Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14117 6f19259b-4bc3-4df7-8a09-765794883524
We cannot specify a pin-GSI connection for the SCI directly in the _PRT
because that implies ActiveLow polarity, clashing with both qemu and the
MADT we prepare.
With this patch the RHEL-6 guest logs the following:
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *10 11)
The patch amends svn rev 13625. Testing it in a RHEL-6 guest, the problems
described in
<http://sourceforge.net/mailarchive/message.php?msg_id=29660862> do not
reappear.
The code is derived from Paolo Bonzini's patch (originally appearing as
SeaBIOS commit f64a472a, "acpi: reintroduce LNKS"). Said original patch is
copyrighted by Red Hat (our common employer), and it has been relicensed
<http://sourceforge.net/mailarchive/message.php?msg_id=30393854> to form
the basis of this derived patch for edk2. The latter is therefore
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14111 6f19259b-4bc3-4df7-8a09-765794883524
PL031_TimeZone and PL031_Daylight are not global variables as defined by UEFI specification
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14107 6f19259b-4bc3-4df7-8a09-765794883524
Previously for IA32, we would only try to run qemu. Newer releases
of QEMU now have renamed the x86 qemu to qemu-system-i386.
Now, we search for:
1. qemu-system-i386
2. qemu-system-x86_64
3. qemu
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14101 6f19259b-4bc3-4df7-8a09-765794883524
This constant allows to reduce architecture difference in the position
of the IRQ in the exception table.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14099 6f19259b-4bc3-4df7-8a09-765794883524
When deleting a boot entry from the boot menu all next entries must
be copied one entry up to rearrange the BootOrder list.
This patch fixes the copy: each boot entry is 16 bits, not 8 bits.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14090 6f19259b-4bc3-4df7-8a09-765794883524
Add '.' to the list of directories recognised as the root directory
of semi-hosting.
This is important for EdkShell because listing files in the root directory
of semi-hosting (e.g. ls fsnt0:) is tranformed in a way that uses '.'
Without this patch this results in EdkShell hanging and returning
an "Out of resources" error in the end. With this patch the command
is immediately recognised as unsupported.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14089 6f19259b-4bc3-4df7-8a09-765794883524
1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase.
Add DebugAgentDxe driver to initialize Debug Agent in DXE phase.
DebugAgentDxe driver could be loaded and unloaded in shell.
2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE.
3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel.
4. Clear DR7 register in exception handler.
5. Set the default serial port parameter to 0 instead of PCDs.
6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function.
7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c.
8. Add one spin lock for accessing Mailbox when MP debugging supported.
9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell.
10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory.
11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase.
12.Add supporting on mode switch code debugging.
13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack.
14.Fix debug timer interrupt missing issue after back from legacy code.
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
Add required flags to [BuildOptions] in PythonCore.inf.
Add initialization routine to Efi/config.c.
Alter #include targets if building for UEFI in expat_external.h and xmlparse.c.
Add expat modifications to PyMod-2.7.2/Modules/expat.
Contributed-under: TianoCore Contribution Agreement 1.0
Submitted-by: Duane Voth <duanev@gmail.com>
Signed-off-by: daryl.mcdaniel@intel.com
Reviewed-by: duanev@gmail.com
Reviewed-by: daryl.mcdaniel@intel.com
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14071 6f19259b-4bc3-4df7-8a09-765794883524
set old variable to IN_DELETED_TRANSITION -> check if reclaim is needed(If yes, do reclaim) -> add new variable -> set old variable to DELETED if no reclaim happened.
to:
set old variable to IN_DELETED_TRANSITION -> check if reclaim is needed(If yes, do reclaim) -> add new variable -> set old variable to DELETED.
2. Update UpdateVariable() to correctly handle the case "both ADDED and IN_DELETED_TRANSITION variable are present", and delete both old ADDED and IN_DELETED_TRANSITION variable when deleting or updating variable.
3. Update VariableServiceGetNextVariableName() to return the valid IN_DELETED_TRANSITION variable if only IN_DELETED_TRANSITION variable is present.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14065 6f19259b-4bc3-4df7-8a09-765794883524
vanjeff
lgao4
sfu5
ydong10
lzeng14
jljusten
oliviermartin
gdong1
andrewfish
li-elvin
darylm503