The driver binding start function in SNP.c goes through all the BARs and get
the last BAR index for use. Theoretically it should work with all valid BARs,
but we got reports some device did always use the first valid BAR, so we change
the logic in SNP to use the first found BAR index instead of the last one.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18455 6f19259b-4bc3-4df7-8a09-765794883524
PXE driver's LoadFile protocol should check the input parameter
FilePath to see whether it's a supported device path.If not,
it should return invalid parameter, do not continue PXE boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18435 6f19259b-4bc3-4df7-8a09-765794883524
Add driver to produce EFI_REGULAR_EXPRESSION_PROTOCOL. Based on
Oniguruma v5.9.6 (BSD 2-clause license), which provides full Unicode
support, and POSIX ERE and Perl regex syntaxes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18413 6f19259b-4bc3-4df7-8a09-765794883524
Add driver to produce EFI_REGULAR_EXPRESSION_PROTOCOL. Based on
Oniguruma v5.9.6 (BSD 2-clause license), which provides full Unicode
support, and POSIX ERE and Perl regex syntaxes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18411 6f19259b-4bc3-4df7-8a09-765794883524
Our tool can support OrderedList which has default value,but doesn't update the
source code in HiiDatabase when parse the ifr data.Now update the code and add
test case in DriverSample.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18388 6f19259b-4bc3-4df7-8a09-765794883524
Modified the logic in Ip4Dxe and Ip6Dxe to not locate EFI_IPSEC2_PROTOCOL on each
message transmit/receive. Instead, register a callback in the drivers entry points
on the IpSec protocol installation, and process only if the protocol is installed.
This speeds up the network stacks when IpSec is not installed since there is a
penalty associated with searching the entire handle database on each packet processing.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hp.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18365 6f19259b-4bc3-4df7-8a09-765794883524
Previously construct Default Value in AltResp for string opcode is String Id,
Now change it to string value if the string opcode has default value.
This change is compatible for SetupBrowser to handle.And add default value
for string in DriverSample to test this case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18337 6f19259b-4bc3-4df7-8a09-765794883524
There may be anti-flash wear out feature to forbid erase operation after end of dxe.
The code is missing some error handling for erase operation failure,
it should return directly after the erase operation failed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18320 6f19259b-4bc3-4df7-8a09-765794883524
Since the variable check service has be separated to VarCheckLib
from Variable driver, so update Variable driver to consume the
separated VarCheckLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18286 6f19259b-4bc3-4df7-8a09-765794883524
Check the local variable 'NameSpace' before use it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18274 6f19259b-4bc3-4df7-8a09-765794883524
Ip4StartAutoConfig() will always free its default router table and interface,
which may cause IP instance missing its correct default interface. e.g. when
the policy is dhcp, and one child is configured to use default address.
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviwed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18245 6f19259b-4bc3-4df7-8a09-765794883524
v2:
* Update the MediaPresent detect declaring.
IP4 driver should re-initiate a DHCP if it detects that there is a network.
To fix this issue, we can implement the DHCP re-initiate policy while the media
change detected. The Ip4 driver should set a timer to signal the Ip4 to run the
DHCP configuration again(D.O.R.A). IP4 driver should free old IP address related
resource, then initiate a DHCP process to acquire new IP.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Lubo Zhang <lubo.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18232 6f19259b-4bc3-4df7-8a09-765794883524
between variable HOB and NV storage.
Variable HOB may be built by a system that supports and loads variable
default, the variables in the HOB will be flush to NV storage after
variable write search ready.
After that, if the variable's Attributes is changed by someone and
system reboots and tries to load default again, the variable Attributes
mismatch case between variable HOB and NV storage will appear.
Original code did not handle the case correctly, that may eventually
cause NV storage contains two valid same variables that will lead to
system hang if GetNextVariableName() called.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18225 6f19259b-4bc3-4df7-8a09-765794883524
DHCP policy is applied as default at boot time on all NICs in the system, which results
in all NIC ports attempting DHCP and trying to acquire IP addresses during boot.
Ip4 driver should only set dhcp as default policy, and not trigger DORA at driver binding
start(). We should start DORA until one IP child is configured to use default address.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18201 6f19259b-4bc3-4df7-8a09-765794883524
Change a macro name to fit EDK2 naming conventions: Use all capital letters for #define.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: fanwang2 <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18200 6f19259b-4bc3-4df7-8a09-765794883524
Once the question is refreshed,the processing should happen in the callback function
of EFI_BROWSER_ACTION_RETRIEVE case,rather than EFI_BROWSER_ACTION_CHANGING in DriverSample.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18150 6f19259b-4bc3-4df7-8a09-765794883524
If the storage of the question is EFI_HII_VARSTORE_BUFFER/EFI_HII_VARSTORE_EFI_VARIABLE_BUFFER,
in SetupBrowserDxe the configuration stings contain uppercase,but HiiDataBaseDxe generates the
ConfigResp string in lowercase,they mismatch,so FindQuestionFromProgress function is broken.
Now convert the configuration string in SetupBrowserDxe to lowercase to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18143 6f19259b-4bc3-4df7-8a09-765794883524
This fix is used to solve VS2015 warning "local variable is not initialized before use"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18108 6f19259b-4bc3-4df7-8a09-765794883524
DHCP4 service allows only one of its children to be configured
in the active state,If the DHCP4 D.O.R.A started by IP4 auto
configuration and has not been completed, the Dhcp4 state machine
will not be in the right state for the PXE to start a new round
D.O.R.A., so we need to switch it's policy to static.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18107 6f19259b-4bc3-4df7-8a09-765794883524
When load default value or save changes will pop up message box to let user
confirm,Y means confirm and N means ignore,now add Esc key with the
same function of N key.And change the content of pop up message in .uni file,
now will display "Press 'Y' to confirm, 'N'/'ESC' to ignore."
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18076 6f19259b-4bc3-4df7-8a09-765794883524
Enhance the setupbrowserdxe to output debug message when DisplayEngineDxe is
not installed and this will be easy for user to find the reason why can not
enter Setup page.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18075 6f19259b-4bc3-4df7-8a09-765794883524
Reduce reserved memory consumption by page table buffer,
then OS can have more available memory to use.
Take PhysicalAddressBits = 48 and 2MB page granularity as example,
1:1 Virtual to Physical identity mapping page table buffer needs to be
((512 + 1) * 512 + 1) * 4096 = 1075843072 bytes = 0x40201000 bytes.
The code is updated to only allocate 2 pages (1G page enabled) or
6 pages for 4G page table, and 8 extra pages to handles > 4G request
by page fault.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18070 6f19259b-4bc3-4df7-8a09-765794883524
We are going to reduce reserved memory consumption by page table buffer,
then OS can have more available memory to use.
Take PhysicalAddressBits = 48 and 2MB page granularity as example,
1:1 Virtual to Physical identity mapping page table buffer needs to be
((512 + 1) * 512 + 1) * 4096 = 1075843072 bytes = 0x40201000 bytes.
The code is updated to build 4G page table by default and only use 8 extra
pages to handles > 4G request by page fault.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18069 6f19259b-4bc3-4df7-8a09-765794883524
We are going to reduce reserved memory consumption by page table buffer,
then OS can have more available memory to use.
Take PhysicalAddressBits = 48 and 2MB page granularity as example,
1:1 Virtual to Physical identity mapping page table buffer needs to be
((512 + 1) * 512 + 1) * 4096 = 1075843072 bytes = 0x40201000 bytes.
Current BootScriptExecutorDxe handles > 4G request by page fault because
S3ResumePeim only builds 4G page table when long mode waking vector is
not needed, but BootScriptExecutorDxe still assume the page table buffer for
page table is at 1:1 Virtual to Physical identity mapping.
To reduce reserved memory consumption, the code is updated to only use
8 extra pages to handles > 4G request by page fault.
Another, when both BIOS and OS wants long mode waking vector,
S3ResumePei should have established 1:1 Virtual to Physical identity mapping
page table for ACPI spec requirement, so no need to hook page fault handler.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18067 6f19259b-4bc3-4df7-8a09-765794883524
As variable HEADER_ALIGNMENT = 4, the MonotonicCount in
AUTHENTICATED_VARIABLE_HEADER may be not UINT64 aligned,
so go to use ReadUnaligned64() to ensure read data correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18064 6f19259b-4bc3-4df7-8a09-765794883524
GatewayIpAddress and SubnetMask do not exist in old IPv4_DEVICE_PATH, this
will lead new IScsiDxe to error if IPv4_DEVICE_PATH in system is not
updated.
Following UEFI2.5 spec of IPv4_DEVICE_PATH do a check before accessing
fields only defined in new version, add a judgement here to make old
IPv4_DEVICE_PATH and new IScsiDxe can cowork.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: fanwang2 <fan.wang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
[lersek@redhat.com: rewrapped commit message]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18057 6f19259b-4bc3-4df7-8a09-765794883524
When mismatch happens,there exists one case that exit current
form and display last form.Assert code don't cover this case.
Now add check to handle this situation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18053 6f19259b-4bc3-4df7-8a09-765794883524
The first parameter of match2 opcode should be the pattern
and the second one should be the string.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18052 6f19259b-4bc3-4df7-8a09-765794883524
if the instance of the DHCP4 protocol driver is in the Dhcp4Bound
status that is DHCP configuration has completed, so the Dhcp4->Start
FUNC in the EfiPxcBcDhcp() will return EFI_ALREADY_STARTED status
which lead to EfiPxeBcDhcp FUNC not in correspondence with UEFI spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
[lersek@redhat.com: updated copyright year as Siyuan asked]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18050 6f19259b-4bc3-4df7-8a09-765794883524
Fix git 59a8cfd4 (SVN r17869) removes DHCP4.TransmitReceive()and DORA
process dependency, but it updated TransmitReceive() to take the ownership
of DhcpSb->ActiveChild but never release it. This will break the retransmit
and lease time out counter of DORA.
To fix that, TransmitReceive() doesn't need to be the ActiveChild, and the
timer routine should be updated to handle the TransmitReceive specially.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18048 6f19259b-4bc3-4df7-8a09-765794883524
This driver is soon going to be built by ArmVirtPkg/ArmVirtQemu.dsc
(without any changes). Although VALID_ARCHITECTURES is not used by the
build system (it is just a comment), it is best kept up-to-date for human
readers' sake.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Elvin Li <elvin.li@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18041 6f19259b-4bc3-4df7-8a09-765794883524
1. Get default terminal type from PCD rather than using PCANSI
directly in BuildTeminalDevpath;
2. Only terminal type is needed to create an TerminalDev instance, so
remove the useless code of creating and freeing DefaultNode.
3. Some white space refining.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18027 6f19259b-4bc3-4df7-8a09-765794883524
This is bug fix for TerminalDxe: NullRemaining should be set to FALSE
by fault and then be set to TRUE conditionally.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18026 6f19259b-4bc3-4df7-8a09-765794883524
Ip4ConfigDxe driver is deprecated in UEFI 2.5, so we will not support original Ip4Config Protocol,
which is replace by Ip4Config2 Protocol integrated in Ip4Dxe driver(git commit 1f6729ff (SVN r17853)).
Dependent network drivers, libraries and applications have been migrated to (or extended to) the new protocol version.
For example:
git 7c25b7ea (SVN r17869): ping & ifconfig
git 00a6ad1b (SVN r17870): UefiHandleParsingLib
git 6c5c70d6 (SVN r17873): DxeNetLib
git 39561686 (SVN r17874): IpSecDxe
git c581e503 (SVN r17875): EfiSocketLib
This patch is based on related packages(MdeModulePkg, Nt32Pkg, ArmPlatformPkg, ArmVirtPkg, EmulatorPkg, OvmfPkg, Vlv2TbltDevicePkg) clean-up work finished.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17917 6f19259b-4bc3-4df7-8a09-765794883524
FvSimpleFileSystem adds '.efi' to the EFI application and drivers
filenames even through this extension is not present in the real
filename of the EFI module.
In the current behaviour, it would not be possible to open an EFI
application using FvSimpleFileSystem if the extension has been omitted
in the given filename.
It can be create some confusion if someone wants to try to
open a file with the real application name (eg: 'Shell').
This patch adds support to try again to look for the file with the
extension if it had failed to find it without the extension.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17903 6f19259b-4bc3-4df7-8a09-765794883524
Accept the VT220 escape code [3~ as backspace for TtyTerm terminals. This is
sent by many Linux terminals by default. Also accept VT220 function keys
F1-F12, and VT100 F1-F4 keys as these are commonly sent by Linux terminals.
The VT220 escape codes are longer, and variable length so a new state is added
to the state machine along with a variable to construct the multibyte escape
sequence.
There are currently no ambiguous escape sequence prefixes accepted, so the TTY
terminal accepts escape sequences for a variety of terminals. The goal is to
'just work' with as many terminals as possible, rather than properly emulating
any specific terminal. Backspace, Del, and F10 have been tested on xterm,
rxvt, tmux, and screen.
Note: The existing vt100 function key handling does not match the vt100
documentation that I found, so I added the TTY terminal handling
of VT100 F1-F4 (really PF1-PF4 on vt100) separately. The vt100
has no F5-F10 keys, so I don't know what the current vt100 code
is based on.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17897 6f19259b-4bc3-4df7-8a09-765794883524
Treat ASCII 0x7F as backspace, rather than delete, for TTY terminals. This
better matches the default Linux terminal settings that are used when connecting
to a simulated platform using xterm or a similar terminal program.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17896 6f19259b-4bc3-4df7-8a09-765794883524
This patch a adds new terminal type, TtyTerm, to TerminalDxe. This terminal
type provides a place to add support for various *nix terminals that don't
behave like standard VT terminals. The goal is to 'just work' with as many
terminals as possible, rather than properly emulating any one specific
terminal.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17895 6f19259b-4bc3-4df7-8a09-765794883524
UEFI spec has clear description below:
Configuration Table Groups
The GUID for a configuration table also defines a corresponding event group GUID with the same value.
If the data represented by a configuration table is changed,
InstallConfigurationTable() should be called.
When InstallConfigurationTable() is called, the corresponding event is signaled.
When this event is signaled,
any components that cache information from the configuration table can optionally update their cached state.
For example, EFI_ACPI_TABLE_GUID defines a configuration table for ACPI data.
When ACPI data is changed, InstallConfigurationTable() is called.
During the execution of InstallConfigurationTable(),
a corresponding event group with EFI_ACPI_TABLE_GUID is signaled,
allowing an application to invalidate any cached ACPI data.
But current implementation only InstallConfigurationTable() at first time ACPI data change.
if (((Version & EFI_ACPI_TABLE_VERSION_1_0B) != 0) &&
!AcpiTableInstance->TablesInstalled1) {
Status = gBS->InstallConfigurationTable (&gEfiAcpi10TableGuid, AcpiTableInstance->Rsdp1);
if (EFI_ERROR (Status)) {
return EFI_ABORTED;
}
AcpiTableInstance->TablesInstalled1 = TRUE;
}
if (((Version & ACPI_TABLE_VERSION_GTE_2_0) != 0) &&
!AcpiTableInstance->TablesInstalled3) {
Status = gBS->InstallConfigurationTable (&gEfiAcpiTableGuid, AcpiTableInstance->Rsdp3);
if (EFI_ERROR (Status)) {
return EFI_ABORTED;
}
AcpiTableInstance->TablesInstalled3= TRUE;
}
The AcpiTableInstance->TablesInstalled1 and AcpiTableInstance->TablesInstalled3 conditional judgment need to be removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17885 6f19259b-4bc3-4df7-8a09-765794883524
The call in ProbeMediaStatus() to the ReadDisk() function of the
EFI_DISK_IO_PROTOCOL interface implemented in DiskIoDxe/DiskIo.c
crashed in DiskIo2ReadWriteDisk() because of the NULL value of
the destination buffer pointer.
Pass the address of a buffer in the stack instead of a NULL
pointer.
In addition to avoiding the crash, that way, the media probe does not
depend anymore on the way the EFI_DISK_IO_PROTOCOL implementation deals
with a NULL value of the destination buffer pointer as the UEFI
specification does not specify the expected behaviour.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17859 6f19259b-4bc3-4df7-8a09-765794883524
and also add new UI configuration support in Ip4Dxe driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: jiaxinwu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17853 6f19259b-4bc3-4df7-8a09-765794883524
MdeModulePkg has defined gZeroGuid in 'Guid/ZeroGuid.h', therefore, the
mZeroGuid defined in Universal/Variable/RuntimeDxe is redundant.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17840 6f19259b-4bc3-4df7-8a09-765794883524
MdeModulePkg has defined gZeroGuid in 'Guid/ZeroGuid.h', therefore, the
gZeroGuid defined in SetupBrowserDxe is redundant.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17839 6f19259b-4bc3-4df7-8a09-765794883524
1. When Property->Attributes == 0, don't check input Attributes.
2. Enhance comments to be indent aligned and debug message
to be aligned with other messages.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17794 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Merge from Auth Variable driver in SecurityPkg to Variable drive in
MdeModulePkg. Then the merged Variable driver in MdeModulePkg will
link to AuthVariableLib and TpmMeasurementLib.
AuthVariableLibNull and TpmMeasurementLibNull in MdeModulePkg
could be used for non auth variable support.
AuthVariableLib and DxeTpmMeasurementLib in SecurityPkg
may be used for auth variable support.
Why to do:
1. Remove code duplication and reduce maintenance effort.
After auth variable service separated from Auth Variable driver in SecurityPkg
to AuthVariableLib. The remaining code logic of Auth Variable driver in SecurityPkg
will be almost same with Variable driver in MdeModulePkg. Now it is to
merge them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17765 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Add AuthVariableLib LibraryClass definitions.
2. Implement a NULL AuthVariableLib library instance.
3. Add VARIABLE_ENTRY_PROPERTY definition to VarCheck.h.
4. Add VARIABLE_ENTRY_CONSISTENCY and variable attribute
combinations definitions to VariableFormat.h.
Why to do:
1. Share code.
1.1. Separate auth variable service from Auth Variable driver in
SecurityPkg to AuthVariableLib. Then the AuthVariableLib could benefit
and be used by different implementation of Auth Variable drivers.
1.2 The VARIABLE_ENTRY_PROPERTY definition to VarCheck.h,
VARIABLE_ENTRY_CONSISTENCY and variable attribute
combinations definitions to VariableFormat.h will be shared
by merged Variable driver and AuthVariableLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17757 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Merge from VariablePei in SecurityPkg to VariablePei in MdeModulePkg.
Why to do:
1. Remove code duplication and reduce maintenance effort.
The code logic of VariablePei in SecurityPkg is same with VariablePei
in MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17756 6f19259b-4bc3-4df7-8a09-765794883524
in function scope that are assigned but never used afterwards.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17664 6f19259b-4bc3-4df7-8a09-765794883524
System hangs when RTC time rollover 1999 to 2000
Error processing of GetTime function:
If get time fail,the date/time will display ??,
and update help info to let user know get time fail.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17651 6f19259b-4bc3-4df7-8a09-765794883524
VariableLock in VariableSmmRuntimeDxe.c is installed in EntryPoint now.
It works based on SMM variable handler by SMM communication with
payload buffer. But the payload buffer and SMM variable handler will
be not ready in EntryPoint before SmmVariableReady() call back.
VarCheck in VariableSmmRuntimeDxe.c has the same issue,
so move VarCheck install into SmmVariableReady() also.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17626 6f19259b-4bc3-4df7-8a09-765794883524
Display engine base on class opcode to detect whether in
front page.Now remove class/subclass and use FormsetGuid
or ClassGuid to judge whether in front page
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17590 6f19259b-4bc3-4df7-8a09-765794883524
ARM toolchain raises the error: "statement is unreachable"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17529 6f19259b-4bc3-4df7-8a09-765794883524
fix bellow bug:
change checkbox from FALSE to TRUE.EFI_BROWSER_ACTION_CHANGED called
but when checkbox change back to FALSE,don't call EFI_BROWSER_ACTION_CHANGED
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17512 6f19259b-4bc3-4df7-8a09-765794883524
class/subclass is the obseleted key word in VFR file. It is designed in framework HII.
After convert to UEFI HII, it is not used any longer. Now remove them from VFR
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17493 6f19259b-4bc3-4df7-8a09-765794883524
Remove the unused DevicePathSize variable from EnumerateAllKeywords().
Due to our use of -Werror=unused-but-set-variable when building under GCC, the presence of DevicePathSize is breaking the build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17448 6f19259b-4bc3-4df7-8a09-765794883524
SVN r17428 ("MdeModulePkg: Implement UEFI25 HII Config keyword handler protocol") introduced code that triggers
-Werror=pointer-sign
under gcc ("warn for pointer argument passing or assignment with different signedness"). This patch fix up those locations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17445 6f19259b-4bc3-4df7-8a09-765794883524
It provides a repository to cache ESRT info for FMP or Non-FMP instance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Gao Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17426 6f19259b-4bc3-4df7-8a09-765794883524
Change the code to listen EFI_SW_DXE_BS_PC_LEGACY_BOOT_EVENT instead of the Legacy Boot event to provide more precise performance data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17377 6f19259b-4bc3-4df7-8a09-765794883524
In order to support default value for orderedlist opcode, support buffer type value for default/oneofoption opcode.
If oneofoption used as a default value, it will not be added to normal option list.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17336 6f19259b-4bc3-4df7-8a09-765794883524
DriverHealthManagerDxe provides a driver health management VFR form
which will be sent by UefiBootManagerLib when booting a boot option.
It also provides another driver health management VFR form which will
be included by certain boot manager menu through the VFR class GUID.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17331 6f19259b-4bc3-4df7-8a09-765794883524
BdsDxe driver links to UefiBootManagerLib and PlatformBootManager to
provide a pure UEFI boot manager conforming to the UEFI spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17328 6f19259b-4bc3-4df7-8a09-765794883524
Boot mode maybe changed at any point during the PEI phase, therefore, boot
mode should be checked later rather at entry point.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17323 6f19259b-4bc3-4df7-8a09-765794883524
- SVN r14866:
MdePkg and MdeModulePkg Pcd: Add the new EFI_GET_PCD_INFO_PROTOCOL and
EFI_GET_PCD_INFO_PPI support for PI 1.2.1 compliance.
added the "DataBase" local variable to PcdPeimInit(), and both set it and
used it.
- SVN r14869:
MdeModulePkg and Nt32Pkg Pcd: Add the new EFI_GET_PCD_INFO_PROTOCOL and
EFI_GET_PCD_INFO_PPI support for PI 1.2.1 compliance.
changed the PcdPeimInit() function, but "DataBase" remained both set and
used.
- SVN r17173:
MdeModulePkg Pcd: Check the input SkuId in SetSku()
changed the function again; and this time "DataBase" became
set-but-unused. It triggers the following build error, when building
ArmVirtualizationQemu.dsc with gcc-4.8:
MdeModulePkg/Universal/PCD/Pei/Pcd.c:150:21: error: variable 'DataBase'
set but not used [-Werror=unused-but-set-variable]
PEI_PCD_DATABASE *DataBase;
^
cc1: all warnings being treated as errors
Fix the error by removing the DataBase variable, restoring the pre-r14866
state locally, when the BuildPcdDatabase() function was called, but its
return value was thrown away.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17179 6f19259b-4bc3-4df7-8a09-765794883524
then GetSku() could return the currently active SkuId.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17173 6f19259b-4bc3-4df7-8a09-765794883524
RFC1323 says the most recently received TSVal must be echoed in TSecr in ACK packets
which was not done at first connection because the code saving the TSVal from the peer
was skipped at this point. This resulted in sending an ACK reply with a 0 TSecr that
was rejected at least by FreeBSD. This patch fixes this by updating the saved TSVal
also for connection initiation packets.
Thanks to Laszlo Ersek for analysis and help in debugging.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17165 6f19259b-4bc3-4df7-8a09-765794883524
Also update PCD_SERVICE_PEI_VERSION and PCD_SERVICE_DXE_VERSION to match with
the new PcdDataBase binary generated by BaseTools.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17161 6f19259b-4bc3-4df7-8a09-765794883524
to just return EFI_SUCCESS if the variable has been in the locked list.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17141 6f19259b-4bc3-4df7-8a09-765794883524
to handle the case PE file alignment is not same as PE section alignment.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17063 6f19259b-4bc3-4df7-8a09-765794883524
Add SMBIOS 64-bit entry point and 64-bit table support for SMBIOS 3.0.
Introduce PcdSmbiosEntryPointProvideMethod to produce 32-bit or 64-bit
SMBIOS table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17051 6f19259b-4bc3-4df7-8a09-765794883524
to return EFI_NOT_FOUND when a specified variable doesn't exist and
Data parameter is NULL but DataSize parameter is valid in GetVariable() invocation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17030 6f19259b-4bc3-4df7-8a09-765794883524
Some compilers requires an empty line at the end of the file.
ARM compiler version 5 is one of these compilers:
error #1-D: last line of file ends without a newline
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16918 6f19259b-4bc3-4df7-8a09-765794883524
As the drivers and library do not reference gEfiSmmAccess2ProtocolGuid explicitly now
after SmmMemLib introduced.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16760 6f19259b-4bc3-4df7-8a09-765794883524
for trying to reclaim variable space at EndOfDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16687 6f19259b-4bc3-4df7-8a09-765794883524
And leave the variable error flag in NV flash as the last boot variable error flag.
After EndOfDxe in InitializeVarErrorFlag (), the variable error flag in NV flash
will be initialized to this local current boot variable error flag.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16684 6f19259b-4bc3-4df7-8a09-765794883524
The code in AcpiTableDxe handles the installation of FADT and FACS in both
possible orders. In the [FADT, FACS] installation order, the FACS is at
once linked into the FADT. In the [FACS, FADT] installation order, the
FACS is stashed temporarily, and it is linked into the FADT when the FADT
is installed later.
According to the ACPI specification, *at most one* of FADT.FirmwareCtrl
and FADT.XFirmwareCtrl may be nonzero. The code is aware of this
requirement, and it never sets both of them to nonzero values at once.
However, the code doesn't expect the following:
- The caller first installs the FACS, which is stashed. The address that
is saved happens to fall below 4GB.
- The caller then installs a FADT, with a zero FirmwareCtrl field, and a
nonzero (pre-populated) XFirmwareCtrl field.
In this case the code sets FADT.FirmwareCtrl to the less-than-4GB address
of the stashed FACS, and leaves the different nonzero value in
FADT.XFirmwareCtrl. This violates the ACPI specification.
Prevent this by always zeroing the field that we do *not* set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16659 6f19259b-4bc3-4df7-8a09-765794883524
El Torito format can be used on different media (eg: USB).
A ISO image can be dumped onto a USB mass-storage.
These media might not have the same block size as the CDROM media (ie: 2KB).
The El Torito code and the specification assumes a LBA 2KB.
In addition, the specification says in "12.3.4.4 CD-ROM and DVD-ROM":
UEFI code does not assume a fixed block size.
I was able to dupliacte the issue by copying a debian ISO on a USB driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16600 6f19259b-4bc3-4df7-8a09-765794883524
and follow UEFI spec to check UEFI defined variables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16579 6f19259b-4bc3-4df7-8a09-765794883524
This module implements Simple FileSystem protocol over Firmware Volume (FV).
EFI Modules included into a FV can be listed and launched from the EFI Shell or any other EFI applications.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16547 6f19259b-4bc3-4df7-8a09-765794883524
The GNU assembler (2.24.51.20140918) is failing to build when movw is used on this instruction.
Instead use the mov instruction, which matches the other cases of loading segment registers.
The error message seen is:
AsmFuncs.iii:283: Error: incorrect register `%rax' used with `w' suffix
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16529 6f19259b-4bc3-4df7-8a09-765794883524
- Fix EFI_IPv4_ADDRESS usages to use a macro to copy the structure
instead of direct assignment, to avoid runtime alignment errors.
- Fix a EFI_INPUT_KEY usage in TerminalDxe to use CopyMem() to copy the
structure instead of direct assignment, to avoid runtime alignment error.
- Delete excess local variables that are initialized but otherwise unused.
- CompilerIntrinsicsLib library now imported for AARCH64, as well as ARM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Randy Pawell <randy_pawell@hp.com>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16471 6f19259b-4bc3-4df7-8a09-765794883524
DXE FpdtStatusCodeHandler is required to be unregistered even if StatusCodeReport is disabled. This change makes sure FpdtStatusCodeHandler be always unregistered.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Vincent Zimmer <vincent.zimmer@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16470 6f19259b-4bc3-4df7-8a09-765794883524
that can cause an exception. mPeiExMapppingTableSize is the table size, but the
code needs to check the entry number.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hp.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16448 6f19259b-4bc3-4df7-8a09-765794883524
When scroll menu to the one not shows in current form, and this menu has option mismatch error, current display engine will not highlight this menu.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16447 6f19259b-4bc3-4df7-8a09-765794883524
Based on the input request to get default value for questions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16413 6f19259b-4bc3-4df7-8a09-765794883524
DiskIoDxe: Fix ReadDiskEx and WriteDiskEx to not modify the user’s buffer when the BufferSize is 0.
DiskIoDxe: Fix ReadDiskEx and WriteDiskEx hang issue when the submitted blockio2 task is completed before submitting another blockio2 task.
DiskIoDxe: Fix FlushEx to free the flush task item in callback (memory leak issue).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16215 6f19259b-4bc3-4df7-8a09-765794883524
1. Work space and spare block must be in a FVB with FV header.
Updated to work space and spare block could be in independent FVBs that are without FV header.
2. NV region, work space and spare block must have same BlockSize.
Updated to NV region, work space and spare block could have different BlockSize.
3. Works space size must be <= one block size.
Update to work space size could be <= one block size (not span blocks) or > one block size (block size aligned).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16201 6f19259b-4bc3-4df7-8a09-765794883524
Before get default value for each questions, call ExtractConfig function to get the altcfg string for all formset. Later when question try to get default value from AltCfg string, just get the value from the saved altcfg string instead of call ExtractConfig function to get it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16162 6f19259b-4bc3-4df7-8a09-765794883524
even if the native function's arguments are less than 4.
From MSDN x64 Software Conventions, Overview of x64 Calling Conventions:
“The caller is responsible for allocating space for parameters to the
callee, and must always allocate sufficient space for the 4 register
parameters, even if the callee doesn’t have that many parameters.
This aids in the simplicity of supporting C unprototyped functions,
and vararg C/C++ functions.”
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud elhaj@hp.com
Reviewed by: Jiewen Yao <Jiewen.Yao@intel.com>
Reviewed by: Feng Tian <Feng.Tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16152 6f19259b-4bc3-4df7-8a09-765794883524
1. Module UNI and Package UNI files are not DOS format. Convert them to DOS format.
2. Remove unused SectionExtractionDxeModStrs.uni and SectionExtractionPeiModStrs.uni
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16044 6f19259b-4bc3-4df7-8a09-765794883524
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.
3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15963 6f19259b-4bc3-4df7-8a09-765794883524
1. Usage information in INF file comment blocks are either incomplete or incorrect.
This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes.
The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15962 6f19259b-4bc3-4df7-8a09-765794883524
Eric Dong
Fu Siyuan
Dandan Bi
Zhang Lubo
Cecil Sheng
Samer El-Haj-Mahmoud
Sunny Wang
Liming Gao
Star Zeng
Ruiyu Ni
Jiaxin Wu
fanwang2
Michael D Kinney
Laszlo Ersek
Heyi Guo
Roy Franz
Olivier Martin
Ronald Cron
Hao Wu
Qiu Shumin
Ard Biesheuvel
Yao, Jiewen
Feng Tian
Chao Zhang
BALATON Zoltan
Elvin Li
Ye Ting
Dong Guo
Brendan Jackman
Jordan Justen
Randy Pawell
Samer El-Haj-Mahmoud
Samer El-Haj-Mahmoud elhaj