BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
In upcoming patches, the setting of the bits in the GHCB ValidBitmap will
be performed in multiple places. In order to reduce code duplication, add
an interface, VmgSetOffsetValid(), to VmgExitLib library to perform this
function. Also, to keep management of the ValidBitmap within the library,
add an inteface, VmgIsOffsetValid(), to return whether the bit in the
ValidBitmap is set for a specified offset.
The new VmgSetOffsetValid() function is a VOID function and will be an
empty function in the VmgExitLibNull implementation of the VmgExitLib
library.
The new VmgIsOffsetValid() function returns a BOOLEAN to indicate if the
offset is valid. This will always return FALSE in the VmgExitLibNull
implementation of the VmgExitLib library.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Acked-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <0bcb2373f8c6e0171ae277d3d7c2eb284621355e.1604685192.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
Use OFFSET_OF () and sizeof () to calculate the GHCB register field
offsets instead of hardcoding the values in the GHCB_REGISTER enum.
Define only fields that are used per the GHCB specification, which will
result in removing some fields and adding others.
Also, remove the DR7 field from the GHCB_SAVE_AREA structure since it is
not used/defined in the GHCB specification and then rename the reserved
fields as appropriate.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <5e9245c7600b9b2d55dd7586b8df28b91b75b72b.1604685192.git.thomas.lendacky@amd.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2528
Currently, CL command contains multiple C files will be compiled,
and that caused command line too long, which may trigger build error.
In order to solve this issue, the following rules is used in this scene:
If the number of C files is greater than one, a txt file will be used
to record these C files, and replaces the corresponding content in
command line with the file name.
Else (only one C file listed in the command line), the length of the
whole CL command line will determine whether use a file to record. If
the length exceeds the limited max length, use the recording file; else
C file name directly listed in the command line
Signed-off-by: Mingyue Liang <mingyuex.liang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2977
For a source-level BIOS debugger the .map files are quite useful with one
major shortcoming: the debugger cannot know, solely from the .map file,
the format (PE/COFF vs. TE) of the image included in the final BIOS ROM
Update report map file format
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2977
For a source-level BIOS debugger the .map files are quite useful with one
major shortcoming: the debugger cannot know, solely from the .map file,
the format (PE/COFF vs. TE) of the image included in the final BIOS ROM
Add Type=PE or TE in the map file
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Commit 6ad819c introduced two new functions in FmpDeviceLib:
1. FmpDeviceCheckImageWithStatus ()
2. FmpDeviceSetImageWithStatus ()
These functions allow an FmpDeviceLib implementation to return a
Last Attempt Status code value within the Device Library range from
LAST_ATTEMPT_STATUS_DEVICE_LIBRARY_MIN_ERROR_CODE_VALUE to
LAST_ATTEMPT_STATUS_DEVICE_LIBRARY_MAX_ERROR_CODE_VALUE.
To maintain backward compatibility, commit 6ad819c did not update
the FmpDxe driver to invoke these functions. FmpDeviceLib instances
should update their FmpDeviceCheckImage () function to simply call
FmpDeviceCheckImageWithStatus (). Similarly, FmpDeviceSetImage ()
should simply call FmpDeviceSetImageWithStatus (). This is
demonstrated in the implementation of these functions in
FmpDevicePkg/Library/FmpDeviceLibNull/FmpDeviceLib.c. By doing so,
the library can remain compatible with FmpDxe implementations before
and after this transition.
This commit updates FmpDxe to call the WithStatus () version of
these functions enabling the Last Attempt Status code returned to
be accessible to FmpDxe.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Wei6 Xu <wei6.xu@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2972
When using incremental build to delete an included xxx.asi file from
the ASL file, the xxx.asl.trim.deps file generated by previous build
process will not be deleted from the OUTPUT directory, which caused
the dependency file still include the xxx.asl.trim.deps file.
If the include file is deleted and DEPs is empty.
Signed-off-by: Mingyue Liang <mingyuex.liang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
CoreInitializeMemoryServices() logs "BaseAddress" and "Length" with
DEBUG() before DxeMain() calls ProcessLibraryConstructorList()
explicitly. (Library construction is not an automatic part of the DXE
Core entry point.)
So those DEBUG()s in CoreInitializeMemoryServices() are issued against
an un-constructed DebugLib, and also against a -- possibly underlying --
un-constructed SerialPortLib.
Some DebugLib instances can deal with this (see for example commit
91a5b13650, "OvmfPkg/PlatformDebugLibIoPort: fix port detection for
use in the DXE Core", 2018-08-06), while some others can't (see for
example the DebugLib instance
"MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf"
coupled with the SerialPortLib instance
"ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.inf").
Addressing this issue in a SerialPortLib instance that underlies
BaseDebugLibSerialPort seems wrong; either the DebugLib instance should
cope directly with being called un-constructed (see again commit
91a5b13650), or the DXE Core should log relevant information *at
least* after library instances have been constructed. This patch
implements the latter (only for the "BaseAddress" and "Length" values
calculated by CoreInitializeMemoryServices()).
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jeff Brasen <jbrasen@nvidia.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201103161557.30621-1-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
On windows system, when use command chcp displays the number of the
active console code page, if the active console code is 936, run
make cleanall in the BaseTools will hang.
Issue reproduce step:
chcp 936
edksetup.bat VS2015
cd BaseTools
nmake cleanall
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2998
In the function FileBufferCutLine(),set the CutLine pointer to NULL,
The function header specifies that the pointer is valid on a successful
or failed return code.
Signed-off-by: Enze Zhu <zhuenze@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2648
This patch is to enable the Module scoped Structure Pcd usage.
User can set structure pcd field value in module scope. For example,
under the [components] section of a dsc file, user can override some
field value for a specific module.
Package/Module.inf{
<PcdsFixedAtBuild>
gUefiTokenSpaceGuid.StructurePcdModule.FieldName | 5
}
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Tested-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
CoreInitializeMemoryServices was not checking for any existing memory
allocation created in the HOB producer phase. If there are memory
allocations outside of the region covered by the HOB List then Gcd could
select that region for memory which can result in the memory allocation
to not be handled and memory overwrites.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
When generating compressed section, the build tool rely on the
build intermediate files, which were generated in last build, to
get the file list. This method will cause the incremental build to
generate incorrect build result. To reproduce this incremental build
error, you can do:
1. build Ovmf
2. change the module OvmfPkg\AcpiTables a source file Facp.aslc
name from Facp.aslc to Facpxxx.aslc.
3. change the Facp.aslc file name in [sources] section of AcpiTables.inf
4. incremental build Ovmf
you will see the in AcpiTables module Makefile, the corresponding
Facp.acpi file is not changed.
This patch is to make the build always get file list from the INF.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The Generic ACPI for Arm Components 1.0 Platform Design
Document, s2.6.4 "ASL code examples" provides information
to describe an Arm CoreLink CMN-600 Coherent Mesh Network
using an ASL definition block table.
The SSDT CMN-600 Table Generator uses the Configuration
Manager protocol to obtain the following information about
the CMN-600 device on the platform:
- the PERIPHBASE address location and address range;
- the ROOTNODEBASE address location;
- the number of Debug and Trace Controller (DTC)
and their respective interrupt number;
The CMN-600 mesh is described using the CM_ARM_CMN_600_INFO
and CM_ARM_EXTENDED_INTERRUPT structures in the Configuration
Manager.
The SSDT CMN-600 Table generator:
- gets the CMN-600 hardware information
from the configuration manager.
- uses the AmlLib interfaces to parse the AML
template BLOB and construct an AML tree.
- uses the AmlLib to update:
- the "_UID" value;
- the address location and range of the PERIPHBASE;
- the address location of the ROOTNODEBASE;
- the number of Debug and Trace Controller (DTC)
and their respective interrupt number;
- serializes the AML tree to an output buffer.
This output buffer contains the fixed-up AML code,
which is then installed as an ACPI SSDT table.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Co-authored-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Add Interrupt Vector Flag definitions for Extended Interrupt
Descriptor, and macros to test the flags.
Ref: ACPI specification 6.4.3.6
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add RedfishHostInterfaceDxe and PlatformHostInterfaceLibNull to Redfish
package.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Fan Wang <fan.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
This is the abstract driver to consume the contents of SMBIOS type 42h
device descriptor and protocol type data which provided by
PlatformHostInterfaceLib, and create SMBIOS type 42 record through
EFI SMBIOS protocol.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Fan Wang <fan.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
NULL instance of PlatformHostInterfaceLib.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Fan Wang <fan.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Fan Wang <fan.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Add definitions of SMBIOS Type 42 Host Interface.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Fan Wang <fan.wang@intel.com>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Fan Wang <fan.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Add accepted dependency of RedfishPkg in RedfishPkg CI
yaml file.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Fan Wang <fan.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Implementation of EFI_REST_JSON_STRUCTURE_PROTOCOL, refer to UEFI spec
2.8 Section 29.7.3 EFI REST JSON Resource to C Structure Converter.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Fan Wang <fan.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Add definitions of EFI REST JSON Structure according to UEFI spec
2.8 Section 29.7.3 EFI REST JSON Resource to C Structure Converter.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Fan Wang <fan.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
With some super-speed USB mass storage devices it has been observed
that a USB transaction error may occur when attempting the set the
device address during enumeration.
According the the xHCI specification (section 4.6.5) ...
"A USB Transaction ErrorCompletion Code for an Address Device Command
may be due to a Stall response from a device. Software should issue a
Disable Slot Commandfor the Device Slot then an Enable Slot Command
to recover from this error."
To fix this, retry the device slot initialization if it fails due to a
device error.
Change was verified using a superspeed mass storage device that was
occasionally failing to enumerate in UEFI. With this change this failure
to enumerate was resolved. This failure was also only seen in UEFI and not
in the OS.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Use a pool allocation for the RSDP ACPI root pointer structure if no
memory limit is in effect that forces us to use page based allocation,
which may be wasteful if they get rounded up to 64 KB as is the case
on AArch64.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
If no memory allocation limit is in effect for ACPI tables, prefer
pool allocations over page allocations, to avoid wasting memory on
systems where page based allocations are rounded up to 64 KB, such
as AArch64.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
On AArch64 systems, page based allocations for memory types that are
relevant to the OS are rounded up to 64 KB multiples. This wastes
some space in the ACPI table memory allocator, since it uses page
based allocations in order to be able to place the ACPI tables low
in memory.
Since the latter requirement does not exist on AArch64, switch to pool
allocations for all ACPI tables except the root tables if the active
allocation policy permits them to be anywhere in memory. The root
tables will be handled in a subsequent patch.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The ProcessorCharacteristics is a UINT16 field, so the
PROCESSOR_CHARACTERISTIC_FLAGS bitfield should be UINT16 too.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
SMBIOS 3.4.0 defines bit 9 of the Type 4 table Processor Characteristics
field to be the ARM64 SoC ID support. Add it to the
PROCESSOR_CHARACTERISTIC_FLAGS struct bitfield.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
SMBIOS 3.4.0 defines bit 9 of the Type 4 table Processor Characteristics
field to be the ARM64 SoC ID support. Add support for it to the
smbiosview command.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The "boot from CD supported" string definition name should contain the
word "from" instead of "form".
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Fix a couple of typos in SmbiosViewStrings.uni:
"Boot form CD" should be "Boot from CD", and "plugged from the wall"
should be "plugged into the wall".
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3028
The FirmwareVolume2Protocol->GetNextFile() produced by DXE Core can be used
to search for a file based on the value of *FileType input. However, this
service will always return EFI_NOT_FOUND if the input FileType is set to
EFI_FV_FILETYPE_MM_STANDALONE or EFI_FV_FILETYPE_MM_CORE_STANDALONE, Which
means user can't use this service to search any standalone MM image in that
FV.
This patch update the FirmwareVolume2Protocol->GetNextFile() service to
support searching standalone MM module.
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Provides the ability for a given FMP device library instance to
return a Last Attempt Status code during check image and set image
operations with FmpDeviceCheckImageEx() and FmpDeviceSetImageEx().
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
The FMP dependency libraries are leveraged during firmware update
to check for dependencies required to update the image.
This change adds granular Last Attempt Status code support to these
services so failures can be more easily observed during the firmware
update process via Last Attempt Status codes.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Increases the level of granularity for Last Attempt Status codes
returned from SetTheImage() in FmpDxe. This allows better
identification of the error that occurred in the set image
operation using Last Attempt Status codes.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
CheckTheImage() is currently used to provide the CheckImage()
implementation for the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance
produced by FmpDxe in addition to being called internally in the
SetImage() path.
Since CheckTheImage() plays a major role in determining the
validity of a given firmware image, an internal version of the
function is introduced - CheckTheImageInternal() that is capable
of returning a Last Attempt Status code to internal callers such
as SetTheImage().
The CheckImage() API as defined in the UEFI Specification for
EFI_FIRMWARE_MANAGEMENT_PROTOCOL is not impacted by this change.
CheckTheImageInternal() contains unique Last Attempt Status codes
during error paths in the function so it is easier to identify
the issue with a particular image through the Last Attempt Status
code value.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Introduces a public and a private header file to define more
granular usage of the UEFI Specification defined unsuccessful
vendor range for Last Attempt Status codes. The unsuccessful
vendor range is described in UEFI Specification 2.8A section 23.4.
The public header file Include/LastAttemptStatus.h defines ranges
within the unsuccessful vendor range. At a high-level, the two
main ranges are defined are the FMP Reserved range and the Device
Library Reserved range.
The FMP Reserved range is reserved for usage of components within
FmpDevicePkg. PrivateInclude/FmpLastAttemptStatus.h contains
usage details and specific Last Attempt Status code definitions.
The Device Library Reserved range is reserved for usage by
FmpDeviceLib instances. Each library may define custom Last
Attempt Status codes within the bounds defined in
Include/LastAttemptStatus.h:
[LAST_ATTEMPT_STATUS_DEVICE_LIBRARY_MIN_ERROR_CODE_VALUE,
LAST_ATTEMPT_STATUS_DEVICE_LIBRARY_MAX_ERROR_CODE_VALUE]
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Adds the following macros to define the unsuccessful vendor range
min and max (defined in UEFI Specification 2.8):
1. LAST_ATTEMPT_STATUS_ERROR_UNSUCCESSFUL_VENDOR_RANGE_MIN
2. LAST_ATTEMPT_STATUS_ERROR_UNSUCCESSFUL_VENDOR_RANGE_MAX
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3017
Platform microcode FV may have padding between each version of microcode
binary, and current FSP-T/LoadMicrocodeDefault() cannot handle this case
and return not_found unexpectedly.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Signed-off-by: Cosmo Lai <cosmo.lai@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3007
Currently UsbDevContext is not cleaned up if USB slot initialization is
failed, the wrong context data will affect next USB devices and
the USB devices can not be enumerated.
Need to disable slot if USB slot initialization is failed.
Below test cases are passed on UpXtreme:
a. USB 3.0 thumb drives can be recognized in UEFI shell
b. SUT can boot to Puppylinux from USB3.0 mass storage,
the storage can be recognized in linux
c. Plug in a USB keyboard (hot plug) and enumeration is OK
in UEFI shell and linux
d. Plug in a USB mouse(hot plug) and enumeration is OK in linux.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3001
When the 64-bit version of VS compiler is used, the generated
PcdValueInit tool will be failed to compile.
This patch is going to fix that issue.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The function ArmReplaceLiveTranslationEntry () is passed as a VOID
pointer to WriteBackDataCacheRange (). This produces the following
warning on VS2019:
warning C4152: nonstandard extension, function/data pointer
conversion in expression
This change explicitly casts the argument to the formal parameter
type VOID*.
This can be reproduced with the following build command:
build -b DEBUG -a AARCH64 -t VS2019 -p ArmPkg/ArmPkg.dsc
-m ArmPkg/Library/ArmMmuLib/ArmMmuPeiLib.inf
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2835
There's several occurrences of a UINT64 or an EFI_PHYSICAL_ADDRESS
being assigned to a UINT32 value in ArmMmuLib. These result in
warning C4244 in VS2019:
warning C4244: '=': conversion from 'UINT64' to 'UINT32', possible
loss of data
warning C4244: '=': conversion from 'EFI_PHYSICAL_ADDRESS' to
'UINT32', possible loss of data
This change explicitly casts the values to UINT32.
These can be reproduced with the following build command:
build -b DEBUG -a ARM -t VS2019 -p ArmPkg/ArmPkg.dsc
-m ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Addresses BZ https://bugzilla.tianocore.org/show_bug.cgi?id=2380 where
explicit casts are required for 64 to 32 bit assignment.
We can apply a straight cast for Time->Nanosecond since we already checked
for overflow.
On the other hand, we may have a frequency that is greater than UINT32_MAX
for Capabilities->Resolution. But using the frequency for the resolution
is the wrong approach anyway, since we can't actually vouch for the actual
resolution of the virtual library. Instead, play it safe by defaulting to
1 Hz, which is what a standard PC-AT CMOS RTC device would use.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Fix the following ECC reported errors in SsdtSerialPortFixupLib.
- [9002] The function headers should follow Doxygen special
documentation blocks in section 2.3.5 in Comment,
<@param [in]> does NOT have [in, out]
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Tom Lendacky
Mingyue Liang
Yunhua Feng
Michael Kubacki
Laszlo Ersek
Enze Zhu
Bob Feng
Jeff Brasen
Pierre Gondois
Sami Mujawar
Abner Chang
Jon Hunter
Ard Biesheuvel
Rebecca Cran
Siyuan Fu
Cosmo Lai
Luo, Heng
Pete Batard