Verification microcode signature is one enhancement and not one requirement from
IA32 SDM. This update is just to dump debug message instead of ASSERT() if the
updated microcode signature does not match the loaded microcode signature.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
If ApLoopMode is set to ApInMwaitLoop, AP will be placed into C-State by mwait
instruction. BSP will wakeup AP by write start-up signal in monitor address.
However, AP maybe waken by SMI/NMI/MCE and other condition. On this case, AP
will check if BSP wants to wakeup itself really. If not, AP will continue to
execute mwait to C-State.
One potential issue: BSP may not recognize AP was wakeup from C-State by other
event and BSP still writes start-up signal to wakeup AP. But AP does not aware
it and still execute mwait instruction to C-State. So, AP cannot be wakeup on
this case.
This fix is let AP to clear start-up signal when it really is wakeup to execute
AP function. And BSP will write start-up signal till AP clears it.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
If ApLoopMode is ApInHltLoop, BSP will send INIT-SIPI-SIPI to wake up APs.
If ApLoopMode is ApInMwaitLoop or ApInRunLoop, BSP will write one semaphore to
wake up APs.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19346 6f19259b-4bc3-4df7-8a09-765794883524
After AP function is executed, we will place AP in proper loop mode. Because AP
maybe waken up by SMI or other reasons. We need to read signature in monitor
buffer to check if APs is waken up by BSP. If it is not waken up by BSP, we will
continue to place them into proper loop mode.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19345 6f19259b-4bc3-4df7-8a09-765794883524
Get AP loop mode to prepare for the monitor buffer required for ApInMwaitLoop
and ApInRunLoop.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19344 6f19259b-4bc3-4df7-8a09-765794883524
Add GetApLoopMode() that will get PCD PcdCpuApLoopMode firstly. If it is
ApInMwaitLoop, we will check if MONITOR/MWAIT feature supported by CPUID. If
MONITOR/MWAIT feature is not supported, force AP loop mode to ApInHltLoop.
GetApLoopMode() also return the largest line size required.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19343 6f19259b-4bc3-4df7-8a09-765794883524
PeiStartupAllAPs()/PeiStartupThisAP() will send INIT-SIPI-SIPI to wakeup APs to
execute AP function. However, some registers will be reset after APs received
INIT IPI. We need to restore some registers (For example, CRx/DRx) manually
after APs wakeup.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19089 6f19259b-4bc3-4df7-8a09-765794883524
Save BSP's volatile register and sync CRx register to APs when AP 1st wake up.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19088 6f19259b-4bc3-4df7-8a09-765794883524
Add CPU_VOLATILE_REGISTERS definitions for CRx and DRx required to be restored
after APs received INIT IPI.
Add worker functions SaveVolatileRegisters()/RestoreVolatileRegisters() used to
save/restore CRx and DRx. It also check if Debugging Extensions supported or
not.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19086 6f19259b-4bc3-4df7-8a09-765794883524
Current implementation only exchanges the APIC ID and BIST, this updating is to
exchange all CPU data.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19085 6f19259b-4bc3-4df7-8a09-765794883524
If x2APIC flag is set, enable x2APIC mode on all APs and BSP. Before we wakeup
APs to enable x2APIC mode, we should wait all APs have finished initialization.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18934 6f19259b-4bc3-4df7-8a09-765794883524
If there are any logical processor reporting an APIC ID of 255 or greater, set
X2ApicEnable flag.
GetInitialApicId() will return x2APIC ID if CPUID leaf B supported.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18933 6f19259b-4bc3-4df7-8a09-765794883524
Only perform AP detection if PcdCpuMaxLogicalProcessorNumber > 1
Only free AP related structures of they were allocated
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18629 6f19259b-4bc3-4df7-8a09-765794883524
CpuData buffer should be located in allocated buffer instead of at end of
WakeupBuffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18550 6f19259b-4bc3-4df7-8a09-765794883524
Add CpuMpEndOfPeiCallback () to restore wakeup buffer data on S3 path and flag
flag wakeup buffer to be un-used type on normal boot path. Set one EndOfPei
flag save/restore wakeup buffer when wakeup APs every time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18014 6f19259b-4bc3-4df7-8a09-765794883524
Add AsmHltLoop () in assembly code, it will not be copied into AP wakeup
buffer and invoked at end of ApCFunction (). To make sure AP work in case
AP wakeup buffer is restored to original data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18013 6f19259b-4bc3-4df7-8a09-765794883524
Get CPU BIST information from SEC Platform Information(2) PPIs and update them
accordingly. Install(Reinstall) SEC Platform Information2 PPI to published the
new CPU BIST.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18004 6f19259b-4bc3-4df7-8a09-765794883524
Add DetectMicrocode() to load microcode on BSP and APs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18002 6f19259b-4bc3-4df7-8a09-765794883524
BSP will send broadcast INIT Startup IPI to all APs and collect APs count and
BIST information.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17997 6f19259b-4bc3-4df7-8a09-765794883524
Get AP wakeup buffer and copy AP reset code into it. Allocate APs' stack and CPU
MP data buffer. Fill CPU MP data fields accordingly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17995 6f19259b-4bc3-4df7-8a09-765794883524
Search memory resource HOB list to find one available system memory under 1MB
for AP reset code and exchange information between BSP and APs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17989 6f19259b-4bc3-4df7-8a09-765794883524
This module is to provide MP PPI services defined in PI 1.4.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17987 6f19259b-4bc3-4df7-8a09-765794883524
Jeff Fan
Laszlo Ersek
Michael Kinney