Remove the GUID references to gArmGlobalVariableGuid and includes
of ArmGlobalVariableHob.h since they are not used by the fastboot
app.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18996 6f19259b-4bc3-4df7-8a09-765794883524
The EFIAPI function declaration is missing for several functions in the
EmbeddedPkg/Ebl directory. A few function pointer struct members expect
EFIAPI though and GCC46/X64 will fail to compile the directory without
them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18697 6f19259b-4bc3-4df7-8a09-765794883524
We are going to remove the ARMGCC toolchains, so replace any references
to it with its replacement GCC48.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18208 6f19259b-4bc3-4df7-8a09-765794883524
Spurious error might appear during network transaction,
ignore them when there are not relevant.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18028 6f19259b-4bc3-4df7-8a09-765794883524
Android FastBoot EFI application was using the Linux Loader
from BdsLib. This change makes use of the EFI Linux Loader
application.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17967 6f19259b-4bc3-4df7-8a09-765794883524
This new helper function allows to install ACPI Table on condition.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17540 6f19259b-4bc3-4df7-8a09-765794883524
If the device trees are not present when loading FdtPLatformDxe
driver then we should prevent to install the EFI Shell FDT commands.
The EFI Shell commands could be used later to install the missing
device tree.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17441 6f19259b-4bc3-4df7-8a09-765794883524
Note: This is the same SATA controller present on Juno R1.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17413 6f19259b-4bc3-4df7-8a09-765794883524
UEFI drivers should not depend on TimerLib. They should
use BS.Stall() instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17343 6f19259b-4bc3-4df7-8a09-765794883524
Since ASSERT()s are enabled even on all ArmPlatformPkg RELEASE
builds, ASSERT()ing on a valid FDT header will crash the firmware
if the user selects an incorrect file. Since ASSERT() is meant to
catch internal inconsistencies in the firmware, its use here is
inappropriate.
Instead, handle it as a normal error condition.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17309 6f19259b-4bc3-4df7-8a09-765794883524
The driver does not really require to be a DXE driver.
By moving it as a UEFI driver it also implies it is dispatcged after
the DXE drivers at boot time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17307 6f19259b-4bc3-4df7-8a09-765794883524
This command dumps the Flat Device Tree currently installed
in the EFI Configuration Table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17303 6f19259b-4bc3-4df7-8a09-765794883524
Display in the EFI Shell the device path from which
the FDT was retrieved when the installation process
triggered by the "-i" option is successful.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17301 6f19259b-4bc3-4df7-8a09-765794883524
Add deletion of the "Fdt" UEFI variable used to specify
a development FDT device path when the 'setfdt' command
is called with an empty string as file path.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17300 6f19259b-4bc3-4df7-8a09-765794883524
Add the display of the device paths that the FDT installation
process goes through when the 'setfdt' EFI Shell command is
called without any parameter.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17299 6f19259b-4bc3-4df7-8a09-765794883524
The current mechanism relies on EndOfDxe event that runs at TPL_CALLBACK level.
It prevents some protocols to run as excepted because they require TPL_CALLBACK
(eg: TFTP transfer).
This change moves FDT installation in the driver entrypoint (that is called at
TPL_APPLICATION level).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17298 6f19259b-4bc3-4df7-8a09-765794883524
LzmaDecompress support is moving from IntelFrameworkPkg to
MdeModulePkg.
This change ensures ArmPlatformPkg reflects this future change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <ronald.cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17133 6f19259b-4bc3-4df7-8a09-765794883524
The Lan9118 driver did not recover after a receiver error as the error
handling code stopped the transmitter but did not restart it. Added the
restart of the transmitter.
Added also the restart of the receiver after a transmitter error and
the reactivation of the LEDs after all resets.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17106 6f19259b-4bc3-4df7-8a09-765794883524
Instead of using a dynamic PCD, store the device tree address in a HOB
so that we can also run under a configuration that does not support
dynamic PCDs.
This also adds MemoryAllocationLib to the [LibraryClasses] section of
ArmVirtualizationPlatformLib/ArmVirtualizationPlatformLib.inf, as this
dependency was formerly satisfied transitively through one of the
library dependencies that were dropped.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16959 6f19259b-4bc3-4df7-8a09-765794883524
Remove the option to update the "Fdt" UEFI variable in the ARM BDS as
the "setfdt" EFI Shell command provides this service from now.
Remove the use of this variable in the legacy kernel boot loader and
use the FDT installed in the configuration table instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16940 6f19259b-4bc3-4df7-8a09-765794883524
The 'setfdt' EFI Shell command allows to define a new FDT
as the prefered one for development purposes. It allows to
trigger the run of the FDT installation process as well.
Please refer to the README.txt file for more comprehensive
description.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16934 6f19259b-4bc3-4df7-8a09-765794883524
The FdtPlatformDxe driver installs the FDT of the platform it
is running on into the UEFI Configuration table at the end of
the DXE phase.
Please refer to the README.txt file for a global overview of
the driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16933 6f19259b-4bc3-4df7-8a09-765794883524
Use the example.com domain as recommended in RFC 2606.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Bruce Cran <bruce.cran@gmail.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16724 6f19259b-4bc3-4df7-8a09-765794883524
AcpiLib is a library to help working with ACPI Tables.
In this initial implementation, the library provides:
- a helper function to locate and install the ACPI Tables within
a Firmware Volume
- Some helper macros to initialize some ACPI structures
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16650 6f19259b-4bc3-4df7-8a09-765794883524
The UEFI specification does not require the initialisation and reset
interface to check if an Ethernet cable is connected or not, and provides
the GetStatus() interface to do this. Furthermore, the 'Managed Network
Protocol' take care of the cable connection check in edk2 network stack.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16326 6f19259b-4bc3-4df7-8a09-765794883524
Update to show what the patch looks like in email form.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16297 6f19259b-4bc3-4df7-8a09-765794883524
Rework the PL011UartGetControl() function removing a TODO by the way.
Update of the header comment blocks of (PL011Uart|SerialPort)GetControl() functions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16252 6f19259b-4bc3-4df7-8a09-765794883524
Rework of PL011UartSetControl() as a consequence as well as update of
function header comment blocks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16251 6f19259b-4bc3-4df7-8a09-765794883524
MdePkg/Library/BaseSerialPortLibNull can be used instead as a template.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16245 6f19259b-4bc3-4df7-8a09-765794883524
Correct the setting of the hardware filters according to what it asked
to the driver through the ReceiveFilters() interface function.
Keep track of the hardware settings in the "ReceiveFilterSetting" field of
the EFI_SIMPLE_NETWORK_MODE structure.
From now, after initialization, all filters are disabled and thus no packet
received.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16243 6f19259b-4bc3-4df7-8a09-765794883524
Add or fix checking of the input parameters of the functions that constitute
the EFI_SIMPLE_NETWORK_PROTOCOL interface provided by the LAN9118 driver.
In case of invalid calls, the returned error codes are now compliant with the
UEFI specificationi and the SCT tests checking for those error codes do not
fail anymore.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16239 6f19259b-4bc3-4df7-8a09-765794883524
TxBuff argument is optional in SNP.GetStatus(). This argument can be NULL.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16236 6f19259b-4bc3-4df7-8a09-765794883524
Split off the recently added functionality to load device tree images and
install them as configuration tables, as it introduces a dependency on
UefiBootServicesTableLib, preventing FdtLib from being used during SEC and
PEI phases.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16080 6f19259b-4bc3-4df7-8a09-765794883524
Added the header comment block to the function "RtcTimeFieldsValid()" and
reworked the alignment of the code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16011 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Star Zeng
Thomas Palmer
Ronald Cron
Olivier Martin
Jordan Justen