Introduce the new public API QemuFwCfgSkipBytes(), for advancing over
bytes in the selected firmware configuration item without transferring
data between the item and the caller.
When the DMA interface is available (the common case), the operation is
instantaneous. As a fallback, provide a loop of chunked reads into a small
stack-allocated scratch buffer.
This patch enables OvmfPkg/QemuFwCfgLib to overwrite part of a writeable
fw_cfg file, which will be particularly useful for the upcoming
QEMU_LOADER_WRITE_POINTER command in OvmfPkg/AcpiPlatformDxe.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The fw_cfg DMA interface provides a simple method to skip over bytes in an
fw_cfg blob before reading or writing more bytes.
InternalQemuFwCfgDmaBytes() can support it easily, we just have to expose
the Control parameter more flexibly than the current "Write" BOOLEAN.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
If the code eventually returns "Status" anyway, it does not make
sense to explicitely return "Status" in case of an error, too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Fifo routines from the QuemuFwCfgLib library have been ported
to the new BaseIoLibIntrinsic (IoLib class) library.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The Debug Agent in the SourceLevelDebugPkg can multiplex
both source level debug messages and console messages on
the same UART. When this is done, the Debug Agent owns
the UART device and an additional device handle with a
Serial I/O Protocol is produced with a VenHw device path
node.
In order for a platform to provide a UART based console
when the Debug Agent is using the same UART device, the
PlatformBootManagerLib must consider the SerialI/O
Protocol produces by the Debug Agent as one of the
supported consoles.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Because EFIAPI is necessary for functions declared in library class header
files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
The benefits of the DMA-like access method are (a) speed, (b) write
support in QEMU 2.9+.
(IOPort-based write support was discontinued in QEMU 2.4, and the
DMA-based one is being added to QEMU 2.9. Write support needs no separate
feature detection because writeability is governed on the level of
individual fw_cfg files -- if a file meant to be written by the firmware
exists in the directory, then it is writeable with the DMA method.)
We don't enable this feature for the SEC library instance, because:
- the SEC instance remains without clients (I've checked that it builds
though),
- in SEC, any possible fw_cfg use is expected to be small and read-only.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
InternalQemuFwCfgIsAvailable() is an API that is incorrectly exposed by
the "OvmfPkg/Include/Library/QemuFwCfgLib.h" library class header; the API
is meant to be used internally to library instances (if it's needed at
all).
In OvmfPkg, we have two lib instances (for SEC and PEI/DXE); they provide
different implementations of InternalQemuFwCfgIsAvailable(), for the
shared file "OvmfPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c". Move the API
declaration to a new internal header called "QemuFwCfgLibInternal.h", and
drop EFIAPI in the process.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Convert the remaining pieces to make the code shorter and more readable.
Cc: Justen Jordan <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: tweak subject line]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Rely on the central macro definition from "MdePkg/Include/Base.h" instead.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In one of the next patches, we'll introduce ARRAY_SIZE in
"MdePkg/Include/Base.h". In order to proceed in small steps, make the
module-local definition of ARRAY_SIZE conditional. This way the
introduction of the macro under MdePkg will silently switch this module
over (after which we can remove the module-local definition completely).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
XenConsoleSerialPortLib is a BASE type library instance, without being
restricted to UEFI client modules. (For example, the
"ArmVirtPkg/ArmVirtXen.dsc" platform builds this library instance into
"ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf", which is a SEC type
module.) For such library instances, including <Uefi/UefiBaseType.h> is
not right.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These are deprecated / disabled under the
DISABLE_NEW_DEPRECATED_INTERFACES feature test macro.
Introduce a variable called PcdStatus, and use it to assert the success of
these operations (there is no reason for them to fail here).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=166
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # RVCT
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These are deprecated / disabled under the
DISABLE_NEW_DEPRECATED_INTERFACES feature test macro.
Introduce a variable called PcdStatus, and use it to assert the success of
these operations (there is no reason for them to fail here).
Cc: Anthony PERARD <anthony.perard@citrix.com>
Cc: Gary Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=166
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Prototype of BootLogoEnableLogo will change in following patches, so
do not call BootLogoEnableLogo to avoid build failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Correct some typos (discovered with the codespell utility)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Run "unix2dos" on the affected files. "git show -b" produces no diff for
this patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Translating QEMU's virtio-block OpenFirmware device path to a UEFI device
path prefix was one of the earliest case handled in QemuBootOrderLib. At
that time, I terminated the translation output (the UEFI devpath prefix)
with a "/HD(" suffix.
The intent was for the translation to prefix-match only boot options with
HD() device path nodes in them, that is, no auto-generated "device level"
boot options. This was motivated by prioritizing specific boot options
created by OS installers over auto-generated "device level" options.
However, practice has shown that:
- OS installers place their installed boot options first in the boot order
anyway,
- other device types (SATA disks, virtio-scsi disks), where "/HD(" is not
appended, work just fine,
- requiring "/HD(" actually causes problems: after the OS-installed
specific boot option has been lost (or purposely removed), the
auto-generated "device level" boot option does the right thing (see the
Default Boot Behavior under
<http://blog.uncooperative.org/blog/2014/02/06/the-efi-system-partition/>).
The "/HD(" requirement causes such boot options to be dropped, which
prevents "fallback.efi" from running.
Relax the matching by removing the "/HD(" suffix from the translated
prefix.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: e06a4cd134
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1373812
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This will add virtio-gpu-pci devices to ConOut automatically.
For further benefit, the change also allows OVMF to use the legacy-free /
secondary VGA adapter (added in QEMU commit 63e3e24d, "vga: add secondary
stdvga variant") as console.
ArmVirtPkg's PlatformBootManagerLib already filters with IS_PCI_DISPLAY();
see IsPciDisplay().
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Originally-suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When compiling "OvmfPkg\Library\PciHostBridgeLib\XenSupport.c" for IA32,
the VS2015x86 compiler emits the following:
> XenSupport.c(41): error C2220: warning treated as error - no 'object'
> file generated
> XenSupport.c(41): warning C4244: 'function': conversion from 'UINT64' to
> 'UINTN', possible loss of data
> XenSupport.c(48): warning C4244: 'function': conversion from 'UINT64' to
> 'UINTN', possible loss of data
> XenSupport.c(49): warning C4244: 'function': conversion from 'UINT64' to
> 'UINTN', possible loss of data
> XenSupport.c(50): warning C4244: 'function': conversion from 'UINT64' to
> 'UINTN', possible loss of data
> XenSupport.c(222): warning C4244: 'function': conversion from 'UINT64'
> to 'UINTN', possible loss of data
> XenSupport.c(241): warning C4244: 'function': conversion from 'UINT64'
> to 'UINTN', possible loss of data
PciLib functions take UINTN addresses that were encoded with the
PCI_LIB_ADDRESS() macro. We carry addresses from the macro invocations to
the function calls in two UINT64 variables however. This loses no data,
but it alerts VS2015x86. Change the variable types to UINTN.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removes any boot options that point to binaries built into the firmware
and have become stale due to any of the following:
- DXEFV's base address or size changed (historical),
- DXEFV's FvNameGuid changed,
- the FILE_GUID of the pointed-to binary changed,
- the referenced binary is no longer built into the firmware.
For example, multiple such "EFI Internal Shell" boot options can coexist.
They technically differ from each other, but may not describe any built-in
shell binary exactly. Such options can accumulate in a varstore over time,
and while they remain generally bootable (thanks to the efforts of
BmGetFileBufferByFvFilePath()), they look bad.
Filter out any stale options.
This functionality is not added to QemuBootOrderLib, because it is
independent from QEMU and fw_cfg.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When OVMF tried to load the file-based NvVars, it checked all the PCI
instances and connected the drivers to the mass storage device. However,
Xen registered its PCI device with a special class id (0xFF80), so
ConnectRecursivelyIfPciMassStorage() couldn't recognize it and skipped the
driver connecting for Xen PCI devices. In the end, the Xen block device
wasn't initialized until EfiBootManagerConnectAll() was called, and it's
already too late to load NvVars.
This commit connects the Xen drivers in ConnectRecursivelyIfPciMassStorage()
so that Xen can use the file-based NvVars.
v3:
* Introduce XenDetected() to cache the result of Xen detection instead
of relying on PcdPciDisableBusEnumeration.
v2:
* Cosmetic changes
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
OVMF (unlike ArmVirtPkg) has traditionally cleared the screen after
connecting devices. This is not really necessary, and keeping the logo up
while the progress bar is advancing at the bottom looks great. So don't
clear the screen.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
OVMF's Platform BDS used to have a nice progress bar (with
IntelFrameworkModulePkg BDS). We can restore it by copying the
PlatformBootManagerWaitCallback() function verbatim from
Nt32Pkg/Library/PlatformBootManagerLib/PlatformBootManager.c
It can be tested by passing the following option to QEMU (5 seconds):
-boot menu=on,splash-time=5000
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the course of porting OvmfPkg to the MdeModulePkg BDS, commit
817fb3ac2a
OvmfPkg/PlatformBootManagerLib: Add EnableQuietBoot & DisableQuietBoot
open-coded the EnableQuietBoot() function (and its dependencies / friends)
from IntelFrameworkModulePkg BDS.
This code duplication can be avoided; the functionality is available from
the following three libraries in MdeModulePkg:
- BootLogoLib: provides the BootLogoEnableLogo() function. It does not
provide the internal ConvertBmpToGopBlt() function -- that one is
delegated to ImageDecoderLib (function DecodeImage()).
- ImageDecoderLib: a general library that registers decoder plugins for
specific image formats, and provides the generic DecodeImage() on top.
- BmpImageDecoderLib: one of said decoder plugins, for handling BMP images
(which is the format of our logo).
In this patch, we revert 817fb3ac2a, and atomically incorporate the
above libraries. This is inspired by Nt32Pkg commit 859e75c4fc42:
Nt32Pkg: Use BootLogoLib for logo and progress bar drawing.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When OVMF tried to restore the variables from the file-based NvVars, it
failed to set the read-only variable and aborted the restoration with
this message:
Variable Check ReadOnly variable fail Write Protected - 04B37FE8-F6AE-480B-BDD5-37D98C5E89AA:VarErrorFlag
Since it's a read-only variable maintained by the firmware, it's
pointless to restore the previous value, so the check can be
relaxed to allow EFI_WRITE_PROTECTED returned from SetVariable.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
"SerializeVariablesLib.h" is pure LF, while "SerializeVariablesLib.c" is
mixed (its only CRLF terminators are from commit e678f9db89). Convert
them both with "unix2dos".
"git show -b" produces no code hunks for this patch. Due to its simple and
mechanic nature (and because it blocks the application of another patch),
it's being committed without review.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
This completes the transition to the new BDS.
The FILE_GUID in "QemuBootOrderLib.inf" is intentionally not changed.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
With OvmfPkg's original QemuBootOrderLib (and USE_OLD_BDS) gone, we no
longer need the BootOptionList parameter in the SetBootOrderFromQemu()
prototype. Update the library class header file (including the function's
documentation), and adapt the library instance and the call sites.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This library instance is no longer referenced.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This library instance is no longer referenced.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In this patch, the AcpiTimerLib instances, ResetSystemLib, and PlatformPei
are modified together in order to keep VMs functional across a bisection:
they all must agree on the PMBA value used.
ResetSystemLib must not use dynamic PCDs. With SOURCE_DEBUG_ENABLE, it
gets linked into the debug agent, therefore the same restrictions apply to
it as to BaseRomAcpiTimerLib. Luckily, AcpiPmControl() is only used for
powering off the virtual machine, thus the extra cost of a PCI config
space read, compared to a PcdGet16(), should be negligible.
This is the patch that moves the PMBA to IO port 0x0600 on Q35 in
practice.
The ResetSystemLib change is easiest to verify with the "reset -s" command
in the UEFI shell (which goes through gRT->ResetSystem() and, in OVMF,
PcAtChipsetPkg/KbcResetDxe).
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
We already have the identical purpose (but different value) macro for
ICH9, namely ICH9_PMBASE_MASK in
"OvmfPkg/Include/IndustryStandard/Q35MchIch9.h".
Also, stop bit-negating signed integer constants.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
In the next patches, we'll differentiate the PMBA IO port address that we
program on PIIX4 vs. Q35.
Normally we'd just turn PcdAcpiPmBaseAddress into a dynamic PCD. However,
because we need this value in BaseRomAcpiTimerLib too (which cannot access
RAM and dynamic PCDs), it must remain a build time constant. We will
introduce its Q35 counterpart later.
As first step, replace the PCD with a new macro in "OvmfPlatforms.h";
Jordan prefers the latter to fixed PCDs in this instance.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
We should store the right value to the PMBA (if the PMBA needs
initialization) before setting mAcpiTimerIoAddr from the PMBA.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: f122712b42
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
We currently register the shell before creating the boot options for
the block devices and the network devices, so the boot manager boots
into the internal shell if the user doesn't specify the boot order.
However, Xen doesn't support fw_cfg, so there is no way to change the
boot order with the external command, and the firmware will always
boot into the internal shell if the user doesn't interfere the boot
process.
This patch postpones the shell registration after MdeModulePkg/BDS
creates all the boot options for the block and network devices, so
that firmware will try to boot the block/network devices first.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
On the Q35 machine type of QEMU, there is no port multiplier connected to
the on-board SATA controller. Therefore the AtaAtapiPassThru driver update
for Mantis ticket 1353 <https://mantis.uefi.org/mantis/view.php?id=1353>
changes the middle number (the Port Multiplier Port Number) in the Sata()
device path nodes from 0x0 to 0xFFFF.
Adapt the translation from OpenFirmware in QemuBootOrderLib.
(Note: QemuBootOrderLib is deprecated at this point (see USE_OLD_BDS in
the DSC files), but until we remove it, it should be kept in sync with
QemuNewBootOrderLib.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
On the Q35 machine type of QEMU, there is no port multiplier connected to
the on-board SATA controller. Therefore the AtaAtapiPassThru driver update
for Mantis ticket 1353 <https://mantis.uefi.org/mantis/view.php?id=1353>
changes the middle number (the Port Multiplier Port Number) in the Sata()
device path nodes from 0x0 to 0xFFFF.
Adapt the translation from OpenFirmware in QemuNewBootOrderLib.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The patch re-factors the code without functionality impact.
Next patch will add code to support OVMF above Xen.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In order to match the previous commit, Base must be strictly larger than
Limit if some type of aperture is not available on a PCI root bridge.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Width and Height assignment suppresses an invalid gcc-4.8 warning
on Ia32.
These warnings look unjustified to me. Namely, near the beginning of
the function, there is a while(1) loop. In that loop,
ConvertBmpToGopBlt() is called unconditionally. If the call fails,
the rest of the loop body is not reached (where the Height and Width
variables are used -- the compiler warns about their use in the
switch statement). If the call succeeds, then the variables are set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
EnableQuietBoot and DisableQuietBoot are copied from
IntelFrameworkModulePkg/Library/GenericBdsLib/BdsConsole.c.
Because these two functions are not in UefiBootManagerLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Laszlo Ersek
Thomas Huth
Leo Duran
Michael Kinney
Anthony PERARD
Ruiyu Ni
Gary Lin