When loading an image from a file, close the file after reading from it.
Use OpenProtocol instead of HandleProtocol to retrieve the simple file
system protocol interface.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16586 6f19259b-4bc3-4df7-8a09-765794883524
Fix DHCP4 configuration as part of TFTP boot process to get the IP address of
the gateway and the subnet mask from the DHCP server.
Fix a memory leak when the download from the TFTP server fails as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16582 6f19259b-4bc3-4df7-8a09-765794883524
and follow UEFI spec to check UEFI defined variables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16580 6f19259b-4bc3-4df7-8a09-765794883524
and follow UEFI spec to check UEFI defined variables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16579 6f19259b-4bc3-4df7-8a09-765794883524
A number of tools depend on passing the kernel image, the initial ramdisk,
and the kernel command line to the guest on the QEMU command line (options
-kernel, -initrd, -append, respectively). At the moment, these QEMU
options work, but the guest kernel loaded this way is launched by a
minimal binary firmware that is dynamically composed by QEMU. As a
consequence, such a kernel has no UEFI environment.
This patch enables -kernel, -initrd, -append to work on top of the
ArmVirtualizationQemu firmware build. The approach it takes is different
from how the same functionality is implemented in OvmfPkg.
OvmfPkg contains a full-fledged Linux boot loader (see
"OvmfPkg/Library/PlatformBdsLib/QemuKernel.c" and
"OvmfPkg/Library/LoadLinuxLib/"). OVMF's LoadLinuxLib sets up the required
kernel environment in a sophisticated way (including x86-specific
artifacts like the GDT), calls ExitBootServices() itself (for legacy
kernels without EFI handover protocol), and jumps to the kernel (using x86
assembly).
In ArmVirtualizationPkg's PlatformIntelBdsLib, we require the kernel being
loaded to have an EFI stub -- that is, to be a genuine UEFI application.
(The EFI stub is not an additional burden for guest kernels -- the EFI
stub is a hard requirement anyway because it needs to process the DTB
heavily:
- it removes memory nodes,
- it removes memreserve entries,
- it adds UEFI properties to the "chosen" node,
- it calculates and installs virt-to-phys mappings with
SetVirtualAddressMap() in a way that enables kexec [planned].
Kudos to Ard Biesheuvel for summarizing the above.)
An EFI-stubbed Linux guest kernel can be loaded with plain
gBS->LoadImage(). The EFI stub will look up its own
EFI_LOADED_IMAGE_DEVICE_PATH_PROTOCOL instance (ie. the device path where
it has been loaded from), and it will locate the initial ramdisk named by
the "initrd" command line parameter as a *sibling file* on the same
device.
The initrd file is then loaded using the EFI_SIMPLE_FILE_SYSTEM_PROTOCOL.
This approach enables the EFI stub to load the initial ramdisk from normal
EFI System Partitions, from remote PXE/TFTP directories -- and it enables
us to provide the initrd from memory as well.
In this patch:
- We download the kernel image, the initrd image, and the kernel command
line, using QEMU's fw_cfg interface.
- We create a read-only EFI_SIMPLE_FILE_SYSTEM_PROTOCOL instance that has
just a root directory, with the three downloaded files in it.
- The handle that carries the simple file system has a single-node
VenHw(...) device path (not counting the terminator node).
- We load the EFI-stubbed kernel (which is a UEFI application) with
gBS->LoadImage(), passing "VenHw(...)/kernel" as device path. This
causes gBS->LoadImage() to call back into our filesystem.
- Appended to the downloaded command line, we pass "initrd=initrd" to the
EFI stub.
- Once the EFI stub is running, it loads the initial ramdisk from the
"sibling" device path "VenHw(...)/initrd", also calling back into our
filesystem.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16578 6f19259b-4bc3-4df7-8a09-765794883524
The default value of this PCD (in "IntelFrameworkModulePkg.dec")
identifies the "old shell" from EdkShellBinPkg. Our build includes the
"new" shell from ShellBinPkg/UefiShell/UefiShell.inf; let's specify the
FILE_GUID of that.
Otherwise, no boot option will be generated for the Shell application.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16577 6f19259b-4bc3-4df7-8a09-765794883524
We have all the required pieces in place. Let's call
SetBootOrderFromQemu() in PlatformBdsPolicyBehavior().
We disable OFW-to-UEFI device path fragment translation for virtio-pci,
and enable it only virtio-mmio at this time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16576 6f19259b-4bc3-4df7-8a09-765794883524
The TranslateMmioOfwNodes() function recognizes the following OpenFirmware
device paths:
virtio-blk: /virtio-mmio@000000000a003c00/disk@0,0
virtio-scsi disk: /virtio-mmio@000000000a003a00/channel@0/disk@2,3
virtio-net NIC: /virtio-mmio@000000000a003e00/ethernet-phy@0
The new translation can be enabled with the
"PcdQemuBootOrderMmioTranslation" Feature PCD. This PCD also controls if
the "survival policy" covers unselected boot options that start with the
virtio-mmio VenHw() node.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16575 6f19259b-4bc3-4df7-8a09-765794883524
The OpenFirmware device path nodes that QEMU generates for virtio-mmio
transports contain 64-bit hexadecimal values (16 nibbles) -- the base
addresses of the register blocks. In order to parse them soon,
ParseUnitAddressHexList() must parse UINT64 values.
Call sites need to be adapted, as expected.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16574 6f19259b-4bc3-4df7-8a09-765794883524
Installing VenHw() device paths with this GUID, for the virtio-mmio
transports that we detect, enables other modules to recognize those
VenHw() nodes. (Note that the actual value doesn't change.)
In addition, to avoid reusing GUIDs in unrelated contexts, detach the
driver's FILE_GUID from its previous value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16573 6f19259b-4bc3-4df7-8a09-765794883524
Soon there will be more than one modules (in separate packages) that need
to have an understanding about the GUID used in the VenHw() device path
nodes that describe virtio-mmio transports. Define such a GUID explicitly.
Preserve the current value (which happens to be the FILE_GUID of
ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf) for
compatibility with external users.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16572 6f19259b-4bc3-4df7-8a09-765794883524
In preparation for adding OpenFirmware-to-UEFI translation for "MMIO-like"
OFW device path fragments, let's turn the currently exclusive "PCI-like"
translation into "just one" of the possible translations.
- Rename TranslateOfwNodes() to TranslatePciOfwNodes(), because it is
tightly coupled to "PCI-like" translations.
- Rename REQUIRED_OFW_NODES to REQUIRED_PCI_OFW_NODES, because this macro
is specific to TranslatePciOfwNodes().
- Introduce a new wrapper function under the original TranslateOfwNodes()
name. This function is supposed to try translations in some order until
a specific translation returns a status different from
RETURN_UNSUPPORTED.
- Introduce a new Feature PCD that controls whether PCI translation is
attempted at all.
- The boot option "survival policy" in BootOrderComplete() must take into
account if the user was able to select PCI-like boot options. If the
user had no such possibility (because the Feature PCD was off for
PCI-like translation), then we ought to keep any such unselected boot
options.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16571 6f19259b-4bc3-4df7-8a09-765794883524
and rebase OvmfPkg's PlatformBdsLib on the standalone library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16570 6f19259b-4bc3-4df7-8a09-765794883524
In PlatformBdsPolicyBehavior() we should follow the same pattern as in
OvmfPkg's: after the consoles are connected,
- connect all drivers and devices,
- enumerate all boot options,
- enter the Intel BDS FrontPage if the user presses a key different from
Enter.
We set the countdown to 3 seconds, similarly to the timeout that we
specify for ARM BDS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16569 6f19259b-4bc3-4df7-8a09-765794883524
In the next patch(es) we'll customize the PlatformBdsLib instance used by
ArmVirtualizationQemu.dsc. Let's clone it first verbatim from
ArmPlatformPkg/Library/PlatformIntelBdsLib, changing only its FILE_GUID.
(Also, coding style errors like "missing space before open parenthesis"
and "missing space after comma or semicolon" have been cleaned up.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16568 6f19259b-4bc3-4df7-8a09-765794883524
After reviewing OvmfPkg's use of its own QemuFwCfgLib instances, it is
clear that its only pre-DXE fw_cfg dependency concerns S3 support (the
QemuFwCfgS3Enabled() call in "PlatformPei/Platform.c").
For ARM guests, S3 is in the distant future, but we can see several
shorter term applications for fw_cfg that all reside in DXE:
- controlling boot order (to be implemented in PlatformBdsLib for Intel
BDS),
- supporting -kernel / -initrd / -append boot on QEMU (to be implemented
in PlatformBdsLib for Intel BDS, similarly),
- loading and linking ACPI tables,
- installing SMBIOS tables.
Therefore it makes sense to add a simple MMIO-based fw_cfg client library
to ArmVirtualizationPkg that for the moment is only available to
DXE_DRIVER modules.
Because MMIO accesses are costly on KVM/ARM, InternalQemuFwCfgReadBytes()
accesses the fw_cfg data register in full words. This speeds up transfers
almost linearly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16567 6f19259b-4bc3-4df7-8a09-765794883524
Qemu's firmware configuration interface for ARM consists of two MMIO
registers, a 16-bit selector, and a 64-bit data register that allows the
guest to transfer data with 8, 16, 32, and 64-bit wide accesses. Parse the
base address from the DTB, and expose the registers to the rest of DXE via
dynamic PCDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16566 6f19259b-4bc3-4df7-8a09-765794883524
This patch update the code in function 'ContainsSplit', and make 'ContainsSplit' depend on 'FindNextInstance'. So we move 'FindNextInstance' in front of 'ContainsSplit'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16560 6f19259b-4bc3-4df7-8a09-765794883524
This patch added one new X509GetTBSCert() interface in BaseCryptLib to retrieve the TBSCertificate,
and also corrected the hash calculation for revoked certificate to aligned the RFC3280 and UEFI 2.4 spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Long, Qin" <qin.long@intel.com>
Reviewed-by: "Dong, Guo" <guo.dong@initel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16559 6f19259b-4bc3-4df7-8a09-765794883524
This patch make sure the TPL been raised and restored in pair.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Deric Cole <Deric_Cole@phoenix.com>
Reviewed-by: Elvin Li <elvin.li@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16556 6f19259b-4bc3-4df7-8a09-765794883524
Because IsDevicePathValid() calls this API we should leave the device path validation in the caller.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16555 6f19259b-4bc3-4df7-8a09-765794883524
This module implements Simple FileSystem protocol over Firmware Volume (FV).
EFI Modules included into a FV can be listed and launched from the EFI Shell or any other EFI applications.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16547 6f19259b-4bc3-4df7-8a09-765794883524
There are several network stack drivers in MdeModulePkg or NetworkPkg.
Currently, we only use the drivers from MdeModulePkg which only provides
the IPv4 support. This commit adds the IPv6 drivers in NetworkPkg into
OVMF.
Here is the table of drivers from Laszlo.
currently included related driver add or replace
from MdeModulePkg in NetworkPkg from NetworkPkg
------------------ -------------- ---------------
SnpDxe n/a n/a
DpcDxe n/a n/a
MnpDxe n/a n/a
VlanConfigDxe n/a n/a
ArpDxe n/a n/a
Dhcp4Dxe Dhcp6Dxe add
Ip4ConfigDxe Ip6Dxe add
Ip4Dxe Ip6Dxe add
Mtftp4Dxe Mtftp6Dxe add
Tcp4Dxe TcpDxe replace
Udp4Dxe Udp6Dxe add
UefiPxeBcDxe UefiPxeBcDxe replace
IScsiDxe IScsiDxe replace
Since the TcpDxe, UefiPxeBcDxe, and IScsiDxe drivers in NetworkPkg also
support IPv4, we replace the ones in MdeModulePkg.
To enable the IPv6 support, build OVMF with "-D NETWORK_IP6_ENABLE".
A special case is NetworkPkg/IScsiDxe. It requires openssl. For convenience,
NetworkPkg/IScsiDxe is enabled only if both IPv6 and SecureBoot are enabled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
[lersek@redhat.com: typo fix in commit message; specil -> special]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16543 6f19259b-4bc3-4df7-8a09-765794883524
1.Add code to cover the space which is not covered by browser before.
2.Remove ESC help string for front page screen.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16541 6f19259b-4bc3-4df7-8a09-765794883524
Setting a bit in the PxSACT register for a command in the command list indicates
to the controller that the command list slot contains a native queued command (NCQ).
This can cause problems with some controllers (one such controller is the Marvell 9128).
Since NCQ commands are not used, don't set the PxACT register for commands issued.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Ruffin <chris.ruffin@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16536 6f19259b-4bc3-4df7-8a09-765794883524
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16535 6f19259b-4bc3-4df7-8a09-765794883524
Olivier Martin
Ronald Cron
Star Zeng
Laszlo Ersek
Dong Guo
Qiu Shumin
Feng Tian
Eric Dong
Long, Qin
Deric Cole
Ruiyu Ni
Hot Tian
Cinnamon Shia
Yao, Jiewen
Brendan Jackman
Aaron Pop
Gary Lin
Chris Ruffin
Jeff Fan