The ACPI 6.3 specification adds support for describing
ARMv8.1 EL2 virtual timers. Update GTDT Generator
to extend this support.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The PPTT generator uses the configuration manager protocol to
obtain information about platform's processor topology and caches.
This data is then used to generate the PPTT table.
The table generator supports ACPI 6.3, PPTT table revision 2.
The dynamic PPTT generator also carries out extensive input
validation which includes cycle detection and MADT-PPTT
cross-validation. A number of architectural compliance checks
are also performed.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The Dynamic Tables Framework now supports generating Multiple APIC
Description Table (MADT) revision 5 for ARM platforms while maintaining
backward-compatibility with ACPI 6.2.
The relevant change is the enablement of the Statistical Profiling
Extension (SPE).
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Check for duplicate frame numbers when populating the GT Block Timer
Frames inside the GTDT table generator.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Check for duplicate ACPI Processor UIDs when populating the GIC CPU
(GICC) Interface structures inside the MADT table generator.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Added generic function for detecting duplicate values in an array.
Also defined a function prototype to test if two objects are equal.
The prototype is used as an argument to the 'FindDuplicateValues'
function.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Added code to check if the Generic Timer Block Structure's frame number
provided by the platform repository is within the allowed range (0-7).
References:
- ACPI 6.2 Errata A, Table 5-122, September 2017
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch was originally merged in edk2 master at
d3a15f435f. However, this was
later reverted at 82c4426a17
as it was merged during the Soft Feature Freeze for
edk2-stable201903.
Resubmitting this patch as the edk2 merge window is now open.
According to ACPI 6.2 Specification - Errata A, 'One,
and only one, GIC distributor structure must be present
in the MADT for an ARM based system'. Therefore,
the GIC Distributor ID field in the ACPI MADT GICD
substructure can be set to zero and there is no need
for the Configuration Manager to provide this information.
Update the CM_ARM_GICD_INFO structure to remove the GicId
field. Similarly update the MADT Generator to set the GicId
field in the GICD substructure to zero.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch was originally merged in edk2 master at
6814256083. However, this was
later reverted at db8382ef5e
as it was merged during the Soft Feature Freeze for
edk2-stable201903.
Resubmitting this patch as the edk2 merge window is now open.
The DBG2_DEBUG_PORT_DDI() macro supports adding only one
Generic Base Address Register. Therefore, removed the
superfluous parameter NumReg and updated the macro to
use DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS which has
a value 1.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch originally merged in edk2 master at
c788bdaba4. However, this was
later reverted at bdbbedea94
as it was merged during the Soft Feature Freeze for
edk2-stable201903.
Resubmitting this patch as the edk2 merge window is now open.
Added option for OEMs to provide OEM Table ID and
OEM Revision for ACPI tables.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch was originally merged in edk2 master at
1d49a75367. However, this was
later reverted at 334111b0da
as it was merged during the Soft Feature Freeze for
edk2-stable201903.
Resubmitting this patch as the edk2 merge window is now open.
Renamed the enum EArmObjIdMapping to EArmObjIdMappingArray
and updated the IORT generator accordingly.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch changes the stated dependency in AcpiDbg2LibArm.inf from
currently listed SerialPortLib to actually required PL011UartLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This reverts commit 1d49a75367.
Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This reverts commit c788bdaba4.
Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This reverts commit 6814256083.
Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This reverts commit d3a15f435f.
Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
According to ACPI 6.2 Specification - Errata A, 'One,
and only one, GIC distributor structure must be present
in the MADT for an ARM based system'. Therefore,
the GIC Distributor ID field in the ACPI MADT GICD
substructure can be set to zero and there is no need
for the Configuration Manager to provide this information.
Update the CM_ARM_GICD_INFO structure to remove the GicId
field. Similarly update the MADT Generator to set the GicId
field in the GICD substructure to zero.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The DBG2_DEBUG_PORT_DDI() macro supports adding only one
Generic Base Address Register. Therefore, removed the
superfluous parameter NumReg and updated the macro to
use DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS which has
a value 1.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Added option for OEMs to provide OEM Table ID and
OEM Revision for ACPI tables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Renamed the enum EArmObjIdMapping to EArmObjIdMappingArray
and updated the IORT generator accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Add support for 16550 UART to ACPI SPCR table as it is a
supported UART type by HLOS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The IORT generator uses the configuration manager protocol
to obtain information about the PCI Root Complex, SMMU,
GIC ITS, Performance Monitoring counters etc. and generates
the IORT table.
The mappings between the components are represented using
tokens. The generator invokes the configuration manager
protocol interfaces and requests for objects referenced by
tokens to establish the link.
This table data is then used by the Table Manager to install
the IORT table.
The Table Manager then invokes the generator interface to free
any resources allocated by the IORT table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The MCFG generator uses the configuration manager protocol
to obtain the PCI Configuration space information from the
platform configuration manager and builds the MCFG table.
This table data is then used by the Table Manager to install
the MCFG table.
The Table Manager then invokes the generator interface to free
any resources allocated by the MCFG table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The DBG2 generator uses the configuration manager protocol
to obtain the debug serial port information from the platform
configuration manager. It then updates a template DBG2 table
structure. This table data is used by the Table Manager to
install the DBG2 table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The SPCR generator uses the configuration manager protocol to
obtain the serial port information from the platform configuration
manager. It then updates a template SPCR table structure. This
table data is used by the Table Manager to install the SPCR table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The GTDT generator uses the configuration manager protocol to
obtain information about the architectural and platform timers
available on the platform and generates the ACPI GTDT table.
This table data is then used by the Table Manager to install
the GTDT table.
The Table Manager then invokes the generator interface to free
any resources allocated by the GTDT table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The MADT generator uses the configuration manager protocol to
obtain information about the Arm interrupt controllers (GICC,
GICD, etc.) and generates the ACPI MADT table. This table data
is then used by the Table Manager to install the MADT table.
The Table Manager then invokes the generator interface to free
any resources allocated by the MADT table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The FADT generator collates the relevant information required
for generating a FADT table from configuration manager using
the configuration manager protocol. It then updates a template
FADT table structure. This table data is used by the Table
Manager to install the FADT table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
A Raw generator is a simple generator. This generator provides
the ability to install a binary blob (that contains ACPI table
data) as an ACPI table. The binary blob could be pre-generated
ACPI table data or it may be the pre-compiled output from an
iAsl compiler for a DSDT or SSDT table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
A helper library that implements common functionality
for use by table generators.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Pierre Gondois
Krzysztof Koch
Michael D Kinney
Sami Mujawar
Leif Lindholm
Ashish Singhal