There are cases that the operands of an expression are all with rank less
than UINT64/INT64 and the result of the expression is explicitly cast to
UINT64/INT64 to fit the target size.
An example will be:
UINT32 a,b;
// a and b can be any unsigned int type with rank less than UINT64, like
// UINT8, UINT16, etc.
UINT64 c;
c = (UINT64) (a + b);
Some static code checkers may warn that the expression result might
overflow within the rank of "int" (integer promotions) and the result is
then cast to a bigger size.
The commit refines codes by the following rules:
1). When the expression is possible to overflow the range of unsigned int/
int:
c = (UINT64)a + b;
2). When the expression will not overflow within the rank of "int", remove
the explicit type casts:
c = a + b;
3). When the expression will be cast to pointer of possible greater size:
UINT32 a,b;
VOID *c;
c = (VOID *)(UINTN)(a + b); --> c = (VOID *)((UINTN)a + b);
4). When one side of a comparison expression contains only operands with
rank less than UINT32:
UINT8 a;
UINT16 b;
UINTN c;
if ((UINTN)(a + b) > c) {...} --> if (((UINT32)a + b) > c) {...}
For rule 4), if we remove the 'UINTN' type cast like:
if (a + b > c) {...}
The VS compiler will complain with warning C4018 (signed/unsigned
mismatch, level 3 warning) due to promoting 'a + b' to type 'int'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
To convert these files I ran:
$ python3 BaseTools/Scripts/ConvertUni.py SourceLevelDebugPkg
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19263 6f19259b-4bc3-4df7-8a09-765794883524
Use CPU Local APIC timer to handle timeout when read data from debug port, instead of the TimerLib in Debug Communication lib instances.
It could remove much duplicated code in Debug Communication Lib instances.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17089 6f19259b-4bc3-4df7-8a09-765794883524
Module UNI and Package UNI files are not DOS format. Convert them to DOS format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16048 6f19259b-4bc3-4df7-8a09-765794883524
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.
3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15939 6f19259b-4bc3-4df7-8a09-765794883524
1. Usage information in INF file comment blocks are either incomplete or incorrect.
This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes.
The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15937 6f19259b-4bc3-4df7-8a09-765794883524
1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase.
Add DebugAgentDxe driver to initialize Debug Agent in DXE phase.
DebugAgentDxe driver could be loaded and unloaded in shell.
2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE.
3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel.
4. Clear DR7 register in exception handler.
5. Set the default serial port parameter to 0 instead of PCDs.
6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function.
7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c.
8. Add one spin lock for accessing Mailbox when MP debugging supported.
9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell.
10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory.
11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase.
12.Add supporting on mode switch code debugging.
13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack.
14.Fix debug timer interrupt missing issue after back from legacy code.
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old.
New HOST software will implement logic to handle all other revision mismatch cases.
2. Define new debug message packet to print the debug agent trace information by debug port channel.
3. Add check sum mechanism in the communication protocol between TARGET/HOST.
4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command.
5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach.
6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library.
7. Enable CPUID feature.
8. Enable the hardware data breakpoint.
9. add handshake to improve usb debug cable identify stability issue.
10.Refine all the communication protocol packet to improve extensibility and debugging performance.
a. Use 64bit for IO port address.
b. Add additional Width field to READ_MEMORY/WRITE_MEMORY.
c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach.
d. Remove READ_GROUP register.
e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers).
11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag.
12.Fix IO break point does not work issue in PEI phase.
13.Avoid BSP/APs collision when they met break point at the same time.
14.Solve a bug of calculating debug handle in sec phase.
15.Use mailbox content at Dxe phase but not clear it and reinitialize again.
16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg.
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2. Fixed issue that Ovmf with debug agent cannot boot if HOST software was not connected.
Signed-off-by: vanjeff
Reviewed-by: geekboy15a
Reviewed-by: erictian
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12486 6f19259b-4bc3-4df7-8a09-765794883524
Hao Wu
Gary Lin
Laszlo Ersek
Jordan Justen
Jeff Fan
Shumin Qiu
Gao, Liming
Eric Dong
Ruiyu Ni
niruiyu
vanjeff
erictian