On AARCH64, any code that may execute with the MMU off needs to be built
with -mstrict-align, given that unaligned accesses are not allowed unless
the MMU is enabled. This does not only affect SEC and PEI modules, but
also static libraries of the BASE type, which may be linked into such
modules, as well as into modules of other types. As it turns out, the
presence of -mstrict-align is reflected in the internal representations
of the types defined in those libraries.
When -fstrict-aliasing is passed to GCC, it assumes that pointers to
objects of different types cannot refer to the same memory location, and
attempts to exploit this fact when optimizing the code. Since such
assumptions are only valid under very strict conditions which are not
guaranteed to be met in EDK2, we disable this optimization by passing
-fno-strict-aliasing by default. [*]
When LTO is in effect, this applies equally to the code generation that
may occur at link time, which is why the linker warns about unexpected
differences in type definitions between the intermediate representations
that are present in the object files being linked. This may result in
warnings such as the one below, even if -fno-strict-aliasing is used:
MdePkg/Include/Library/BaseLib.h:1712:1:
warning: type of 'StrToGuid' does not match original declaration
[-Wlto-type-mismatch]
StrToGuid (
^
MdePkg/Library/BaseLib/SafeString.c:1506:1:
note: 'StrToGuid' was previously declared here
StrToGuid (
^
MdePkg/Library/BaseLib/SafeString.c:1506:1:
note: code may be misoptimized unless -fno-strict-aliasing is used
This warning is inadvertently triggered when linking BASE libraries built
with -mstrict-align into modules of types other than SEC or PEI, since the
types are subtly different, even though the use of code that maintains
strict alignment in a module that does not care about this is unlikely to
cause problems. And even if it did, it would still only affect code built
with -fstrict-aliasing enabled, which we disable unconditionally. So let's
just silence the warning by passing -Wno-lto-type-mismatch.
[*] Leif adds: "-fstrict-aliasing is GCC default, because it is a
restriction in the C language. Because it's a bit non-obvious, things
can go hilariously wrong in very non-obvious ways, and the potential
optimization gains are unlikely to be generally relevant,
-fno-strict-aliasing is a sensible thing to always have set (like we
do)."
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
For historical reasons, GCC builds for ARM and AARCH64 pass the
-save-temps command line option to GCC, which instructs the compiler
to preserve intermediate files, i.e., preprocessor output and generated
assembler. Given that this clutters up the Build directory, and slows
down the build, let's remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI 1.5 spec has minor update to the Data parameter for PEI
GetVariable(), and no real functional behavior change.
The modifier of Data parameter:
OUT VOID *Data
->
OUT VOID *Data OPTIONAL
The comments of Data parameter:
Data Points to the buffer which will hold the returned variable value.
->
Data Points to the buffer which will hold the returned variable value.
May be NULL with a zero DataSize in order to determine the size of the buffer needed.
The patch is to follow the spec to update the implementation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI 1.5 spec has minor update to the Data parameter for PEI
GetVariable(), and no real functional behavior change.
The modifier of Data parameter:
OUT VOID *Data
->
OUT VOID *Data OPTIONAL
The comments of Data parameter:
Data Points to the buffer which will hold the returned variable value.
->
Data Points to the buffer which will hold the returned variable value.
May be NULL with a zero DataSize in order to determine the size of the buffer needed.
The patch is to follow the spec to update the definition.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch updates the HTTP Boot driver to install a default HTTP Callback protocol
if the platform doesn't provide one. This callback implementation will print the
boot file download progress in percentage format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Return EFI_INVALID_PARAMETER in LocateProtocol for Protocol==NULL to
follow UEFI 2.7 spec
PiSmmCore is also updated as the EFI_SMM_SYSTEM_TABLE2.SmmLocateProtocol
is reusing the definition of EFI_LOCATE_PROTOCOL.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When building without LTO, gcc incorrectly resolves the hazards for
'PciRegBase’ when inlining, leading to "may be used uninitialized"
warnings (and hence build failure with -Werror).
Eliminate this warning by explicitly initializing the variable to 0.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=601
When installing configuration table and the original
gDxeCoreST->ConfigurationTable[] buffer happen to be not big enough to
add a new table, the CoreInstallConfigurationTable() enter the branch
of line 113 in InstallConfigurationTable.c to free the old
gDxeCoreST->ConfigurationTable[] buffer and allocate a new bigger one.
The problem happens at line 139 CoreFreePool(), which is to free the
old gDxeCoreST->ConfigurationTable[] buffer. The CoreFreePool()'s
behavior is to free the buffer firstly, then call the
InstallMemoryAttributesTableOnMemoryAllocation (PoolType) to update
the EfiRuntimeServices type memory info, the
CoreInstallConfigurationTable() will be re-entered by CoreFreePool()
in its calling stack, then use-after-free read error will happen at
line 59 of InstallConfigurationTable.c and use-after-free write error
will happen at line 151 and 152 of InstallConfigurationTable.c.
The patch is to update System table to the new table pointer before
calling CoreFreePool() to free the old table.
The case above is in DxeCore, but not in PiSmmCore.
The change in PiSmmCore is to be consistent with DxeCore.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Steven Shi <steven.shi@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Steven Shi <steven.shi@intel.com>
Update comments in SimpleTextInEx according to UEFI 2.7.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add more CPU ID which can support SmmFeatureControl,
according to IA32 SDM.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=592
In function UpdateConsoleContent, we compare console name
with "ErrOut" string to check whether the content in console
Error device page has been changed. But when call function
UpdateConsoleContent, we pass console name as "ConErr" by mistake.
This patch is to fix the inconsistent issue.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Current code for case "TPM not working properly" uses the predefined
macro __FILE__ in debug format string, but uses predefined macro
__LINE__ as parameter, and it also uses multiple pairs of "" in debug
format string.
To be simple and clear, this patch is to update the code to just use
"DriverEntry: TPM not working properly\n" as the debug message.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Found few instances where IPv4 and DHCPv4 spelled incorrectly
as IP4 and DHCP4 respectively.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
STR_GEN_ERR_NOT_FOUND is added and currently is only
used by alias command. This string template can be used
by other commands as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Commit 4275f38507 ("OvmfPkg/AcpiPlatformDxe: alloc blobs from 64-bit
space unless restricted") introduced a variable which is [incorrectly]
identified by GCC as being potentially uninitialized. So let's just set
it to NULL before use.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Related to the ECR for support of HTTP Redirect (308)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Couple of instances had IP4 mentioned, instead of IPv4.
Changing all to IPv4 to maintain consistency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The Readme.txt contains instructions about how to integrate Shell
into Nt32. Actually Nt32 already contains a macro USE_OLD_SHELL to
choose OLD or NEW Shell.
So remove this txt file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
... by narrower than 8-byte ADD_POINTER references.
Introduce the CollectAllocationsRestrictedTo32Bit() function, which
iterates over the linker/loader script, and collects the names of the
fw_cfg blobs that are referenced by QEMU_LOADER_ADD_POINTER.PointeeFile
fields, such that QEMU_LOADER_ADD_POINTER.PointerSize is less than 8. This
means that the pointee blob's address will have to be patched into a
narrower-than-8 byte pointer field, hence the pointee blob must not be
allocated from 64-bit address space.
In ProcessCmdAllocate(), consult these restrictions when setting the
maximum address for gBS->AllocatePages(). The default is now MAX_UINT64,
unless restricted like described above to the pre-patch MAX_UINT32 limit.
In combination with Ard's QEMU commit cb51ac2ffe36 ("hw/arm/virt: generate
64-bit addressable ACPI objects", 2017-04-10), this patch enables
OvmfPkg/AcpiPlatformDxe to work entirely above the 4GB mark.
(An upcoming / planned aarch64 QEMU machine type will have no RAM under
4GB at all. Plus, moving the allocations higher is beneficial to the
current "virt" machine type as well; in Ard's words: "having all firmware
allocations inside the same 1 GB (or 512 MB for 64k pages) frame reduces
the TLB footprint".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch is used to update supplicant.h and wifi2.h
to meet UEFI 2.7 definition. Add EfiSupplicant80211PMK
field in EFI_SUPPLICANT_DATA_TYPE and change **NetworkDesc
to NetworkDesc[1] in EFI_80211_GET_NETWORKS_RESULT.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Fix the bug that use same FMP_PAYLOAD in different capsule file. Because
in previous FMP generation, the FMP already be generated, so we don't
need to regenerate again.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Fix a Incremental build failure. The case is: Both A and B package will
include a same .h file, and in the driver's packages section, A
package is listed before B package, so we will use the .h file in the A
package and build success, then we directly delete the .h file in package
A, it cause increment build failure since in the AutoGenTimeStamp file
the .h file in A can't be found.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The original code expects the Unicode stream from pipe doesn't
contains the Unicode BOM.
But that's not true.
Commit [9ed21946c7] changes
CreateFileInterfaceMem() to add the BOM for Unicode stream.
When parse pipe support was firstly added, a private implementation
ParseReturnStdInLine() was created to specially handle
the Unicode stream without BOM. Since now the Unicode steam contains
BOM, the private implementation can be removed and
ShellFileHandleReturnLine() can be used directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
UEFI Spec 2.7 introduces BluetoothAttribute and BluetoothLeConfig
protocols. The patch adds the definitions for them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
UEFI spec 2.7 adds new EFI_BLUETOOTH_CONFIG_DATA_TYPE types.
The patch adds them to the header file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=587
The Status check in "if (!EFI_ERROR (Status))" condition is useless,
it should be NULL pointer check. And this patch also fixes a typo
"continous" to "continuous".
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Ard Biesheuvel
Star Zeng
Fu Siyuan
Hao Wu
Leif Lindholm
Shi, Steven
Dandan Bi
Jiewen Yao
Jiaxin Wu
Ruiyu Ni
Tapan Shah
hegdenag
Laszlo Ersek
Wang, Fan
Yonghong Zhu