VirtioGpuDxe uses one virtio ring, for VIRTIO_GPU_CONTROL_QUEUE.
Map it for bus master common buffer operation with VirtioRingMap(), so
that it can be accessed equally by both guest and hypervisor even if an
IOMMU is used. (VirtioRingInit() already allocates the ring suitably for
this, see commit b0338c5329, "OvmfPkg/VirtioLib: alloc VRING buffer with
AllocateSharedPages()", 2017-08-23).
Pass the resultant translation offset ("RingBaseShift"), from system
memory address to bus master device address, to VIRTIO_SET_QUEUE_ADDRESS.
Unmap the ring in all contexts where the ring becomes unused (these
contexts are mutually exclusive):
- in VirtioGpuInit(): the ring has been mapped, but we cannot complete the
virtio initialization for another reason,
- in VirtioGpuUninit(): the virtio initialization has succeeded, but
VirtioGpuDriverBindingStart() fails for another reason, or
VirtioGpuDriverBindingStop() unbinds the device after use,
- in VirtioGpuExitBoot(): ExitBootServices() is called after
VirtioGpuDriverBindingStart() has successfully bound the device.
(Unmapping the ring does not change the UEFI memory map.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Log all relevant IN parameters on entry. (There are only IN parameters.)
Beautify the format string.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Log all relevant IN and IN OUT parameters on entry.
(Note that the HostAddress parameter is IN OUT rather than OUT due to
historical reasons. The "IN EFI_ALLOCATE_TYPE Type" parameter is now to be
ignored, but historically it could be set to AllocateMaxAddress for
example, and for that HostAddress had to be IN OUT.)
When exiting with success, log all relevant OUT parameters (i.e.,
HostAddress). Also log the new (internal) StashBuffer address, on which
IoMmuMap() and IoMmuUnmap() rely on, for BusMasterCommonBuffer operations
(in-place decryption and encryption, respectively).
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
The only important external information for this function, and for the
human looking at the log, is the Mapping input parameter. Log it on entry.
Stop logging the contents of the MAP_INFO structure pointed-to by Mapping.
Thanks to the previous patch, we can now associate IoMmuUnmap() messages
with IoMmuMap() messages -- and thereby with MAP_INFO contents -- purely
via Mapping.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Log all relevant IN and IN OUT parameters on entry.
When exiting with success, log all relevant OUT and IN OUT parameters.
Don't log OUT and IN OUT parameters that are never set or changed after
entering the function (i.e., *NumberOfBytes).
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Debug messages that start as natural (English) language phrases (after the
debug prefix) should uniformly begin with lower-case or upper-case. In
SetMemoryEncDec() we have a mixture now. Stick with lower-case.
(Upper-case is better for full sentences that also end with punctuation.)
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In SetMemoryEncDec(), we have four locations where we (a) log a message on
the DEBUG_WARN level that says "ERROR", (b) return the status code
RETURN_NO_MAPPING right after.
These messages clearly describe actual errors (bad PML4, PDPE, PDE, PTE).
Promote their debug levels to DEBUG_ERROR, and remove the word "ERROR"
from the messages.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In the SetMemoryEncDec() function, the way we currently report
PhysicalAddress is not uniform:
- mostly we say "for %lx",
- in one spot we say "at %lx" (even though the 2MB page being split does
not live *at* PhysicalAddress, instead it maps PhysicalAddress),
- in another spot we don't log PhysicalAddress at all (when splitting a
1GB page).
Unify this, using the format string "for Physical=0x%Lx".
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
None of the DEBUG macro invocations in SetMemoryEncDec() fit on a single
line. Break them to multiple lines, for (a) conforming to the coding style
spec, (b) easier modification in later patches.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Now that we have a generic DmaLib implementation for non-coherent DMA,
let's get rid of the ARM specific one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
We are not recieving the response from memory card after
sending CMD 12. It was not resulting in any failure but
we should recieve response after sending a command.
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
VirtioScsiDxe driver has been updated to use IOMMU-like member functions
from VIRTIO_DEVICE_PROTOCOL to translate the system physical address to
device address. We do not need to do anything special when
VIRTIO_F_IOMMU_PLATFORM bit is present hence treat it in parallel with
VIRTIO_F_VERSION_1.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When device is behind the IOMMU, driver is require to pass the device
address of virtio request, response and any memory referenced by those
request/response to the bus master.
The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to
map request and response buffers system physical address to the device
address.
- If the buffer need to be accessed by both the processor and a bus
master then map with BusMasterCommonBuffer.
- If the buffer need to be accessed for a write operation by a bus master
then map with BusMasterWrite.
However, after a BusMasterWrite Unmap() failure, error reporting via
EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET would be very complex,
therefore we map such buffers too with BusMasterCommonBuffer.
- If the buffer need to be accessed for a read operation by a bus master
then map with BusMasterRead.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: restore lost sentence/paragraph in commit message]
[lersek@redhat.com: reindent/reflow "InDataBuffer" comment block]
[lersek@redhat.com: cast arg, not result, of EFI_SIZE_TO_PAGES() to UINTN]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When virtio request fails we return EFI_DEVICE_ERROR, as per the spec
EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru() member function is required
to implement elaborated error reporting.
The patch refactors out entire block of the code that creates the host
adapter error into a separate helper function (ReportHostAdapterError).
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: fix style & typo in ReportHostAdapterError() comment]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When device is behind the IOMMU then driver need to pass the device
address when programing the bus master. The patch uses VirtioRingMap() to
map the VRING system physical address to device address.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Now that ArmDmaLib can take care of its own memory allocation needs,
let's get rid of UncachedMemoryAllocationLib entirely. This forces
platforms to declare the required semantics (non-cache coherent DMA,
whichever way it is implemented), rather than using uncached memory
allocations directly, which may not always be the right choice, and
prevents sharing of drivers between platforms if one is cache coherent
and the other is not.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
While modern AARCH64 server systems use ACPI for describing the platform
topology to the OS, ARM systems and AARCH64 outside of the server space
mostly use device tree binaries, which are compiled from device tree
source files using the device tree compiler.
Currently, such source files and binaries may be kept in the EDK2 platform
trees, but are not integrated with the build, which means they need to be
kept in sync and recompiled manually, which is cumbersome.
So let's wire up BaseTools support for them: add tool definitions for the
DTC compiler and preprocessor flags that allow these source files to use
FixedPcd expressions and other macros defined by AutoGen.h
This way, a device tree binary can be built from source and emitted into
a FFS file automatically using something like:
DeviceTree.inf:
[Defines]
INF_VERSION = 0x00010019
BASE_NAME = SomePlatformDeviceTree
FILE_GUID = 25462CDA-221F-47DF-AC1D-259CFAA4E326 # gDtPlatformDefaultDtbFileGuid
MODULE_TYPE = USER_DEFINED
VERSION_STRING = 1.0
[Sources]
SomePlatform.dts
[Packages]
MdePkg/MdePkg.dec
SomePlatform.fdf:
INF RuleOverride = DTB xxx/yyy/DeviceTree.inf
[Rule.Common.USER_DEFINED.DTB]
FILE FREEFORM = $(NAMED_GUID) {
RAW BIN |.dtb
}
where it can be picked at runtime by the DTB loader that may refer to it
using gDtPlatformDefaultDtbFileGuid.
Note that this is very similar to how ACPI tables may be emitted into a
FFS file with a known GUID and picked up by AcpiTableDxe at runtime.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI has description said If an AP is enabled, then the implementation must
guarantee that a complete initialization sequence is performed on the AP,
so the AP is in a state that is compatible with an MP operating system.
Current implementation just set the AP to idle state when enable this AP
which is not follow spec. This patch fix it.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
when "RequestIsWrite" is FALSE -- i.e., the CPU wants data from
the device, we map "Buffer" for VirtioOperationBusMasterWrite. In
this case, checking the return status of
Dev->VirtIo->UnmapSharedBuffer (Dev->VirtIo, BufferMapping);
is must. If the unmapping fails, then "Buffer" will not contain the
actual data from the device, and we must fail the request with
EFI_DEVICE_ERROR.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: fix typos in subject]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Replace the reference to the ARM specific ArmDmaLib with a reference
to the generic NonCoherentDmaLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Replace the reference to the ARM specific ArmDmaLib with a reference
to the generic NonCoherentDmaLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The non-coherent DmaLib implementation in ArmDmaLib no longer relies on
anything in ArmPkg. So clone it into EmbeddedPkg, and rename it to
NonCoherentDmaLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Bring CoherentDmaLib in line with ArmDmaLib, and add support for
defining a static offset between the host's and the bus master's
view of memory.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The name NullDmaLib suggests that this library is a placeholder that
only exists to fulfil formal dependencies on the DmaLib library class
without providing an actual implementation. This is not the case, though:
NullDmaLib does implement DmaLib fully, but doing so simply requires very
little effort on a cache coherent platform. So let's rename it to
CoherentDmaLib instead.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
EmbeddedPkg should be architecture agnostic, but a few issues were
preventing other architectures to build individual components directly
from the .dsc:
- The AndroidBoot/AndroidFastBoot support have a dependency on BdsLib,
which only has resolutions for ARM/AARCH64. Move them to an
arch-restricted Components section.
- The Isp1761UsbDxe driver is not 64-bit compatible. It should be
converted to UEFI driver model, but for now just move it to a new
Components.ARM section. (Also delete non-useful declaration for
AARCH64 in EmbeddedPkg.dec.)
- Lan9118Dxe has an unused ArmLib entry. Drop it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In this sample driver, if (0) {...} else {...} statements were used to
illustrate two different using scenarios.
This comment refines the coding style by substituting the 'if (0)'
statement with comments to select sample codes for different cases.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This driver does not rely on DmaLib at all, so don't declare it as a
dependency.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The virt targets never use non-coherent DMA, so there is no point
in having a shared DmaLib library class resolution pointing to
ArmDmaLib. So drop it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Some commands may cause current directory or even current mapping
become invalid. For example, "MAP" after unplugging the USB thumb
key may cause current mapping "FS0:" disappear.
This patch updates the CWD and current mapping when commands return.
It also causes the command prompt change to default "Shell>".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by Jaben Carsey <jaben.carsey@intel.com>
When "map -r" runs, the mapping list is re-created but
gShellCurMapping still points to the old mapping list which
is already destroyed.
The patch updates the gShellCurMapping to point to the correct
location in the new mapping list.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by Jaben Carsey <jaben.carsey@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=680
Adding ARM and AARCH64 to SUPPORTED_ARCHITECTURES in SecurityPkg.dsc
to enable RngTest module build, since this is one platform-independent
application.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
There's a small window between
- AllocFwCfgDmaAccessBuffer() mapping the new FW_CFG_DMA_ACCESS object for
common buffer operation (i.e., decrypting it), and
- InternalQemuFwCfgDmaBytes() setting the fields of the object.
In this window, earlier garbage in the object is "leaked" to the
hypervisor. So zero the object before we decrypt it.
(This commit message references AMD SEV directly, because QemuFwCfgDxeLib
is not *generally* enabled for IOMMU operation just yet, unlike our goal
for the virtio infrastructure. Instead, QemuFwCfgDxeLib uses
MemEncryptSevLib explicitly to detect SEV, and then relies on IOMMU
protocol behavior that is specific to SEV. At this point, this is by
design.)
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Remove a false dependency on UncachedMemoryAllocationLib, and fix the
broken build while we're at it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ArmDmaLib no longer depends on UncachedMemoryAllocationLib, so we can
remove the library class resolutions for it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
DmaLib's purpose is to manage memory that is shared between the host
and DMA capable devices. In some cases, this requires a larger alignment
than page size, and we currently don't cater for that in DmaLib. So add
a variant of DmaAllocateBuffer () that takes an alignment parameter.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=681
For string opcode,when checking the valid string length,
it should exclude the Null-terminated character.
And for string in NameValue storage, need to exclude
the varname and also need to convert the Config string
length to Unicode string length.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In PI 1.5 version, system management mode name(SMM) has been changed
to Management Mode(MM). It impacts the current code which still use
SMM/Smram/SMI keywords. This patch update the original files which
related to old SMM modules, also keep the compatible with old SMM
related drivers.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In PI 1.5 version, system management mode name(SMM) has been changed
to Management Mode(MM). It impacts the current code which still use
SMM/Smram/SMI keywords. This patch add new definition which use
MM/MmRam/MMI keywords to follow new spec definitions.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=676
Add LLVM39 and LLVM40 support in CLANG38 toolchain
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When EDK_TOOLS_BIN is not set, %EDK_TOOLS_PATH%\Bin\Win32 will be used as the
binary tool directory. But, %EDK_TOOLS_PATH%\Bin\Win32 may not exist. On this
case, toolsetup.bat should continue to do the other setting, such VS tool
chain and tool conf file copy.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=582
Don't enable this option in the default setting, because it may cause VS2015
linker crash. Platform can enable this option in PlatformPkg.dsc like below:
[BuildOptions]
*_*_*_DLINK2_FLAGS = /WHOLEARCHIVE
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Laszlo Ersek
Ard Biesheuvel
Meenakshi Aggarwal
Brijesh Singh
Leif Lindholm
Liming Gao
Eric Dong
Hao Wu
Ruiyu Ni
Huajing Li
Long Qin
Bi, Dandan
Shi, Steven