According to the PI spec, Volume 3,
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.EraseBlocks():
> The variable argument list is a list of tuples. Each tuple describes a
> range of LBAs to erase and consists of the following:
> * An EFI_LBA that indicates the starting LBA
> * A UINTN that indicates the number of blocks to erase
(NB, in edk2, EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL is a typedef to
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.)
In this driver, the NumOfLba local variable is defined with type UINTN,
but the TYPE argument passed to VA_ARG() is UINT32. Fix the mismatch.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reported-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
According to the PI spec, Volume 3,
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.EraseBlocks():
> The variable argument list is a list of tuples. Each tuple describes a
> range of LBAs to erase and consists of the following:
> * An EFI_LBA that indicates the starting LBA
> * A UINTN that indicates the number of blocks to erase
(NB, in edk2, EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL is a typedef to
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.)
In this driver, the NumOfLba local variable is defined with type UINTN,
but the TYPE argument passed to VA_ARG() is UINT32. Fix the mismatch.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the previous patch we had to add two explicit Null resolutions, but
here we can remove five PeiPcdLib ones, after setting the default to it.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Currently the default (module type independent) PcdLib resolution is to
BasePcdLibNull.inf, which is inherited by all PEIMs. In the next patch,
we'll flip the PEIM default resolution to PeiPcdLib.inf, but in order to
keep that patch both correct and simple to review, we should spell out the
Null resolution for those two PEIMs (ReportStatusCodeRouterPei and
StatusCodeHandlerPei) that are now the only ones that don't specify an
explicit resolution.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
For the emulated variable store, PlatformPei allocates reserved memory (as
early as possible, so that the address remains the same during reboot),
and PcdEmuVariableNvStoreReserved carries the address to
EmuVariableFvbRuntimeDxe.
However, EmuVariableFvbRuntimeDxe is excluded from the SMM_REQUIRE build,
and then noone consumes PcdEmuVariableNvStoreReserved. Don't waste
reserved memory whenever that's the case.
(Even a dynamic default for PcdEmuVariableNvStoreReserved would be
unnecessary; but that way the PcdSet64S() call in the
ReserveEmuVariableNvStore() function doesn't compile.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
"MdeModulePkg/MdeModulePkg.dec" declares PcdVariableStoreSize like this:
> The size of volatile buffer. This buffer is used to store VOLATILE
> attribute variables.
There is no inherent reason why the size of the volatile variable store
should match the same of the non-volatile variable store. Indeed flash
variables in the 4MB build work fine without this equality.
However, OvmfPkg/EmuVariableFvbRuntimeDxe uses PcdVariableStoreSize to
initialize the non-volatile VARIABLE_STORE_HEADER too. (Presumably based
on the fact that ultimately that storage will not be permanent.) When
using EmuVariableFvbRuntimeDxe in the 4MB build, the mismatch between the
two mentioned PCDs (which is apparent through EmuVariableFvbRuntimeDxe's
VARIABLE_STORE_HEADER) triggers an assertion in the variable driver:
> ASSERT MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.c(3772):
> mNvVariableCache->Size == VariableStoreLength
Bringing PcdVariableStoreSize in sync with PcdFlashNvStorageVariableSize
fixes this. It also happens to ensure a volatile store size in the 4MB
build that equals the non-volatile store size, which likely doesn't hurt
for symmetry.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: b24fca0575
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This PCD is no longer used.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In commit b24fca0575 ("OvmfPkg: introduce 4MB flash image (mainly) for
Windows HCK", 2017-04-29), I changed PcdFlashNvStorageFtwSpareSize to
264KB, in the then-new default 4MB build.
While PcdFlashNvStorageFtwSpareSize remains exactly half of the entire
non-volatile store (which is 528KB), 264KB isn't itself a power of two.
This triggers an assertion failure in AllocateAlignedRuntimePages() when
PlatformPei calls it from the ReserveEmuVariableNvStore() function,
passing PcdFlashNvStorageFtwSpareSize as the Alignment parameter:
> ASSERT MdePkg/Library/PeiMemoryAllocationLib/MemoryAllocationLib.c(196):
> (Alignment & (Alignment - 1)) == 0
Round up the alignment to the next power of two if necessary.
Fixes: b24fca0575
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This reverts commit bba8dfbec3.
The 264KB size introduced for the NV spare area in commit b24fca0575
("OvmfPkg: introduce 4MB flash image (mainly) for Windows HCK",
2017-04-29) breaks the "-bios" (emulated varstore) use case. Until we sort
that out, revert the default build to the 2MB image.
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The previously default 2MB can be explicitly selected with
-D FD_SIZE_2MB
or
-D FD_SIZE_IN_KB=2048
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The "ConfirmSetOfLargeVariable" test case of the Secure Boot Logo Test
("Microsoft.UefiSecureBootLogo.Tests") suite in the Microsoft Hardware
Certification Kit sets a 32 KB large non-authenticated variable.
In the FD_SIZE_4MB build, our live varstore is now 256 KB big, so we can
accommodate this. Set both PcdMaxVariableSize and PcdMaxAuthVariableSize
to 0x8400 -- beyond DataSize=0x8000 from the HCK test, we need some room
for the variable name and attributes as well.
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The "Confirm64KilobytesOfUnauthenticatedVariableStorage" test case of the
Secure Boot Logo Test ("Microsoft.UefiSecureBootLogo.Tests") suite in the
Microsoft Hardware Certification Kit expects to be able to populate the
variable store up to roughly 64 KB, with a series of 1 KB sized,
unauthenticated variables. OVMF's current live varstore area is too small
for this: 56 KB.
Introduce the FD_SIZE_4MB build macro (equivalently, FD_SIZE_IN_KB=4096),
which
- enlarges the full flash image to 4MB -- QEMU supports up to 8MB, see
FLASH_MAP_BASE_MIN in "hw/i386/pc_sysfw.c" --,
- inside that, grows the varstore area / pflash chip to 528 KB, and within
it, the live area from 56 KB to 256 KB.
Importantly, a firmware binary built with -D FD_SIZE_4MB will *not* be
compatible with a variable store that originates from a variable store
template built *without* -D FD_SIZE_4MB. This is the reason for the large
increase, as every such change breaks compatibility between a new firmware
binary and old varstore files.
Enlarging the varstore does not impact the performance of normal
operations, as we keep the varstore block size 4KB. The performance of
reclaim is affected, but that is expected (since reclaim has to rework the
full live area). And, reclaim occurs proportionally less frequently.
While at it, the FVMAIN_COMPACT volume (with the compressed FFS file in
it) is also enlarged significantly, so that we have plenty of room for
future DXEFV (and perhaps PEIFV) increments -- DXEFV has been growing
steadily, and that increase shows through compression too. Right now the
PEIFV and DXEFV volumes need no resizing.
Here's a summary:
Description Compression type Size [KB]
------------------------- ----------------- ----------------------
Non-volatile data storage open-coded binary 128 -> 528 ( +400)
data
Variable store 56 -> 256 ( +200)
Event log 4 -> 4 ( +0)
Working block 4 -> 4 ( +0)
Spare area 64 -> 264 ( +200)
FVMAIN_COMPACT uncompressed 1712 -> 3360 (+1648)
FV FFS file LZMA compressed
PEIFV uncompressed 896 -> 896 ( +0)
individual PEI uncompressed
modules
DXEFV uncompressed 10240 -> 10240 ( +0)
individual DXE uncompressed
modules
SECFV uncompressed 208 -> 208 ( +0)
SEC driver
reset vector code
For now, the 2MB flash image remains the default.
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
FD_SIZE_xMB defines have existed for flash size selection. They can be
passed as "-D FD_SIZE_xMB" on the command line. Passing multiple of them
at the same time has never been supported; earlier settings on the command
line cannot be overridden.
Introduce the integer valued FD_SIZE_IN_KB macro, which provides the
following improvements:
- several instances of it are permitted on the command line, with the last
one taking effect,
- conditional statements in the DSC and FDF files need only check a single
macro, and multiple values can be checked in a single !if with the ||
operator,
- nested !ifdef / !else ladders can be replaced with flat equality tests,
- in the future, flash sizes can be expressed with a finer than MB
granularity, if necessary.
For now, we're going to preserve the FD_SIZE_xMB defines as convenience
wrappers for FD_SIZE_IN_KB.
FD_SIZE_IN_KB is being added to the DSC files because this way we can
depend on it in both the DSC and FDF files.
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In addition to the QXL, Cirrus, etc. VGA adapters, Qemu also implements
a basic version of VMWare's SVGA display device. Drivers for this
device exist for some guest OSes which do not support Qemu's other
display adapters, so supporting it in OVMF is useful in conjunction
with those OSes.
This change adds support for the SVGA device's framebuffer to
QemuVideoDxe's graphics output protocol implementation, based on
VMWare's documentation. The most basic initialisation, framebuffer
layout query, and mode setting operations are implemented.
The device relies on port-based 32-bit I/O, unfortunately on misaligned
addresses. This limits the driver's support to the x86 family of
platforms.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. (The register value port has an offset of 1 and requires
32 bit wide read/write access.)
The EFI_PCI_IO_PROTOCOL's Io.Read/Io.Write functions do not support
such unaligned I/O.
Before a driver for this device can be added to QemuVideoDxe, helper
functions for unaligned I/O are therefore required. This adds the
functions UnalignedIoWrite32 and UnalignedIoRead32, based on IoLib's
IoWrite32 and IoRead32, for the Ia32 and X64 architectures. Port I/O
requires inline assembly, so implementations are provided for the GCC,
ICC, and Microsoft compiler families. Such I/O is not possible on other
architectures, a dummy (ASSERT()ing) implementation is therefore
provided to satisfy the linker.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This adds a header file defining symbolic constants for the VMWare SVGA
virtual display device in preparation for supporting it in
QemuVideoDxe.
It is mostly an extract of the file lib/vmware/svga_reg.h from commit
329dd537456f93a806841ec8a8213aed11395def of VMWare's vmware-svga
repository at git://git.code.sf.net/p/vmware-svga/git (See also
http://vmware-svga.sourceforge.net/ )
Only the bare essentials necessary for initialisation, modesetting and
framebuffer access have been kept from the original file; macro names
have been prefixed with VMWARE_SVGA_ instead of SVGA2_, and the enum
definition has been adapted to comply with EDK2 naming conventions.
The original file was released by VMWare under the MIT license, this
has been retained.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
ACPI tables may contain multiple fields which point to the same
destination table. For example, in some revisions, the FADT contains
both DSDT and X_DSDT fields, and they may both point to the DSDT.
Previously, if Qemu created QEMU_LOADER_ADD_POINTER linker commands for
such instances, the linking process would attempt to install the same
pointed-to table repeatedly. For tables of which there must only be one
instance, the call to AcpiProtocol->InstallAcpiTable() would fail during
the second linker command pointing to the same table, thus entirely
aborting the ACPI table linking process. In the case of tables of which
there may be multiple instances, the table would end up duplicated.
This change adds a memoisation data structure which tracks the table
pointers that have already been processed; even if the same pointer is
encountered multiple times, it is only processed once.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: DSDT<->XSDT typo, debug msg, and coding style fixups]
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=368
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Since qemu v2.7.0, the pkgversion appears to have a bug:
$ ./configure --target-list=x86_64-softmmu --with-pkgversion=foo
Results in this output:
$ x86_64-softmmu/qemu-system-x86_64 -version
QEMU emulator version 2.8.90(foo)
Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers
This appears to have been introduced in:
67a1de0d19 Makefile: Derive "PKGVERSION" from "git describe" by default
The previous commit (077de81a4c) produces this output:
$ x86_64-softmmu/qemu-system-x86_64 -version
QEMU emulator version 2.6.50 (foo), Copyright (c) 2003-2008 Fabrice Bellard
Now the OvmfPkg/build.sh script uses grep with '-o' to return only the
matched text.
grep -E is also used with a simple regex to extract only the digits of
the version.
qemu-bug: https://bugs.launchpad.net/bugs/1673373
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Drop the explicit S3SaveState protocol and opcode management; instead,
create ACPI S3 Boot Script opcodes for the WRITE_POINTER commands with
QemuFwCfgS3Lib functions.
In this case, we have a dynamically allocated Context structure, hence the
patch demonstrates how the FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION takes
ownership of Context.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We cannot entirely eliminate the manual boot script building in this
driver, as it also programs lower-level chipset registers (SMI_EN,
GEN_PMCON_1) at S3 resume, not just registers exposed via fw_cfg.
We can nonetheless replace the manually built opcodes for the latter class
of registers with QemuFwCfgS3Lib function calls. We preserve the ordering
between the two sets of registers (low-level chipset first, fw_cfg
second).
This patch demonstrates that manual handling of S3SaveState protocol
installation can be combined with QemuFwCfgS3Lib, even without upsetting
the original order between boot script fragments. An S3SaveState notify
function running at TPL_CALLBACK can safely queue another S3SaveState
notify function at TPL_CALLBACK with QemuFwCfgS3CallWhenBootScriptReady().
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the DXE fw_cfg instance:
- QemuFwCfgS3Enabled() queries S3 enablement via fw_cfg. This behavior is
shared with the PEI fw_cfg instance, and the DXE fw_cfg instance already
pulls in the function from "QemuFwCfgS3PeiDxe.c".
- If QemuFwCfgS3Enabled() returns TRUE, the client module is permitted to
call QemuFwCfgS3CallWhenBootScriptReady().
We provide a fully functional implementation for
QemuFwCfgS3CallWhenBootScriptReady(). A protocol notify is installed at
TPL_CALLBACK for EFI_S3_SAVE_STATE_PROTOCOL. If / once the protocol is
available, the client module's Callback() function is called, which is
expected to produce ACPI S3 Boot Script opcodes using the helper
functions listed below. In QemuFwCfgS3CallWhenBootScriptReady(), we also
allocate a reserved memory buffer, sized & typed by the client module,
for the opcodes and (internally) the fw_cfg DMA operations to work upon,
during S3 resume.
This behavior is unique to the DXE fw_cfg instance. Thus, add the
function to "QemuFwCfgS3Dxe.c".
- The QemuFwCfgS3ScriptWriteBytes(), QemuFwCfgS3ScriptReadBytes(),
QemuFwCfgS3ScriptSkipBytes(), and QemuFwCfgS3ScriptCheckValue()
functions are also implemented usefully, since the client module's
Callback() function is expected to invoke them.
Each of the first three functions produces MEM_WRITE, IO_WRITE, and
MEM_POLL opcodes, to set up the DMA command in reserved memory, to start
the DMA transfer, and to check the DMA result, respectively.
The QemuFwCfgS3ScriptCheckValue() function produces a MEM_POLL opcode to
validate an unsigned integer field in data that was read via
QemuFwCfgS3ScriptReadBytes().
This behavior is again unique to the DXE fw_cfg instance, so add the
functions to "QemuFwCfgS3Dxe.c".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the PEI fw_cfg instance:
- QemuFwCfgS3Enabled() queries S3 enablement via fw_cfg. This behavior is
shared with the DXE fw_cfg instance, and the PEI fw_cfg instance already
pulls in the function from "QemuFwCfgS3PeiDxe.c".
- If QemuFwCfgS3Enabled() returns TRUE, the client module is permitted to
call QemuFwCfgS3CallWhenBootScriptReady(). However, in the PEI phase we
have no support for capturing ACPI S3 Boot Script opcodes, hence we
return RETURN_UNSUPPORTED unconditionally. This behavior is unique to
the PEI fw_cfg instance, so add the function to "QemuFwCfgS3Pei.c".
- Consequently, the QemuFwCfgS3ScriptWriteBytes(),
QemuFwCfgS3ScriptReadBytes(), QemuFwCfgS3ScriptSkipBytes(), and
QemuFwCfgS3ScriptCheckValue() functions must never be called. (They
could only be called from the client module's callback, but
QemuFwCfgS3CallWhenBootScriptReady() will never install such callback in
the PEI fw_cfg instance -- see above.)
This behavior is not unique to the PEI fw_cfg instance (it is shared
with the Base Null instance), so pull in these functions from
"QemuFwCfgS3BasePei.c".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the Base Null instance:
- QemuFwCfgS3Enabled() returns constant FALSE. This is unique to the Base
Null instance, and the function is already present in
"QemuFwCfgS3Base.c".
- The QemuFwCfgS3CallWhenBootScriptReady() function must never be called
(according to the documentation, given the above). This is also unique
to the Base Null instance, so implement the function in
"QemuFwCfgS3Base.c".
- Consequently, the QemuFwCfgS3ScriptWriteBytes(),
QemuFwCfgS3ScriptReadBytes(), QemuFwCfgS3ScriptSkipBytes(), and
QemuFwCfgS3ScriptCheckValue() functions must never be called either.
This behavior is not unique to the Base Null instance (it will be shared
with the PEI fw_cfg instance), so add these functions to
"QemuFwCfgS3BasePei.c".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Introduce the following APIs:
- QemuFwCfgS3CallWhenBootScriptReady(): central function that registers a
callback function, with a context parameter, for when ACPI S3 Boot
Script opcodes can be produced. This function also allocates reserved
memory for the opcodes to operate upon.
The client module is supposed to produce the boot script fragment in the
callback function.
- QemuFwCfgS3ScriptWriteBytes(), QemuFwCfgS3ScriptReadBytes(),
QemuFwCfgS3ScriptSkipBytes(), QemuFwCfgS3ScriptCheckValue(): helper
functions, available only to the above callback function, for composing
the boot script fragment. QemuFwCfgS3ScriptSkipBytes() can double as a
plain "select" whenever necessary.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
At this point we're ready to retire QemuFwCfgS3Enabled() from the
QemuFwCfgLib class, together with its implementations in:
- ArmVirtPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c
- OvmfPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c
Extend all modules that call the function with a new QemuFwCfgS3Lib class
dependency. Thanks to the previously added library class, instances, and
class resolutions, we can do this switch now as tightly as possible.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
QemuFwCfgS3Enabled() in "OvmfPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c"
queries the "etc/system-states" fw_cfg file.
The same implementation is now available factored-out in
"OvmfPkg/Library/QemuFwCfgS3Lib/QemuFwCfgS3PeiDxe.c". It is available to
PEIMs through the PeiQemuFwCfgS3LibFwCfg instance, and to DXE_DRIVER and
DXE_RUNTIME_DRIVER modules through the DxeQemuFwCfgS3LibFwCfg instance.
Resolve QemuFwCfgS3Lib accordingly.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch introduces PeiQemuFwCfgS3LibFwCfg, a limited functionality
QemuFwCfgS3Lib instance, for PEI phase modules.
The patch also introduces DxeQemuFwCfgS3LibFwCfg, a full functionality
QemuFwCfgS3Lib instance, for DXE_DRIVER and DXE_RUNTIME_DRIVER modules.
These library instances share the QemuFwCfgS3Enabled() function. The
function actually uses fw_cfg; the implementation is copied from
"OvmfPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c".
The library instances will diverge in the following patches.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This library instance returns constant FALSE from QemuFwCfgS3Enabled(),
and all other library functions trigger assertion failures. It is suitable
for QEMU targets and machine types that never enable S3.
The QemuFwCfgS3Enabled() implementation is copied from
"ArmVirtPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c". Stubs for further
QemuFwCfgS3Lib APIs (with assertion failures, see above) will be added
later.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This library class will enable driver modules (a) to query whether S3
support was enabled on the QEMU command line, (b) to produce fw_cfg DMA
operations that are to be replayed at S3 resume time.
Declare the library class in OvmfPkg/OvmfPkg.dec, and add the library
class header under OvmfPkg/Include/Library/. At the moment, the only API
we expose is QemuFwCfgS3Enabled(), which we'll first migrate from
QemuFwCfgLib. Further interfaces will be added in later patches.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The OpensslLibCrypto library instance (which does not contain libssl
functions) is sufficient for the Secure Boot feature.
Ease security analysis by excluding libssl functionality from the
OpensslLib instance we use with TLS_ENABLE=FALSE.
Cc: Gary Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tomas Hoger <thoger@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
... because this function use VA_COPY.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Introduce the FW_CFG_IO_DMA_ADDRESS macro for IO Ports 0x514 and 0x518
(most significant and least significant halves of the DMA Address
Register, respectively), and update all references in OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Introduce the FW_CFG_IO_DATA macro for IO Port 0x511 (the Data Register),
and update all references in OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Introduce the FW_CFG_IO_SELECTOR macro for IO Port 0x510 (the Selector
Register), and update all references in OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Commit df73df138d ("OvmfPkg/AcpiPlatformDxe: replay
QEMU_LOADER_WRITE_POINTER commands at S3", 2017-02-09) added
"BootScript.c" with such comments on the PointerValue field of
CONDENSED_WRITE_POINTER, and on the corresponding PointerValue parameter
of SaveCondensedWritePointerToS3Context(), that did not consider the
then-latest update of the QEMU_LOADER_WRITE_POINTER structure. (Namely,
the introduction of the PointeeOffset field.)
The code is fine as-is -- ProcessCmdWritePointer() already calls
SaveCondensedWritePointerToS3Context() correctly, and "BootScript.c"
itself is indifferent to the exact values --, but the comments in
"BootScript.c" should match reality too. Update them.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The Count parameter of RShiftU64() must be strictly smaller than 64.
ProcessCmdAddPointer() and ProcessCmdWritePointer() currently ensure this
by "cleverly" breaking the last bit of a potentially 8-byte right shift
out to a separate operation.
Instead, exclude the Count==64 case explicitly (in which case the
preexistent outer RShiftU64() would return 0), and keep only the inner
RShiftU64(), with the direct Count however.
This is not a functional change, just style improvement.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Ultimately, each QEMU_LOADER_WRITE_POINTER command creates a guest memory
reference in some QEMU device. When the virtual machine is reset, the
device willfully forgets the guest address, since the guest memory is
wholly invalidated during platform reset.
... Unless the reset is part of S3 resume. Then the guest memory is
preserved intact, and the firmware must reprogram those devices with the
original guest memory allocation addresses.
This patch accumulates the fw_cfg select, skip and write operations of
ProcessCmdWritePointer() in a validated / condensed form, and turns them
into an ACPI S3 Boot Script fragment at the very end of
InstallQemuFwCfgTables().
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The QEMU_LOADER_WRITE_POINTER command instructs the firmware to write the
address of a field within a previously allocated/downloaded fw_cfg blob
into another (writeable) fw_cfg file at a specific offset.
Put differently, QEMU_LOADER_WRITE_POINTER propagates, to QEMU, the
address that QEMU_LOADER_ALLOCATE placed the designated fw_cfg blob at, as
adjusted for the given field inside the allocated blob.
The implementation is similar to that of QEMU_LOADER_ADD_POINTER. Since
here we "patch" a pointer object in "fw_cfg file space", not guest memory
space, we utilize the QemuFwCfgSkipBytes() and QemuFwCfgWriteBytes() APIs
completed in commit range 465663e9f128..7fcb73541299.
An interesting aspect is that QEMU_LOADER_WRITE_POINTER creates a
host-level reference to a guest memory location. Therefore, if we fail to
process the linker/loader script for any reason, we have to clear out
those references first, before we release the guest memory allocations in
response to the error.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The longest line is currently 84 characters long.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
No functional changes in this patch, just prepare the grounds with some
reformatting (trailing comma after the last enumeration constant,
horizontal whitespace insertion) so that the next patch can be cleaner.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When writing to IO port 0xB2 (ICH9_APM_CNT), QEMU by default injects an
SMI only on the VCPU that is writing the port. This has exposed corner
cases and strange behavior with edk2 code, which generally expects a
software SMI to affect all CPUs at once. We've experienced instability
despite the fact that OVMF sets PcdCpuSmmApSyncTimeout and
PcdCpuSmmSyncMode differently from the UefiCpuPkg defaults, such that they
match QEMU's unicast SMIs better. (Refer to edk2 commits 9b1e378811 and
bb0f18b0bce6.)
Using the new fw_cfg-based SMI feature negotiation in QEMU (see commits
50de920b372b "hw/isa/lpc_ich9: add SMI feature negotiation via fw_cfg" and
5ce45c7a2b15 "hw/isa/lpc_ich9: add broadcast SMI feature"), we can ask
QEMU to broadcast SMIs. Extensive testing from earlier proves that
broadcast SMIs are only reliable if we use the UefiCpuPkg defaults for the
above PCDs. With those settings however, the broadcast is very reliable --
the most reliable configuration encountered thus far.
Therefore negotiate broadcast SMIs with QEMU, and if the negotiation is
successful, dynamically revert the PCDs to the UefiCpuPkg defaults.
Setting the PCDs in this module is safe:
- only PiSmmCpuDxeSmm consumes them,
- PiSmmCpuDxeSmm is a DXE_SMM_DRIVER, launched by the SMM_CORE
(MdeModulePkg/Core/PiSmmCore/PiSmmCore.inf),
- the SMM_CORE is launched by the SMM IPL runtime DXE driver
(MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf),
- the SMM IPL has a DEPEX on EFI_SMM_CONTROL2_PROTOCOL,
- OvmfPkg/SmmControl2Dxe produces that protocol.
The end result is that PiSmmCpuDxeSmm cannot be dispatched before
SmmControl2Dxe installs EFI_SMM_CONTROL2_PROTOCOL and returns from its
entry point. Hence we can set the PCD's consumed by PiSmmCpuDxeSmm in
SmmControl2Dxe.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=230
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek
Phil Dennis-Jordan
Jordan Justen
Dandan Bi
Anthony PERARD
Ruiyu Ni