ArmVirt.dsc.inc so that
ArmVirt* platforms use it during build given that PciHostBridgeUtilityLib
depends on it.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3960
Currently, UniversalPayloadBuild.py don't have support
python3.6, we use python3.6 will encounter f"" failure
use the change to fix it to support python3.6/3.7/3.8.
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: KasimX Liu <kasimx.liu@intel.com>
A memory range can be submitted for attribute changes which is large
enough to not require a page split during the attribute update. Consider
the following scenario:
1. An attribute update removed the RW attribute on a range large enough
to not require a page split.
2. Later, an attributes update is called to re-add the RW attribute for
a subsection of that larger page which requires a split
3. The attribute update logic performs a page split, so now the parent
and child pages have matching attributes
4. Then, the attribute update logic changes the child page to have the
RW attribute.
5. The child page would then correctly have the RW attribute added but
the parent page would still have the RW attribute removed which will
cause an improper access violation.
The page being split should have loose attributes to accommodate the
above case. The split page should always have the attributes set so
the lowest level page frame determines the access rights as detailed
in 4.10.2.2 of the Intel 64 and IA-32 Architectures Software
Developer Manual. Setting the User/Supervisor attribute shouldn't
be necessary.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Taylor Beebe <t@taylorbeebe.com>
For Arm platforms that support more that one serial port, one of the
serial port can be used for connecting debuggers such as WinDbg. There
are PCDs that allow the base address and clock rate to be specified for
this debug serial port but not its interrupt number. So add a PCD to
specify the interrupt number assigned to the serial debug port
controller.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Consume the host-provided specification of PCI host bridges if
available. Using the DxeHardwareInfoLib, populate a list of
hardware descriptors based on the content of the "hardware-info"
fw-cfg file, if provided. In the affirmative case, use the
resources and attributes specified by the hypervisor for each
Host Bridge to create the RootBridge elements.
In Ovmf platforms, the host can provide the specification of
non-discoverable hardware resources like PCI host bridges. If the
proper fw-cfg file is found, parse the contents provided by the
host into a linked list by using the Hardware Info library. Then,
using the list of PCI host bridges' descriptions, populate the
PCI_ROOT_BRIDGES array with the resources and attributes specified
by the host. If the file is not provided or no Host Bridge is found
in it, fold back to the legacy method based on pre-defined
apertures and rules.
In some use cases, the host requires additional control over the
hardware resources' configurations in the guest for performance and
discoverability reasons. For instance, to disclose information about
the PCI hierarchy to the guest so that this can profit from
optimized accesses. In this case, the host can decide to describe
multiple PCI Host Bridges and provide a specific set of resources
(e.g. MMIO apertures) so that the guest uses the values provided.
Using the provided values may entitle the guest to added performance,
for example by using specific MMIO mappings that can enable peer-to-peer
communication across the PCI hierarchy or by allocating memory closer
to a device for faster DMA transactions.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
Read the "hardware-info" item from fw-cfg to extract specifications
of PCI host bridges and analyze the 64-bit apertures of them to
find out the highest 64-bit MMIO address required which determines
the address space required by the guest, and, consequently, the
FirstNonAddress used to calculate size of physical addresses.
Using the static PeiHardwareInfoLib, read the fw-cfg file of
hardware information to extract, one by one, all the host
bridges. Find the last 64-bit MMIO address of each host bridge,
using the HardwareInfoPciHostBridgeLib API, and compare it to an
accumulate value to discover the highest address used, which
corresponds to the highest value that must be included in the
guest's physical address space.
Given that platforms with multiple host bridges may provide the PCI
apertures' addresses, the memory detection logic must take into
account that, if the host provided the MMIO windows that can and must
be used, the guest needs to take those values. Therefore, if the
MMIO windows are found in the host-provided fw-cfg file, skip all the
logic calculating the physical address size and just use the value
provided. Since each PCI host bridge corresponds to an element in
the information provided by the host, each of these must be analyzed
looking for the highest address used.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
Following the Hardware Info library, create the DxeHardwareInfoLib
which implements the whole API capable of parsing heterogeneous hardware
information. The list-like API grants callers a flexible and common
pattern to retrieve the data. Moreover, the initial source is a BLOB
which generalizes the host-to-guest transmission mechanism.
The Hardware Info library main objective is to provide a way to
describe non-discoverable hardware so that the host can share the
available resources with the guest in Ovmf platforms. This change
features and embraces the main idea behind the library by providing
an API that parses a BLOB into a linked list to retrieve hardware
data from any source. Additionally, list-like APIs are provided so
that the hardware info list can be traversed conveniently.
Similarly, the capability is provided to filter results by specific
hardware types. However, heterogeneous elements can be added to the
list, increasing the flexibility. This way, a single source, for
example a fw-cfg file, can be used to describe several instances of
multiple types of hardware.
This part of the Hardware Info library makes use of dynamic memory
and is intended for stages in which memory services are available.
A motivation example is the PciHostBridgeLib. This library, part
of the PCI driver populates the list of PCI root bridges during DXE
stage for future steps to discover the resources under them. The
hardware info library can be used to obtain the detailed description
of available host bridges, for instance in the form of a fw-cfg file,
and parse that information into a dynmaic list that allows, first to
verify consistency of the data, and second discover the resources
availabe for each root bridge.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
Define the HardwareInfoLib API and create the PeiHardwareInfoLib
which implements it, specifically for Pei usage, supporting
only static accesses to parse data directly from a fw-cfg file.
All list-like APIs are implemented as unsupported and only a
fw-cfg wrapper to read hardware info elements is provided.
The Hardware Info library is intended to describe non-discoverable
hardware information and share that from the host to the guest in Ovmf
platforms. The QEMU fw-cfg extension for this library provides a first
variation to parse hardware info by reading it directly from a fw-cfg
file. This library offers a wrapper function to the plain
QmeuFwCfgReadBytes which, specifically, parses header-data pairs out
of the binary values in the file. For this purpose, the approach is
incremental, reading the file block by block and outputting the values
only for a specific known hardware type (e.g. PCI host bridges). One
element is returned in each call until the end of the file is reached.
Considering fw-cfg as the first means to transport hardware info from
the host to the guest, this wrapping library offers the possibility
to statically, and in steps, read a specific type of hardware info
elements out of the file. This method reads one hardware element of a
specific type at a time, without the need to pre-allocate memory and
read the whole file or dynamically allocate memory for each new
element found.
As a usage example, the static approach followed by this library
enables early UEFI stages to use and read hardware information
supplied by the host. For instance, in early times of the PEI stage,
hardware information can be parsed out from a fw-cfg file prescinding
from memory services, that may not yet be available, and avoiding
dynamic memory allocations.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
James Lu
Guo Dong
Nate DeSimone
Pierre Gondois
Chen, Christine
Sean Rhodes
Sami Mujawar
Kuo, Ted
Robert Kowalewski
PaytonX Hsieh
Jeff Brasen
Kun Qin
Oram, Isaac W
Ming Huang
kuqin
Heng Luo
Robbie King
Miki Shindo
Min Xu
Bob Feng
Gua Guo
Ian Chiu
Rebecca Cran
Nicolas Ojeda Leon
KasimX Liu
Ray Ni
Thomas Abraham