Add QemuRamfbDxe device path to the list of platform console devices,
so ConSplitter will pick up the device even though it isn't a PCI GPU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Consumers of status code reports may rely on a status code to be
reported when the ReadyToBoot event is signalled. For instance,
FirmwarePerformanceDxe will fail to install the FPDT ACPI table
in this case. So add the missing call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add a library class, and a UEFI_DRIVER lib instance, that are layered on
top of PciCapLib, and allow clients to plug an EFI_PCI_IO_PROTOCOL backend
into PciCapLib, for config space access.
(Side note:
Although the UEFI spec says that EFI_PCI_IO_PROTOCOL_CONFIG() returns
EFI_UNSUPPORTED if "[t]he address range specified by Offset, Width, and
Count is not valid for the PCI configuration header of the PCI
controller", this patch doesn't directly document the EFI_UNSUPPORTED
error code, for ProtoDevTransferConfig() and its callers
ProtoDevReadConfig() and ProtoDevWriteConfig(). Instead, the patch refers
to "unspecified error codes". The reason is that in edk2, the
PciIoConfigRead() and PciIoConfigWrite() functions [1] can also return
EFI_INVALID_PARAMETER for the above situation.
Namely, PciIoConfigRead() and PciIoConfigWrite() first call
PciIoVerifyConfigAccess(), which indeed produces the standard
EFI_UNSUPPORTED error code, if the device's config space is exceeded.
However, if PciIoVerifyConfigAccess() passes, and we reach
RootBridgeIoPciRead() and RootBridgeIoPciWrite() [2], then
RootBridgeIoCheckParameter() can still fail, e.g. if the root bridge
doesn't support extended config space (see commit 014b472053).
For all kinds of Limit violations in IO, MMIO, and config space,
RootBridgeIoCheckParameter() returns EFI_INVALID_PARAMETER, not
EFI_UNSUPPORTED. That error code is then propagated up to, and out of,
PciIoConfigRead() and PciIoConfigWrite().
[1] MdeModulePkg/Bus/Pci/PciBusDxe/PciIo.c
[2] MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a library class, and a BASE lib instance, that are layered on top of
PciCapLib, and allow clients to plug a PciSegmentLib backend into
PciCapLib, for config space access.
(Side note:
The "MaxDomain" parameter is provided because, in practice, platforms
exist where a PCI Express device may show up on a root bridge such that
the root bridge doesn't support access to extended config space. Earlier
the same issue was handled for MdeModulePkg/PciHostBridgeDxe in commit
014b472053. However, that solution does not apply to the PciSegmentLib
class, because:
(1) The config space accessor functions of the PciSegmentLib class, such
as PciSegmentReadBuffer(), have no way of informing the caller whether
access to extended config space actually succeeds.
(For example, in the UefiPciSegmentLibPciRootBridgeIo instace, which
could in theory benefit from commit 014b472053, the
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Read() status code is explicitly
ignored, because there's no way for the lib instance to propagate it
to the PciSegmentLib caller. If the
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Read() call fails, then
DxePciSegmentLibPciRootBridgeIoReadWorker() returns Data with
indeterminate value.)
(2) There is no *general* way for any firmware platform to provide, or
use, a PciSegmentLib instance in which access to extended config space
always succeeds.
In brief, on a platform where config space may be limited to 256 bytes,
access to extended config space through PciSegmentLib may invoke undefined
behavior; therefore PciCapPciSegmentLib must give platforms a way to
prevent such access.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a library class, and a BASE lib instance, to work more easily with PCI
capabilities in PCI config space. Functions are provided to parse
capabilities lists, and to locate, describe, read and write capabilities.
PCI config space access is abstracted away.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Call Tcg2PhysicalPresenceLibProcessRequest() to process pending PPI
requests from PlatformBootManagerAfterConsole().
Laszlo understanding of edk2 is that the PPI operation processing was
meant to occur *entirely* before End-Of-Dxe, so that 3rd party UEFI
drivers couldn't interfere with PPI opcode processing *at all*.
He suggested that we should *not* call
Tcg2PhysicalPresenceLibProcessRequest() from BeforeConsole(). Because,
an "auth" console, i.e. one that does not depend on a 3rd party
driver, is *in general* impossible to guarantee. Instead we could opt
to trust 3rd party drivers, and use the "normal" console(s) in
AfterConsole(), in order to let the user confirm the PPI requests. It
will depend on the user to enable Secure Boot, so that the
trustworthiness of those 3rd party drivers is ensured. If an attacker
roots the guest OS from within, queues some TPM2 PPI requests, and
also modifies drivers on the EFI system partition and/or in GPU option
ROMs (?), then those drivers will not load after guest reboot, and
thus the dependent console(s) won't be used for confirming the PPI
requests.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cloned "SecurityPkg/Library/DxeTcg2PhysicalPresenceLib" and:
- removed all the functions that are unreachable from
Tcg2PhysicalPresenceLibProcessRequest() [called from platform BDS],
or SubmitRequestToPreOSFunction() and
ReturnOperationResponseToOsFunction() [called from Tcg2Dxe].
- replaced everything that's related to the
TCG2_PHYSICAL_PRESENCE*_VARIABLE variables, with direct access to
the QEMU structures.
This commit is based on initial experimental work from Stefan Berger.
In particular, he wrote most of QEMU PPI support, and designed the
qemu/firmware interaction. Initially, Stefan tried to reuse the
existing SecurityPkg code, but we eventually decided to get rid of the
variables and simplify the ovmf/qemu version.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[lersek@redhat.com: clean up non-idiomatic coding style]
[lersek@redhat.com: null mPpi on invalid PPI address]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This NULL library will let us call
Tcg2PhysicalPresenceLibProcessRequest() unconditionally from
BdsPlatform when building without TPM2_ENABLE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[lersek@redhat.com: replace MdeModulePkg.dec w/ MdePkg.dec]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Virtio RNG devices are never boot devices, so in commit 245c643cc8 we
stopped connecting them. This is a problem because an OS boot loader may
depend on EFI_RNG_PROTOCOL to seed the OS's RNG.
Connect Virtio RNG devices again. And, while commit 245c643cc8 removed
that from PlatformBootManagerAfterConsole(), reintroduce it now to
PlatformBootManagerBeforeConsole() -- this way Driver#### options launched
between both functions may access EFI_RNG_PROTOCOL too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 245c643cc8
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1579518
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
If both ConIn and ConOut exist, but ConIn references none of the PS/2
keyboard, the USB wild-card keyboard, and any serial ports, then
PlatformInitializeConsole() currently allows the boot to proceed without
any input devices at all. This makes for a bad user experience -- the
firmware menu could only be entered through OsIndications, set by a guest
OS.
Do what ArmVirtQemu does already, namely connect the consoles, and add
them to ConIn / ConOut / ErrOut, unconditionally. (The underlying
EfiBootManagerUpdateConsoleVariable() function checks for duplicates.)
The issue used to be masked by the EfiBootManagerConnectAll() call that
got conditionalized in commit 245c643cc8.
This patch is best viewed with "git show -b -W".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 245c643cc8
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1577546
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PlatformInitializeConsole() (called by PlatformBootManagerBeforeConsole())
adds elements of "gPlatformConsole" to ConIn / ConOut / ErrOut (as
requested per element) if at boot at least one of ConIn and ConOut doesn't
exist. This typically applies to new VMs, and VMs with freshly recreated
varstores.
Add a USB keyboard wildcard to ConIn via "gPlatformConsole", so that we
not only bind the PS/2 keyboard. (The PS/2 keyboard is added in
PrepareLpcBridgeDevicePath()). Explicitly connecting the USB keyboard is
necessary after commit 245c643cc8.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Read the list of trusted cipher suites from fw_cfg and to store it to
EDKII_HTTP_TLS_CIPHER_LIST_VARIABLE.
The fw_cfg file will be formatted by the "update-crypto-policies" utility
on the host side, so that the host settings take effect in guest HTTPS
boot as well. QEMU forwards the file intact to the firmware. The contents
are forwarded by NetworkPkg/HttpDxe (in TlsConfigCipherList()) to
NetworkPkg/TlsDxe (TlsSetSessionData()) and TlsLib (TlsSetCipherList()).
Note: the development of the "update-crypto-policies" feature is underway
at this time. Meanwhile the following script can be used to generate the
binary file for fw_cfg:
export LC_ALL=C
openssl ciphers -V \
| sed -r -n \
-e 's/^ *0x([0-9A-F]{2}),0x([0-9A-F]{2}) - .*$/\\\\x\1 \\\\x\2/p' \
| xargs -r -- printf -- '%b' > ciphers.bin
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
[lersek@redhat.com: update commit msg and add script as requested by Gary]
[lersek@redhat.com: update commit msg as requested by Jiaxin]
Introduce TlsAuthConfigLib to read the list of trusted CA certificates
from fw_cfg and to store it to EFI_TLS_CA_CERTIFICATE_VARIABLE.
The fw_cfg file is formatted by the "p11-kit" and "update-ca-trust"
utilities on the host side, so that the host settings take effect in guest
HTTPS boot as well. QEMU forwards the file intact to the firmware. The
contents are sanity-checked by NetworkPkg/HttpDxe code that was added in
commit 0fd13678a6.
Link TlsAuthConfigLib via NULL resolution into TlsAuthConfigDxe. This sets
EFI_TLS_CA_CERTIFICATE_VARIABLE in time for both
NetworkPkg/TlsAuthConfigDxe (for possible HII interaction with the user)
and for NetworkPkg/HttpDxe (for the effective TLS configuration).
The file formatted by "p11-kit" can be large. On a RHEL-7 host, the the
Mozilla CA root certificate bundle -- installed with the "ca-certificates"
package -- is processed into a 182KB file. Thus, create
EFI_TLS_CA_CERTIFICATE_VARIABLE as a volatile & boot-time only variable.
Also, in TLS_ENABLE builds, set the cumulative limit for volatile
variables (PcdVariableStoreSize) to 512KB, and the individual limit for
the same (PcdMaxVolatileVariableSize) to 256KB.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Initialize local variable to suppress warning C4701/C4703:
potentially uninitialized local variable/pointer variable.
1.In VirtualMemory.c:
Read of "PageMapLevel4Entry" in SetMemoryEncDe() is only
reached when "PageMapLevel4Entry" is got correctly.
2.In VirtioBlk.c:
Reads (dereferences) of "BufferMapping" and "BufferDeviceAddress"
in SynchronousRequest() are only reached if "BufferSize > 0" *and*
we map the data buffer successfully.
3.In VirtioScsi.c:
Reads (dereferences) of "InDataMapping" and "InDataDeviceAddress",
in VirtioScsiPassThru() are only reached if
"Packet->InTransferLength > 0" on input, *and* we map the
input buffer successfully. The similar reason for "OutDataMapping"
and "OutDataDeviceAddress".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This improves the UEFI boot time for VMs that have "-kernel", many disks
or NICs, and no "bootindex" properties.
(Unlike in ArmVirt commit 23d04b58e2, in OvmfPkg commit 52fba28994 we
introduced TryRunningQemuKernel() right from the start *after*
BdsLibConnectAll(). Therefore, unlike in patch
'ArmVirtPkg/PlatformBootManagerLib: return to "-kernel before boot
devices"', we adopt the logic as new in this patch.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
PlatformBootManagerAfterConsole()
<--------------------------------+
PlatformBdsConnectSequence() |
ConnectDevicesFromQemu() / EfiBootManagerConnectAll() |
PciAcpiInitialization() ---------------------------------+
TryRunningQemuKernel()
Functionally this is a no-op:
- PciAcpiInitialization() iterates over PciIo protocol instances, which
are available just the same at the new call site.
- The PCI interrupt line register exists only to inform system software
(it doesn't affect hardware) and UEFI drivers don't use PCI interrupts
anyway.
(More background in commits 2e70cf8ade and 5218c27950c4.)
This change will let us move TryRunningQemuKernel() between
PciAcpiInitialization() and PlatformBdsConnectSequence() in the next
patch.
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
The old-style "Routine Description: ..." comments use the leftmost column
and are placed between the parameter list and the function body. Therefore
they cause git-diff to produce bogus hunk headers that fail to name the
function being patched.
Convert these comment blocks to the current edk2 style. While at it, clean
them up too.
For PlatformBootManagerBeforeConsole() and
PlatformBootManagerAfterConsole(), copy the descriptions from the call
sites in "MdeModulePkg/Universal/BdsDxe/BdsEntry.c". They are more
detailed than the comments in the lib class header
"MdeModulePkg/Include/Library/PlatformBootManagerLib.h"; ArmVirtPkg
already uses these comments.
No functional changes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
Use ZeroMem() to initialize (or re-initialize) all fields in temporary
PCI_ROOT_BRIDGE_APERTURE variables to zero. This is not mandatory but
is helpful for future extension: when we add new fields to
PCI_ROOT_BRIDGE_APERTURE and the default value of these fields can
safely be zero, this code will not suffer from an additional
change.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
QemuBootOrderLib expects PlatformBootManagerLib to call the following
triplet:
(1) EfiBootManagerConnectAll(),
(2) EfiBootManagerRefreshAllBootOption(),
(3) SetBootOrderFromQemu().
This leads to bad performance, when many devices exist such that the
firmware can drive them, but they aren't marked for booting in the
"bootorder" fw_cfg file. Namely,
(1) EfiBootManagerConnectAll() talks to all hardware, which takes long.
Plus some DriverBindingStart() functions write NV variables, which is
also slow. (For example, the IP config policy for each NIC is stored
in an NV var that is named after the MAC).
(2) EfiBootManagerRefreshAllBootOption() generates boot options from the
protocol instances produced by (1). Writing boot options is slow.
(3) Under the above circumstances, SetBootOrderFromQemu() removes most of
the boot options produced by (2). Erasing boot options is slow.
Introduce ConnectDevicesFromQemu() as a replacement for (1): only connect
devices that the QEMU user actually wants to boot off of.
(There's a slight loss of compatibility when a platform switches from
EfiBootManagerConnectAll() to ConnectDevicesFromQemu().
EfiBootManagerConnectAll() may produce UEFI device paths that are unknown
to QemuBootOrderLib (that is, for neither PCI- nor virtio-mmio-based
devices). The BootOrderComplete() function lets such unmatched boot
options survive at the end of the boot order. With
ConnectDevicesFromQemu(), these options will not be auto-generated in the
first place. They may still be produced by other means.
SetBootOrderFromQemu() is not modified in any way; reordering+filtering
boot options remains a separate task.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiang Zheng <xiang.zheng@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # ArmVirtQemu
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Xiang Zheng <xiang.zheng@linaro.org>
The "/MAC(" suffix of the translated UEFI devpath prefix is unnecessary
for matching, because the virtio-mmio base address in VenHwString is
unique anyway. Furthermore, the partial string "MAC(" cannot be processed
by ConvertTextToDevicePath(), which will become relevant later in this
series. Remove "/MAC(".
While at it, remove a bogus comment on PCI.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiang Zheng <xiang.zheng@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # ArmVirtQemu
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Xiang Zheng <xiang.zheng@linaro.org>
Among other things, the header file declares the functions that implement
the VIRTIO_DEVICE_PROTOCOL members over virtio-mmio. The functions are
defined in "VirtioMmioDeviceFunctions.c", and referenced in the
initialization of "mMmioDeviceProtocolTemplate", in "VirtioMmioDevice.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the CreateExtraRootBusMap(),
DestroyExtraRootBusMap(), and MapRootBusPosToBusNr() functions. They are
defined in "ExtraRootBusMap.c", and called from "QemuBootOrderLib.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, "DebugLibDetect.h" declares the
PlatformDebugLibIoPortFound() function. The function is called from
"DebugLib.c", which is included in both library instances. The function is
defined separately per library instance, in "DebugLibDetectRom.c" and
"DebugLibDetect.c", respectively.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares LoadNvVarsFromFs() and SaveNvVarsToFs(), which
are defined in "FsAccess.c" and called from "NvVarsFileLib.c".
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file declares the AllocateAcpiNvsPool()
function. This function is called from the "LockBoxLib.c" source file (in
the implementation of the SaveLockBox() library API), which is built into
both library instances. AllocateAcpiNvsPool() is implemented separately
per library instance, in "LockBoxBase.c" and "LockBoxDxe.c", respectively.
(In the LockBoxBaseLib instance, the AllocateAcpiNvsPool() function is
never expected to be called -- the public SaveLockBox() API should never
be called before the DXE phase --, we just have to provide a stub for
linking purposes.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the InitLinuxDescriptorTables() and
SetLinuxDescriptorTables() functions, which are called from "Linux.c" and
implemented in "LinuxGdt.c".
The header file also declares the JumpToKernel() and JumpToUefiKernel()
functions, which are similarly called from "Linux.c". They are implemented
(dependent on architecture) in "Ia32/JumpToKernel.nasm" and
"X64/JumpToKernel.nasm".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file declares the
InternalMemEncryptSevSetMemoryDecrypted() and
InternalMemEncryptSevSetMemoryEncrypted() functions. The functions are
called from "X64/MemEncryptSevLib.c", and defined in
"X64/VirtualMemory.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the InternalAcpiGetTimerTick() function. The
function is called from "AcpiTimerLib.c", which is built into all three
library instances. The function is defined individually per library
instance, in "BaseRomAcpiTimerLib.c", "BaseAcpiTimerLib.c", and
"DxeAcpiTimerLib.c" (enumerated in increasing firmware phase order).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Based on the following patch from Brijesh Singh <brijesh.singh@amd.com>:
[PATCH v2 1/2] OvmfPkg/AmdSevDxe: Clear the C-bit from SMM Saved State
http://mid.mail-archive.com/20180228161415.28723-2-brijesh.singh@amd.comhttps://lists.01.org/pipermail/edk2-devel/2018-February/022016.html
Once PiSmmCpuDxeSmm relocates SMBASE for all VCPUs, the pages of the
initial SMRAM save state map can be re-encrypted (including zeroing them
out after setting the C-bit on them), and they can be released to DXE for
general use (undoing the allocation that we did in PlatformPei's
AmdSevInitialize() function).
The decryption of the same pages (which will occur chronologically
earlier) is implemented in the next patch; hence the "re-encryption" part
of this patch is currently a no-op. The series is structured like this in
order to be bisection-friendly. If the decryption patch preceded this
patch, then an info leak would be created while standing between the
patches.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
In the next three patches, we're going to modify three modules under
OvmfPkg. When OVMF is built with -D SMM_REQUIRE and runs in an SEV guest,
each affected module will have to know the page range that covers the
initial (pre-SMBASE relocation) SMRAM save state map. Add a helper
function to MemEncryptSevLib that calculates the "base address" and
"number of pages" constants for this page range.
(In a RELEASE build -- i.e., with assertions disabled and optimization
enabled --, the helper function can be compiled to store two constants
determined at compile time.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
In edk2, the "static" keyword is spelled "STATIC". Also let "STATIC" stand
alone on a line in function definitions.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Document the
"Cr3BaseAddress" parameter, and correct several parameter references.
Replace a "clear" reference to the C-bit with a "set" reference.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Document the
"Cr3BaseAddress" parameter, and correct several parameter references.
Replace a "set" reference to the C-bit with a "clear" reference.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Replace any
leftover "clear" references to the C-bit with "set" references. Also
remove any excess space in the comment block, and unindent the trailing
"**/" if necessary. Correct several parameter references.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Also remove
any excess space in the comment block, and unindent the trailing "**/" if
necessary. Correct several parameter references.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Also remove
any excess space in the comment block, and unindent the trailing "**/" if
necessary.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
There are many overlong lines; it's hard to work with the library like
this. Rewrap all files to 79 columns.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Gerd Hoffmann
Ard Biesheuvel
Liming Gao
Laszlo Ersek
Marc-André Lureau
Dandan Bi
Heyi Guo