After commit 91cc526b15 "MdeModulePkg/SerialDxe: Fix not able to change
serial attributes", serial is initialized using the reset method that
will call SetAttributes.
However, SetAttributes may return EFI_INVALID_PARAMETER when a driver
does not support some parameters. This will be propagated by the reset
function and lead to UEFI failing to get the console setup.
For instance, this is the case when using the Xen console driver.
Fix it by introspecting the result and return EFI_SUCCESS when the
SetAttributes report an invalid parameter (i.e EFI_INVALID_PARAMETER).
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
SerialSetAttributes is meant to match the behavior of the function
EFI_SERIAL_IO_PROTOCOL.SetAttributes() in the UEFI spec (v2.7). This
means the function can only return:
- EFI_SUCCESS
- EFI_INVALID_PARAMETER
- EFI_DEVICE_ERROR
However the function SerialPortSetAttributes may also validly return
EFI_UNSUPPORTED. For instance this is the case of the Xen Console
driver.
EFI_UNSUPPORTED could be also interpreted as "One or more of the attributes
has an unsupported value". So return EFI_INVALID_PARAMETER in that case.
Lastly, to prevent another return slipping in the future, all the errors
but EFI_INVALID_PARAMETER and EFI_UNSUPPORTED will return
EFI_DEVICE_ERROR.
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Per the UEFIv2.7 spec, EFI_DEVICE_ERROR is returned when the serial
device is not functioning correctly. Update the description to avoid
confusion.
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
DXE performance gauge record access functions might be reentered since
we are supporting something like USB hot-plug, which is a timer event
where gBS->ConnectController might be called and then PERF will be
called in CoreConnectSingleController.
When StartGaugeEx is being reentered, not only the gauge record might
be overwritten, more serious situation will be caused if gauge data
buffer reallocation procedure is interrupted, between line 180 and 187
in DxeCorePerformanceLib.c specifically. There, mMaxGaugeRecords will
be doubled twice (denoted as 4X), but mGaugeData only points to a
buffer of size 2X, which will probably cause the following 2X memory
to be overflowed when gauge records are increased.
So we add EFI lock with TPL_NOTIFY in StartGaugeEx/EndGaugeEx/GetGaugeEx
to avoid memory overflow and gauge data corruption.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add Ruiyu as MdeModulePkg reviewer,
especially for some Domains.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This way depends on VS vswhere.exe to find VS2017 installed directory.
vswhere.exe starts in Visual Studio 2017 version 15.2.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
UPD allocation and patching can be done outside FspWrapper
as implementation choice so adding a PCD to select between
original FspWrapper allocation model or outside model
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The TFTP command was converted from a NULL class library instance
to a dynamic shell command in commit 0961002352.
This patch complements commit f9bc2f8763, which only removed the
old library, but didn't add the new dynamic command。
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Original code breaks a single assembly code to multiple lines.
But, when VS CL.exe preprocesses the FixedPcdGet32() macro
invocation to the replacement text, it loses '\', and causes
NASM to fail.
Changing the multiple lines to one line to resolve the build failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
When dynamic command drivers are built into FV and start during
boot, they fails. Because Shell protocol doesn't exist during boot.
The patch sets Shell protocol and also set PcdShellLibAutoInitialize
to FALSE to ensure that
1. Shell protocol check doesn't happen in driver's entry point.
2. Driver can get the Shell protocol in DynamicCommand.Handler().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The previous change in ShellLib: "commit
3d29f8c5e3
* ShellPkg/ShellLib: Constructor doesn't depend on ShellParameters"
resolved the issue when loading dynamic command driver from Shell
environment.
But when dynamic command driver is built into FV and started during
boot, the driver still fails to start because Shell protocol doesn't
exist at that time.
The patch changes ShellLib to:
1. Do not look for Shell and ShellParameters protocol when they are
non-NULL in ShellLibConstructorWorker();
The two protocols are assumed to be set by DynamicCommand.Handler.
When ShellInitialize() is called in DynamicCommand.Handler, this
change can prevent the two protocols to be changed to NULL by
the locating logic.
2. Do not reset the Shell and ShellParameters protocol to NULL in
ShellLibDestructor() when CloseProtocol() fails;
Dynamic command driver needs to set the PcdShellLibAutoInitialize
to FALSE in order to skip the constructor.
Current logic calls ShellLibDestructor() when the PCD is FALSE when
ShellInitialize() is called. The change prevent the two protocols
to be changed to NULL.
The two changes don't impact existing usage case so they are backward
compatible.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Current implementation resets the CTRL-C event early when printing
the shell prompt, when user types "<CTRL-C>ls<ENTER>", "ls" command
is terminated immediately when starts.
It's not an expected behavior from users' perspective.
Correct way is to reset the CTRL-C event just before running the
command, which is a bit later than current point.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch caused Windows 10 S4 resume failure.
Considering the similar changes are reverted from PciBus driver,
revert the patch from AtaAtapiPassThru as well.
Revert "MdeModulePkg/AtaAtapiPassThru: disable the device
at ExitBootServices()"
This reverts commit 6fb8ddd36b.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch caused Windows 10 S4 resume failure.
Considering the similar changes are reverted from PciBus driver,
revert the patch from AtaAtapiPassThru as well.
Revert "MdeModulePkg/AtaAtapiPassThru: disable only BM-DMA at
ExitBootServices()"
This reverts commit 76fd5a660d.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This means that SetBootOrderFromQemu() will preserve all UEFI boot options
matched by any given OFW devpath, such as PXEv4, HTTPv4, PXEv6 and HTTPv6
boot options for the same NIC. Currently we stop the matching / appending
for the OFW devpath coming from the outer loop whenever we find the first
UEFI boot option match in the inner loop.
(The previous patch was about multiple OFW devpaths matching a single UEFI
boot option (which should never happen). This patch is about a single OFW
devpath matching multiple UEFI boot options. With the "break" statement
removed here, the small optimization from the last patch becomes a bit
more relevant, because now the inner loop always counts up to
ActiveCount.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The SetBootOrderFromQemu() function implements a nested loop where
- the outer loop iterates over all OpenFirmware (OFW) device paths in the
QEMU boot order, and translates each to a UEFI device path prefix;
- the inner loop matches the current (translated) prefix against all
active UEFI boot options in turn;
- if the UEFI boot option is matched by the translated prefix, the UEFI
boot option is appended to the "new" UEFI boot order, and marked as
"has been appended".
This patch adds a micro-optimization where already matched / appended UEFI
boot options are skipped in the inner loop. This is not a functional
change. A functional change would be if, as a consequence of the patch,
some UEFI boot options would no longer be *doubly* matched.
For a UEFI boot option to be matched by two translated prefixes, one of
those prefixes would have to be a (proper, or equal) prefix of the other
prefix. The PCI and MMIO OFW translation routines output such only in the
following cases:
- When the original OFW device paths are prefixes of each other. This is
not possible from the QEMU side. (Only leaf devices are bootable.)
- When the translation rules in the routines are incomplete, and don't
look at the OFW device paths for sufficient length (i.e., at nodes where
they would already differ, and the difference would show up in the
translation output).
This would be a shortcoming of the translation routines and should be
fixed in TranslatePciOfwNodes() and TranslateMmioOfwNodes(), whenever
identified.
Even in the second case, this patch would replace the double appending of
a single UEFI boot option (matched by two different OFW device paths) with
a correct, or cross-, matching of two different UEFI boot options. Again,
this is not expected, but arguably it would be more correct than duplicate
boot option appending, should it occur due to any (unexpected, unknown)
lack of detail in the translation routines.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
UEFI Shell spec defines Shell Dynamic Command protocol which is just
for the purpose to extend internal command.
So dp command is changed from NULL class library to be a driver
producing DynamicCommand protocol.
The guideline is:
1. Only use NULL class library for Shell spec defined commands.
2. New commands can be provided as not only a standalone application
but also a dynamic command. So it can be used either as an
internal command, but also as a standalone application.
DpApp.inf is to provide a standalone application.
DpDynamicCommand.inf is to provide a standalone driver producing
Dynamic Command protocol.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
UEFI Shell spec defines Shell Dynamic Command protocol which is just
for the purpose to extend internal command.
So tftp command is changed from NULL class library to be a driver
producing DynamicCommand protocol.
The guideline is:
1. Only use NULL class library for Shell spec defined commands.
2. New commands can be provided as not only a standalone application
but also a dynamic command. So it can be used either as an
internal command, but also as a standalone application.
TftpApp.inf is to provide a standalone application.
TftpDynamicCommand.inf is to provide a standalone driver producing
Dynamic Command protocol.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
When ShellLib is linked to a driver producing DynamicCommand
protocol, ShellParameters protocol is set by
DynamicCommand.Handler().
The driver image handle doesn't have ShellParameters protocol
installed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Once the paging capabilities were filtered out, there might be some adjacent entries
sharing the same capabilities. It's recommended to merge those entries for the OS
compatibility purpose.
This patch makes use of existing method MergeMemoryMap() to do it. This is done by
simply turning this method from static to extern, and call it after filter code.
This patch is related to an issue described at
https://bugzilla.tianocore.org/show_bug.cgi?id=753
This patch is also passed test of booting follow OSs:
Windows 10
Windows Server 2016
Fedora 26
Fedora 25
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The PrePi code we inherited from ArmPlatformPkg contains a rather
obscure optimization, where entry points of the PE/COFF and LZMA
handling routines are recorded in special HOBs, allowing DXE core
to call into that code directly rather than carry its own copy of
these libraries.
Given that no ArmVirtPkg platforms actually include the library
resolutions* that take advantage of these optimizations, let's not
bother with them, and remove the associated code.
* EmbeddedPkg/Library/LzmaHobCustomDecompressLib/LzmaHobCustomDecompressLib.inf
EmbeddedPkg/Library/DxeHobPeCoffLib/DxeHobPeCoffLib.inf
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Under the following scenario:
- no UEFI bootable application available anywhere in the system,
- ... not even for the default platform recovery option,
- no shell is built into the firmware image,
- but UiApp is available in the firmware image,
we should preferably not just hang in BdsEntry() with:
DEBUG ((EFI_D_ERROR, "[Bds] Unable to boot!\n"));
CpuDeadLoop ();
while the user sits at the TianoCore logo page, wondering what's going on.
Print an informative message to the console, wait for a keypress, and then
return to the Boot Manager Menu forever.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=513
Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Replace "(UINT8 *)NewVariableData" with (UINT8 *)NewVariableData + Offset"
to avoid the header of EFI_SIGNATURE_LIST being copied to the front of
NewVariableData every time and update ListWalker when handling the current
EFI_SIGNATURE_LIST finishes.
Cc: Zhang Chao <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: chenc2 <chen.a.chen@intel.com>
Reviewed-by: Zhang Chao <chao.b.zhang@intel.com>
With the last user FdtPlatformDxe removed, we can finally get rid of the
last bit of ARM BDS related cruft.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
With the last users migrated to a private version, we can now remove
FdtPlatformDxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
EBL is a deprecated, small memory footprint alternative for the
UEFI Shell that is no longer in use by any platforms in EDK2 or
in edk2-platforms. To avoid confusion, let's remove it from the
tree.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
EBL is being phased out so remove ArmPlatformPkg's copy of EblCmdLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This library is not used anywhere so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Remove ArmJunoPkg now that it has been moved into edk2-platforms
where it belongs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This implementation of ArmPlatformSecExtraActionLib is no longer used
anywhere so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This library class is not used by any drivers, so remove it in its
entirety.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This module is not used anywhere under edk2 or edk2-platforms, so let's
remove it. This removes the only dependency on ArmPlatformLib from ArmPkg.
While at it, remove a mention of ArmPlatformPkg from a comment in the
.dec file as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The only user of ArmPlatformLib's ArmGetCpuCountPerCluster () is itself
an ArmPlatformLib implementation, i.e., ArmVExpressLibRTSM.
Given that we'd prefer to get rid of ArmPlatformLib entirely, let's
remove ArmGetCpuCountPerCluster () from the API as a first step.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The sum use these applications made of BdsLib was one invocation of the
IS_DEVICE_PATH_NODE macro, and (incorrectly) being able to leave out a
dependency on gEfiLoadedImageProtocolGuid.
So expand the macro in place and add the missing dependency.
Then clean up the .dsc, .inf and #includes accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Gcc issued the warning when compiling CryptoPkg:
CryptoPkg/Library/Include/CrtLibSupport.h:135:17: warning: type of 'memset' does not match original declaration [-Wlto-type-mismatch]
void *memset (void *, int, size_t);
^
CryptoPkg/Library/IntrinsicLib/MemoryIntrinsics.c:27:8: note: type mismatch in parameter 2
void * memset (void *dest, char ch, size_t count)
^
This commit changes the type of ch from char to int to match the
declaration.
Cc: Qin Long <qin.long@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Some OSs will treat EFI_MEMORY_DESCRIPTOR.Attribute as really
set attributes and change memory paging attribute accordingly.
But current EFI_MEMORY_DESCRIPTOR.Attribute is assigned by
value from Capabilities in GCD memory map. This might cause
boot problems. Clearing all paging related capabilities can
workaround it. The code added in this patch is supposed to
be removed once the usage of EFI_MEMORY_DESCRIPTOR.Attribute
is clarified in UEFI spec and adopted by both EDK-II Core and
all supported OSs.
Laszlo did a thorough test on OVMF emulated platform. The details
can be found at
https://bugzilla.tianocore.org/show_bug.cgi?id=753#c10
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
More than one entry of RT_CODE memory might cause boot problem for some
old OSs. This patch will fix this issue to keep OS compatibility as much
as possible.
More detailed information, please refer to
https://bugzilla.tianocore.org/show_bug.cgi?id=753
Laszlo did a thorough test on OVMF emulated platform. The details can be found
at
https://bugzilla.tianocore.org/show_bug.cgi?id=753#c10
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
V2:
* Correct the commit log.
Currently, the return code of OPENSSL_init_ssl(0 or 1) and RandomSeed
(TRUE or FALSE) are not checked in TlsInitialize(). Also "VOID" is used
as the return type of TlsInitialize(), which can't be used to capture
the returned value for error handling.
From Long Qin (CryptoPkg owner):
The early version of OPENSSL_init_ssl() use the "VOID" as the return
value, which was updated to "int" later because the function changes
can fail.
So, this patch is to change the return type of TlsInitialize() to
follow up the OPENSSL_init_ssl() update.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Long Qin <qin.long@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Julien Grall
Heyi Guo
Star Zeng
Liming Gao
Dandan Bi
Chasel, Chiu
Ruiyu Ni
Laszlo Ersek
Jian J Wang
Ard Biesheuvel
chenc2
Leif Lindholm
Gary Lin
Jiaxin Wu