StandaloneMmCpu driver is only used for Arm architecture and
StandaloneMmCoreEntryPointLib for Arm has specific implementation with
StandaloneMmCpu driver.
Move StandaloneMmCpu Driver and StandaloneMmCoreEntryPointLib for Arm
to ArmPkg.
Continuous-integration-options: PatchCheck.ignore-multi-package
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
StandaloneMm in Arm is UP-migratable which means StandaloneMm
cannot run concurrently.
Therefore, remove per-cpu feature in StandaloneMm.
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Arm has three types of communication buffer
- Non secure communication buffer: shared buffer with NS partition
- Secure communication buffer: shared buffer with Secure partition
- Internal Misc service buffer: For misc service
i.e. for services that do not use MmCommunication protocol,
a buffer is created and populated internally.
Since, internal Misc service buffer is allocated dynamically in
StandaloneMm there is no additional check required for the Misc
service buffer.
This patch move sanity check of communication buffer from
StandaloneMmCpu Driver to StandaloneMmEntryPoint.
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
This patch introduces a PI_MM_CPU_DRIVER_EP protocol to handle
Mmcommunication request based on the CPU driver.
Previously the CPU driver entry point was retrieved using the
gEfiArmTfCpuDriverEntryPoint HOB.
However, this practice is incorrect as StandaloneMM must be a HOB
consumer and not a HOB producer.
Therefore, remove the CPU entry HOB gEfiArmTfCpuDriverEntryPoint,
and replace it with the CPU driver entry protocol
EDKII_PI_MM_CPU_DRIVER_EP_PROTOCOL.
The EDKII_PI_MM_CPU_DRIVER_EP_PROTOCOL installed in
StandaloneMmCpuInitialize() will be used by the code in
Arm/StandaloneMmCoreEntryPoint.
This protocol is used like below:
+=====+
|StandaloneMmCore|
+=====+
|
CEntryPoint()
===================
|
ProcessModuleEntryPointList()
|
+--> StandaloneMmMain()
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| // Load StandaloneMmCpu driver which implements
| // CpuDriverEntryPoint used by DelegatedEventLoop().
| // and install the gEdkiiPiMmCpuDriverEpProtocolGuid.
--------------
|
... // Get CpuDriverEntryPoint implemented by
// StandaloneMmCpu driver with gEdkiiPiMmCpuDriverEpProtocolGuid
|
DelegatedEventLoop() // Handle request by delegating it to
// CpuDriverEntryPoint.
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
When at last hob, the FV HOB check function should
exit from the loop
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
MmIpl should locate MM core FV location PPI to find current MM
FV location.
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Skip MM FV HOB build if MM platform HOB list already has
the HOB.
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Clang compile will optimize undefined behavior (UB)
like a pointer with NULL + size, so it is better to
check the pointer before using it.
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
4-level paging supports translating 48-bit linear addresses to 52-bit
physical addresses. Since linear addresses are sign-extended,
the linear-address space of 4-level paging is: [0, 2^47-1] and
[0xffff8000_00000000, 0xffffffff_ffffffff]. So only [0, 2^47-1]
linear-address range maps to the identical physical-address range
when 5-Level paging is disabled.
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
BFV is outside the MMRAM. Currently, StandaloneMmIplPei uses the API
MmUnblockMemoryRequest() to unblock the access for the BFV. However,
the BFV's memory might be gone after ExitBootService event. If any
access to the memory, unexpected error would happen.
To fix the above issue, StandaloneMmCore should shadow standalone BFV
into MMRAM before processing it, then free the shadowed BFV after MM
driver dispatch is done.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
When CPU smm profile feature was enabled, unblocked memory should
not set logging attribute when building resource HOB.
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
If PcdCpuSmmRestrictedMemoryAccess is TRUE, only unblocked memory
Regions are available, if FALSE, all system memory is available.
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Create misc HOBs for CPU, it included MM ACPI S3 Enable HOB,
MM CPU sync configuration HOB, CPU SMM base HOB, SMRAM memory HOB,
MP Information2 HOB and ACPI variable HOB
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Create the HobList which included the HOBs Standalone MM foundation needed,
it included communication buffer HOB, StandaloneMm Core module HOB and
StandaloneMm Core FV HOB
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
MmIpl will issue a SWSMI by MM communicate to call gEventMmDispatchGuid
handler to dispatch all StandaloneMm drivers
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Install end of PEI notify PPI for issue gEfiMmEndOfPeiProtocol
Handler in MM
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Install MmCommunicationPpi under PEI stage, PEIM could
use this PPI to communicate with MM handler
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
StandaloneMmIplPei will search the MM Core driver in all FV and relocate
it to MM RAM, and enter MM Core entrypoint to run MM Core.
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
MM communication buffer HOB data is for StandaloneMm Core and
MM communicate DXE driver.
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Create the notifications of some protocols and event that
the Standalone Mm requires in MmCommunicationDxe:
gEfiDxeMmReadyToLockProtocolGuid
gEfiEventExitBootServicesGuid
gEfiEventVirtualAddressChangeGuid
gEfiEndOfDxeEventGroupGuid
gEfiEventReadyToBootGuid
Signed-off-by: Dun Tan <dun.tan@intel.com>
Add a new MmCommunicationDxe driver. The driver is to:
1.Install gEfiMmCommunication2ProtocolGuid
2.Install gEfiMmCommunicationProtocolGuid
3.Create the notifications of some protocols and event that
the Standalone Mm requires
Signed-off-by: Dun Tan <dun.tan@intel.com>
StandaloneMmCpu now can supports more architectures like RISC-V besides
ARM/AARCH64.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: levi.yun <yeoreum.yun@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
There are two scene communicate with StandaloneMm(MM):
1 edk2 -> TF-A -> MM, communicate MM use non-secure buffer which
specify by EFI_SECURE_PARTITION_BOOT_INFO.SpNsCommBufBase;
2 RAS scene: fiq -> TF-A -> MM, use secure buffer which
specify by EFI_SECURE_PARTITION_BOOT_INFO.SpShareBufBase;
For now, the second scene will failed because check buffer address.
This patch add CheckBufferAddr() to support check address for secure
buffer.
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the StandaloneMmPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This change allows to build StandaloneMmPkg components for 32bit Arm
StandaloneMm firmware.
This change mainly moves AArch64/ source files to Arm/ side directory
for several components: StandaloneMmCpu, StandaloneMmCoreEntryPoint
and StandaloneMmMemLib. The source file is built for both 32b and 64b
Arm targets.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Use intermediate (UINTN) cast when casting int from/to pointer. This
is needed as UINT64 values cast from/to 32bit pointer for 32bit
architectures.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Allow passing of a request to StandaloneMm Core through the Firmware
Framework(FF-A) using FFA_MSG_SEND_DIRECT_REQ method. This method is
used as a mechanism for requesting some service from StandaloneMm.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Bugzilla: 3150 (https://bugzilla.tianocore.org/show_bug.cgi?id=3150)
Fix ECC error "[10014] No used module files found. The source file
[StandaloneMmCpu.h] is existing in module directory but it is not
described in INF file."
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Bugzilla: 3150 (https://bugzilla.tianocore.org/show_bug.cgi?id=3150)
Fix ECC error "[5007] There should be no initialization of a variable
as part of its declaration Variable."
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Bugzilla: 3150 (https://bugzilla.tianocore.org/show_bug.cgi?id=3150)
Fix the ECC tool reported error "[3002] Non-Boolean comparisons
should use a compare operator".
Also fix the following:
- add curly braces for 'if' condition statements to comply
with the coding standard.
- The value returned by GET_GUID_HOB_DATA() is stored in
*HobData. Therefore, check *HobData against NULL. The
original code was checking HobData which is incorrect.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Update the reference to MM communicate to refer to the MM communicate 2
protocol instead. This makes no difference for the MM side of the
implementation, but is more accurate nonetheless, since the original MM
protocol does not work in combination with standalone MM.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch adds a simple CPU driver that exports the
EFI_MM_CONFIGURATION_PROTOCOL to allow registration of the Standalone
MM Foundation entry point. It preserves the existing notification
mechanism for the configuration protocol.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Levi Yun
Hongbin1 Zhang
Wei6 Xu
Dun Tan
Tuan Phan
Ming Huang
Michael Kubacki
Michael D Kinney
Etienne Carriere
Ilias Apalodimas
Sami Mujawar
Ard Biesheuvel
Ard Biesheuvel
Supreeth Venkatesh