REF: https://bugzilla.tianocore.org/show_bug.cgi?id=340
The decoding of TPM Device (Type 43) has been added at
e9f0be021b.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
if we set a static IP using command
'ifconfig -s eth0 static 192.168.0.121 255.255.255.0 0.0.0.0'
The system says 'Failed to set address.' but using
'ifconfig -l', the static IP can be assigned successfully.
so we need to check the gateway validity before setting manual
address to keep the ifconfig -s command more consistent.
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=345
When I am adding SMBIOS spec 3.1.0 support, I found the decoding
of SMBIOS spec 3.0.0 for some definitions is missing.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=344
SlotType AGP8X was added in SMBIOS spec 2.3.4, but the decoding
of it is missing. I found it when I am adding SMBIOS spec 3.1.0
support.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When we issue 'ifconfig6 -s <interface> auto' system hangs with
an ASSERT in StrLen. in IfConfig6SetInterfaceInfo, for 'auto' case
we added checks to rule out the invalid inputs like 'host', 'gw'
and 'dns'. To parse through this, we do a VarArg = VarArg->Next but
we dont check new VarArg before calling StrCmp. Fix with a check
in this patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Added decoding of the new SMBIOS Type 43 record.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Augustine Linson P <linson.augustine@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The smbiosview command was not displaying SMBIOS Type 3 Height, NumberofPowerCords, or SKU Number.
Added handling to display these values.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=332
When the ShellLib ShellExecute() API or the Shell
Protocol Execute() API are used to execute a
command, the arguments are parsed to produce the
Argc/Argv list in the Shell Parameters Protocol and
double quotes are removed from arguments that are
surrounded by double quotes. This is the required
behavior of the Shell Parameters Protocol.
The ProcessCommandLine() function in the shell
implementation uses the Argc/Argv list from the
Shell Parameters Protocol to assemble a new command
line, but the double quotes that may have been
originally present for an argument are not preserved.
ProcessCommandLine() is updated to check if an
argument added to the generated command line
contains one or more white space characters, and
if it does, double quotes are added around the
argument.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
To follow Shell spec 2.2, change "dh" to support dump from
protocol GUID and support "decode" parameter to dump the
GUID/name mapping.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When ">v" is used to redirect the command output to environment
variable, the ending "\r\n\0" is removed before setting to environment
variable but the length is not updated.
It causes ">>v" fails to append data to the environment variable
created by ">v".
The patch fixes the above bug.
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When "fs0:dir"(drive letter without slash) is used as destination
of "cd", "cd" tries to change to "dir" in root directory of "fs0:".
It's incorrect. The correct behavior is to change to "dir" in
current directory of "fs0:"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Since the type of ShellStatus is SHELL_STATUS, we should use
SHELL_INVALID_PARAMETER instead of EFI_INVALID_PARAMETER.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
When ">v" is used to redirect the command output to environment
variable (e.g.: "echo xxx >v yyy"), we only called SetVariable()
to update the variable storage but forgot to update the cached
environment variables in gShellEnvVarList.
When updating the variable storage, the existing code unnecessary
saved the ending NULL character into variable storage.
The patch fixes all the above issues.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
v2: update the prompt message more readable.
It should display error prompt message when Ifconfig6 can
not configure correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed by : Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
When user types "mv -r fs0:\A\ fs1:\" under directory
"fs0:\A\B\", MV command should deny such movement.
The patch fixes the above issue.
It also denies moving current directory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This patch update the shell ping command to use timer service to calculate the
RTT time, instead of using the timer arch protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ni Ruiyu <ruiyu.ni@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The patch adds the "-sfo" support to "dmpstore" command.
When -l or -d is specified, -sfo is not supported.
When the variable specified by name and GUID cannot be found,
an error message is displayed; Otherwise, the SFO is displayed.
E.g.: "dmpstore -guid GuidThatDoesntExist -sfo" produces output
as:
ShellCommand,"dmpstore"
VariableInfo,"","GuidThatDoesntExist","","",""
"dmpstore NameThatDoesntExist -guid GuidThatDoesntExist -sfo"
produces output as:
ShellCommand,"dmpstore"
dmpstore: No matching variables found. Guid GuidThatDoesntExist, Name
NameThatDoesntExist
The difference between the above 2 cases is that former one only
specifies the GUID, but the latter one specifies both name and GUID.
Since not specifying GUID means to use GlobalVariableGuid,
"dmpstore NameThatDoesntExist -sfo" produces the similar output as
latter one.
I personally prefer to always produce SFO output for both cases.
But the above behavior is the discussion result between HPE engineers.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
DumpHex() and CatSDumpHex() are public library APIs but don't have
EFIAPI modifier. Add the missing EFIAPI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
'Ping6 TargetIp' is a valid command input but we bail out
when TargetIp is a link local address because we would want
the user to specify the NIC (via SourceIp) through which
he/she would want to ping to TargetIp. This patch updates
the help text to mention the same.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The patch adds "-fwui" support to reset command which is newly added
to Shell 2.2 spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When copy command prompts to overwrite an existing file, pressing
backspace continuously removes everything including the shell prompt.
So print only valid characters for file overwrite prompt.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The ping command uses PI CPU arch protocol to calculate the RTT time, which is
not allowed to use in UEFI shell. This patch updates it to use the UEFI timer
event and Stall service to estimate the system timer period.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
'-t or -terse' and '-s' flags are multiple exclusive
So when both flags are used together, command should report an error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Move Shell/ShellDynamicCommand/ShellParameters definitions from
ShellPkg to MdePkg.
The following patches will rename the header file name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
The more proper place for macro SHELL_FREE_NON_NULL is ShellLib.h
instead of ShellBase.h.
Modify Compress.c to resolve build failure due to this change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
The destination GUID comes first; from
"MdePkg/Include/Library/BaseMemoryLib.h":
> GUID *
> EFIAPI
> CopyGuid (
> OUT GUID *DestinationGuid,
> IN CONST GUID *SourceGuid
> );
Here "NewGuid" is the GUID looked up by GetGuidFromStringName(), and
"Guid" is where EfiShellGetGuidFromName() has to propagate that result to.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Tim Lewis <tim.lewis@insyde.com>
Reported-by: Tim Lewis <tim.lewis@insyde.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Tim Lewis <tim.lewis@insyde.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Clear up some help text for the TFTP shell command
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Allows cd command to go back to the root directory when 'cd \' executed in system.
This change prevents last PathRemoveLastItem() call which truncates '\' from 'fs0:\'
in desired root path which is required to set CWD to the root directory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
In ShellOpenFileByName() the file is opened using
gEfiShellProtocol->OpenFileByName().
It is supposed that if this call returns an EFI_ERROR, the function
should return that error immediately. However, this return was missing,
and if UnicodeCollationProtocol has not been located by this time, the
Status gets overwritten with LocateProtocol() call result, which
eventually erroneously returns EFI_SUCCESS to the Shell.c, and this
leads to attempt to execute a non-existent startup script, which fails,
and which in turn leads to Shell being unloaded with "Invalid parameter"
error. This patch fixes the bug.
Cc: Tapan Shah <tapandshah@hpe.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The HDiskImageSave() function copies a device path using
DuplicateDevicePath() and passes that device path to
gBS->LocateDevicePath() that changes the value of the
device path pointer. When FreePool() is called with the
modified device path pointer, the FreePool() service
generates an ASSERT() because the signature for the pool
head can not be found.
The function HDiskImageRead() immediately above
HDiskImageSave() has the correct algorithm that uses an
additional local variable called DupDevicePathForFree to
preserve the pointer to the allocated buffer so it can
be used in the call to FreePool().
Bug: <https://bugzilla.tianocore.org/show_bug.cgi?id=131>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
Update CRC32 in the EFI System Table header after shell changes the
value of gST->ConsoleOutHandle and gST->ConOut
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-By: Tapan Shah <tapandshah@hpe.com>
Reviewed-By: Jaben Carsey <Jaben.carsey@intel.com>
As per ECR 1416 change in UEFI Shell Specification 2.2,
enhancing 'cls' command to change the background color as well as
foreground color. Also add support to display current settings
using 'cls -sfo' command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Minor changes to match help output notes for disconnect command
with UEFI Shell 2.2 specification document.
Few other formatting changes to fit the help output in 80x25 screen size.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
As per ECR 1349, latest UEFI Shell 2.2 specification has removed current working directory
path ".;" from a default 'path' environment variable as current working directory always
search first in system.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
As per ECR 1349 change in UEFI Shell Specification 2.2, expanding
a special output file name to include "NULL". Previously it only
supported "NUL" as a special output file and it was case sensitive.
With this change both "NUL" and "NULL" are special output file and
checked as case insensitive.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
As per ECR 1416, latest UEFI Shell 2.2 Specification has added Persistent
Memory support in 'memmap' command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
As per ECR 1416, latest UEFI Shell 2.2 specification:
Define a behavior where 'disconnect -r' will disconnect drivers
from all devices but it will reconnect all consoles.
If -nc flag is used (e.g. 'disconnect -r -nc') then disconnect drivers
from all devices and don't reconnect consoles.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The ParseHandleDatabaseForChildControllers() function intends to work like
this:
(1) It allocates a "HandleBufferForReturn" local array that's guaranteed
to be big enough for all found handles,
(2) it collects the handles, both counting them in the (mandatory)
"MatchingHandleCount" output parameter, and saving them in the local
"HandleBufferForReturn" array,
(3) if the caller is not interested in the actual handles, then
"HandleBufferForReturn" is released,
(4) if the caller is interested in the handles, and we've found some, then
"HandleBufferForReturn" is passed out through the
"MatchingHandleBuffer" output parameter,
(5) if the caller is interested in the actual handles, but we've found
none, then the "MatchingHandleBuffer" output parameter is set to NULL.
The ASSERT() at the end of the function makes this clear, but the
implementation does not conform to (5). Fix it.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Tapan Shah <tapandshah@hpe.com>
Reported-by: Tapan Shah <tapandshah@hpe.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=112
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
According to PCI spec the next AER capability is relative to
the beginning of PCI configuration space. Hence substract the
base offset to get the next capability.
"-_e" option is changed from TypeFlag to TypeValue, so that
user can specify individual AER capability to print.
e.g. pci 00 00 01 -i -_e <capability-id>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Abdul Lateef Attar <abdul-lateef.attar@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
According to the latest shell spec, in function FindFiles(),
when no files were found, it should return EFI_NOT_FOUND.
But current codes don't follow the spec.
This patch is to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In shell spec, the usage of "Drvcfg" command is: drvcfg [-l XXX] [-c]
[-f <Type>|-v|-s] [DriverHandle [DeviceHandle [ChildHandle]]]
[-i filename] [-o filename]. The parameter number(doesn't include the flags)
cannot exceed 4, now we add this point to check whether using the command
correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
When user uses the command "bcfg driver|boot [dump [-v]]",
the number of command line value parameters (doesn't include the
flag) must be three. We can add this point to check whether using
this command correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
This reverts commit c0bcd3433f.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
This reverts commit 0fcf8d4df8.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
This reverts commit 95fc5a8775.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Add EFIAPI in CatPrint library function. Every function which uses
variable list need explicit use EFIAPI to force use MS ABI. This change
is needed to pass CLANG38 build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Use explicit CopyMem to replace compiler builtin to do the structure
values assignment. This change is needed to pass CLANG38 build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
“ls fs0:\File.txt" can list the file correctly but
when the backslash is removed from colon, the file cannot
be listed.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
When the FilePattern is similar to "fsx:EFI\BOOT", FindFiles()
cannot handle it correctly because it always assumes there is
"\\" after "fsx:".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
It should shows files in root directory of current map.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
It is to make the info shown more aligned with SMBIOS spec.
Cc: Amy Chan <amy.chan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Amy Chan <amy.chan@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Commit 9168df3dea
"ShellPkg/ShellProtocol.c: Handle memory allocation failure"
only keeps the protocol clean up in CleanUpShellProtocol() and
creates a new function CleanUpShellEnvironment() which calls
CleanUpShellProtocol(), then unregisters the hotkey callback.
But the commit forgot to change the Shell.c to call
CleanUpShellEnvironment() which causes the hotkey callback is
not unregistered while the callback function doesn't exist
when Shell exits.
This causes system hang when pressing CTRL+C after exiting shell.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Old implementation depends on UefiHandleParsingLib and uses
incorrect Index to get handle type.
The simplest ConnectAll() implementation can be just to
locate all handles and call BS.ConnectController() for each
of them recursively. BS.ConnectController() does nothing
to the image handle. Such implementation is borrowed from
BDS core implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Run 'echo -t' without the patch will get the result:
echo: Unknown flag - '-t'
The expected result is to display '-t' literally.
This patch adds special handle for 'echo'. 'echo' will not use the
general parameter parsing library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
And add Shell prefix to the two library APIs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Follow the Shell Spec, when the interface name is Specified,
we need to refresh the Ipv6 configuration.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
This reverts commit ee60bd2b6a and
e36ed7a84b.
The two commits enhanced 'edit' to support text selection through
mouse. But the code introduced some bugs resulting the text
selection behavior is not very usable and potentially hang in
certain platforms.
So I'd like to revert them firstly. If there is strong
requirement for the text selection through mouse in 'edit'
I will refine and re-add the code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jarben.carsey@intel.com>
When we have intermittent loss of packets, ping command doesnt
return to Shell prompt. It keeps looping in the while (Status
==EFI_NOT_READY) since Private->RxCount will never reach
Private->SendNum. Addresses the issue with the use of a new varibale
in the PRIVATE structure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
when we use the ping6 command without configuring the network
interface, it should give correct prompt to users.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
When ASSERT_EFI_ERROR() is compiled out, dependent on build flags, only
the status checking should be removed; the function calls should stay.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Shumin Qiu <shumin.qiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The patch fixed a bug in UefiHandleParsingLib to show handle's loaded
image device path.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
It is the follow up of 3ab41b7a32
to replace UnicodeStrToAsciiStr/AsciiStrToUnicodeStr with
UnicodeStrToAsciiStrS/AsciiStrToUnicodeStrS.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The output of "dh <handle>" originally is like below:
12C: USBIO DevicePath(x0)/Pci(0x14,0x0)/USB(0x6,0x0))
The device path part is very confusing. Use ".." in front of the
partially displayed device path is better and it also aligns to
the example output in Shell spec.
12C: USBIO DevicePath(..)/Pci(0x14,0x0)/USB(0x6,0x0))
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1) RunSplitCommand() allocates the initial SplitStdOut via
CreateFileInterfaceMem(). Free SplitStdIn after the swap to fix
the memory leak.
2) In RunSplitCommand(), SplitStdOut is checked for equality with
StdIn. This cannot happen due to the if-check within the swap.
Hence remove it.
3) UefiMain() doesn't free SplitList. Delete all list entries and
reinitialize the list when in DEBUG. This does not include the
CreateFileInterfaceMem()-allocated SplitStd mentioned in 1), so
keep the ASSERT() until resolved.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
This patch fixes the ARM build failure introduced by
2be45bfe27.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Until now the 'addp' command has been handled in the same way as 'add'.
Just copy the DevicePath starting from the Hard Drive node when 'addp'
is used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
The EFI_UNICODE_COLLATION_PROTOCOL can have two different GUIDs.
Look for both to support more UEFI implementations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
TFTP block size has a big impact on the transmit performance, this patch is to
add new argument [-s <block size>] for shell "tftp" command to configure the
block size for file download.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
If 'ReadKeyStroke' function return EFI_NOT_READY then skip it.
If the return value is EFI_DEVICE_ERROR clean the currentString buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pedroa Liu <pedroa.liu@insyde.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
When executing shell dp command, there is an error message "Timer library
instance error!"
The error message "Timer library instance error!" should be for the case about
duration > EndTimeStamp if CountUp or duration > StartTimeStamp if CountDown.
But if the EndTimeStamp of an entry is not added, it should not the case to catch.
This change fixes the error message "Timer library instance error!" from the
"BdsAttempt" entry which is logged when trying to boot a boot option.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
v2:
* Refine the code to make it more readable.
This patch is used to support no source IP specified case while
multiple NICs existed in the platform. The command will select the
first both connected and configured interface automatically.
Note: Source address is always required when pinging a
link-local address.
Cc: Bhupesh Sharma <bhupesh.sharma@nxp.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2:
* A. Refine the code to make it more readable.
* B. Add hint message for link local address case.
This patch is used to support no source IP specified case
while multiple NICs existed in the platform. The command
will select the first both connected and configured interface
automatically.
Note: Source address is always required when pinging a
link-local address.
Cc: David Van Arnem <dvanarnem@cmlab.biz>
Cc: Bhupesh Sharma <bhupesh.sharma@nxp.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
UEFI Shell 2.x cannot recognize whether a .EFI file is an application or
a driver. This means when we typed in a driver image in Shell command
line, Shell will load the driver image and try to run the entry point
function of the driver.
This patch check the ImageCodeType to fix the issue.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
This patch is used to update ping command options to sync
with shell2.2 Spec.
Considering the backward compatible issue, the patch keeps
‘-_s’ command option unchanged, only add the new option '-s'
and make the old option '-_s' function same as new one.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
the performance.
Currently UEFI Shell reads variable storage to get the environment
variables every time running a new command. And reading(writing)
UEFI variables is a high cost operation on most platforms. In order
to enhance the performance this patch read the variable storage once
and cache the environment variables in memory. Every further 'set'
command will save the variable not only to Shell cache, but also the
flash variable storage.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by:Ruiyu Ni <ruiyu.ni@intel.com>
For Boolean values not use explicit comparisons to TRUE or FALSE. For non-Boolean
comparisons we should use a compare operator.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The allocated memory of ParamPackage is not freed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The BuildOptions for AARCH64 in Application/Shell/Shell.inf only affect
the core Shell binary, and not the Shell component libraries which are
merged into the final Shell binary via NULL library class resolution.
This means we need to override the UEFI_APPLICATION build options in
the platform .DSC anyway, there is no point in setting these options
here as well. So remove them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Pass in GUID* for the GUID reference in a CatSPrint statement. Issue was noticed when running "dh -d -v" command on a system with a PCI NIC installed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Remove variable FStartRow that is declared, assigned but never referenced.
This fixes a warning emitted by GCC when -Wunused-but-set-variable is in
effect.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Make the USB mouse cursor move smoothly in 'edit'.
2. Make the USB mouse can drag and select text in 'edit'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch makes Shell support -nonesting invocation option. This option
specifies that EFI_SHELL_PROTOCOL.Execute API nesting of a new Shell
instance is optional and dependent on the 'nonesting' Shell environment
variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jim Dailey <Jim_Dailey@Dell.com>
Use DOS format end of line(CR, LF).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Fix SMBIOSVIEW decode of the HeaderLog fields of the PCIe
AER structure . The PCIe 2.1 Base Specification, section 7.10, lists
this as 16 bytes, or 4 DWORDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch is used to update ifconfig -r implementation
to sync with UEFI Shell 2.2.
option -r means to reconfigure all or specified interface,
and set DHCP policy. If specified interface is already set
to DHCP, then refresh the IPv4 configuration.
If the interface name is specified
with '-r', DHCP DORA process will be triggered by the policy
transition (static -> dhcp).
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
If data of any real size were to be piped from one command to another,
an inordinate amount of time could be taken up by reallocating memory
that is only 10 bytes bigger than what is currently needed. Also, this
could cause unwelcome memory fragmentation.
Added a define to control how much memory is reallocated beyond that
which is currently needed. Set it to 1K vs. the original 10 bytes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The shell uses the memory file structure to manage temporary files in
memory that support piping of output from one command into the the
input of another command. The BufferSize member is the size of the
internal buffer, not the size of the data that was written to the
file. So, it was possible to read beyond the EOF of these files as
reads used BufferSize. Now FileSize tracks the actual size of these
files (the number of bytes written, not the number of bytes available
in the buffer), and the reads use this member.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
'd6cf1af9' is associated with '3d0a49ad' commit. So, this patch is
used to respond the revert for '3d0a49ad' to adapt the Ipv4 config
policy update.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
If the BOM is stripped from StdIn, then an app that duplicates StdIn
will not be able to duplicate, say, a UCS2 file that was piped into
it (the output file it creates would not start with a BOM).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <Jaben.Carsey@intel.com>
USB mouse cursor cannot move unless the left button is down. The patch
refresh the FileBuffer of Editor every time when the 'MainEditorRefresh'
is called to fix this bug.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
UEFI Shell scandalizes the help message in spec level so that a standalone
UEFI shell application can never get "-?" switch, instead the Shell core
(interpreter) detects the "-?" and finds .MAN file for that shell
application in certain spec defined paths, then show the help extracted
from that .MAN file.
But it means distributing a UEFI shell application not only means
distributing a .EFI file but also distributing a .MAN file. If the text
formatted .MAN file is corrupted (edited by user by mistake), or is
missing (deleted by user by mistake), no help will be shown to user.
So this patch enhance the Shell to make it support finding help message
imbedded in resource section of application image.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Do NULL pointer check before the pointer is used to avoid dereferenced.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When the last line in a script file is not an empty line the Shell
will not execute the command in the last line. The patch refine the
logic in function 'ShellFileHandleReturnLine' and fix the issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
The pointer 'FileInterface->Buffer' returned from 'AllocateZeroPool' in function
'CreateFileInterfaceMem' may be NULL and will be dereferenced at the following code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
An earlier change had this function returning the type of lines that were in
the file being read (ASCII or UCS2). The way it is used, UCS2 output is
expected, even when the file being read is ASCII. This change restores that
behavior and documents it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <Jim_Dailey@Dell.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Fix various errors when piping a UNICODE or ASCII file to a simple shell application that reads standard input and writes it to standard output.
1) When the memory file is created by CreateFileInferfaceMem() to capture the pipe output, no UNICODE BOM is written to the memory file. Later, when the memory file is read by the application using ShellFileHandleReadLine(), the function indicates that the file is ASCII because there is no BOM.
2) If the file is piped as ASCII, the ASCII memory image is not correctly created by FileInterfaceMemWrite() as each ASCII character is followed by '\0' in the image (when the ASCII data is written to the memory image, the file position should only be incremented by half the buffer size).
3) ShellFileHandleReadLine() does not read ASCII files correctly (writes to Buffer need to be cast as CHAR8*).
4) FileInterfaceMemRead() and FileInterfaceMemWrite() as somewhat hard to read and difficult to debug with certain tools due to the typecasting of This. Added a local variable (MemFile) of the correct type to these functions and used it instead of This.
Enhancement: ShellFileHandleReadLine() now returns EFI_END_OF_FILE when appropriate.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Fix various errors when piping a UNICODE or ASCII file to a simple shell application that reads standard input and writes it to standard output.
1) When the memory file is created by CreateFileInferfaceMem() to capture the pipe output, no UNICODE BOM is written to the memory file. Later, when the memory file is read by the application using ShellFileHandleReadLine(), the function indicates that the file is ASCII because there is no BOM.
2) If the file is piped as ASCII, the ASCII memory image is not correctly created by FileInterfaceMemWrite() as each ASCII character is followed by '\0' in the image (when the ASCII data is written to the memory image, the file position should only be incremented by half the buffer size).
3) ShellFileHandleReadLine() does not read ASCII files correctly (writes to Buffer need to be cast as CHAR8*).
4) FileInterfaceMemRead() and FileInterfaceMemWrite() as somewhat hard to read and difficult to debug with certain tools due to the typecasting of This. Added a local variable (MemFile) of the correct type to these functions and used it instead of This.
Enhancement: ShellFileHandleReadLine() now returns EFI_END_OF_FILE when appropriate.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Refine the code to use 'sizeof(EFI_LOAD_OPTION)' as offset in buffer to get 'description' instead of using a constant number.
This change makes the code more readable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19746 6f19259b-4bc3-4df7-8a09-765794883524
The changes due to the previous patches should be reflected in a higher
minor version number.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Suggested-by: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19719 6f19259b-4bc3-4df7-8a09-765794883524
The DumpHex() function produces very friendly output (known from DMPSTORE,
for example); let's use it with "BCFG -v" as well.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19718 6f19259b-4bc3-4df7-8a09-765794883524
The UEFI Shell specification classifies shell commands into various shell
levels / profiles.
Currently the DumpHex() internal function is only used by commands that
belong to the Debug1 profile exclusively (i.e., they are not required to
be present in other than Debug1 profiles):
- SMBIOSVIEW
- PCI
- DMPSTORE
- DMEM
- DBLK
In the next patch, we'd like to call DumpHex() from BCFG as well. However,
BCFG is not only required to be present in the Debug1 profile; the
Install1 profile contains BCFG as well. For this reason, move DumpHex()
from UefiShellDebug1CommandsLib to the more generic UefiShellCommandLib,
which "Provides interface to shell internal functions for shell commands".
The matching header file is "ShellPkg/Include/Library/ShellCommandLib.h".
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19717 6f19259b-4bc3-4df7-8a09-765794883524
This is likely a copy & paste error from the preceding ShellPrintHiiEx()
function call. ShellPrintEx() takes no Language parameter, so remove the
NULL argument, which is currently misinterpreted as a format string.
This bug prevents the hexdump of optional data even when -v is passed to
BCFG, and optional data exist.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19716 6f19259b-4bc3-4df7-8a09-765794883524
In this cleaned up form of BcfgDisplayDump(), it is easier to see that the
OptionalDataOffset <= BufferSize
expression, used to report whether optional data are *absent*, is
incorrect. For any well-formed EFI_LOAD_OPTION, this inequality always
holds.
Optional data are present exactly if
OptionalDataOffset < BufferSize
therefore the absence condition is the negation of the above,
OptionalDataOffset >= BufferSize
This patch fixes the bug where BCFG always reports "Optional- N", even if
optional data exist.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19715 6f19259b-4bc3-4df7-8a09-765794883524
Star Zeng
Zhang Lubo
Dandan Bi
hegdenag
Linson Augustine
Chris Phillips
Michael Kinney
Ruiyu Ni
Chen A Chen
Gary Lin
Tapan Shah
Laszlo Ersek
Fu Siyuan
Thomas Palmer
Vladimir Olovyannikov
Cinnamon Shia
Abdul Lateef Attar
Shi, Steven
Hao Wu
Liming Gao
Mudusuru, Giri P
Subramanian, Sriram (EG Servers Platform SW)
Marvin H?user
Qiu Shumin
Pedroa Liu
Jaben Carsey
Jiaxin Wu
Samer El-Haj-Mahmoud
Ard Biesheuvel
Zhang, Lubo
Jim_Dailey@Dell.com