In the ArmPkg version of PlatformBootManagerLib, we construct a
serial device path based on the default settings for baud rate,
parity and the number of stop bits, to ensure that a serial console
is available even on the very first boot.
This assumes that PcdUartDefaultParity or PcdUartDefaultStopBits are
not set to '0', meaning 'the default', as there is no default for
these when constructing a device path.
So add a couple of STATIC_ASSERT()s to make sure that we catch this
condition, since it otherwise ignores the bogus device path silently,
which is rather tedious to debug,.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Replace the runtime ASSERT with the build time STATIC_ASSERT on the
check that ensures that the terminal type we use for the serial
console matches the one we explicitly add to the ConIn/ConOut/StdErr
variables.
This helps catch serial console issues early, even in RELEASE builds,
reducing the risk of ending up with no console at all, which can be
tricky to debug on bare metal.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Third party driver images loaded from Option ROM get queued
for execution after EndOfDxe. These queued images need to be
dispatched from the PlatformBootManagerLib.
Since the queued images were not dispatched, the PCI Option
ROM drivers were not getting loaded on Juno. Therefore,
add call to EfiBootManagerDispatchDeferredImages() for
dispatching deferred images from PlatformBootManagerLib.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
SERIAL_DXE_FILE_GUID is now defined in MdeModulePkg as
EDKII_SERIAL_PORT_LIB_VENDOR_GUID, simply use it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190606131459.1464-4-anthony.perard@citrix.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
ARM platforms have no restriction on when a system firmware update
capsule can be applied, and so it is not necessary to call
ProcessCapsules() twice. So let's drop the first invocation that
occurs before EndOfDxe, and rewrite the second call so that all
capsule updates will be applied when the console is up and able to
provide progress feedback.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add a missing newline to the version string output that is displayed
on the serial console, or the next line will be appended to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
If gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString is set to
a non-empty string, print it to the console at boot. Note that this
is independent of DEBUG/RELEASE or graphical vs serial console,
although we do attempt to stay clear of the logo and progress bar
in graphical mode, by printing it top center.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ESRT hook call that I just added invokes the protocol before
retrieving a pointer to it, which interestingly enough did not
result in any crashes, nor did it get picked up by GCC. Clang did
notice, though, so let's fix it right away.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The ESRT management protocol needs to be invoked at the appropriate times
to get the ESRT config table to be published when the ReadyToBoot event
is signalled. So add this handling to the default ArmPkg implementation
of PlatformBootManagerLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Process any capsule HOBs that were left for us by CapsulePei. This
involves calling ProcessCapsules() twice, as explained in the comment
in DxeCapsuleLibFmp [sic].
1) The first call must be before EndOfDxe. The system capsules is processed.
If device capsule FMP protocols are exposted at this time and device FMP
capsule has zero EmbeddedDriverCount, the device capsules are processed.
Each individual capsule result is recorded in capsule record variable.
System may reset in this function, if reset is required by capsule and
all capsules are processed.
If not all capsules are processed, reset will be defered to second call.
2) The second call must be after EndOfDxe and after ConnectAll, so that all
device capsule FMP protocols are exposed.
The system capsules are skipped. If the device capsules are NOT processed
in first call, they are processed here.
Each individual capsule result is recorded in capsule record variable.
System may reset in this function, if reset is required by capsule
processed in first call and second call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Replace the duplicated and outdated code in QuietBoot.c with a reference
to BootLogoLib, which provides the same functionality. This also allows
us to drop all references to IntelFrameworkModulePkg in this module.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Instead of indirecting the reference to the Shell binary via a PCD
that is defined in IntelFrameworkModulePkg, and which invariably
gets set to the same value by all users of this library, refer to
the UEFI Shell application by its declared symbolic GUID.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This implements the platform glue for the new generic BDS implementation.
It is based on the ArmVirtQemu version, with the QEMU references removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Ard Biesheuvel
Sami Mujawar
Antoine Cœur
Anthony PERARD
Michael D Kinney
Haojian Zhuang
Ruiyu Ni
Ard Biesheuvel