For avoid the compiler optimizing the code, we let Parameter and Procedure in CpuData volatile.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17024 6f19259b-4bc3-4df7-8a09-765794883524
Add a new sleeping state for APs, when no procedure execution, put AP to sleep. when need to execute
procedure, only need to wake up this AP by sent SIPI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17023 6f19259b-4bc3-4df7-8a09-765794883524
Use the example.com domain as recommended in RFC 2606.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Bruce Cran <bruce.cran@gmail.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16724 6f19259b-4bc3-4df7-8a09-765794883524
Make code consistence between ASM and S files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16530 6f19259b-4bc3-4df7-8a09-765794883524
when gBS->ExitBootServices() is called, the APs should avoid to access
the unsafed buff datas which were allocated by boot services.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16397 6f19259b-4bc3-4df7-8a09-765794883524
This sequence should happen:
* CpuMp.c: Allocate a stack for the APs
* ApStartup.c: Send Start IPI to wake APs in 16-bit real mode
* MpAsm.S: AP enters CpuDxe driver code without stack
- AP grabs a lock
- AP sets up stack
- AP calls CpuMp.c:ApEntryPointInC
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16370 6f19259b-4bc3-4df7-8a09-765794883524
If timeout expires before AP returns from Procedure, the AP should
be terminated, we introduce ResetApStackLess() to send init IPI
to let AP exit Procedurce and re-available.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16366 6f19259b-4bc3-4df7-8a09-765794883524
Due to the implementation of AcquireSpinLock() is not MP safe,
so we should use AcquireSpinLockOrFail directly instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16357 6f19259b-4bc3-4df7-8a09-765794883524
All APs use the same common stack to initialization. after
initialization, APs should switch to the stack of its own.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16351 6f19259b-4bc3-4df7-8a09-765794883524
introduce PCD value: PcdCpuMaxLogicalProcessorNumber and PcdCpuApStackSize,
used for initialize APs stacks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16350 6f19259b-4bc3-4df7-8a09-765794883524
This routine starts the APs and directs them to run the specified
code.
The specified code is entered without a stack being available.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16349 6f19259b-4bc3-4df7-8a09-765794883524
We'll want to use the structures for AP startup.
Note: It seems previously we were not using '#pragma pack ()' in
CpuGdt.c.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16348 6f19259b-4bc3-4df7-8a09-765794883524
The AP startup code simply jumps into this code with the CpuDxe driver
without setting up a stack for the processor.
Therefore, this code must setup the stack before calling into C code.
This is the basic flow:
* AP enters CpuDxe driver code (AsmApEntryPoint) without stack
- AP grabs a lock
- AP sets up stack
- AP calls CpuMp.c:ApEntryPointInC
- If ApEntryPointInC returns, the lock is freed, and another AP may
run
- The AP C code may call AsmApDoneWithCommonStack to indicate that
the AP is no longer using the stack, and another may therefore
proceed to use the stack and then call ApEntryPointInC
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16347 6f19259b-4bc3-4df7-8a09-765794883524
This is the function the AP assembly code will expect to call after
getting a lock and setting up the stack.
Only one AP will enter this routine at a time.
If ApEntryPointInC exits, then the assembly code will loop around to
grab the lock, setup the stack, and call ApEntryPointInC again.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16346 6f19259b-4bc3-4df7-8a09-765794883524
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16345 6f19259b-4bc3-4df7-8a09-765794883524
Update to show what the patch looks like in email form.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16297 6f19259b-4bc3-4df7-8a09-765794883524
.S assembler files must be AT&T syntax ones. So Intel syntax mnemonic is not good. Discovered by clang integrated assembler.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nikolai Saoukh <nms@otdel-1.org>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16100 6f19259b-4bc3-4df7-8a09-765794883524
.S assembler files must be AT&T syntax ones. So Intel syntax mnemonic is not good. Discovered by clang integrated assembler.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nikolai Saoukh <nms@otdel-1.org>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16098 6f19259b-4bc3-4df7-8a09-765794883524
CpuExceptionHandlerLib has code that contains absolute relocations, not supported by
Xcode for X64, and it then copies this code to an alternate location in memory. It is
very hard to write IP relative self-modifiying code. I had to update AsmVectorNumFixup()
to also patch in the absolute addressess after the code was copied.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anderw Fish <afish@apple.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16068 6f19259b-4bc3-4df7-8a09-765794883524
Module UNI and Package UNI files are not DOS format. Convert them to DOS format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16047 6f19259b-4bc3-4df7-8a09-765794883524
5. Add PACKAGE_UNI_FILE UNI file that contains the localized Abstract and Description of a package and localized strings associated with PCDs.
a. Addresses an information gap between DEC files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume PACKAGE_UNI_FILE and associated UNI file during UDP creation that performs the DEC -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce PACKAGE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> DEC conversion.
6. Add Package Extra UNI file that provides the localized Name of a package.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a package to specify extra files to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a package to go along with the localized Abstract and Description from the PACKAGE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15936 6f19259b-4bc3-4df7-8a09-765794883524
4. PCD information in DEC file comment blocks are either incomplete or incorrect.
This includes detailed description, @Prompt, @ValidRange, @ValidList, @Expression, and [Error.<TokenSpaceGuid>] validation error messages.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15935 6f19259b-4bc3-4df7-8a09-765794883524
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.
3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15934 6f19259b-4bc3-4df7-8a09-765794883524
1. Usage information in INF file comment blocks are either incomplete or incorrect.
This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes.
The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15933 6f19259b-4bc3-4df7-8a09-765794883524
We strongly prefer that contribtions be offered using the same license
as the project/module. But, we should document other acceptable
licenses for contributions.
This will allow package owners to more easily know if they can accept
a contribution under a different source license.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Mark Doran <mark.doran@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15892 6f19259b-4bc3-4df7-8a09-765794883524
This implements the older VTF ResetVector code often used on EDK II
IA32 & X64 platforms.
This VTF requires build time fixups in order to find the SEC entry
point. The BaseTools GenFv tool has code that patches the jump target
of the reset vector code to match the entry point of the SEC image in
the PEI Firmware Volume.
v2:
* Rename from OldVtf to FixupVtf
* Use EDK II extension of .nasmb rather than .nasmbin
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15826 6f19259b-4bc3-4df7-8a09-765794883524