The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Document the
"Cr3BaseAddress" parameter, and correct several parameter references.
Replace a "clear" reference to the C-bit with a "set" reference.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Document the
"Cr3BaseAddress" parameter, and correct several parameter references.
Replace a "set" reference to the C-bit with a "clear" reference.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Replace any
leftover "clear" references to the C-bit with "set" references. Also
remove any excess space in the comment block, and unindent the trailing
"**/" if necessary. Correct several parameter references.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Also remove
any excess space in the comment block, and unindent the trailing "**/" if
necessary. Correct several parameter references.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Also remove
any excess space in the comment block, and unindent the trailing "**/" if
necessary.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
There are many overlong lines; it's hard to work with the library like
this. Rewrap all files to 79 columns.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Because terminal doesn't support shift and toggle key state,
ReadKeyStrokeEx just sets the two states to 0.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
gcc-8 (which is part of Fedora 28) enables the new warning
"-Wstringop-overflow" in "-Wall". This warning is documented in detail at
<https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html>; the
introduction says
> Warn for calls to string manipulation functions such as memcpy and
> strcpy that are determined to overflow the destination buffer.
It breaks the BaseTools build with:
> GenVtf.c: In function 'ConvertVersionInfo':
> GenVtf.c:132:7: error: 'strncpy' specified bound depends on the length
> of the source argument [-Werror=stringop-overflow=]
> strncpy (TemStr + 4 - Length, Str, Length);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> GenVtf.c:130:14: note: length computed here
> Length = strlen(Str);
> ^~~~~~~~~~~
It is a false positive because, while the bound equals the length of the
source argument, the destination pointer is moved back towards the
beginning of the destination buffer by the same amount (and this amount is
range-checked first, so we can't precede the start of the dest buffer).
Replace both strncpy() calls with memcpy().
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reported-by: Cole Robinson <crobinso@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
gcc-8 (which is part of Fedora 28) enables the new warning
"-Wrestrict" in "-Wall". This warning is documented in detail
at <https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html>; the
introduction says
> Warn when an object referenced by a restrict-qualified parameter (or, in
> C++, a __restrict-qualified parameter) is aliased by another argument,
> or when copies between such objects overlap.
It breaks the BaseTools build (in the Brotli compression library) with:
> In function 'ProcessCommandsInternal',
> inlined from 'ProcessCommands' at dec/decode.c:1828:10:
> dec/decode.c:1781:9: error: 'memcpy' accessing between 17 and 2147483631
> bytes at offsets 16 and 16 overlaps between 17 and 2147483631 bytes at
> offset 16 [-Werror=restrict]
> memcpy(copy_dst + 16, copy_src + 16, (size_t)(i - 16));
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> In function 'ProcessCommandsInternal',
> inlined from 'SafeProcessCommands' at dec/decode.c:1833:10:
> dec/decode.c:1781:9: error: 'memcpy' accessing between 17 and 2147483631
> bytes at offsets 16 and 16 overlaps between 17 and 2147483631 bytes at
> offset 16 [-Werror=restrict]
> memcpy(copy_dst + 16, copy_src + 16, (size_t)(i - 16));
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Paolo Bonzini <pbonzini@redhat.com> analyzed the Brotli source in detail,
and concluded that the warning is a false positive:
> This seems safe to me, because it's preceded by:
>
> uint8_t* copy_dst = &s->ringbuffer[pos];
> uint8_t* copy_src = &s->ringbuffer[src_start];
> int dst_end = pos + i;
> int src_end = src_start + i;
> if (src_end > pos && dst_end > src_start) {
> /* Regions intersect. */
> goto CommandPostWrapCopy;
> }
>
> If [src_start, src_start + i) and [pos, pos + i) don't intersect, then
> neither do [src_start + 16, src_start + i) and [pos + 16, pos + i).
>
> The if seems okay:
>
> (src_start + i > pos && pos + i > src_start)
>
> which can be rewritten to:
>
> (pos < src_start + i && src_start < pos + i)
>
> Then the numbers are in one of these two orders:
>
> pos <= src_start < pos + i <= src_start + i
> src_start <= pos < src_start + i <= pos + i
>
> These two would be allowed by the "if", but they can only happen if pos
> == src_start so they degenerate to the same two orders above:
>
> pos <= src_start < src_start + i <= pos + i
> src_start <= pos < pos + i <= src_start + i
>
> So it is a false positive in GCC.
Disable the warning for now.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reported-by: Cole Robinson <crobinso@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
gcc-8 (which is part of Fedora 28) enables the new warning
"-Wstringop-truncation" in "-Wall". This warning is documented in detail
at <https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html>; the
introduction says
> Warn for calls to bounded string manipulation functions such as strncat,
> strncpy, and stpncpy that may either truncate the copied string or leave
> the destination unchanged.
It breaks the BaseTools build with:
> EfiUtilityMsgs.c: In function 'PrintMessage':
> EfiUtilityMsgs.c:484:9: error: 'strncat' output may be truncated copying
> between 0 and 511 bytes from a string of length 511
> [-Werror=stringop-truncation]
> strncat (Line, Line2, MAX_LINE_LEN - strlen (Line) - 1);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> EfiUtilityMsgs.c:469:9: error: 'strncat' output may be truncated copying
> between 0 and 511 bytes from a string of length 511
> [-Werror=stringop-truncation]
> strncat (Line, Line2, MAX_LINE_LEN - strlen (Line) - 1);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> EfiUtilityMsgs.c:511:5: error: 'strncat' output may be truncated copying
> between 0 and 511 bytes from a string of length 511
> [-Werror=stringop-truncation]
> strncat (Line, Line2, MAX_LINE_LEN - strlen (Line) - 1);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The right way to fix the warning would be to implement string concat with
snprintf(). However, Microsoft does not appear to support snprintf()
before VS2015
<https://stackoverflow.com/questions/2915672/snprintf-and-visual-studio-2010>,
so we just have to shut up the warning. The strncat() calls flagged above
are valid BTW.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current BLOCK IO API code is using TPL_CALLBACK,
but comment is saying TPL_NOTIFY.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Within function UpdateDisplayFromHistory():
When getting a character with different attribute with the current one,
the statement to compare the character with a 'NULL' char should be:
*StringSegmentEnd != CHAR_NULL
rather than:
StringSegmentEnd != CHAR_NULL
This commit resolves this typo.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
When a USB device reports failure for a CMD and REQUEST SENSE returns
Media Changed key, UsbBootExecCmdWithRetry() stops to retry CMD and
returns EFI_MEDIA_CHANGED to caller.
For this case, the CMD should be retried until success, getting
NoMedia sense key or timeout.
The patch updates UsbBootExecCmdWithRetry() to follow the above
rule so EFI_MEDIA_CHANGED is no longer returned.
UsbBootDetectMedia() is updated accordingly.
Because UsbBootGetParams() is called for new plugged USB storage,
and some USB storage devices may report Media Changed key,
UsbBootGetParams() is updated to treat it as a Success.
This change could fix the issue that some USB storage devices
cannot be detected.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This reverts commit a662afb5b0.
* MdeModulePkg/UsbStorage: Fix "map -r" cannot detect media change
The above commit fixed the following issue:
When system boots to Shell without CDROM inside USB CDROM drive,
and then user inserts the CDROM with Eltorito file system,
"map -r" cannot show the new ELtorito file system.
The commit caused EFI_MEDIA_CHANGED status returned from
UsbBootDetectMedia().
But that fix exposes another issue:
When issuing ReadCapacity command to certain USB key
(Kingston DataTraveler G3 8GB) after it's hot-plugged, USB device
returns STALL error and RequestSense command returns media changed
sense data. (Most of the USB keys return SUCCESS for ReadCapacity
command after hot-plug.)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This reverts commit 6461344c31.
* MdeModulePkg/UsbMass: Fix hot-plug USB CDROM can't be recognized
UsbBootExecCmd() only calls UsbBootRequestSense() to get sense key
when CMD fails.
When POWER ON (29h) ASC returns from REQUEST SENSE, implementation
should retry the CMD, instead of treating this as a SUCCESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Per UEFI spec, FibreEx.WWN, FibreEx.Lun, SasEx.Address, SasEx.Lun
and iSCSI.Lun are all 8-byte array with byte #0 in the left.
It means "0102030405060708" should be converted to:
UINT8[8] = {01, 02, 03, 04, 05, 06, 07, 08}
or UINT64 = {0807060504030201}
Today's implementation wrongly uses the reversed order.
The patch fixes this issue by using StrHexToBytes().
Copy this solution from MdePkg Hash version d0196be.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If protocol string is not specified, default TCP(0) should be used.
Today's implementation wrongly sets to 1 for this case.
Copy the fix solution from MdePkg Hash version e6c80aea.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Per UEFI spec, iSCSI.Lun is a 8-byte array with byte #0 in the left.
It means "0102030405060708" should be converted to:
UINT8[8] = {01, 02, 03, 04, 05, 06, 07, 08}
or UINT64 = {0807060504030201}
Today's implementation wrongly uses the reversed order.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jie Lin <jie.lin@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
If protocol string is not specified, default TCP(0) should be used.
Today's implementation wrongly sets to 1 for this case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add gEdkiiS3SmmInitDoneGuid, after S3 SMM initialization is done and
before S3 boot script is executed, this GUID is installed as PPI in
PEI and protocol in SMM environment. It allows for PEIMs or SMM
drivers to hook this point and do the required tasks.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
when the SECTION FV_IMAGE = $(XX)/XX.Fv, the Fv file should relative to
WORKSPACE, so when we search the XX.Fv.txt file, we should search the
path relative to workspace first.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For the case that the structure PCD has no value assignment in DSC,
but has value assignment in command line.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Case 1. A Pcd has no default sku setting in DSC.
Case 2. Build as Single SKU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Handle the Pcd maxsize issue for the case
that the length of Pcd value from CommandLine
bigger that its maxsize
2. The Pcd value override in commandline.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
DSC Components section support flexible PCD, and for binary driver, we
need patch this value. Update the split char ',' not ', ' because some
value may have space, while others may not have this space.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
TPL deadlock issue was enrolled by the commit of 39b0867d. To resolve the issue,
this patch separated the timer ticking for all the MTFTP clients to calculate the
packet live time in TPL_NOTIFY level.
Cc: Wang Fan <fan.wang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v3: LaneEqualizationControl is changed to be an array.
v2: The structure is updated to include all the fields defined
in the PCI-E specification.
The header includes Physical Layer PCI Express Extended Capability definitions
described in section 7.7.5 of PCI Express Base Specification rev. 4.0.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Felix Polyudov <felixp@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The default value of PcdExtFpdtBootRecordPadSize is 0x20000
But the following commit in master update it to 0 by mistake.
SHA-1: 052c98ce24
Subject: MdeModulePkg: Add ResetSystemPei PEIM
This patch is to restore the value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Currently DxeCorePerformanceLib will get SMM performance data based
on SMM communication handler. If SMM communication handler returns error,
the library will ASSERT. In fact, if SMM perf data is not found.
DXE perf data can still be dumped. So using status check instead of
ASSERT is better.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The previous commit 137ed15511
* MdeModulePkg/DebugLib: Print partial when format string is too long
copies partial format string to DEBUG_INFO buffer but when parsing
the format modifier, the original format string is still used.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Per the request to support HttpMethodDelete:
https://bugzilla.tianocore.org/show_bug.cgi?id=879,
This patch is to enable the HTTP Delete Method.
Cc: Karunakar P <karunakarp@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The issue was enrolled by the commit of ceec3638. One of the change in the commit
was to return the status from NetMapIterate in Udp6Groups function. But it should
not return EFI_ABORTED directly in case McastIp is not NULL, which means to terminate
the iteration and leave the McastIp successfully.
Cc: Wang Fan <fan.wang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
For IPv6 case, if one invalid URL returned from DHCP server, HttpBootDxe
driver could not retrieve the URL host address from DNS server. In such a
case, the error message should be printed as:
Error: Could not retrieve the host address from DNS server.
Instead of:
Error: Could not discover the boot information for DHCP server.
Then, we can still output as following:
Error: Could not retrieve NBP file size from HTTP server.
Besides, currently implementation in HttpBootLoadFile will always output
error message even the HTTP process is correct.
This patch is to fix above issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The patch is to fix the incorrect parameter check for the HttpBootGetFileFromCache().
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The root cause is the byte array value in the driver Pcd, some bytes
have additional space character, while the value in DSC file doesn't
have this space, it cause the string compare return false, so we remove
the extra space.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When run GenFds, GlobalData.gConfDirectory is None, On Linux
self._ToolChainFamily default Value is "MSFT", and then
generate the wrong PcdValueInit Makefile
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Laszlo Ersek
Ruiyu Ni
Yonghong Zhu
Star Zeng
Hao Wu
Feng, Bob C
Yunhua Feng
Fu Siyuan
Feng, YunhuaX
Felix Polyudov
Marc-André Lureau
Dandan Bi
Jiaxin Wu
Jiewen Yao