Add library classes which are required by StdLib, but not commonly defined in Platform DSC files, to StdLib.inc.
Modify MB_LEN_MAX to be 4, the maximum length of UTF-8 characters.
Adjust size of internal buffers to be multiples of MB_LEN_MAX instead of assuming 1-byte characters.
Make the XYoffset object public and move its declaration into EfiSysCall.h.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: daryl.mcdaniel@intel.com
Reviewed-by: erik.c.bjorge@intel.com
Reviewed-by: lee.g.rosenbaum@intel.com
Reviewed-by: leroy.p.leahy@intel.com
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13457 6f19259b-4bc3-4df7-8a09-765794883524
1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old.
New HOST software will implement logic to handle all other revision mismatch cases.
2. Define new debug message packet to print the debug agent trace information by debug port channel.
3. Add check sum mechanism in the communication protocol between TARGET/HOST.
4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command.
5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach.
6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library.
7. Enable CPUID feature.
8. Enable the hardware data breakpoint.
9. add handshake to improve usb debug cable identify stability issue.
10.Refine all the communication protocol packet to improve extensibility and debugging performance.
a. Use 64bit for IO port address.
b. Add additional Width field to READ_MEMORY/WRITE_MEMORY.
c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach.
d. Remove READ_GROUP register.
e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers).
11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag.
12.Fix IO break point does not work issue in PEI phase.
13.Avoid BSP/APs collision when they met break point at the same time.
14.Solve a bug of calculating debug handle in sec phase.
15.Use mailbox content at Dxe phase but not clear it and reinitialize again.
16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg.
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
Testing:
Using two network adapters, second one always connected to the network.
1. Eth0 not configured, not connected - short delay
2. Eth0 not configured, connected - short delay
3. Eth0 configured, not connected - short delay
4. Eth0 configured, connected to private network - long delay due to connection timeout, failover to Eth1
5. Eth1 configured, connected, no server - long delay due to connection timeout, returned timeout error.
Signed-off-by: lpleahy
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13436 6f19259b-4bc3-4df7-8a09-765794883524
This Dummy CompilerStubLib avoids to add the ARM CompilerIntrinsicsLib in
every EDK module INF files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ruiyu NI <ruiyu.ni@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13434 6f19259b-4bc3-4df7-8a09-765794883524
Service.c - Return EFI_SUCCESS if any of the protocols are present. Return failure only when no protocols are available or no more memory available.
Signed-off-by: lpleahy
Reviewed-by: vzimmer
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13426 6f19259b-4bc3-4df7-8a09-765794883524
KVM can substantially boost the speed of the rep insb/insw/insl
and rep outsb/outsw/outsl instructions by transferring up to
a page of data per VM trap.
This change adds assembly handling of the PCI Host Bridge
I/O FIFO Reads and Writes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13424 6f19259b-4bc3-4df7-8a09-765794883524
Update MADT processing for QEMU to add additional Local APIC
entries to the MADT.
The MADT is still built with a single Local APIC entry.
If the AcpiPlatformDxe driver determines that more processors
are available, then additional Local APIC entries are added
to the MADT at runtime.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13387 6f19259b-4bc3-4df7-8a09-765794883524
Detect QEMU & Xen, and allow each to choose how to publish
the individual ACPI tables.
Currently both paths simply publish the tables unmodified.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13385 6f19259b-4bc3-4df7-8a09-765794883524
This driver is currently a direct copy of
MdeModulePkg/Universal/Acpi/AcpiPlatformDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13384 6f19259b-4bc3-4df7-8a09-765794883524
darylm503
lzeng14
erictian
lpleahy
oliviermartin
vanjeff
jcarsey
jyao1
ydong10
lgao4
sfu5
niruiyu
jljusten
gdong1
tye1
rsun3