When building AARCH64 platforms that include a Shell binary built from
source, we run into trouble when using the tiny code model for DEBUG
builds. The reason is that the Shell binary built in DEBUG mode exceeds
the 1 MB range of the ADR instruction, so anything that gets pulled into
the final link of the Shell binary either needs to be built with the small
or large model, or needs to be sorted in some way to put the ADR references
close to their targets.
Since code size is not a big concern for DEBUG builds anyway, let's move
to the small code model for all modules when using DEBUG GCC49. This way,
there is no need for workarounds that are specific to UEFI_APPLICATION
modules in general, or the Shell application in particular.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This aligns the GCC definitions for 4.6 and up to align with the ARM and
AARCH64 definitions, which is to ignore unused but set variables only on
RELEASE builds. This allows us to find instances of unused variables that
are left behind after refactoring. It also allows us to find bad new code,
which, due to the EDK2 coding style which disallows initialized automatic
variables, may contain such variables without having been noticed by other
toolchains.
(Slightly edited) observation from Jordan Justen
<jordan.l.justen@intel.com>: RELEASE builds must keep the flag because
debug code (such as assertions) may collapse to nothing -- e.g. if a
platform defines MDEPKG_NDEBUG for RELEASE -- and therefore trigger the
warning.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
[lersek@redhat.com: incorporate commit message update from Jordan]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
In last Nmake patch, when we generate the response file, we would replace
all the Macros in the make file. Once there have undefined macro used,
the tool direct report error. In this patch, we use following solution to
resolve the failure.
1. Add all the defined macros into AutoGenObject macro dict
2. For the undefined macros which used in the Make file, when we generate
the response file, we not include this macro, let make phase to handle.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
NMAKE is limited to command-line length of 4096 characters. Due to the
large number of /I directives specified on command line (one per include
directory), the path length of WORKSPACE is multiplied by the number of
/I directives and can exceed the limit.
This patch:
1. Add new build option -l, --cmd-len to set the maximum command line
length, default value is 4096.
2. Generate the response file only if the command line length exceed its
maximum characters (default is 4096) when build the module. Cover
PP_FLAGS, CC_FLAGS, VFRPP_FLAGS, APP_FLAGS, ASLPP_FLAGS, ASLCC_FLAGS and
ASM_FLAGS.
3. The content of the response file is combine from the FLAGS option and
INC option.
4. When build failure, it would print out the response file's file
location and its content.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
this patch add new feature to support override PCD value on the command
line. The value from the command line is the highest priority.
1.Add option(--pcd) to support both PcdName and TokenSpaceGuild.PcdName
2.For void* type PCD, use following format:
cstring PCD: --pcd PcdName="string"
unicodestring PCD: --pcd PcdName=L"string"
CArray PCD: --pcd PcdName=B"{0x1, 0x2}"
3.Build Report, use *B to show the PCD value was overridden in the
command line.
4.Error Condition:
Report error if the PCD is not found
Report error if the PcdName is found under multiple different TokenSpaceGuid
Report error if PCD value syntax is incorrect
Report error if void* type PCD value exceed its max size
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch fixes the assumed invalid command to start recent versions
of cx_freeze on Windows, which are python and not Windows
executables. To launch them correctly, the '$(PYTHON_HOME)\python'
prefix has been added, so that Python can interpret the tool.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Add DEST_DIR_OUTPUT and DEST_DIR_DEBUG into AutoGenObject macro dict.
Because some module (eg: BaseUefiCpuLib) may use this macro in the make
file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When someone doesn't know where to find or what to do with
vsvars32.bat, get_vsvars.bat can be used.
CC: Yonghong Zhu <yonghong.zhu@intel.com>
CC: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Peter Kirmeier <topeterk@freenet.de>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The original bug is only consider int format of PcdSize, but forgot the
Hex format. The fix is use the already exist variable PCD.PcdBinSize
which done to translate PCD size cover both format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update the mail address from edk2-devel@lists.sourceforge.net to
edk2-devel@lists.01.org.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
The script is updated to support both python 2.7 and python 3.
v2:
* Use io.open() rather than open() (Jaben)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Erik Bjorge <erik.c.bjorge@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Convert to use the argparse library rather than optparse.
As part of the conversion, the script will now give an error message
if no arguments are given. Previously the script would give an
exception when no arguments were given.
Fixes: https://github.com/tianocore/edk2/issues/65
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The script previously would hit an exception if it was run outside of
a git tree.
The exception looked like:
edk2/BaseTools/Scripts/ConvertMasmToNasm.py Version 0.01
Traceback (most recent call last):
File "edk2/BaseTools/Scripts/ConvertMasmToNasm.py", line 986, in <module>
ConvertAsmApp()
File "edk2/BaseTools/Scripts/ConvertMasmToNasm.py", line 984, in __init__
ConvertAsmFile(src, dst, self)
File "edk2/BaseTools/Scripts/ConvertMasmToNasm.py", line 209, in __init__
CommonUtils.__init__(self, clone)
File "edk2/BaseTools/Scripts/ConvertMasmToNasm.py", line 69, in __init__
self.gitemail = clone.gitemail
AttributeError: ConvertAsmApp instance has no attribute 'gitemail'
Fixes: https://github.com/tianocore/edk2/issues/63
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Instead of only handling SEC Core or PEI Core instances in the outer FV,
the GenFv tool will now recurse into FV image FFS files to look for instances
in encapsulated FVs so the vector area can be updated appropriately.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For VOID* Pcd with {} value, If platform developer wants to put in a
specific hex offset value that is not 8-byte aligned for VOID * then we
allow it with a warning message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch makes sure the MODULE_DIR variable points to the correct
location when multiple workspaces are used. Currently, it is
always prefixed with $(WORKSPACE), which only works as long as the
package is in the Workspace.
Code modules were not effected because the required paths were valid,
but for custom Makefiles, the MODULE_DIR variable is used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
There are no functional changes in this patch. fixing the format base on
last commit.
The only change is 1) add back the blank line, which can help we better
compare with the original LZMA source code. 2) remove the indent of
#ifndef and #endif.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when make BaseTools by VS2013, LzmaEnc.c report warning C4127:
conditional expression is constant, so this patch fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Newer GCC compilers use a default of march higher than i586
for -m32 (IA32 configuration) and this is causing generation of
instructions that are not compatible with all IA32 targets.
Specically Galileo platform support in the QuarkPlatformPkg does
not boot if GCC48 or higher is used.
This is similar to the following checkin that was done to address
this same issue for VS2012 and higher tool chains:
SHA-1: 71028ba2c4
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Leroy Leahy <leroy.p.leahy@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when no line directive in file, the tool still need to strip the typedef
statement (eg: typedef struct, typedef union ..).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
There are no functional changes in this patch.
The only change is to the XML format, updated using Visual Studio
Edit->Advanced->Format Document.
Different XML Schema editors use different formats for indentation and
line breaks. Visual Studio 2013 uses a two space indentation for content.
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Larry Hauch <larry.hauch@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
The way the first use of the "_maxMode" variable is commented out (i.e.,
together with the enclosing "if" statement) in GetOptimum() triggers the
"misleading-indentation" warning that is new in gcc-6.0, for the block of
code that originally depended on the "if" statement. Gcc believes
(mistakenly) that the programmer believes (mistakenly) that the block
depends on (repIndex == 0) higher up.
Restore the if statement, with a controlling expression that comprises the
constant 1 and "_maxMode" commented out.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reported-by: Cole Robinson <crobinso@redhat.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Build-tested-by: Cole Robinson <crobinso@redhat.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1307439
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The Help information provided by VolInfo does not follow the EDK II Tools
Design doc, so this patch update the help text and add the generic
options: -d, -v, -q, -s.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when build.py was failing to build packages but was not providing any
error message except for “Failed to start command.” this patch provide
the error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
current GCC build report error: 'for' loop initial declarations are only
allowed in C99 or C11 mode, the patch fix this failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch revises multiple diagnostic messages to use correct
datatypes. It also checks that a symbol name that is about to be used
in a diagnostic message is terminated by a null character within the
contents of the string table section so that the print routine does
not read past the end of the string table section contents when
reading the symbol name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch expands the error message that is output when GenFw
encounters a bad symbol definition or an unsupported symbol type. It
displays the symbol name, the symbol address, and a message that
describes both possibilities (bad symbol definition or unsupported
symbol type). It also provides two examples of unsupported symbol
types.
Furthermore, this patch revises the conditional for detecting bad
symbol definitions to eliminate a redundant test (a Sym->st_shndx
value of SHN_ABS should certainly be greater than mEhdr->e_shnum) and
to change another test from 'Sym->st_shndx > mEhdr->e_shnum' to
'Sym->st_shndx >= mEhdr->e_shnum' for consistency with the test in
GetShdrByIndex.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch revises GetPhdrByIndex and GetShdrByIndex to cause GenFw to
exit with an error message when a section header lookup fails. The
current behavior of those functions in such circumstances is to return
NULL, which can cause GenFw to subsequently fault when it attempts to
dereference the null pointer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Standardize the --version and --help text command-line options
Updated tools to correctly display the Build number when using command-line
option --version and exit successfully after termination.
Ecc was also updated to print informational messages after the options are
parsed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Larry Hauch <larry.hauch@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
This adds support to the ELF to PE/COFF conversion performed by GenFw for
the AArch64 ELF relocation types R_AARCH64_PREL64, R_AARCH64_PREL32 and
R_AARCH64_PREL16. Since we already require the ELF and PE/COFF section
layouts to be identical in order to support other relative relocation
types, this is simply a matter of whitelisting these new relocation types
in the same way.
While we're at it, clean up the code a bit, and add a comment explaining
why these relocations are ignored in WriteRelocations64 ().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If a -D flag is passed into build that selects different lines in
[PcdsDynamicExVpd], then build does not see any changes to the timestamp
of the DSC file and the VPD tool is not used to regenerate the VPD
region based in the statements that are active. so we changed the detect
condition and use SaveFileOnChange function to generate VPD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19767 6f19259b-4bc3-4df7-8a09-765794883524
VOID* Patchable PCD in Library has the different declaration from the
one in Driver, this issue that will cause GCC LTO build failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19766 6f19259b-4bc3-4df7-8a09-765794883524
The VpdOffset value in the DSC both support integer and Hex value, so we
fix the bug to support both format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19765 6f19259b-4bc3-4df7-8a09-765794883524
Check if the Fdf.CurrentFdName is not None and in Fdf.Profile.FdDict
before using it which fix a crash issue when no FD section in FDF file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19747 6f19259b-4bc3-4df7-8a09-765794883524
Check if the FV name is in the FV dictionary before using it which fixes
a crash during build report generation when FVs are specified by path in
the FDF.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19705 6f19259b-4bc3-4df7-8a09-765794883524
- Remove test usage declared obsolescent by POSIX
- Pass argv array through as literal rather than forming into a string, then
string-splitting and glob-expanding same.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Charles Duffy <chaduffy@cisco.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19697 6f19259b-4bc3-4df7-8a09-765794883524
- Avoid obsolescent forms of test builtin (`-a` and `-o`; see APPLICATION USAGE
section of http://pubs.opengroup.org/onlinepubs/9699919799/utilities/test.html).
- Quote all expansions to prevent string-splitting and globbing.
- Avoid unspecified "exit -1" (only single-byte integers are valid); instead,
use identical exit status to shell command-not-found.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Charles Duffy <chaduffy@cisco.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19695 6f19259b-4bc3-4df7-8a09-765794883524
- Use `python2` executable if it exists, to avoid breakage on systems (such as
Arch Linux) where `python` is Python 3.
- Quote all references to `$0`, for safety when located in a directory
containing spaces in its name.
- Use the `exec` shell command to avoid leaving the shell wrapper in the
process table when invoking the actual build tool.
- Use `"$@"` rather than `$*` to pass arguments through directly rather than
concatenating to a string, and then string-splitting and glob-expanding its
contents.
- Use `$BASH_SOURCE` in preference to `$0` (which is only guaranteed to be
process name, *not* source path).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Charles Duffy <chaduffy@cisco.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19694 6f19259b-4bc3-4df7-8a09-765794883524
By the BUILDRULEORDER feature to process files listed in INF [Sources]
sections in priority order, if a filename is listed with multiple
extensions, the tools will use only the file that matches the first
extension in the space separated list.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19686 6f19259b-4bc3-4df7-8a09-765794883524
Base on build spec update, ASCII strings(“string”), will be byte aligned,
Unicode strings(L”string”) will be two-byte aligned, Byte arrays,
{0x00, 0x01} will be 8-byte aligned.
This patch is going to update VPD Tool to allocate VOID* PCDs to an offset
value that is aligned based in syntax of the PCD value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19651 6f19259b-4bc3-4df7-8a09-765794883524
Base on build spec update, ASCII strings(“string”), will be byte aligned,
Unicode strings(L”string”) will be two-byte aligned, Byte arrays,
{0x00, 0x01} will be 8-byte aligned.
This patch is going to halt with an error message if a VOID* PCD has an
offset value that is not aligned based on the syntax of the PCD value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19650 6f19259b-4bc3-4df7-8a09-765794883524
The Regular Expression parsing of lines in MAP files does not currently
support the use of '-' in the column for the filename the symbol is
sources from, it cause a build break from the GenPatchPcdTable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19649 6f19259b-4bc3-4df7-8a09-765794883524
GCC for AARCH64 recognizes byte swapping load and store sequences
and may replace them with wider loads or stores combined with rev
instructions. In some cases (i.e., with GCC version 5 and later)
this may result in unaligned accesses, which are not allowed before
we turn the MMU on.
So build any modules or static libraries that may execute with the MMU
off with -mstrict-align. Other modules don't need this switch, so we
can remove it from the CLANG35/AARCH64 common CC flags.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19638 6f19259b-4bc3-4df7-8a09-765794883524
This introduces a special .c to .obj build rule for GCC/AARCH64 that
takes into account additional compiler flags that have been specified
via *_*_*_CC_XIPFLAGS. These will be passed after (and in addition to)
the ordinary CC_FLAGS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19637 6f19259b-4bc3-4df7-8a09-765794883524
The Clang preprocessor may rely on builtin defines that are target
dependent, so we should add the -target argument also when invoking
the preprocessor directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19584 6f19259b-4bc3-4df7-8a09-765794883524
Since we are combining Clang with the GNU linker, make that explicit in
the target triplet. This affects certain builtin defines and other compiler
behavior that may be unspecified otherwise.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19583 6f19259b-4bc3-4df7-8a09-765794883524
Updated the Makefile so that nmake will correctly fail if the cxfreeze command fails to complete successfully.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Larry Hauch <larry.hauch@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19501 6f19259b-4bc3-4df7-8a09-765794883524
edk2 Edk2Setup.bat depends on those scripts to configure VS env.
Update them to support VS2015.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19431 6f19259b-4bc3-4df7-8a09-765794883524
This extends the existing CLANG35 toolchain definition with support for
building for the ARM architecture. In order to be able to reuse the existing
ARM GCC definitions as much as possible, the following changes have been
made to the existing ARM GCC support:
- the -mapcs option has been removed; it is a no-op under Thumb (our default)
and we use AAPCS (-mabi=aapcs) anyway
- the -mword-relocations option has been moved from GCC_ARM_CC_FLAGS to
the GCC4x specific option: CLANG does not support it, and uses '-mllvm
-marm-use-movt=0' instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19284 6f19259b-4bc3-4df7-8a09-765794883524
This script uses python codecs to convert .uni string files between
the utf-16 and utf-8 formats.
The advantages of utf-8 data:
* Generally smaller files
* More commonly supported by editors
* Not treated as binary data in patch files
The script was tested on MdePkg with both python 2.7 and python 3.4.
It was able to convert all MdePkg .uni files between utf-8 and utf-16
multiple times always producing the same files for each format.
v2:
* Rename ConvertUtf16ToUtf8.py to ConvertUni.py
* Also support utf-8 to utf-16 conversion (with --utf-16)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19247 6f19259b-4bc3-4df7-8a09-765794883524
Fix a bug to ignore the lib ins defined in [components] section but also listed in SkipDir
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19238 6f19259b-4bc3-4df7-8a09-765794883524
Unlike GNU ld, which can be instructed to emit symbol based static
relocations into fully linked binaries using the --emit-relocs command
line switch, the RVCT armlink tool can only emit dynamic relocations
into the PT_DYNAMIC segment.
This has two consequences
. we can only identify absolute relocations, so there is no way to fix
up relative relocations between sections, or check their validity in
the PE/COFF layout
. the r_offset fields of the PT_DYNAMIC DT_REL entries are relative
either to the base of the image or to any of its segments but *not* to
the base of the input section that contains the location they refer
to, and converting them to PE/COFF image offsets is non-trivial unless
the sections are laid out in the same way in the ELF and PE/COFF
versions of the binary.
There is really only one way to deal with this, and that is to require
that the ELF and PE/COFF versions of the binary are identical in memory.
So enforce that in the code.
Also, fix the utterly broken relocation fixup code that dereferences
ELF32_R_SYM(r_info) both as a 1-based program header index and a 0-based
section header index. If this code ever produced working binaries, it
was purely by chance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19236 6f19259b-4bc3-4df7-8a09-765794883524
Up until SVN r18540, GenFw created invalid PE/COFF binaries for the ARM
architecture, by allowing PE/COFF .data sections to appear at offsets
that were not aligned to the global PE/COFF section alignment. The
reason for this was that the relocation metadata emitted by RVCT's
armlink only contains dynamic absolute relocations, so it is impossible
to recalculate relative relocations between .text and .data, and so the
relative offset between the two needs to be preserved.
Since r18540, we do align .data to the PE/COFF section alignment,
resulting in potentially corrupt PE/COFF binaries unless .data happens
to appear at a 32-byte aligned offset. So let's introduce a RVCT scatter
file that sets this alignment for the ELF .data section (and subsequent
.bss section).
At the same time, set the start offset to 0x220 bytes (which is the size
of our 32-bit PE/COFF header) so that the memory layouts are identical
between ELF and PE/COFF. Also add a 4 KB aligned version that can be
used to build DXE_RUNTIME_DRIVER modules with runtime memory protection
enabled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19235 6f19259b-4bc3-4df7-8a09-765794883524
The default behavior of the GCC compiler is to emit uninitialized globals
with external linkage into a COMMON section, where duplicate definitions
are merged. This may result in unexpected behavior, since global variables
defined under the same name in different C files may not refer to the same
logical data item.
For instance, the definitions of EFI_EVENT mVirtualAddressChangeEvent that
[used to] appear in the following files:
CryptoPkg/Library/BaseCryptLib/SysCall/RuntimeMemAllocation.c
MdeModulePkg/Universal/Variable/RuntimeDxe/VariableDxe.c
will be folded into a single instance of the variable when the latter
module includes the former library, which can lead to unexpected results.
Even if some may argue that there are legal uses for COMMON allocation, the
high modularity of EDK2 combined with the low level of awareness of the
intracicies surrounding common allocation and the generally poor EDK2
developer discipline regarding the use of the STATIC keyword* make a strong
case for disabling it by default, and re-enabling it explicitly for packages
that depend on it.
So prevent GCC from emitting variables into the COMMON section, by passing
-fno-common to the compiler, and discarding the section in the GNU ld linker
script.
* Any function or variable that is only referenced from the translation unit
that defines it could be made STATIC. This does not only prevent issues
like the above, it also allows the compiler to generate better code, e.g.,
drop out of line function definitions after inlining all invocations or
perform constant propagation on variables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19164 6f19259b-4bc3-4df7-8a09-765794883524
By the BUILDRULEORDER feature to process files listed in INF [Sources]
sections in priority order, if a filename is listed with multiple
extensions, the tools will use only the file that matches the first
extension in the space separated list.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19143 6f19259b-4bc3-4df7-8a09-765794883524
Fix a bug when applying patches to SEC modules that use the FILE_GUID
override. Since a temp dir is used when FILE_GUID override is used, the
INF file path comparisons fail. The fix is to capture the real INF file
path comparisons instead of using the temp dir path to the INF.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19142 6f19259b-4bc3-4df7-8a09-765794883524
When two vtf files in one FV image, no FV file can be generated, but it
report the stack trace info. so we enhance the tool to report error
message directly but not the stack trace info.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19141 6f19259b-4bc3-4df7-8a09-765794883524
Changed the if condition to check whether current Region is FD VPD region
to fix a bug in the VPD report generation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19139 6f19259b-4bc3-4df7-8a09-765794883524
When two vtf files in one FV image, no FV file can be generated, but it
report the stack trace info. so we enhance the tool to report error
message directly but not the stack trace info.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19137 6f19259b-4bc3-4df7-8a09-765794883524
FD region today can be file or data, but not a patched image.Add support
for an INF statement in an FD region, so the binary from the INF can be
patched prior to being added to the FD region.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19136 6f19259b-4bc3-4df7-8a09-765794883524
This allows a patch with binary data that is generated with --binary
to be parsed by the PatchCheck.py script.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19104 6f19259b-4bc3-4df7-8a09-765794883524
We have a new simple and effective method to resolve the original issue
that the PATH env's update error when the path contains space, so this
patch remove the last check in and use the new method to fix the original
issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19028 6f19259b-4bc3-4df7-8a09-765794883524
when multiple Dynamic PCD have different token space guid but same PCD
name, it is difficult for user to check why the generated autogen.c and
autogen.h are not consistent. so we add a check before generating
autogen.c and report error directly that user can know what happened
immediately.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19027 6f19259b-4bc3-4df7-8a09-765794883524
Build Spec already added a VPD report subsection of FLASH to the Report
chapter, it provide a simple way for user to determine where the VPD
region and VPD PCDs are located in the fd file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19026 6f19259b-4bc3-4df7-8a09-765794883524
R_ARM_REL32 are relative relocations, so we don't need to do anything
special when performing the ELF to PE/COFF conversion, since our memory
layout is identical between the two binary formats. So just allow them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18931 6f19259b-4bc3-4df7-8a09-765794883524
when we make BaseTools, it report warnings about VfrError.cpp and VolInfo,
so this patch fix this warning.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18851 6f19259b-4bc3-4df7-8a09-765794883524
Add new option --keepoptionalheader and that flag does not zero PE/COFF
optional header fields including the version fields. It can support the
case that the PE/COFF optional header would be kept.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18767 6f19259b-4bc3-4df7-8a09-765794883524
Older versions of binutils need all symbols to be defined when consuming
the linker script passed via the command line. So move the definition
'--defsym=PECOFF_HEADER_SIZE=...' before the '--script=...' command line
argument.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18747 6f19259b-4bc3-4df7-8a09-765794883524
Because the EDK II meta-data specifications already allow using decimal
values in the EDK II Meta-data file [Defines] section, this patch update
code to allow this usage.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18746 6f19259b-4bc3-4df7-8a09-765794883524
When PACKAGES_PATH is set, ECP pkg may be in another directory, not exist
in WORKSPACE. So, keep this check in single WORKSPACE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18731 6f19259b-4bc3-4df7-8a09-765794883524
when the absolute path is given to '-f', it would create some redundant
empty directories.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18675 6f19259b-4bc3-4df7-8a09-765794883524
Add new added MultipleWorkspace.py in the common dependency to freeze
python tools for Windows.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18663 6f19259b-4bc3-4df7-8a09-765794883524
We already added the extern declaration for protocols/PPI/GUID in AutoGen.h
file for driver, but missing this feature for the Library. so this patch
add it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18661 6f19259b-4bc3-4df7-8a09-765794883524
This script can be used to check some expected rules for EDK II
patches. It only works on git formatted patches.
It checks both the commit message and the lines that are added in the
patch diff.
In the commit message it verifies line lengths, signature formats, and
the Contributed-under tag.
In the patch, it checks that line endings are CRLF for all files that
don't have a .sh extension. It verifies that no trailing whitespace is
present and that tab characters are not used.
Patch contributors should use this script prior to submitting their
patches. Package maintainers can also use it to verify incoming
patches.
It can also be run by specifying a git revision list, so actual patch
files are not always required.
For example, to checkout this last 5 patches in your git branch you
can run:
python PatchCheck.py HEAD~5..
Or, a shortcut (like git log):
python PatchCheck.py -5
The --oneline option works similar to git log --oneline.
The --silent option enables silent operation.
The script supports python 2.7 and python 3.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Erik Bjorge <erik.c.bjorge@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18652 6f19259b-4bc3-4df7-8a09-765794883524
Current grammar for suppressif opcode not consistent in statement and option case, this patch fixed this issue. The same case also existed for other condition opcodes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18606 6f19259b-4bc3-4df7-8a09-765794883524
Use os.path.relpath to get the relative directory instead of directly trim it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18602 6f19259b-4bc3-4df7-8a09-765794883524
The handling of ARM MOVW/MOVT relocations sets the FixupData twice (once
incorrectly), but fails to advance the *FixupData pointer afterwards.
This is not actually a problem, since the fixup data is never used but
let's fix it anyway in case anyone reuses this code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18596 6f19259b-4bc3-4df7-8a09-765794883524
1. Update edksetup.bat and toolsetup.bat to handle PACKAGES_PATH.
BaseTools directory may be in PACKAGES_PATH instead of WORKSAPCE.
2. Introduce EDK_TOOLS_BIN env points to the windows binary tools dir.
Windows BaseTools Win32 may be a separate directory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Wu Hao A <hao.a.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18582 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Peter Kirmeier
Yonghong Zhu
Marvin Haeuser
Jordan Justen
Cohen, Eugene
Liming Gao
Michael Kinney
Larry Hauch
Laszlo Ersek
Michael LeMay
edk2 dev
Charles Duffy
Michael Thomas
Hao Wu
Hess Chen
Wang Yu
Eric Dong