1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase.
Add DebugAgentDxe driver to initialize Debug Agent in DXE phase.
DebugAgentDxe driver could be loaded and unloaded in shell.
2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE.
3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel.
4. Clear DR7 register in exception handler.
5. Set the default serial port parameter to 0 instead of PCDs.
6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function.
7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c.
8. Add one spin lock for accessing Mailbox when MP debugging supported.
9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell.
10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory.
11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase.
12.Add supporting on mode switch code debugging.
13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack.
14.Fix debug timer interrupt missing issue after back from legacy code.
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
Add required flags to [BuildOptions] in PythonCore.inf.
Add initialization routine to Efi/config.c.
Alter #include targets if building for UEFI in expat_external.h and xmlparse.c.
Add expat modifications to PyMod-2.7.2/Modules/expat.
Contributed-under: TianoCore Contribution Agreement 1.0
Submitted-by: Duane Voth <duanev@gmail.com>
Signed-off-by: daryl.mcdaniel@intel.com
Reviewed-by: duanev@gmail.com
Reviewed-by: daryl.mcdaniel@intel.com
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14071 6f19259b-4bc3-4df7-8a09-765794883524
set old variable to IN_DELETED_TRANSITION -> check if reclaim is needed(If yes, do reclaim) -> add new variable -> set old variable to DELETED if no reclaim happened.
to:
set old variable to IN_DELETED_TRANSITION -> check if reclaim is needed(If yes, do reclaim) -> add new variable -> set old variable to DELETED.
2. Update UpdateVariable() to correctly handle the case "both ADDED and IN_DELETED_TRANSITION variable are present", and delete both old ADDED and IN_DELETED_TRANSITION variable when deleting or updating variable.
3. Update VariableServiceGetNextVariableName() to return the valid IN_DELETED_TRANSITION variable if only IN_DELETED_TRANSITION variable is present.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14065 6f19259b-4bc3-4df7-8a09-765794883524
StdLib\Include\Containers\Fifo.h
Change return type of cFIFO_Truncate to size_t. Makes declaration match definition.
Update comment to describe what is returned.
StdLib\LibC\Uefi\InteractiveIO\IIOutilities.c
Change return type of IIO_CursorDelta to int. Makes declaration match definition.
Change other types from INT32 to int, for consistency.
Update comment for returned values.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: daryl.mcdaniel@intel.com
Reviewed-by: erik.c.bjorge@intel.com
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14060 6f19259b-4bc3-4df7-8a09-765794883524
The Xcode assembler is much pickier than GCC. Also the 64-bit
linker is not a fan of relocations so it is better to us IP
relative code, but at least it removes a relocation entry.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
[jordan.l.justen@intel.com: use .byte for retfq rather than lret]
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14055 6f19259b-4bc3-4df7-8a09-765794883524
We're supposed to zero everything in the kernel bootparams that we don't
explicitly initialise, other than the setup_header from 0x1f1 onwards
for a precisely defined length, which is copied from the bzImage.
We're *not* supposed to just pass the garbage that we happened to find
in the bzImage file surrounding the setup_header.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14052 6f19259b-4bc3-4df7-8a09-765794883524
Boot protocol 2.05 just means that the relocatable_kernel field is present
in the header. We should actually check that it's *set*.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14051 6f19259b-4bc3-4df7-8a09-765794883524
We currently just jump to offset 0x200 in the kernel image, in 64-bit
mode. This is completely broken. If it's a 32-bit kernel, we'll be
jumping into the compressed data payload.
If it's a 64-bit kernel, it'll work... but the 0x200 offset is
explicitly marked as 'may change in the future', has already changed
from 0x100 to 0x200 in the past with no fanfare, and bootloaders are
instructed that they should look at the ELF header to find the offset.
So although it does actually work today, it's still broken in the
"someone needs to whipped for doing it this way" sense of the word.
In fact, the same bug exists in other bootloaders so the 0x200 offset
probably *is* now set in stone. But still it's only valid to use it if
we *know* it's a 64-bit kernel. And we don't. There *is* no ELF header
that we can look at when we're booting a bzImage, and we can't rely on
it having a PE/COFF header either.
The 32-bit entry point is always guaranteed to work, and we need to
support it anyway. So let's just *always* use it, in 32-bit mode, and
then we don't have to make up some horrible heuristics for detecting
32-bit vs. 64-bit kernels.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14045 6f19259b-4bc3-4df7-8a09-765794883524
2. Add “Current SecureBoot State” field to reflect current secure boot status of the platform.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Dong Guo <guo.dong@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14042 6f19259b-4bc3-4df7-8a09-765794883524
1. Client must ignore any Advertise message that includes a Status Code option containing the value NoAddrsAvail.
2. The elapsed-time should start from the current DHCP transaction.
3. Client should not change any information about addresses the client has recorded in the IA but not included in the IA from the server.
4. Client need to update to handle the error status code UnspecFail/UseMulticast/NotOnLink/NoBinding in the Reply message from server.
5. When the client receives a Reply message in response to a Renew/ Rebind message, the client examines each IA independently. For each IA in the original Renew/ Rebind message, the client sends a Renew/ Rebind if the IA is not in the Reply message.
6. Client should uses network byte order in IANA T1/T2 option
7. Client should discard any addresses for which the preferred lifetime is greater than the valid lifetime.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14039 6f19259b-4bc3-4df7-8a09-765794883524
2. When no DELETED variable found, no variable space could be reclaimed, so just give some debug info and return EFI_SUCCESS.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14029 6f19259b-4bc3-4df7-8a09-765794883524
sfu5
lzeng14
vanjeff
ydong10
gdong1
andrewfish
li-elvin
darylm503
jcarsey
jljusten
tye1
niruiyu